ramips: add WHR-1166 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41447
This commit is contained in:
John Crispin 2014-07-01 10:26:42 +00:00
parent 3c88de0d47
commit 4ddc0f9ff3
5 changed files with 148 additions and 2 deletions

View file

@ -110,6 +110,7 @@ case "$FIRMWARE" in
whr-g300n | \
whr-300hp2 | \
whr-600d | \
whr-1166d | \
wl-330n | \
wl-330n3g | \
wl-351 | \
@ -141,7 +142,7 @@ case "$FIRMWARE" in
cy-swr1100)
rt2x00_eeprom_extract "factory" 8192 512
;;
rt-n56u | whr-600d)
rt-n56u | whr-600d | whr-1166d)
rt2x00_eeprom_extract "factory" 32768 512
;;
esac

View file

@ -176,7 +176,8 @@ case $board in
set_wifi_led "asus:blue:wifi"
;;
whr-300hp2 |\
whr-600d)
whr-600d |\
whr-1166d)
ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
;;

View file

@ -241,6 +241,9 @@ ramips_board_detect() {
*"WHR-600D")
name="whr-600d"
;;
*"WHR-1166D")
name="whr-1166d"
;;
*"WHR-G300N")
name="whr-g300n"
;;

View file

@ -0,0 +1,138 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-1166D";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xeb0000>;
};
partition@e00000 {
label = "usercfg";
reg = <0xe00000 0x100000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
pcie@10140000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
status {
label = "buffalo:green:status";
gpios = <&gpio0 8 1>;
};
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
status2 {
label = "buffalo:orange:status";
gpios = <&gpio0 10 1>;
};
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x100>;
};
s2 {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x101>;
};
s3 {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x102>;
};
s4 {
label = "bridge";
gpios = <&gpio2 15 1>;
linux,code = <0x103>;
};
};
};

View file

@ -705,6 +705,8 @@ Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N5
whr_300hp2_mtd_size=7012352
Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
whr_1166d_mtd_size=15400960
Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
na930_mtd_size=20971520
@ -720,6 +722,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR-810L,$(1))
$(call Image/Build/Profile/WHR300HP2,$(1))
$(call Image/Build/Profile/WHR600D,$(1))
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/NA930,$(1))
endef
endif