KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
24543 commits 1 branch 0 tags 154 MiB
Commit graph

1962 commits

Author SHA1 Message Date
Gabor Juhos
f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
 2012-12-25 18:45:32 +00:00
Gabor Juhos
1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
 2012-12-25 18:45:29 +00:00
Gabor Juhos
64d31e6c6b ar71xx: register the second ethernet interface on the AP136 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
 2012-12-22 12:12:50 +00:00
Gabor Juhos
5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos
84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
 2012-12-22 12:12:46 +00:00
Gabor Juhos
4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos
9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
 2012-12-22 12:12:41 +00:00
Gabor Juhos
ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
 2012-12-22 12:12:40 +00:00
Gabor Juhos
a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos
e108cb91c0 ar71xx: rename fix-ar933x-reset patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34798
 2012-12-20 14:13:16 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Gabor Juhos
5f82aa4d15 ar71xx: merge machine patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34783
 2012-12-19 08:50:45 +00:00
Gabor Juhos
cf99770800 ar71xx: build image for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
 2012-12-19 08:50:44 +00:00
Gabor Juhos
b1b7aa674e ar71xx: add user-space support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: add uci-defaults/network support]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34780
 2012-12-19 08:50:41 +00:00
Gabor Juhos
0767605d17 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
 2012-12-19 08:50:35 +00:00
Gabor Juhos
149534f3ed ar71xx: image: add OpenMesh profile 
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
 2012-12-18 15:16:05 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
fc0da6852e ar71xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743
 2012-12-17 22:28:09 +00:00
Gabor Juhos
61d715505c ar71xx: add profile and build image for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
 2012-12-17 12:28:21 +00:00
Gabor Juhos
abbd18776e ar71xx: add user-space support for UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34728
 2012-12-17 12:28:11 +00:00
Gabor Juhos
ff3f28265f ar71xx: add kernel support for the UniFi AP Pro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727
 2012-12-17 12:28:02 +00:00
Gabor Juhos
2e2c88b625 ar71xx: reorder some patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34674
 2012-12-14 07:16:56 +00:00
Gabor Juhos
34411a0cbd ar71xx: merge unifi outdoor patch into the ubnt-xm one 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34673
 2012-12-14 07:16:50 +00:00
Gabor Juhos
d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300 
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
 2012-12-12 16:49:52 +00:00
Gabor Juhos
dcdfcb75f0 ar71xx: add user-space support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34649
 2012-12-12 16:49:51 +00:00
Gabor Juhos
bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
 2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74 ar71xx: add ap91_pci_init_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
 2012-12-12 16:49:48 +00:00
Gabor Juhos
d7cebac243 ar71xx: add ath79_wmac_register_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34645
 2012-12-12 16:49:47 +00:00
Gabor Juhos
ec26814b0e ar71xx: refresh 3.3 patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34644
 2012-12-12 16:49:46 +00:00
Gabor Juhos
cdfc300948 ar71xx: remove superfluous USB patches for 3.3 
SVN-Revision: 34643
 2012-12-12 16:49:43 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
Gabor Juhos
3cbc1a49e2 ar71xx: load ar934x_nfc driver earlier 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34589
 2012-12-10 10:38:11 +00:00
Gabor Juhos
1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
 2012-12-10 10:38:07 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos
47f9b2a110 ar71xx: TP-LINK also has a family TL-WDR 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34577
 2012-12-07 19:10:57 +00:00
Gabor Juhos
d7ba2b4840 ar71xx: add profile and build image for TP-LINK TL-WA801N/ND 
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34576
 2012-12-07 19:10:56 +00:00
Gabor Juhos
4f5defdc3b ar71xx: switch to 3.6.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34414
 2012-11-29 17:53:42 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Gabor Juhos
b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board 
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
 2012-11-23 20:55:34 +00:00
Gabor Juhos
188908e885 ar71xx: make rb750_nand driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
 2012-11-20 16:29:43 +00:00
Gabor Juhos
8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
 2012-11-20 16:29:42 +00:00
Gabor Juhos
4468fd7ae4 ar71xx: refresh rb4xx_nand patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34277
 2012-11-20 15:53:17 +00:00
Gabor Juhos
46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c 
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
 2012-11-20 14:40:22 +00:00
Gabor Juhos
674b91ce0e ar71xx: fix GPIO function selection for AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34275
 2012-11-20 14:27:17 +00:00
Gabor Juhos
d833ca527d ar71xx: restore rb4xx kernel partition size to the original value 
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
 2012-11-20 12:17:45 +00:00
Gabor Juhos
33a99ce46b ar71xx: install lzma compressed elf kernel image from wget2nand 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34273
 2012-11-20 12:17:44 +00:00
Gabor Juhos
68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image 
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
 2012-11-20 12:17:43 +00:00
Gabor Juhos
97867f8717 ar71xx/image: relink loader.elf image to LOADADDR 
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
 2012-11-20 12:17:41 +00:00
Gabor Juhos
8e4cefc7f8 refresh all kernel configurations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34267
 2012-11-20 07:19:06 +00:00
Gabor Juhos
d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images 
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
 2012-11-18 20:25:13 +00:00
Gabor Juhos
169e596268 ar71xx: add user-space support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34240
 2012-11-18 10:18:02 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
31881357af ar71xx: create profile and build image for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
 2012-11-18 09:32:41 +00:00
Gabor Juhos
9da2c85b67 ar71xx: enable sysupgrade for the OpenMesh MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34235
 2012-11-18 09:32:39 +00:00
Gabor Juhos
6380301d01 ar71xx: rename om2p.sh upgrade script to openmesh.sh 
It will be used on other boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34234
 2012-11-18 09:32:37 +00:00
Gabor Juhos
d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
 2012-11-18 09:32:36 +00:00
Gabor Juhos
c3174179b7 ar71xx: add user-space support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34232
 2012-11-18 09:32:35 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Gabor Juhos
7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh 
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
 2012-11-14 14:18:33 +00:00
Gabor Juhos
ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
 2012-11-13 20:57:19 +00:00
Gabor Juhos
9c5c079329 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34197
 2012-11-13 20:57:18 +00:00
Gabor Juhos
75c1d3ccc2 ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device 
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34196
 2012-11-13 20:57:17 +00:00
Gabor Juhos
7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices 
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
 2012-11-13 20:57:15 +00:00
Gabor Juhos
62c8ff19ad ar71xx: add profile and build image for the TL-WA7510N board 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34190
 2012-11-13 14:48:03 +00:00
Gabor Juhos
165b7d2173 ar71xx: user space support for the TL-WA7510N 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34188
 2012-11-13 14:48:01 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
ce9d4fadfa ar71xx: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34186
 2012-11-13 14:47:58 +00:00
Gabor Juhos
e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper 
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
 2012-11-05 13:23:28 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
 2012-11-04 21:12:20 +00:00
Gabor Juhos
b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards 
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
 2012-11-04 20:15:18 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
 2012-10-29 17:24:30 +00:00
Gabor Juhos
e4db63fd64 ar71xx: add initial support for 3.6 
The nand subtarget is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33983
 2012-10-28 19:52:02 +00:00
Gabor Juhos
a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers 
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
 2012-10-28 12:21:15 +00:00
Gabor Juhos
e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6 
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
 2012-10-27 17:11:06 +00:00
Gabor Juhos
3a86affcdd ar71xx: enable sysupgrade for the CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33960
 2012-10-27 08:55:42 +00:00
Gabor Juhos
e99d557c08 ar71xx: add profile and build image for the CAP4200AG 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33958
 2012-10-27 08:55:40 +00:00
Gabor Juhos
9287e0c863 ar71xx: add user-space part for the CAP4200AG 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33957
 2012-10-27 08:55:39 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
 2012-10-27 08:55:38 +00:00
Gabor Juhos
3b7cb4eb4a ar71xx: add ath79_wmac_disable_[25]ghz helpers 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33955
 2012-10-27 08:55:37 +00:00
Gabor Juhos
269872fe1e ar71xx: use mtd_read in wrt160nl_part 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
 2012-10-27 07:57:58 +00:00
Gabor Juhos
973eda6077 ar71xx: use mtd_read in tplinkpart 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
 2012-10-27 07:57:57 +00:00
Gabor Juhos
28f3adc2ed ar71xx: generate 4,8,16M images for the WPE72 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33949
 2012-10-27 07:57:55 +00:00
Gabor Juhos
ff481a5518 ar71xx: reject TP-Link images containing a bootloader 
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33944
 2012-10-26 18:58:13 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
 2012-10-19 18:32:49 +00:00
Gabor Juhos
7a72f01a72 ar71xx: merge machine support patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33820
 2012-10-17 18:27:50 +00:00
Gabor Juhos
2e1bc1e15b ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33819
 2012-10-17 18:27:48 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
 2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
 2012-10-17 18:27:45 +00:00
Gabor Juhos
35a91a4fe8 ar71xx: OM2P-HS sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33803
 2012-10-17 08:26:05 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
 2012-10-17 08:26:01 +00:00
Gabor Juhos
f1283d8583 ar71xx: fix sysupgrade for jjPlus JWAP003 
[juhosg: change commit message]

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33769
 2012-10-14 16:24:26 +00:00
Gabor Juhos
1944f7b916 ar71xx: ew-dorin: added ethernet switch configuration 
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33768
 2012-10-14 16:24:25 +00:00
Gabor Juhos
62ab2b0da6 ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC 
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.

[juhosg: fix OpenMesh template instead of use of string substitution]

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33767
 2012-10-14 16:24:22 +00:00
Gabor Juhos
befb648642 ar71xx: build image for the TL-WR841N/ND v8 
SVN-Revision: 33623
 2012-10-04 20:16:06 +00:00
Gabor Juhos
02a85dfd85 ar71xx: user-space support for TL-WR841N/ND v8 
SVN-Revision: 33622
 2012-10-04 20:16:05 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board 
SVN-Revision: 33621
 2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
SVN-Revision: 33575
 2012-09-27 20:05:42 +00:00
Gabor Juhos
ffc0ea6c5d ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards 
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

SVN-Revision: 33540
 2012-09-25 12:57:41 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU 
SVN-Revision: 33539
 2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
SVN-Revision: 33538
 2012-09-25 12:57:38 +00:00
Gabor Juhos
e2504a977a ar71xx: add missing backslash to uci-defaults/leds (closes #12240) 
SVN-Revision: 33537
 2012-09-25 12:49:43 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

SVN-Revision: 33535
 2012-09-24 18:45:56 +00:00
Gabor Juhos
79ffd1032a ar71xx: fix a typo in TEW-637GRU image names 
SVN-Revision: 33460
 2012-09-18 14:32:25 +00:00
Gabor Juhos
9a11f882d7 ar71xx: revert DIR-825-B1 wholeflash image support. 
It should be implemmented in a cleaner way.

This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"

SVN-Revision: 33459
 2012-09-18 14:30:57 +00:00
Gabor Juhos
a7c5c4390a ar71xx: register the NAND flash controller device on DB120 
SVN-Revision: 33455
 2012-09-17 20:30:57 +00:00
Gabor Juhos
7c85646176 ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
SVN-Revision: 33454
 2012-09-17 20:30:55 +00:00
Gabor Juhos
3bdf0bc36f ar71xx: ar934x_nfc: increase DMA retry count 
SVN-Revision: 33453
 2012-09-17 20:30:54 +00:00
Gabor Juhos
b7cb43f6a6 ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
SVN-Revision: 33452
 2012-09-17 20:30:53 +00:00
Gabor Juhos
96dde2e591 ar71xx: ar934x_nfc: fix RNDOUT operation 
SVN-Revision: 33451
 2012-09-17 20:30:51 +00:00
Gabor Juhos
338b698fb6 ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
SVN-Revision: 33450
 2012-09-17 20:30:50 +00:00
Daniel Dickinson
0f254b4b67 dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). 
SVN-Revision: 33447
 2012-09-17 14:17:12 +00:00
Felix Fietkau
e8893fdf7a ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x 
SVN-Revision: 33446
 2012-09-17 11:17:29 +00:00
Felix Fietkau
ed14ffc7da ar71xx: fix WP543 image builds 
SVN-Revision: 33413
 2012-09-15 10:21:21 +00:00
Gabor Juhos
61dc6e65c0 ar71xx: merge machine support patches 
SVN-Revision: 33389
 2012-09-13 07:26:28 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011 
SVN-Revision: 33388
 2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller 
SVN-Revision: 33387
 2012-09-13 07:26:25 +00:00
Gabor Juhos
10cd35c0e7 ar71xx: package the AR934x NAND driver module 
SVN-Revision: 33386
 2012-09-13 07:26:23 +00:00
Gabor Juhos
1e5fdbeae5 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
SVN-Revision: 33385
 2012-09-13 07:26:22 +00:00
Gabor Juhos
40a5f5c16e ar71xx: define NAND controller base address and register size for AR934X/QCA955x 
SVN-Revision: 33382
 2012-09-12 19:06:38 +00:00
Gabor Juhos
4ee5b528de ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x 
SVN-Revision: 33362
 2012-09-10 14:38:01 +00:00
Gabor Juhos
2e0e38ad69 ar71xx: fix QCA955X_EHCI_SIZE 
SVN-Revision: 33360
 2012-09-10 14:32:54 +00:00
Jo-Philipp Wich
caa66bd150 fix description of nand/Ath5k profile (#12149) 
SVN-Revision: 33352
 2012-09-09 21:40:26 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD 
SVN-Revision: 33349
 2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
SVN-Revision: 33348
 2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines 
SVN-Revision: 33347
 2012-09-09 14:05:28 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011 
SVN-Revision: 33345
 2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
 2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
SVN-Revision: 33343
 2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation 
SVN-Revision: 33342
 2012-09-09 14:05:17 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751 
SVN-Revision: 33338
 2012-09-08 17:51:56 +00:00
Gabor Juhos
73df240bb3 ar71xx: add library code for RLE decoding 
It will be used for the MikroTik boards.

SVN-Revision: 33337
 2012-09-08 17:51:54 +00:00
Gabor Juhos
f4be8a76de ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x 
SVN-Revision: 33335
 2012-09-08 13:39:09 +00:00
Gabor Juhos
70d00ac64e ar71xx: refresh kernel patches 
SVN-Revision: 33334
 2012-09-08 13:39:04 +00:00
Daniel Dickinson
c3b7139ab2 dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. 
SVN-Revision: 33326
 2012-09-06 18:15:26 +00:00
Gabor Juhos
069f544d2b ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x 
SVN-Revision: 33318
 2012-09-05 19:26:50 +00:00
Gabor Juhos
81bb246a8d ar71xx: add rssileds to package set in profile for devices which got them. 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33317
 2012-09-05 19:22:51 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

SVN-Revision: 33310
 2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
 2012-08-29 10:37:54 +00:00
Gabor Juhos
02cb5f9dcd ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds 
SVN-Revision: 33308
 2012-08-29 10:37:53 +00:00
Gabor Juhos
0c5688cc38 ar71xx: image: fix Profile name for TL-WA701 (closes #12094) 
SVN-Revision: 33295
 2012-08-29 10:37:30 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support 
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
 2012-08-29 10:11:55 +00:00
Gabor Juhos
f2030c3113 ar71xx: add profile for Allnet devices 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33287
 2012-08-27 14:55:38 +00:00
Gabor Juhos
d65c06c15c ar71xx: generate image for ALL0315N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33286
 2012-08-27 14:55:37 +00:00
Gabor Juhos
4079f3163f ar71xx: sysupgrade for the ALL0315N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33285
 2012-08-27 14:55:36 +00:00
Gabor Juhos
abffa4ecfb ar71xx: rename all0258n.sh to allnet.sh 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33284
 2012-08-27 14:55:35 +00:00
Gabor Juhos
1d96b0275c ar71xx: detect ALL0315N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33282
 2012-08-27 14:55:32 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
 2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
 2012-08-27 14:55:26 +00:00
Gabor Juhos
5a9c7fda3e ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N 
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.

The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.

Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:

for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
	| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
		grep -q ,$i, Makefile || echo $i;
done > missing-boards.new

Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33274
 2012-08-26 08:15:11 +00:00
Gabor Juhos
f3d5edffdc ar71xx: image: fix TL-WR1043ND board id (#12079) 
SVN-Revision: 33272
 2012-08-26 06:30:37 +00:00
Gabor Juhos
773b33d7d2 ar71xx: image: group and sort {Single,Multi}Profiles 
SVN-Revision: 33264
 2012-08-23 13:17:47 +00:00
Gabor Juhos
a5e0eb0d95 ar71xx: image: group and sort mtdlayout definitions 
SVN-Revision: 33263
 2012-08-23 13:14:35 +00:00
Gabor Juhos
f0ad972aba ar71xx: image: use the MultiProfile helper for the Madwifi profile 
SVN-Revision: 33262
 2012-08-23 13:11:25 +00:00
Gabor Juhos
333f030b79 ar71xx: image: automatically build a list of SingleProfiles 
Use that for Default/Minimal profiles.

SVN-Revision: 33261
 2012-08-23 13:08:15 +00:00
Gabor Juhos
5dce77837f ar71xx: image: use the new helpers for the ZyXEL images 
SVN-Revision: 33260
 2012-08-23 13:05:05 +00:00
Gabor Juhos
be4be2d82a ar71xx: image: use the new helpers for the Zcomax images 
SVN-Revision: 33259
 2012-08-23 13:01:55 +00:00
Gabor Juhos
74bdb68ea4 ar71xx: image: use the new helpers for the WRT400 images 
SVN-Revision: 33258
 2012-08-23 12:58:45 +00:00
Gabor Juhos
8cf9a7b1c7 ar71xx: image: use the new helpers for the WZRHPG30XNH images 
SVN-Revision: 33257
 2012-08-23 12:55:35 +00:00
Gabor Juhos
c965d8ead8 ar71xx: image: use the new helpers for the WHRHPG300N images 
SVN-Revision: 33256
 2012-08-23 12:52:25 +00:00
Gabor Juhos
71af43a7c7 ar71xx: image: use the new helpers for the UBNTXM images 
SVN-Revision: 33255
 2012-08-23 12:49:15 +00:00
Gabor Juhos
097e9938b4 ar71xx: image: use the new helpers for the UBNT images 
SVN-Revision: 33254
 2012-08-23 12:46:06 +00:00
Gabor Juhos
216e9b7a92 ar71xx: image: use the new helpers for the TPLINKOLD images 
SVN-Revision: 33253
 2012-08-23 12:42:56 +00:00
Gabor Juhos
48d6081fa5 ar71xx: image: use the new helpers for the TPLINK-LZMA images 
SVN-Revision: 33252
 2012-08-23 12:39:46 +00:00
Gabor Juhos
8546e00157 ar71xx: image: use the new helpers for the TPLINK images 
SVN-Revision: 33251
 2012-08-23 12:36:35 +00:00
Gabor Juhos
27feea1070 ar71xx: image: use the new helpers for the Planex images 
SVN-Revision: 33250
 2012-08-23 12:33:25 +00:00
Gabor Juhos
4dbabe5c21 ar71xx: image: use the new helpers for the PB4X images 
SVN-Revision: 33249
 2012-08-23 12:30:15 +00:00
Gabor Juhos
bbaa0b9200 ar71xx: image: use the new helpers for the OpenMesh images 
SVN-Revision: 33248
 2012-08-23 12:27:06 +00:00
Gabor Juhos
4edc55f475 ar71xx: image: use the new helpers for the Netgear images 
SVN-Revision: 33247
 2012-08-23 12:23:56 +00:00
Gabor Juhos
d9f933b8b8 ar71xx: image: use the new helpers for the MyLoader images 
SVN-Revision: 33246
 2012-08-23 12:20:46 +00:00
Gabor Juhos
a409d0cf46 ar71xx: image: use the new helpers for the DIR825B1 images 
SVN-Revision: 33245
 2012-08-23 12:17:36 +00:00
Gabor Juhos
b7e05e3a59 ar71xx: image: use the new helpers for the CyberTAN images 
SVN-Revision: 33244
 2012-08-23 12:14:26 +00:00
Gabor Juhos
292f074ad7 ar71xx: image: use the new helpers for the Cameo933x images 
SVN-Revision: 33243
 2012-08-23 12:11:17 +00:00
Gabor Juhos
4c9a428614 ar71xx: image: use the new helpers for the Cameo913x images 
SVN-Revision: 33242
 2012-08-23 12:08:07 +00:00
Gabor Juhos
19d840980f ar71xx: image: use the new helpers for the Cameo7240 images 
SVN-Revision: 33241
 2012-08-23 12:04:57 +00:00
Gabor Juhos
ce91228e2b ar71xx: image: use the new helpers for the AthGzip images 
SVN-Revision: 33240
 2012-08-23 12:01:47 +00:00
Gabor Juhos
70e3dda99c ar71xx: image: use the new helpers for the AthLzma images 
SVN-Revision: 33239
 2012-08-23 11:58:37 +00:00
Gabor Juhos
31a88650d7 ar71xx: image: use the new helpers for the ALFA images 
SVN-Revision: 33238
 2012-08-23 11:55:27 +00:00
Gabor Juhos
2379e6f2a3 ar71xx: image: add a few helper functions 
These functions will be used to simplify the Makefile.

SVN-Revision: 33237
 2012-08-23 11:52:18 +00:00
Gabor Juhos
6ebc77af73 ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template 
SVN-Revision: 33236
 2012-08-23 11:49:07 +00:00
Gabor Juhos
a2f82cf7ec ar71xx: add profile and build image for the TEW-712BR 
SVN-Revision: 33234
 2012-08-22 20:18:44 +00:00
Gabor Juhos
8744f8d183 ar71xx: TEW-712BR user space support 
SVN-Revision: 33232
 2012-08-22 20:12:24 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board 
SVN-Revision: 33231
 2012-08-22 20:09:13 +00:00
Gabor Juhos
4073317695 ar71xx: fix serial clock calculation on AR933x 
Closes #12031.

SVN-Revision: 33230
 2012-08-22 19:11:10 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c 
SVN-Revision: 33227
 2012-08-22 12:42:59 +00:00
Gabor Juhos
dc13dc1d54 ar71xx: fix mtd layout of the AP113 
The 'mtdparts=' prefix and the name of the flash device is missing.

SVN-Revision: 33226
 2012-08-22 12:39:46 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias 
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
 2012-08-22 12:33:22 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600 
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
 2012-08-22 09:43:18 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED 
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
 2012-08-22 09:10:24 +00:00
Gabor Juhos
182a18a369 ar71xx: setup WLAN LED for the TL-WA901ND v2 
Closes #11889.

SVN-Revision: 33202
 2012-08-16 07:11:30 +00:00
Gabor Juhos
5fc4b7f5fd ar71xx: uci-defaults/leds for ALL0258N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33165
 2012-08-13 14:01:38 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling 
SVN-Revision: 32948
 2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE 
SVN-Revision: 32947
 2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
SVN-Revision: 32946
 2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader 
SVN-Revision: 32945
 2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
 2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
 2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
 2012-07-25 19:52:30 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk 
SVN-Revision: 32854
 2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules 
SVN-Revision: 32853
 2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk 
SVN-Revision: 32852
 2012-07-25 15:50:02 +00:00
Gabor Juhos
21de1b9d85 ar71xx: enable I2C_GPIO, the PB44 board needs that 
SVN-Revision: 32738
 2012-07-15 17:52:52 +00:00
Gabor Juhos
7daf851adf ar71xx: fix PB44 board detection 
SVN-Revision: 32737
 2012-07-15 17:52:50 +00:00
Gabor Juhos
c7fa38484c ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi 
SVN-Revision: 32736
 2012-07-15 17:52:48 +00:00
Gabor Juhos
33220828dc ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

SVN-Revision: 32683
 2012-07-12 13:38:40 +00:00
Gabor Juhos
d3c8852fd1 ar71xx: select ATH79_DEV_M25P80 for the WRT400N board 
SVN-Revision: 32679
 2012-07-12 08:34:22 +00:00
Gabor Juhos
c75c895d24 ar71xx: airrouter power led support 
This patch adds support for power led to Unifi Airrouter AP.

[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32678
 2012-07-12 08:34:21 +00:00
Gabor Juhos
466f010303 ar71xx: unifi reset button support 
This patch adds support for reset button to Ubiquiti UniFi AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32677
 2012-07-12 08:34:20 +00:00
Gabor Juhos
5ce9c90ca8 ar71xx: airrouter reset button support 
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32676
 2012-07-12 08:34:18 +00:00
Gabor Juhos
fe015f399f ar71xx: swizzle address for PCI byte/word access on AR71xx 
Closes #11683.

SVN-Revision: 32639
 2012-07-06 16:33:12 +00:00
Gabor Juhos
b39df5bb81 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board 
SVN-Revision: 32638
 2012-07-06 11:12:02 +00:00
Gabor Juhos
e258367c19 ar71xx: merge new board patches into the generic patch 
SVN-Revision: 32637
 2012-07-06 11:12:01 +00:00
Gabor Juhos
b020a7e7c3 ar71xx: OM2P LC sysupgrade patch 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32635
 2012-07-06 11:11:58 +00:00
Gabor Juhos
eabf96dc22 ar71xx: set firmware version for the TL-WR2543N 
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

SVN-Revision: 32617
 2012-07-05 16:25:31 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
 2012-07-05 16:25:26 +00:00
Gabor Juhos
b2f0476871 ar71xx: OM2P sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32613
 2012-07-05 08:26:57 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
 2012-07-05 08:26:53 +00:00
Gabor Juhos
1ea2a3cfd8 ar71xx: add profile and build image for the Atheros AP136 reference board 
SVN-Revision: 32609
 2012-07-05 08:26:51 +00:00
Gabor Juhos
b219848bfc ar71xx: AP136 user-space support 
SVN-Revision: 32608
 2012-07-05 08:26:50 +00:00
Gabor Juhos
f0cda65bb6 ar71xx: add initial support for the Qualcomm Atheros AP136 board 
SVN-Revision: 32607
 2012-07-05 08:26:48 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs 
SVN-Revision: 32606
 2012-07-05 08:26:47 +00:00
Gabor Juhos
7284cf73d6 ar71xx: refactor PCI code to allow registering multiple PCI controllers 
SVN-Revision: 32605
 2012-07-05 08:26:45 +00:00
Felix Fietkau
bfef2d17eb ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) 
SVN-Revision: 32599
 2012-07-04 10:55:56 +00:00
Gabor Juhos
b8618fd3f2 ar71xx: improve MDIO busy wait code 
SVN-Revision: 32586
 2012-07-03 15:24:02 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
 2012-07-03 15:24:01 +00:00
Felix Fietkau
5570b76642 ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762) 
SVN-Revision: 32520
 2012-06-28 16:05:08 +00:00
Gabor Juhos
7c87391c55 ar71xx: create profile and build image for the TL-WDR4300 board 
SVN-Revision: 32461
 2012-06-19 11:51:20 +00:00
Gabor Juhos
2d97a52045 ar71xx: add user space support for the TL-WDR4300 
SVN-Revision: 32460
 2012-06-19 11:51:18 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board 
SVN-Revision: 32459
 2012-06-19 11:51:17 +00:00
Gabor Juhos
e6a10d5cdd ar71xx: refresh patches 
SVN-Revision: 32458
 2012-06-19 11:51:15 +00:00
Gabor Juhos
86c6543259 ar71xx: make AR8327 LEDs working on the DB120 board 
SVN-Revision: 32457
 2012-06-19 10:44:17 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
SVN-Revision: 32455
 2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Gabor Juhos
27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC 
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
 2012-06-19 10:13:38 +00:00
Gabor Juhos
ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC 
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
 2012-06-19 10:13:37 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x 
SVN-Revision: 32446
 2012-06-19 00:21:58 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Felix Fietkau
624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
SVN-Revision: 32095
 2012-06-06 19:37:49 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
SVN-Revision: 32090
 2012-06-06 17:24:01 +00:00