KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
18737 commits 3 branches 0 tags 154 MiB
Commit graph

646 commits

Author SHA1 Message Date
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Jonas Gorski
c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Felix Fietkau
1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Felix Fietkau
4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau
d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau
500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Felix Fietkau
9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Felix Fietkau
9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Felix Fietkau
c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau
ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau
005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau
e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau
255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos
6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver 
SVN-Revision: 27222
 2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X 
SVN-Revision: 27221
 2011-06-19 13:17:50 +00:00
Gabor Juhos
b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver 
SVN-Revision: 27166
 2011-06-13 08:12:40 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code 
SVN-Revision: 27165
 2011-06-13 08:12:38 +00:00
Gabor Juhos
13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
 2011-06-04 12:30:10 +00:00
Gabor Juhos
ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards 
SVN-Revision: 27101
 2011-06-04 12:30:09 +00:00
Felix Fietkau
31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos
750af1522b ar71xx: init external_reset for AR933X 
SVN-Revision: 27083
 2011-06-01 13:12:30 +00:00
Gabor Juhos
af4cae4498 ar71xx: add external_reset field to ath9k_platform_data 
SVN-Revision: 27082
 2011-06-01 13:12:28 +00:00