KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
27945 commits 3 branches 0 tags 154 MiB
Commit graph

422 commits

Author SHA1 Message Date
John Crispin
e36568e74b lntiq: add support for Astoria ARV7519RW. 
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
 2014-03-30 10:02:30 +00:00
John Crispin
42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22) 
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
 2014-03-30 09:16:52 +00:00
John Crispin
5a6268c078 lantiq: add esi 
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
 2014-03-30 09:16:43 +00:00
John Crispin
8b0507c9ca lantiq: fix mtd_split for brnboot firmware images 
The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324
 2014-03-30 09:16:35 +00:00
John Crispin
0c73e85cd0 lantiq: fixup ath5k support 
http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40323
 2014-03-30 09:16:31 +00:00
John Crispin
112059073e lantiq: fix initial VLAN conf for P2601HNFX 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
 2014-03-30 09:16:23 +00:00
John Crispin
5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons 
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
 2014-03-30 09:16:19 +00:00
John Crispin
e733242a23 lantiq: add support for Arcadyan ARV7519PW 
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
 2014-03-30 09:16:15 +00:00
John Crispin
3a43738e21 lantiq: reset gphys on reboot 
If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40318
 2014-03-30 09:16:10 +00:00
John Crispin
9531390aad lantiq: add support for ZyXEL P2812HNUFX 
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
 2014-03-30 09:16:06 +00:00
John Crispin
9b78e13aa3 lantiq: add ubifs support in image Makefile 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40316
 2014-03-30 09:16:02 +00:00
John Crispin
2803e79be6 lantiq: add ubifs to FEATURES 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40315
 2014-03-30 09:15:58 +00:00
John Crispin
07eb49b7e0 lantiq: xrx200: add ubi support in the kernel 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
 2014-03-30 09:15:54 +00:00
John Crispin
82da5ca248 lantiq: add inital support for xrx200 switch 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40313
 2014-03-30 09:15:50 +00:00
John Crispin
32e2246270 lantiq: xrx200: fix duplex 
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40312
 2014-03-30 09:15:46 +00:00
John Crispin
93e5c8cefc lantiq: fixup 3370 dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
 2014-03-30 09:15:41 +00:00
John Crispin
561a7ef93b lantiq: fix nand/ebu locking 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40310
 2014-03-30 09:15:37 +00:00
John Crispin
d6a138141c lantiq: add tffs driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40309
 2014-03-30 09:15:33 +00:00
John Crispin
defdec0f3a lantiq: drop old svip folders 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40294
 2014-03-27 13:34:56 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Luka Perkov
6e0fd6d518 lantiq: fix typo in pinctl driver 
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
 2014-02-15 22:54:34 +00:00
Luka Perkov
eddc327c7c lantiq: fix PCI problems on ARV4510PW 
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
 2014-02-15 22:54:32 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
 2014-01-26 11:30:34 +00:00
John Crispin
053d596297 lantiq: Add support for Astoria ARV7510PW22 
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
 2014-01-15 19:16:51 +00:00
Luka Perkov
26dcf1c7c9 lantiq: update kernel configuration 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
 2014-01-15 14:11:36 +00:00
John Crispin
f58b424c9e lantiq: improve Arcadyan ARV4510PW support 
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
 2014-01-12 12:07:07 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
 2014-01-11 16:06:37 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
 2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
 2013-12-01 09:59:53 +00:00
John Crispin
776c6c50ce lantiq: move patch to proper folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38884
 2013-11-20 17:53:36 +00:00
John Crispin
d823c20f05 lantiq: update default mii modes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
 2013-11-20 16:56:58 +00:00
John Crispin
06ada4b10f lantiq: fix an endless loop in the vmmc platform code 
this was caused by not honoured error return codes of of_gpio_count()

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38878
 2013-11-20 16:56:32 +00:00
John Crispin
000cefd85e lantiq: DGN3500 fixups 
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
 2013-11-11 13:15:08 +00:00
John Crispin
5139b2d996 lantiq: rename TDW8970 led adsl->dsl 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38730
 2013-11-11 12:19:26 +00:00
John Crispin
dabdc6911a lantiq: update TDW8970.dts to support buttons properly 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38728
 2013-11-11 12:19:18 +00:00
John Crispin
30fafd0617 lantiq: remove old hotplug handler 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38727
 2013-11-11 12:19:15 +00:00
John Crispin
7ee1546ca3 lantiq: fix TDW8970 lan/wan mac 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38677
 2013-11-07 12:46:24 +00:00
John Crispin
f198adc030 lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devices 
The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.

Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38673
 2013-11-07 12:46:08 +00:00
John Crispin
1a368e8616 lantiq: fix td-w8970 initramfs generation 
https://dev.openwrt.org/ticket/14417

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38667
 2013-11-07 12:45:44 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
 2013-11-05 08:25:45 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
 2013-10-23 12:51:05 +00:00
Hauke Mehrtens
81e2f00367 kernel: update kernel to 3.10.15 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
 2013-10-13 19:28:29 +00:00
John Crispin
654dfb1784 lantiq: fix up diag.sh 
init no longer exists as a parameter

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38342
 2013-10-08 15:28:33 +00:00
John Crispin
715b62ebad lantiq: experia v8 fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
 2013-10-07 15:03:00 +00:00
John Crispin
81fb43d2f1 lantiq: fix fritz3370 dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
 2013-10-07 15:02:56 +00:00
John Crispin
ae225124c6 lantiq: fix fritz image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38326
 2013-10-07 15:02:52 +00:00
John Crispin
1398a5d849 lantiq: fix eva partition split for squashfs 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38325
 2013-10-07 15:02:48 +00:00
John Crispin
4f3797386f lantiq: add support for VGV7519 KPN Experia box v8 
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
 2013-09-30 20:48:46 +00:00
Felix Fietkau
bff3637d24 lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38243
 2013-09-27 21:12:08 +00:00
Gabor Juhos
9c8a5ef115 kernel: update 3.10 to 3.10.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
 2013-09-27 07:19:21 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
 2013-09-26 17:53:14 +00:00
Gabor Juhos
0380904acb kernel/3.10: refresh all target patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
 2013-09-25 17:13:24 +00:00
Gabor Juhos
482b5f34e5 lantiq/3.10: unbreak the mtd-split patch 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
 2013-09-25 16:22:04 +00:00
Luka Perkov
7665c57a72 lantiq: fix usb on sx76x 
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38083
 2013-09-20 14:24:30 +00:00
Luka Perkov
d2ad87885d lantiq: style fixes 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38051
 2013-09-19 00:50:49 +00:00
Luka Perkov
43f1a47430 lantiq: add initial support for Siemens GIGASX76X 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
 2013-09-19 00:50:48 +00:00
Luka Perkov
3b33adeb99 lantiq: add support for ZyXEL P2601HNFX 
SVN-Revision: 38049
 2013-09-19 00:50:46 +00:00
Luka Perkov
7d2c5682b9 lantiq: add support for ZTE H201L 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
 2013-09-19 00:50:44 +00:00
John Crispin
40ac8dd9df lantiq: fix FRITZ7320 flash window size 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38042
 2013-09-18 16:31:45 +00:00
John Crispin
f9f73ef2ec lantiq: fix ath9k eeprom loading order bug 
https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38041
 2013-09-18 16:31:41 +00:00
John Crispin
8ff756cdc9 lantiq: fix up default firmware selection for spanish and italian routers 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38039
 2013-09-18 16:31:32 +00:00
John Crispin
1878a3d6ab lantiq: add v3.10 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
 2013-09-17 21:46:10 +00:00
John Crispin
cd668944ef lantiq: add wifi eep to a803 dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
 2013-09-17 21:46:04 +00:00
John Crispin
18b76c66fb lantiq: add a subtarget for the xrx200 SoC family 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
 2013-09-17 21:46:00 +00:00
John Crispin
0782501483 lantiq: update dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
 2013-09-17 21:45:50 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split 
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
 2013-09-15 17:03:29 +00:00
John Crispin
94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
 2013-08-06 16:25:45 +00:00
John Crispin
d13cbb04ad lantiq: add support for tplink images to .../image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
 2013-08-06 12:31:25 +00:00
John Crispin
5001afdc37 lantiq: make the split patch recognize the tplink header 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
 2013-08-06 12:31:20 +00:00
John Crispin
7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
 2013-08-06 12:31:16 +00:00
John Crispin
e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
 2013-08-06 12:31:10 +00:00
Luka Perkov
27fa640548 lantiq: add (incomplete) support for Aztech GR7000 
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
 2013-08-06 10:17:16 +00:00
John Crispin
288adb6634 lantiq: several a803 related fixes 
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
 2013-08-05 10:42:00 +00:00
John Crispin
b4c722267e lantiq: fix VG3503J ethernet/gphy led support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
 2013-08-01 14:30:40 +00:00
John Crispin
336c94c32d lantiq: setup gphy leds on TPlink TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
 2013-07-29 13:10:42 +00:00
John Crispin
c3b5ee96b9 lantiq: add gphy pinmux definitions 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
 2013-07-29 13:10:37 +00:00
John Crispin
61e6be686f lantiq: set sane default for phy leds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
 2013-07-29 13:10:32 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
John Crispin
bfe65eaf7a lantiq: remove stale phy register setup properties from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
 2013-07-25 20:54:51 +00:00
John Crispin
54b4074074 lantiq: add TP-Link TDW8970 image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
 2013-07-25 20:29:24 +00:00
John Crispin
a2c5540727 lantiq: add profile for TP-Link TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
 2013-07-25 20:29:20 +00:00
John Crispin
a99042c6a4 lantiq: add devicetree for TP-Link TDW8970 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
 2013-07-25 20:29:15 +00:00
John Crispin
313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
 2013-07-25 20:29:10 +00:00
John Crispin
a4d31c0353 lantiq: make macs loadable from mtd partitions 
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
 2013-07-25 20:29:05 +00:00
John Crispin
32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
 2013-07-25 20:29:01 +00:00
John Crispin
4036be4408 lantiq: update pcie driver 
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
 2013-07-25 20:28:56 +00:00
Gabor Juhos
6a5b4ec7dc kernel: update 3.9 to 3.9.11 
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
 2013-07-22 15:30:56 +00:00
Felix Fietkau
fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
 2013-07-15 11:06:07 +00:00
John Crispin
955662ec47 lantiq: apply [37258] also to the 3.9 kernel patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37317
 2013-07-14 18:28:02 +00:00
John Crispin
93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices 
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
 2013-07-11 21:16:34 +00:00
Luka Perkov
9de461f202 lantiq: etop enable gbit port0 
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37191
 2013-07-08 07:11:59 +00:00
Luka Perkov
1a3ad5a037 lantiq: add device tree support for arv4519pw 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
 2013-07-05 07:44:42 +00:00
Luka Perkov
14b6674b39 lantiq: fix initramfs 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37143
 2013-07-03 09:17:15 +00:00
John Crispin
fdfbac75c2 lantiq: xrx200_net compile fix 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37126
 2013-07-02 09:34:45 +00:00
Jonas Gorski
0d9f760f27 kernel: update linux 3.9 to 3.9.8 
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
 2013-06-30 13:10:12 +00:00
John Crispin
124ef95f5f lantiq: add v3.9 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37089
 2013-06-29 18:16:56 +00:00
John Crispin
bfc7007226 lantiq: Add support for loading athxk eeproms through mtd 
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
 2013-06-29 16:33:46 +00:00
John Crispin
fe8ecbd972 lantiq: fix kernel config for DEU support 
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37086
 2013-06-29 16:33:37 +00:00
John Crispin
b4f36358ff lantiq: make xrx200 network driver use a tasklet for rx housekeeping 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37085
 2013-06-29 16:33:28 +00:00