lantiq: fix fritz3370 dts file

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
This commit is contained in:
John Crispin 2013-10-07 15:02:56 +00:00
parent ae225124c6
commit 81fb43d2f1

View file

@ -23,13 +23,8 @@
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000 0x400000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x3000000>;
label = "firmware";
reg = <0x00000 0x3400000>;
};
partition@3400000 {
@ -51,53 +46,6 @@
};
};
spi@E100800 {
compatible = "lantiq,spi-xway-broken";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
#address-cells = <1>;
#size-cells = <1>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25fl129p0";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l3205d";
spi-max-frequency = <1000000>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@ -105,7 +53,7 @@
state_default: pinmux {
spi {
lantiq,groups = "spi", "spi_cs4";
lantiq,function = "spi";
lantiq,function = "gpio";
};
nand_out {
lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
@ -216,6 +164,53 @@
};
};
spi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-gpio";
gpio-miso = <&gpio 16 0>;
gpio-mosi = <&gpio 17 0>;
gpio-sck = <&gpio 18 0>;
num-chipselects = <1>;
cs-gpios = <&gpio 10 1>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l2005a";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l2005a";
spi-max-frequency = <1000000>;
ath9k_cal: partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "tffs (1)";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "tffs (2)";
read-only;
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom-mtd";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,eep-endian;
ath,eep-swap;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";