Commit graph

171 commits

Author SHA1 Message Date
Gabor Juhos
6e7b802297 ramips: merge 2.6.39 patches
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
Gabor Juhos
3334d0604e ramips: specify eeprom file name on RT305X
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
Gabor Juhos
f53cc4c439 ramips: specify eeprom file name on RT288X
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
Gabor Juhos
575a5286c8 ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
Gabor Juhos
f1cf43d468 ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
Gabor Juhos
641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
Gabor Juhos
16ad91d69f ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
Gabor Juhos
affb57ee27 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
Gabor Juhos
3099ffe414 ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
Gabor Juhos
1844ea6c7b ramips: UPF_FIXED_TYPE must be set for the serial ports
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
Gabor Juhos
9ef4785364 ramips: define GPIO chips separately for each SoCs
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
Gabor Juhos
37d6d88869 ramips: move GPIO definitions into a separate header file
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
Gabor Juhos
251a367fb4 ramips: setup GPIO chip functions on the fly
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
Gabor Juhos
b03f2dfcee ramips: use separate register base for GPIO chips
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
Gabor Juhos
8770359f17 ramips: fix dir-300 mtd layout
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
Gabor Juhos
f599459abb ramips: enable MDIO on the HW550-3G board
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
Gabor Juhos
d701a72760 ramips: add sysupgrade and status LED support for HW550-3G
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
Gabor Juhos
23518bb2e4 ramips: initial board support for Aztech HW550-3G
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
Gabor Juhos
1c92e047c8 ramips: register watchdog device on the rt288x boards
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
Gabor Juhos
2b50cecea6 ramips: add watchdog device for RT288x
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
Gabor Juhos
764aa3fe9c ramips: register watchdog device on the rt305x boards
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
Gabor Juhos
42e36cf732 ramips: add watchdog device for RT305x
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
Gabor Juhos
f38367fcb4 ramips: implement clock API for RT288x
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
Gabor Juhos
b0ffa70248 ramips: implement clock API for RT305X
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
Gabor Juhos
f9e74383a9 ramips: remove extern and __init from function prototypes
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
Gabor Juhos
f9898e30fb ramips: handle OTG interrupt on the RT305x SoC
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
Gabor Juhos
3b9a6adc7d ramips: ramips_esw: convert it to be a platform driver
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
Gabor Juhos
47dd3b9fea ramips: use tabs instead of spaces in mach-f5d8235-v2.c
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
Gabor Juhos
21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
Gabor Juhos
2e45ce264d ramips: register ethernet device on the RT-N15
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
Gabor Juhos
c2ebadc504 ramips: add generic ethernet device for the RT288x
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
Gabor Juhos
0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
Gabor Juhos
27375c5139 ramips: protect GPIO register access with a spinlock
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
John Crispin
971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
Gabor Juhos
c24397b385 ramips: merge slab patch
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
Gabor Juhos
7ac21ada55 ramips: use COMMAND_LINE_SIZE directly
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
Gabor Juhos
60cbdbb686 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
Gabor Juhos
a423c3abee ramips: annotate device register function prototypes with __init
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
Gabor Juhos
a9f313edea ramips: register wifi device for the RT2880 based boards
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
Gabor Juhos
9f3d673dbc ramips: add wifi device for the RT2880 as well
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
Gabor Juhos
1c25cfcde0 ramips: register wifi device on the rt305x based boards
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
John Crispin
6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
John Crispin
3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 20596
2010-03-30 10:06:05 +00:00
Gabor Juhos
72b08b729a ramips_eth: pass sys_clk via platform_data
SVN-Revision: 19462
2010-01-31 17:56:30 +00:00
Gabor Juhos
a4e85bbceb ramips: register gpio buttons on the Fonera 2.0N board
SVN-Revision: 19413
2010-01-30 15:25:52 +00:00
Gabor Juhos
8823482a02 ramips: register gpio buttons on the WHR-G300N board
SVN-Revision: 19412
2010-01-30 15:25:49 +00:00
Gabor Juhos
35f47a3654 ramips: register gpio buttons on the V22RW-2x2 board
SVN-Revision: 19411
2010-01-30 15:25:47 +00:00
Gabor Juhos
30a397fd5e ramips: register gpio buttons on the DIR-300 revB board
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
Gabor Juhos
f9b053e87f ramips: fix wrong base addresses for the RT288x
SVN-Revision: 19409
2010-01-30 15:25:41 +00:00
Gabor Juhos
8448caa6ad ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
SVN-Revision: 19408
2010-01-30 15:25:36 +00:00
Gabor Juhos
94c9590e91 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
SVN-Revision: 19407
2010-01-30 15:25:33 +00:00
Gabor Juhos
55185915de ramips: cleanup WZR-AGL300NH board support file
SVN-Revision: 19406
2010-01-30 15:25:29 +00:00
Gabor Juhos
0530dd9849 ramips: register gpio-buttons on the RT-N15 board
SVN-Revision: 19405
2010-01-30 15:25:25 +00:00
Gabor Juhos
9327f02b7b ramips: add common gpio-buttons device
SVN-Revision: 19404
2010-01-30 15:25:20 +00:00
Gabor Juhos
4af1f533bb ramips: register rtl8366s device on the RT-N15 board
SVN-Revision: 19403
2010-01-30 15:25:16 +00:00
Gabor Juhos
e2dde81ead ramips: sanitize return value of ramips_gpio_get
SVN-Revision: 19401
2010-01-30 15:25:08 +00:00
Gabor Juhos
af9f40e60d ramips: update mips multi-machine stuff
SVN-Revision: 19400
2010-01-30 15:25:03 +00:00
Jo-Philipp Wich
6351d88e29 add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
SVN-Revision: 19321
2010-01-24 23:31:49 +00:00
Gabor Juhos
b624dec41b ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
SVN-Revision: 18229
2009-10-30 15:15:41 +00:00
Gabor Juhos
bc59e3da51 ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
SVN-Revision: 18176
2009-10-26 17:17:51 +00:00
Gabor Juhos
5dd653a6bd ramips: use definitions from rt305x_regs, and nuke the duplicated ones
SVN-Revision: 18175
2009-10-26 17:17:48 +00:00
Gabor Juhos
c170980c4f ramips: move ramips_eth_platform_data into a separate file
SVN-Revision: 18174
2009-10-26 17:17:45 +00:00
Gabor Juhos
69a3298ab5 ramips: use resource to pass irq and base address to the ethernet driver
SVN-Revision: 18166
2009-10-26 17:17:18 +00:00
John Crispin
f1ad6d3768 fixes licenses
SVN-Revision: 18152
2009-10-25 17:41:01 +00:00
Gabor Juhos
984fe7992a ramips: nuke net_device stats from the private data of the ethernet driver
SVN-Revision: 18147
2009-10-25 09:37:30 +00:00
Gabor Juhos
7af7711f9f ramips: register ethernet device on the DIR-300 board
SVN-Revision: 18143
2009-10-25 09:37:17 +00:00
Gabor Juhos
2ad69183a8 ramips: change prom code to accept 'board=FOOBAR' from the command line
SVN-Revision: 18142
2009-10-25 07:10:16 +00:00
Gabor Juhos
d681005ce3 ramips: modify {read,write}_config helpers
SVN-Revision: 18141
2009-10-25 07:10:14 +00:00
Gabor Juhos
ebde2e4c90 ramips: nuke config_access helper
SVN-Revision: 18140
2009-10-25 07:10:11 +00:00
John Crispin
c23f92244c fixes dma hangups in eth
SVN-Revision: 18139
2009-10-25 00:11:08 +00:00
John Crispin
eff75d868b make ethernet a platform device
SVN-Revision: 18135
2009-10-24 20:58:41 +00:00
John Crispin
5c399c6f20 missing define to make mach for fonera20n work
SVN-Revision: 18134
2009-10-24 20:57:59 +00:00
John Crispin
e4e4aa90d3 adds mach type for fonera20n
SVN-Revision: 18132
2009-10-24 20:55:36 +00:00
John Crispin
d95163658c adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet
SVN-Revision: 18128
2009-10-23 16:51:51 +00:00
Gabor Juhos
279c5dad25 ramips: add preliminary support for the DIR-300 revB board
SVN-Revision: 18058
2009-10-18 08:48:07 +00:00
Gabor Juhos
3b9cb8b673 ramips: fix return value in 'pcibios_map_irq' in the rt288x pci code
SVN-Revision: 17975
2009-10-07 11:37:12 +00:00
Gabor Juhos
13be9155c5 ramips: remove obsolete 'pcibios_fixups' from the rt288x pci code
SVN-Revision: 17974
2009-10-07 11:37:10 +00:00
Gabor Juhos
f2470f7590 ramips: add rt2880_pci_get_cfgaddr helper
SVN-Revision: 17973
2009-10-07 11:37:07 +00:00
Gabor Juhos
fe360a232b ramips: use switch statement instead of multiple if-else-if in the rt288x pci code
SVN-Revision: 17972
2009-10-07 11:37:03 +00:00
Gabor Juhos
37f5a64938 ramips: protect rt288x pci config accesses with a spinlock
SVN-Revision: 17971
2009-10-07 11:37:00 +00:00
Gabor Juhos
84e2f22465 ramips: make rt2880_pci_base static
SVN-Revision: 17970
2009-10-07 11:36:57 +00:00
Gabor Juhos
ca82f13970 ramips: define some magic values in the rt288x pci code
SVN-Revision: 17969
2009-10-07 11:36:53 +00:00
Gabor Juhos
6a54d033fc ramips: add copyright header to the rt288x pci code
SVN-Revision: 17968
2009-10-07 11:36:49 +00:00
Gabor Juhos
7f3d685eec ramips: make {read,write}_config static
SVN-Revision: 17920
2009-10-05 18:44:24 +00:00
Gabor Juhos
2739177201 ramips: convert 'config_access' function to void
SVN-Revision: 17919
2009-10-05 18:44:22 +00:00
Gabor Juhos
5b07caf121 ramips: add register access functions into the rt288x pci code
SVN-Revision: 17918
2009-10-05 18:44:19 +00:00
Gabor Juhos
0f51ed2723 ramips: fix RT2880_PCI_BASE definition
SVN-Revision: 17917
2009-10-05 18:44:16 +00:00
Gabor Juhos
5a37945317 ramips: rt288x pci code cleanup
SVN-Revision: 17916
2009-10-05 18:44:13 +00:00
Gabor Juhos
0e0e945e33 ramips: cleanup coding-style of the rt288x pci code
SVN-Revision: 17915
2009-10-05 18:44:10 +00:00
Gabor Juhos
6ceea98b0a ramips: merge ops-rt288x.c and rt288x_pci.h into pci-rt288x.c
SVN-Revision: 17914
2009-10-05 18:44:06 +00:00
Gabor Juhos
c8489ba3f8 ramips: remove unneccesary ifdefs from the rt288x pci code
SVN-Revision: 17862
2009-10-05 09:06:16 +00:00
Gabor Juhos
e555522b95 ramips: remove unneccesary includes from the rt288x pci code
SVN-Revision: 17861
2009-10-05 09:06:13 +00:00
Gabor Juhos
f992f34277 ramips: add Kbuild patch for the rt288x pci code, and fix invalid header file paths
SVN-Revision: 17860
2009-10-05 09:06:10 +00:00
John Crispin
a70ef0c337 adds pci support for rt288x
SVN-Revision: 17855
2009-10-04 19:53:17 +00:00
Gabor Juhos
28250aaa31 add missing GPIO register offsets
SVN-Revision: 17513
2009-09-04 15:08:29 +00:00
Gabor Juhos
8d8a4e7274 add GPIO configuration feature
SVN-Revision: 17512
2009-09-04 15:08:26 +00:00
Gabor Juhos
b5e6d76dea fix a typo
SVN-Revision: 17474
2009-09-02 15:31:03 +00:00