ramips: add watchdog device for RT288x

SVN-Revision: 25129
This commit is contained in:
Gabor Juhos 2011-01-26 20:48:50 +00:00
parent 764aa3fe9c
commit 2b50cecea6
3 changed files with 33 additions and 0 deletions

View file

@ -33,6 +33,7 @@
#define RT2880_SDRAM_BASE 0x08000000
#define RT2880_SYSC_SIZE 0x100
#define RT2880_TIMER_SIZE 0x100
#define RT2880_INTC_SIZE 0x100
#define RT2880_MEMC_SIZE 0x100
#define RT2880_UART0_SIZE 0x100
@ -45,6 +46,7 @@
#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */
#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */
#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */
#define SYSC_REG_CLKCFG 0x030
#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/
#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/
#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */
@ -62,6 +64,8 @@
#define SYSTEM_CONFIG_CPUCLK_280 0x2
#define SYSTEM_CONFIG_CPUCLK_300 0x3
#define CLKCFG_SRAM_CS_N_WDT BIT(9)
#define RT2880_RESET_SYSTEM BIT(0)
#define RT2880_RESET_TIMER BIT(1)
#define RT2880_RESET_INTC BIT(2)

View file

@ -171,3 +171,30 @@ void __init rt288x_register_ethernet(void)
platform_device_register(&rt288x_eth_device);
}
static struct resource rt288x_wdt_resources[] = {
{
.start = RT2880_TIMER_BASE,
.end = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rt288x_wdt_device = {
.name = "ramips-wdt",
.id = -1,
.resource = rt288x_wdt_resources,
.num_resources = ARRAY_SIZE(rt288x_wdt_resources),
};
void __init rt288x_register_wdt(void)
{
u32 t;
/* enable WDT reset output on pin SRAM_CS_N */
t = rt288x_sysc_rr(SYSC_REG_CLKCFG);
t |= CLKCFG_SRAM_CS_N_WDT;
rt288x_sysc_wr(t, SYSC_REG_CLKCFG);
platform_device_register(&rt288x_wdt_device);
}

View file

@ -20,4 +20,6 @@ void rt288x_register_wifi(void);
extern struct ramips_eth_platform_data rt288x_eth_data;
void rt288x_register_ethernet(void);
void rt288x_register_wdt(void);
#endif /* __ASM_MACH_RT288X_PLATFORM_H */