KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
29923 commits 3 branches 0 tags 154 MiB
Commit graph

13139 commits

Author SHA1 Message Date
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems 
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
 2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again 
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
 2014-12-18 16:23:42 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
 2014-12-18 11:57:42 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc 
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
 2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii 
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
 2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv 
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
 2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops 
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
 2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch 
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
 2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register 
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
 2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
 2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
 2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives 
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
 2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
 2014-12-17 08:27:38 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
 2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
 2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
 2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
 2014-12-15 09:59:44 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
 2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
 2014-12-15 08:51:14 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
 2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
 2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
 2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
 2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
 2014-12-14 00:35:03 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch 
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
 2014-12-13 20:06:47 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
 2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
 2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
 2014-12-13 11:55:41 +00:00
Felix Fietkau
0f25db1a7d rb532: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43689
 2014-12-13 11:55:32 +00:00
Felix Fietkau
d34e2a337c at91: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
 2014-12-13 11:55:24 +00:00
Felix Fietkau
45380ebd1a brcm2708: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43687
 2014-12-13 11:55:11 +00:00
Felix Fietkau
170ce29617 ixp4xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43686
 2014-12-13 11:55:04 +00:00
Felix Fietkau
c7e8b5ebbd lantiq: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
 2014-12-13 11:54:57 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
 2014-12-13 11:54:49 +00:00
Florian Fainelli
8692819c2c netlogic: fix XLR network driver build 
Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43682
 2014-12-13 08:08:30 +00:00
John Crispin
263070a2e7 ramips:Add support for Aigale Ai-BR100 
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 43681
 2014-12-13 08:07:03 +00:00
John Crispin
aa697f1313 mxs: indention and whitespace fixes 
Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43680
 2014-12-13 08:06:22 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs 
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
 2014-12-13 08:06:01 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20 
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
 2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver 
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
 2014-12-13 08:02:52 +00:00
John Crispin
4a7c88f139 kernel/generic: remove some left-over garbage from ledtrig patch 
cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43676
 2014-12-13 08:00:22 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
 2014-12-12 20:24:33 +00:00
John Crispin
ee6b5c6007 kernel/generic: add ledtrig support to libata 
SVN-Revision: 43674
 2014-12-12 20:24:21 +00:00
John Crispin
1701a9a4b9 oxnas: clean up default package selection 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43673
 2014-12-12 20:24:13 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
 2014-12-12 17:14:14 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236 
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
 2014-12-12 16:23:29 +00:00
John Crispin
6c4e7b22eb ralink: fix lenovo y1 wan port mapping 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43667
 2014-12-12 16:17:31 +00:00
John Crispin
7068b7ed1c oxnas: build S-ATA driver as a module 
From: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43665
 2014-12-12 16:17:13 +00:00
John Crispin
b1f7a027da ralink: make uartf functional on AWM002 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43664
 2014-12-12 16:17:03 +00:00
John Crispin
58a4113c5e oxnas: use u-boot.bin in KDIR 
This fixes building *u-boot-initramfs.bin images using ImageBuilder

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43663
 2014-12-12 16:16:57 +00:00
Zoltan Herpai
8feb491156 sunxi: fix led on bananapi 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43661
 2014-12-12 16:11:17 +00:00
Zoltan Herpai
92cf73cf11 mxs: allow bootloader to pass kernel cmdline 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43657
 2014-12-12 13:37:21 +00:00
Zoltan Herpai
a1467fb73b mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding 
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43656
 2014-12-12 13:18:29 +00:00
Zoltan Herpai
f34dfaf249 mxs: add i2c and spi packages to profiles 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43651
 2014-12-12 12:14:40 +00:00
Zoltan Herpai
50f9d27da8 mxs: fix automatic status led detection 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43650
 2014-12-12 12:01:39 +00:00
Zoltan Herpai
1014bb0fb4 mxs: update dts file for Duckbill 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43649
 2014-12-12 11:43:56 +00:00
Zoltan Herpai
2265c4db31 mxs: i2c changes - add package for i2c module - remove i2c debug 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43648
 2014-12-12 11:39:22 +00:00
Zoltan Herpai
fc2dff246d mxs: add kernel module for spi interface 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43647
 2014-12-12 11:10:04 +00:00
Zoltan Herpai
276a732a77 mxs: make boardname consistent with other targets 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43646
 2014-12-12 11:03:55 +00:00
Luka Perkov
a3eed6bc35 kernel: refresh patches 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43643
 2014-12-11 23:29:07 +00:00
Luka Perkov
a2a6077fd0 kirkwood: sort 110-nas profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43642
 2014-12-11 23:29:04 +00:00
John Crispin
21349229f7 au1000: revert 43626 due to syntax errors 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43641
 2014-12-11 22:27:56 +00:00
John Crispin
ad35bcc41e oxnas: use ARM BCJ filter for XZ decompression 
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.

in include/image.mk:    BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43640
 2014-12-11 20:41:51 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
 2014-12-11 20:31:07 +00:00
Felix Fietkau
bb4ffcf928 xburst: fix subtarget config file names 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43637
 2014-12-11 20:07:52 +00:00
Felix Fietkau
4b80e52575 x86: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43636
 2014-12-11 20:07:45 +00:00
Felix Fietkau
3cc3c0a518 octeon: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43635
 2014-12-11 20:07:39 +00:00
Felix Fietkau
c095c7c202 adm8668: remove linux 3.3 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43634
 2014-12-11 20:07:31 +00:00
Jonas Gorski
b7b52ce7de ar7: remove config-3.10 
Remove a leftover file from the 3.10 support removal.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43632
 2014-12-11 19:35:43 +00:00
John Crispin
6f4656c19b netlogic: sync kernel config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43630
 2014-12-11 18:58:12 +00:00
John Crispin
1ef2106725 ralink: mt7621 was missing a symbol that made the CC builder fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43629
 2014-12-11 18:54:30 +00:00
John Crispin
ce06a742c9 mcp85xx/p1020: fixup config-default 
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
 2014-12-11 18:39:22 +00:00
John Crispin
6d52fd203d kernel/modules: fix chipidea 
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
 2014-12-11 18:35:41 +00:00
John Crispin
ed61e202a1 au1000: distinguish different models and set correct MAC-address 
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
 2014-12-11 18:28:44 +00:00
Felix Fietkau
1558a6bcbf mpc85xx: fix another typo in the image makefile 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43625
 2014-12-11 18:18:16 +00:00
Felix Fietkau
5c89c4a5de mpc85xx: add missing devicetree ranges property for ethernet devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43624
 2014-12-11 18:18:10 +00:00
Felix Fietkau
4db5bc59b1 mpc85xx: fix typo in image name 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43622
 2014-12-11 17:52:12 +00:00
Felix Fietkau
2d9d3e7163 mpc85xx: fix initramfs images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43620
 2014-12-11 15:29:39 +00:00
Rafał Miłecki
b55199cf41 bcm53xx: support LEDs on Buffalo devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
 2014-12-11 11:23:26 +00:00
Luka Perkov
9a74026206 kirkwood: add 3.18 support 
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43613
 2014-12-11 01:20:41 +00:00
Rafał Miłecki
40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
 2014-12-10 21:50:57 +00:00
Rafał Miłecki
ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM 
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
 2014-12-10 21:24:11 +00:00
Rafał Miłecki
b0b43e1ef9 bcm53xx: use static NVRAM pointer for now 
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
 2014-12-10 19:56:56 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18 
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
 2014-12-10 18:55:53 +00:00
Rafał Miłecki
960130e99c bcm53xx: clean up nvram header 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
 2014-12-10 18:29:26 +00:00
Luka Perkov
fa5f896cb7 kernel: add missing config symbols for 3.18 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43605
 2014-12-10 18:13:34 +00:00
Rafał Miłecki
7093580424 bcm53xx: move SPROM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
 2014-12-10 18:07:01 +00:00
Rafał Miłecki
27a91a99d9 bcm53xx: move NVRAM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
 2014-12-10 18:01:24 +00:00
Rafał Miłecki
3fab0d818c bcm53xx: move NVRAM header to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
 2014-12-10 17:37:24 +00:00
John Crispin
9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver 
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
 2014-12-10 15:51:07 +00:00
John Crispin
1fa7c8587d oxnas: add copyright header to sata_oxnas 
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43597
 2014-12-10 15:51:00 +00:00
Luka Perkov
fd492354bb kernel: refresh patches 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43591
 2014-12-09 23:29:52 +00:00
Luka Perkov
3b17625394 kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43590
 2014-12-09 23:29:49 +00:00
Felix Fietkau
8c6f1412b1 ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43588
 2014-12-09 12:28:46 +00:00
Felix Fietkau
27f36718d3 kernel: add a patch to make netfilter conntrack cache routing information 
Significantly improves routing / NAT performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43587
 2014-12-09 11:01:49 +00:00
Felix Fietkau
db04bbd2ec ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43586
 2014-12-09 09:38:33 +00:00
Rafał Miłecki
613bc3ef3f bcm53xx: bcm_nand: fix compilation 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43584
 2014-12-08 18:28:54 +00:00
Rafał Miłecki
aed6b26431 bcm53xx: bcm_nand: switch from cmdlinepart to ofpart 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43580
 2014-12-08 17:39:07 +00:00
Rafał Miłecki
73237c0c9b brcm47xx: add WNDR3400 V3 buttons 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43579
 2014-12-08 17:02:28 +00:00
Jonas Gorski
bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers 
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
 2014-12-08 16:11:52 +00:00
Jonas Gorski
ed7d8a0450 brcm63xx: alphabetically order image generation 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43577
 2014-12-08 16:11:32 +00:00
Jonas Gorski
bc4dd8e119 brcm63xx: refresh patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43576
 2014-12-08 16:11:26 +00:00
Jonas Gorski
3fa17f6d58 brcm63xx: add DT support for USR9108 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43575
 2014-12-08 16:11:08 +00:00
Jonas Gorski
218582e8ea brcm63xx: add DT support for F5D7633 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43574
 2014-12-08 16:11:03 +00:00
Jonas Gorski
d5f1dd9079 brcm63xx: add DT support for DG834GT/PN 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43573
 2014-12-08 16:10:54 +00:00
Jonas Gorski
b0ae41f849 brcm63xx: add DT support for TD-W8900GB 
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
 2014-12-08 16:10:46 +00:00
Jonas Gorski
84200cf189 brcm63xx: add DT support for DSL-2640B 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43571
 2014-12-08 16:10:41 +00:00
Jonas Gorski
929ade0648 brcm63xx: add DT support for CPVA642 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43570
 2014-12-08 16:10:17 +00:00
Felix Fietkau
712f6ec52a kernel: update linux 3.18 to final release 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43569
 2014-12-08 13:16:35 +00:00
Felix Fietkau
58de4a4759 kernel: backport an upstream xfrm crash fix 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43568
 2014-12-08 12:50:37 +00:00
Felix Fietkau
0cebaafa6e kernel: add missing check for skb->dev on netfilter xfrm optimization patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43567
 2014-12-08 12:21:17 +00:00
Felix Fietkau
14a163ca58 kernel: remove the obsolete vm_exports patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43565
 2014-12-08 12:04:34 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
 2014-12-08 12:04:25 +00:00
Felix Fietkau
6327386aff ar71xx: fix invalid pointer accesses caused by unaligned access hacks (#18455) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43560
 2014-12-08 10:48:28 +00:00
Felix Fietkau
0f07e7c9a8 x86: update to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43559
 2014-12-08 10:04:50 +00:00
Felix Fietkau
363b166eb9 x86: rename */config-3.10 to */config-default 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43558
 2014-12-08 10:04:45 +00:00
Felix Fietkau
0485747912 kernel: fix x86 objdump invocation on 3.14 and 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43557
 2014-12-08 10:04:39 +00:00
John Crispin
7c7964e10d ar7: bump to 3.14 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43553
 2014-12-08 06:15:03 +00:00
Florian Fainelli
aba92ec05e adm8668: switch to 3.14 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43552
 2014-12-07 21:59:36 +00:00
Florian Fainelli
06152c8abf adm8668: add 3.14 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43551
 2014-12-07 21:59:25 +00:00
Florian Fainelli
356447e6c2 adm8668: rename files to files-3.3 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43550
 2014-12-07 21:58:49 +00:00
Florian Fainelli
bb9833a17a cobalt: remove 3.3 and 3.10 kernel configuration files 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43549
 2014-12-07 21:58:33 +00:00
Florian Fainelli
4287370f76 cobalt: switch to 3.14 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43548
 2014-12-07 21:58:22 +00:00
Florian Fainelli
35e8cc2cdc cobalt: add 3.14 kernel configuration file 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43547
 2014-12-07 21:58:12 +00:00
Hauke Mehrtens
7a2f186d70 bcm53xx: update the NAND driver 
This adds some updates to the NAND driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43546
 2014-12-07 21:55:21 +00:00
Hauke Mehrtens
664ae86dde bcm53xx: update the PCIe driver 
This adds some updates to the PCIe driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43545
 2014-12-07 21:54:53 +00:00
Hauke Mehrtens
d9bb8326fa kernel: update bcma and ssb to wireless-testing master-2014-12-05 
This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43544
 2014-12-07 21:53:20 +00:00
John Crispin
7a65768ddc kirkwood: add a diag script 
Currently only Linksys EA4500 is supported.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43543
 2014-12-07 16:53:37 +00:00
John Crispin
8a123f6f66 ramips: generate factory images for Nexx devices 
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43541
 2014-12-07 16:53:22 +00:00
John Crispin
3572657c5a ar71xx: dev-eth: replace mdelay calls 
Similar to patch 2. Replace further mdelay calls.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43540
 2014-12-07 16:53:15 +00:00
John Crispin
59e7999a44 ag71xx: replace delay with sleep calls 
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43539
 2014-12-07 16:53:09 +00:00
John Crispin
4caa8d50ad ag71xx: replace fixed PHY reset wait time in ar7240sw_setup 
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43538
 2014-12-07 16:52:58 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
 2014-12-07 16:12:44 +00:00
Hauke Mehrtens
8e738da02c brcm47xx: remove kernel 3.10 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
 2014-12-07 15:34:28 +00:00
Rafał Miłecki
dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
 2014-12-07 11:02:52 +00:00
Rafał Miłecki
a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
 2014-12-07 10:55:44 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
 2014-12-07 00:58:40 +00:00
Rafał Miłecki
9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
 2014-12-05 16:46:55 +00:00
Rafał Miłecki
d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
 2014-12-05 16:15:16 +00:00
Rafał Miłecki
8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
 2014-12-05 16:13:27 +00:00
Rafał Miłecki
8033ccc975 kernel: update bcma up to 2014-10-27 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
 2014-12-05 16:11:03 +00:00
John Crispin
c79ddb3773 octeon: sysupgrade: support config restore on ERL 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43524
 2014-12-05 08:58:25 +00:00
John Crispin
1731d5520e octeon: sysupgrade: rename old kernel after mounting /boot 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43523
 2014-12-05 08:58:18 +00:00
John Crispin
52f1d8ecdc octeon: sysupgrade: fix test for rootfs device 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43522
 2014-12-05 08:58:06 +00:00
John Crispin
dcc20e525b oxnas: switch back to kernel 3.14 
3.18 still got problems with stuck reboots if rootfs is ubifs...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43521
 2014-12-05 00:20:50 +00:00
John Crispin
e553dfc356 oxnas: re-add support for kernel 3.14 
This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.

[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43520
 2014-12-05 00:20:41 +00:00
John Crispin
dcc8a8ca9e octeon: add support for 3.18 kernel 
Runtime tested on Ubiquiti EdgeRouter Lite.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43519
 2014-12-05 00:20:10 +00:00
John Crispin
6f665ea7b8 octeon: sysupgrade: support config restore 
SVN-Revision: 43518
 2014-12-05 00:19:59 +00:00
John Crispin
28a9d9853b octeon: sysupgrade: get rootfsdev from kernel cmdline 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43517
 2014-12-05 00:19:46 +00:00
John Crispin
e6858f5f3f amazon: R.I.P. 
its been broken for 2 1/2 years

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43516
 2014-12-05 00:19:40 +00:00
John Crispin
d04c4a311e ralink: mt7621 is a 1004Kc 
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43514
 2014-12-03 20:22:42 +00:00
Felix Fietkau
426467beba kernel: add missing null pointer check for mips dma ops inline patch on 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43511
 2014-12-03 18:17:17 +00:00
John Crispin
a21c9fd655 kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43507
 2014-12-03 16:05:06 +00:00
John Crispin
a10a204aab kernel: make ubi auto-attach check for a tar file magic 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43506
 2014-12-03 14:32:38 +00:00
John Crispin
8a9979e57a gemini: update ethernet driver, register ethernet on nas4220 board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43501
 2014-12-02 18:27:54 +00:00
John Crispin
a122c1c9c9 oxnas: switch CRC32 implementation to SLICEBY8 
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43498
 2014-12-02 15:25:28 +00:00
John Crispin
9430e86b61 oxnas/kd20: add usb-storage to default package set 
KD20 got a built-in card-reader wired to the USB-3 root-hub.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43497
 2014-12-02 15:25:14 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper 
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
 2014-12-02 15:25:09 +00:00
John Crispin
ae51d64671 au1000: set 3.14 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
 2014-12-02 15:23:37 +00:00
Felix Fietkau
f11b61ae18 realview: refresh kernel patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43491
 2014-12-02 13:14:59 +00:00
John Crispin
417e67b6b1 realview: fix up the phyoffset patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43488
 2014-12-01 21:45:18 +00:00
John Crispin
b5675ad92a kirkwood: enable mvsw6171 switch driver on EA4500 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43487
 2014-12-01 21:30:40 +00:00
John Crispin
9b5f583906 kernel: add driver for Marvell 88E6171 switch 
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43486
 2014-12-01 21:30:35 +00:00
John Crispin
374f8a04e1 malta: set 3.14 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43481
 2014-12-01 18:46:29 +00:00
Felix Fietkau
d1c0a65266 kernel: update 3.18 to rc7 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43479
 2014-12-01 17:38:54 +00:00
John Crispin
ad1592e02c oxnas: change visible board name 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43475
 2014-12-01 16:15:37 +00:00
John Crispin
aa9141046f oxnas: ehci: rename vendor prefix plxtch to plxtech 
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43474
 2014-12-01 16:15:30 +00:00
John Crispin
ecd27db757 ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip 
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43471
 2014-12-01 16:15:08 +00:00
John Crispin
ae15531bd2 ar8216: factor out mii_lo_first to ar8xxx_chip 
Factor out mii_lo_first to ar8xxx_chip.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43470
 2014-12-01 16:15:02 +00:00
John Crispin
ea9324f3d3 ar8216: factor out chip-specific data structures from ar8xxx_priv 
Factor out chip-specific data structures from ar8xxx_priv.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43469
 2014-12-01 16:14:54 +00:00
John Crispin
a3b651635f ar8216: factor out set_mirror_regs to ar8xxx_chip 
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43468
 2014-12-01 16:14:43 +00:00
John Crispin
b82a08f5b6 ar8216: factor out mib_func to ar8xxx_chip 
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43467
 2014-12-01 16:14:39 +00:00
John Crispin
af003867b1 ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip 
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43466
 2014-12-01 16:14:32 +00:00
John Crispin
84df2274ff realview: add 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43465
 2014-12-01 16:14:26 +00:00
John Crispin
c27ee280ce ixp4xx: add 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43464
 2014-12-01 16:14:21 +00:00
John Crispin
00f5d358ac au1000: add 3.14 support 
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43463
 2014-12-01 16:14:07 +00:00
John Crispin
610311436e ar71xx: Add build profile for the gl-inet 6416A and 6408A 
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash

Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet

Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>

SVN-Revision: 43462
 2014-12-01 16:14:02 +00:00
Jonas Gorski
387fd3ca26 brcm63xx: add kernel 3.18 support 
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
 2014-12-01 13:27:26 +00:00
Jonas Gorski
e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible 
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
 2014-12-01 00:52:07 +00:00
Jonas Gorski
443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes 
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
 2014-12-01 00:51:56 +00:00
Jonas Gorski
d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes 
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
 2014-12-01 00:51:53 +00:00
Jonas Gorski
ef4f69adc0 brcm63xx: convert to irq domain 
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43454
 2014-12-01 00:51:51 +00:00
Jonas Gorski
bb312899f6 brcm63xx: refresh patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43453
 2014-12-01 00:51:24 +00:00
Jonas Gorski
2b46097364 brcm63xx: add DT support for DSL-2650U 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43452
 2014-12-01 00:51:17 +00:00
Jonas Gorski
61637aea1b brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43451
 2014-12-01 00:51:12 +00:00
Jonas Gorski
53214ca548 brcm63xx: Add DT support for F@ST2504n 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43450
 2014-12-01 00:51:08 +00:00
Jonas Gorski
40350a5daf brcm63xx: add DT support for F@ST2704V2 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43449
 2014-12-01 00:51:04 +00:00
Jonas Gorski
3872151ce0 brcm63xx: add DT support for F@ST2604 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43448
 2014-12-01 00:50:59 +00:00
Jonas Gorski
5f726ccd79 brcm63xx: add DT support for F@ST2404 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43447
 2014-12-01 00:50:56 +00:00
Luka Perkov
c691430897 kernel: add missing config symbol for 3.18 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43444
 2014-11-30 22:12:20 +00:00
Luka Perkov
201af1b219 malta: add more 3.14 kernel symbols 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43435
 2014-11-30 03:51:43 +00:00
Luka Perkov
7974f29558 kirkwood: change CRC32 implementation to CRC32_SLICEBY8 
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.

Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43434
 2014-11-30 01:20:38 +00:00
Luka Perkov
5c4f9198bb kirkwood: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43432
 2014-11-30 01:14:14 +00:00
Luka Perkov
dac3d29ec5 generic: set CONFIG_GENERIC_NET_UTILS 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43431
 2014-11-30 01:14:12 +00:00
Luka Perkov
070d3b27c2 kernel: update 3.14 to 3.14.25 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43427
 2014-11-29 10:30:58 +00:00
Luka Perkov
d11aefc8eb malta: add support for 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43426
 2014-11-29 10:30:55 +00:00
Luka Perkov
eef7c35952 malta: drop 3.12 config file 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43425
 2014-11-29 10:30:52 +00:00
Luka Perkov
0817bb762f x86: add support for 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43422
 2014-11-28 17:53:50 +00:00
Florian Fainelli
d73dc14957 kernel: 3.18: Fix patch 644 dependency chain 
This patch introduces some code that is compiled in whenever
CONFIG_BRIDGE_NETFILTER is built, with the code called from code compiled under
CONFIG_BRIDGE, CONFIG_BRIDGE_IGMP_SNOOPING or CONFIG_BRIDGE_NF_EBTABLES.

Unfortunately, these options aren't setting explicitly the dependency they now
have on CONFIG_BRIDGE_NETFILTER, for obvious reasons for CONFIG_BRIDGE.

However, this is not working really well when CONFIG_BRIDGE_NETFILTER is built
as a module, since code statically compiled will now use a function that is not
in the kernel image, which makes the linker grumpy.

Solve this by removing the option to build CONFIG_BRIDGE_NETFILTER as a module,
and protect our function definition by an IS_BUILTIN instead of a IS_ENABLED
macro. This fixes the issue for CONFIG_BRIDGE and CONFIG_BRIDGE_IGMP_SNOOPING.

Fixing CONFIG_BRIDGE_NF_EBTABLES has to be handled a bit differently, since it
directly references a variable that will not be declared if
CONFIG_BRIDGE_NETFILTER is not set. Protect the variable affectations by an
ifdef to make sure this doesn't happen.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43419
 2014-11-28 01:29:51 +00:00
Felix Fietkau
f473f95196 cns3xxx: fix PCIe->PCI bridge access (fixes #18422) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43414
 2014-11-27 20:54:18 +00:00
Felix Fietkau
ceccdc4a31 mpc85xx: update to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43413
 2014-11-27 18:26:24 +00:00
Felix Fietkau
1846efcaaf mpc85xx: refresh linux 3.14 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43412
 2014-11-27 18:26:17 +00:00
Felix Fietkau
d33db91a38 mpc85xx: remove the PHY reset change patch (no longer necessary) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43411
 2014-11-27 18:26:12 +00:00
Felix Fietkau
14db2826ad ar8216: suppress PHY reset for linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43410
 2014-11-27 18:26:06 +00:00
Felix Fietkau
77e1a3675a kernel: backport patches for overriding PHY reset to 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43409
 2014-11-27 18:26:00 +00:00
Felix Fietkau
ca2d0c15cc cns3xxx: add experimental 3.18 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43406
 2014-11-27 16:24:32 +00:00
Felix Fietkau
a03b522bd6 kernel: add missing KEEP() statements for gc-sections patch in 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43405
 2014-11-27 16:24:25 +00:00
Felix Fietkau
1f5987c5d3 kernel: keep __bug_table with gc-sections 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43404
 2014-11-27 15:02:11 +00:00
Felix Fietkau
d57b64dfb0 cns3xxx: fix pcie root bridge topology 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43403
 2014-11-27 15:02:05 +00:00
Imre Kaloz
974f286261 add D-link DGL-5500 A1 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43401
 2014-11-27 14:27:34 +00:00
Felix Fietkau
d0e4f71b9a cns3xxx: add missing dma mask for ethernet device 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43399
 2014-11-26 18:48:05 +00:00
Felix Fietkau
ebf6331c10 cns3xxx: switch to using the upstream dwc2 driver instead of dwc_otg 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43398
 2014-11-26 18:01:38 +00:00
Felix Fietkau
211669da3b cns3xxx: update to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43397
 2014-11-26 18:01:29 +00:00
Felix Fietkau
0525ffa4c5 cns3xxx: remove bogus image added in r38703 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43396
 2014-11-26 18:01:18 +00:00
Felix Fietkau
8c136e6b56 cns3xxx: set base device for ethernet port netdevs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43395
 2014-11-26 18:01:07 +00:00
Felix Fietkau
365cf9d10c cns3xxx: fix passing the device to dma mapping ops 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43394
 2014-11-26 18:00:52 +00:00
Imre Kaloz
7f6c05d97e fix the r6100's wan led name 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43393
 2014-11-26 11:38:59 +00:00
John Crispin
8dfb87bebc kirkwood: Add support for Iomega StorCenter ix2-200 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43391
 2014-11-26 09:00:48 +00:00
John Crispin
72b58f2eb1 add new target 'oxnas' 
This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43388
 2014-11-26 09:00:08 +00:00
John Crispin
271a4d804a kernel: unset CONFIG_ARM_CCN 
oldconfig kept asking for that config symbol...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43386
 2014-11-26 08:59:41 +00:00
John Crispin
47ab1cbf23 ar71xx: add support for TP-LINK CPE210/220/510/520 
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43385
 2014-11-26 08:59:32 +00:00
Imre Kaloz
15f6f67d18 Netgear R6100 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
 2014-11-26 08:28:22 +00:00
Jonas Gorski
1041e3be6e brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section 
The cpu port is at 8, not 5.

Fixes #18406.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43379
 2014-11-25 19:07:02 +00:00
Jonas Gorski
93e5c701cc brcm63xx: unify dt image generation 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43378
 2014-11-25 19:06:51 +00:00
Jonas Gorski
5e111b0330 brcm63xx: move rsa signature to additional options 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43377
 2014-11-25 19:06:43 +00:00
Jonas Gorski
e1eec53136 brcm63xx: fix image generation 
This fixes build issues introduced on r43361.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43376
 2014-11-25 19:06:38 +00:00
Imre Kaloz
60522c8ba7 rename overlayfs' symbol 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43375
 2014-11-24 22:09:47 +00:00
John Crispin
506cf51b53 ralink: fix pci reset patch 
sorry, forgot to make target/update before commiting the last patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43374
 2014-11-24 20:39:48 +00:00
John Crispin
b994aca1e4 mpc85xx: fix missing dts target for kernel 3.14 
With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa.
To maintain compatibility define p1010rdb-pa as new standard and
copy p1010rdb.dts to p1010rdb-pa.dts under 3.10.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43371
 2014-11-24 19:12:46 +00:00
John Crispin
41f9765acd ralink: add proper reset of pci core 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43370
 2014-11-24 19:12:35 +00:00
John Crispin
5f51cfcf55 imx6: make the default config bootable on ventana 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43369
 2014-11-24 19:12:19 +00:00
Imre Kaloz
f3df3bdb26 add initial 3.18 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43366
 2014-11-24 16:00:41 +00:00
Jonas Gorski
cf0c966d9a brcm63xx: do not build images for unsupported routers 
If there is no board support in the kernel, it does not make sense to
build images for devices. So drop any images for board ids for which
there are nc corresponding board_info structs in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43364
 2014-11-24 14:44:46 +00:00
Jonas Gorski
fb2a44df50 brcm63xx: refresh patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43363
 2014-11-24 14:44:40 +00:00
Jonas Gorski
c6fc6b42e1 brcm63xx: Add DT support for SPW303V 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43362
 2014-11-24 14:44:33 +00:00
Jonas Gorski
5540ca300e brcm63xx: Add DT support for DV-201AMR 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43361
 2014-11-24 14:44:28 +00:00
Jonas Gorski
89000dea4c brcm63xx: Add DT support for RG100A 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43360
 2014-11-24 14:44:23 +00:00
Jonas Gorski
13d6fa0081 brcm63xx: Add DT support for A226G/M 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43359
 2014-11-24 14:44:19 +00:00
Jonas Gorski
b3ce1c4ea6 brcm63xx: Add DT support for AGPF-S0 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43358
 2014-11-24 14:44:12 +00:00
Imre Kaloz
c26c5eff0e update .18 support for -rc6 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43357
 2014-11-24 10:17:33 +00:00
Felix Fietkau
35902404fc ar8216: Fix issue with autoneg being disabled under 3.14, revert 43332 
Patch reverts 43332 which seems to cause issues with VLAN functionality.
Add a specific check to check whether ANEG is still enabled and re-enable
it if necessary. Disable generic phy soft reset for kernel >=3.16.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43356
 2014-11-24 09:33:48 +00:00
Florian Fainelli
a2768bd9e0 arm64: add ARM 64-bits target 
This target can be emulated using ARM's Foundation_V8 simulator
software or qemu-system-aarch64 using the command-line described in the
README file.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43355
 2014-11-24 06:34:07 +00:00
Felix Fietkau
174d16e59f ar71xx: merge changes from 3.10 that were forgotten for 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43347
 2014-11-23 16:27:19 +00:00
Felix Fietkau
25cb8318cd ar71xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43344
 2014-11-23 13:54:28 +00:00
Felix Fietkau
0179456212 ar71xx: switch to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43343
 2014-11-23 13:54:22 +00:00
Jonas Gorski
2bab3e2796 brcm63xx: move board compatible strings into a table 
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
 2014-11-22 12:25:52 +00:00
Zoltan Herpai
352c7d3cb2 sunxi: add config for 3.18 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43338
 2014-11-21 18:49:56 +00:00
Zoltan Herpai
9c54f7f312 sunxi: add initial 3.18 support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43337
 2014-11-21 18:42:43 +00:00
Rafał Miłecki
c84fe94b0d brcm47xx: add support for Netgear WGR614 V10 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
 2014-11-20 22:15:21 +00:00