Linux 4.0 was released on 2014-04-12
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45559
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
CMAKE_ASM_COMPILER is automatically set to CMAKE_C_COMPILER by CMake, but
CMAKE_C_COMPILER_ARG1 is lost. This causes assembly builds to fail when ccache
is enabled (for example the package fastd on x86).
Fix this by explicitly defining CMAKE_ASM_COMPILER and CMAKE_ASM_COMPILER_ARG1.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45119
Set it to the filesystem which is build. mktplinkfw need to know which filesystem
is used.
FILESYSTEM can be squashfs, jffs2-64k, ...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44997
set DISABLE_NLS only if CONFIG_BUILD_NLS NOT set.
like DISABLE_IPV6 which depends on CONFIG_IPV6
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44930
Defining STAMP_CONFIGURED statically caused it not to reflect changes to
PKG_CONFIG_DEPENDS made after including package.mk, like the additional options
added by feeds.mk for all packages.
Furthermore, as STAMP_CONFIGURED_WILDCARD was already defined recursively, the
patsubst in its definition would never match, and in consequence, the stamps
were never removed. This caused packages not to be rebuilt when they should have
been.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44927
When enabling SSP_SUPPORT, a lot of packages fail during compile phase
with the following error:
Package X is missing dependencies for the following libraries:
libssp.so.0
This can be solved by adding an optional dependency on libssp to all
those packages, but as there are quite a few packages both in OpenWrt
core and in the package repository, it might make sense to add this
optional dependency to all non-kernel packages, instead of polluting
lots of package dependency lines with it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 44911
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44876
Split out kmods from ALL to make it easier to create local builds that
are compatible kmod-wise with releases.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44830
It's the eglibc packaging with a bit of spit-polishing. And testing. :-)
[blogic: merged glibc and eglibc into 1 and made eglibc a glibc variant]
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44701
We need to do that to pickup the prereq-build prepared symlinks for auxillary
operations like metadata scanning.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44378
If some packages are overridden (using ./scripts/feeds -f), add a new
taint flag in /etc/openwrt_release. We'll use the CONFIG_OVERRIDE_PKGS
variable reported through the .config to detect it.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44337
Packages overridden with "./scripts/feeds -f" will show up with an
"Override: <original-package-name>" in .packageinfo.
This will be useful to create a corresponding option in .config and
use this information during the build process.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44335
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package in a
feed but with a different name, which causes all kind of problems
related to dependencies (all packages selecting it would have to be
modified accordingly to select the new package).
With this change, if a package with the same name is present both in
feeds/ and package/ folders, the one in feeds/ can override the one
in package/, both in the menuconfig and during the build, by passing the
"-f" option to "./scripts/feeds install"
This mechanism is particularly useful for vendor tree, or in general for
application which needs to replace one particular package which exists
within openwrt.git by a custom/newer version.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44334
Instead introduce a generic "make prepare" target which is executed if
include/prepare.mk exists.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44329
Perl might not be present while checking prereqs, e.g. on a fresh
FreeBSD install.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44276
Bash is not guaranteed to be present, e.g. on a fresh FreeBSD install
so perform prereq tests with /bin/sh.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44275
Also move tests from tools/Makefile and include/host.mk here to have all tests
in a central place.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44271
Those macros allow testing various commands on the host system, also process the
prereq tests in the order they're declared.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44269
Few characters in filenames (a plus sign, a dot) can be interpreted
specially by grep. This can lead to the omission of missing package
dependency. For example if we would have "some.file.so" then it
matches also "some2file.so". -F switch off special meaning
of any character and -x match against whole line.
Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>
SVN-Revision: 44247
* enclose the fixup in brackets
* match anything in the call to AM_GNU_GETTEXT_VERSION
* call it early (before autoreconf if both are specified)
* chain a call to autoreconf since it messes with configure.ac
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44225
Anchor search pattern when testing dependencies, otherwise the check may
succeed in cases where it shouldn't, e.g. when matching "udp_tunnel.ko"
against "ip6_udp_tunnel.ko".
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44207
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package in a
feed but with a different name, which causes all kind of problems
related to dependencies (all packages selecting it would have to be
modified accordingly to select the new package).
With this change, if a package with the same name is present both in
feeds/ and package/ folders, the one in feeds/ can override the one
in package/, both in the menuconfig and during the build, by passing the
"-f" option to "./scripts/feeds install"
This mechanism is particularly useful for vendor tree, or in general for
application which needs to replace one particular package which exists
within openwrt.git by a custom/newer version.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44076
On systems with CONFIG_SITE in the environment (e.g. OpenSUSE) make will export
the CONFIG_SITE set in include/package.mk by default. This will cause host
builds to get the target site configuration, leading to all kinds of weirdness
(wrong pointer size, wrong endianess).
Fix this by explicitly unexporting CONFIG_SITE. The explicit export for the
target builds overrides the unexport, so the target builds will still correctly
get the site config.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44019
Introduce configuration options to build an "hardened" OpenWRT.
Options to enable Stack-Smashing Protection, FORTIFY_SOURCE and RELRO
have been introduced.
uClibc makefile now automatically detects if SSP support is necessary.
hostapd makefile has been fixed to use "^" as sed separator since
using a comma was problematic when using "-Wl,-z,now" and the like in
TARGET_CFLAGS.
Currently enabling SSP on user space depends on enabling SSP kernel
side, this is due to the fact that TARGET_CFLAGS are used to build
kernel modules (at least). Suggestions on how to avoid this are welcome.
Using "select" instead of "depends on" doesn't seem to work with choice
entries.
Tested with a lantiq (WBMR) router, GCC 4.8, uClibc and a subset of
the available packages.
Needs to be tested with GCC 4.9 and the remaining packages.
PIE not currently included.
Signed-off-by: Alessandro Di Federico <ale+owrt@clearmind.me>
SVN-Revision: 44005
This simplifies building device / profile specific images, and allows
the build system to parallelize generating images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43907
Initialize a Git repository in the SDK and use git reset / git clean
to rollback any SDK changes with "make clean" or "make dirclean".
This approach is more robust than nuking entire directory trees because
some parts of them might have been shipped with the original archive.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43904
Implement "%s" placeholder that expands to either the target name,
e.g. "ar71xx" if the subtarget is generic or to target.subtarget, e.g.
"ar71xx.nand" is a subtarget is choosen.
Also change the default repository url template to use "%s" instead
of "%T" to reflect the directory structure used by the buildbot systems.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43871
This commit introduces a new option CONFIG_VERSION_FILENAMES which causes
OpenWrt to embed the version number in generated image files, SDK- and
ImageBuilder archives.
The option is enabled by default if CONFIG_VERSIONOPT is set.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43869
When using UbinizeImage with ubifs rootfs, ubinize.cfg is no longer
needed. Yet, the absance of ubinize.cfg would make the build process
abort with an error.
Fix that by checking if ubinize.cfg is present and do no not call the
"classic" ubinize image generation if it isn't.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[missing new-line before UbinizeImage added itentionally]
SVN-Revision: 43788
Since GCC 4.7, GCC provides its own wrappers around ar, nm and ranlib, which
should be used for builds with link-time optimization. Since GCC 4.9, using them
actually necessary for LTO builds using convenience libraries to succeed.
There are some packages which try to automatically detect if gcc-{ar,nm,ranlib}
exist (one example is my package "fastd" in the package repository, which tries
to use LTO). This breaks because the OpenWrt build system explicitly sets the
binutils versions of these tools.
As it doesn't cause any issues to use gcc-{ar,nm,ranlib} instead of
{ar,nm,ranlib} even without LTO, this patch just makes OpenWrt use the
GCC-provided versions by default, which fixes the build of such packages with
GCC 4.9.
(I know that builds fail though when clang is used with -flto and
gcc-{ar,nm,ranlib}, but as all OpenWrt toolchains are based on GCC, this isn't
a real issue.)
Completely cleaning the tree (or at least `make clean toolchain/clean`) is
necessary to get a consistent state after the binutils plugins support patch and
this one (as trying to use gcc-{ar,nm,ranlib} with a binutils built without
plugin support will definitely lead to a build failure).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43784
x64 is handled by the x86 architecture in Linux, add a case for it in
LINUX_KARCH.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43672
Switch to a dumber implementation that will be easier to maintain in the long
run, with only if statements instead of having nested subst calls.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43671
We don't ship the kernel sources, so using the base git as a feed will
fail when trying to build kernel modules with separate install steps.
Instead of trying to fixup the install steps, let's just skip building
kernel modules alltogether and just create empty packages.
Out-of-kernel modules are still expected to exist and are packaged, as
for these sources are fetched during the normal build steps.
Reported-by: Jo-Philipp Wich <jow@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43525
On out-of-tree modules depending on other out-of-tree modules from a
different tree, module dependencies are not filled properly.
This change helps with adding those dependencies in the AutoLoad call
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43323
Building current trunk with 3.18 kernel fired some errors like 'missed
dependancy of module XXX from library kmod_YYY.ko'. These patch fixes 3
of such issues which are critical to have a successful build.
Signed-off-by: Alexey N Vinogradov <a.n.vinogradov@gmail.com>
SVN-Revision: 43318
The 3.18 kernel introduced new Kconfig options for the xt_nat and iptable_nat
kernel modules, that both belong to the ipt_nat kernel package.
Enable this new options.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43212
This patch adds the userspace and kernelspace for
- match NETFILTER_XT_MATCH_CLUSTER
This match can be used to deploy gateway and back-end load-sharing clusters.
- target IP_NF_TARGET_CLUSTERIP
This module allows you to configure a simple cluster of nodes
that share a certain IP and MAC address
without an explicit load balancer in front of them.
Connections are statically distributed between the nodes in this cluster.
This is used i.e. by strongswan-ha.
Signed-off-by: Christian Scheele <cs@embedd.com>
SVN-Revision: 43174
Many packages define already metadata about their license (PKG_LICENSE),
but this is only included in the ipk files.
This change allows to create the information also on the build-host,
to get an overview on the used licenses.
In the full list, also all packages without this info are shown
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
SVN-Revision: 43070
All platforms which are using 3.10.x at the moment are upgraded.
Changelogs:
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58
A new symbol 'X86_16BIT' appeared in 3.10.52 with commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f
("x86-espfix-make-it-possible-to-disable-16-bit-support.patch")
I defaults to 'unset', but it's worth a discussion to enable it
("turn off support for any 16-bit software").
Also removed the patch 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e
("fix build failure on memcpy() in decompress.c")
and is obsolete by commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
included in kernel 3.10.56
compile tested on all platforms with:
make tools/install
make toolchain/install
make target/linux/compile
user@box:~/user/openwrt$ cat /tmp/log.txt
[Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK
[Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK
[Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK
[Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK
[Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK
[Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK
[Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK
[Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK
[Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK
[Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK
[Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK
[Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK
[Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK
[Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK
[Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK
[Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK
[Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK
run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43049
Changeset r43017 reworked the ipkg control metadata generation but broke
the export of conffiles, postinst and prerm defines.
Change the code back to rely on shvar and shexport, this is required to
properly output multiline contents.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43041
- Consider not installed feeds as well
- Add option to decide whether to comment disabled feeds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42931
I defined a new download method @SAVANNAH in include/download.mk and scripts/download.pl,
and converted quilt and qemu to use that method.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 42840
The build system sets a make variable TAR_OPTIONS to the unpacking
command, i.e. "-xf -". Now if an environment variable with the same
name is set, the make variable is automatically exported to the
environment. The make variable is added to the tar command in the
makefile, and tar adds the environment variable. This results in a
command like "tar -c /some/dir -xf - -xf -" which of course doesn't
work. It is also difficult to spot as the second "-xf -" is not
visible on the command line.
I suggest this is fixed by unexporting TAR_OPTIONS as I see no use
of the evironment variable, and it is changed from the original
value anyway.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
SVN-Revision: 42794
Otherwise the modpost steps for individual modules that are compiled
manually (using make package/<name_of_module>/install) will give warning
of missing symbols when that module depends other modules.
This is caused by the Module.symvers file not containing any symbols
anymore of external modules when the initramfs image is built without
specifically giving the modules target.
Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>
SVN-Revision: 42773
Recent kernels started to mark exported symbols as global.
Adapt expressions in kernel-build.mk to also match global symbols
when grep'ing through nm output.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 42555
config.{sub,guess} could be symlinks to a shared common version of
this file (e.g. in staging). So we remove the destination file via
--remove-destination option of cp. This prevents replaceing the
common file that other packages could be build with if running at
the same time.
This fixes a class of errors where config.sub is missing, or
only partially present when running configure because a cp is
currently in progress
This is commonly seen building with a lot of parallel jobs and
on packages that use 'PKG_FIXUP:=autoreconf'
Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 42547
the postinst script enables/starts the init.d scripts upon package installation
and installs the users required by the package.
the prerm script stops and disables the init.d scripts.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42470
this is in preparation of having services run as !root with
ACL'ed access to ubus.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42469
The idea is still to enable it by default at some point
I've tested all ar71xx packages (except oldpackages) using CONFIG_ALL=y
Failing packages have been marked with PKG_CHECK_FORMAT_SECURITY:=0 for now
I can test more targets but i have no idea which are the most used
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 42282
NFLOG and NFQUEUE targets' full support for iptables.
Includes all needed kernel modules (Xtables's and Netlink's)
and userspace libraries.
All added kernel modules can be individually disabled,
all other new libraries get their own individual packages.
Reported-by: Fabian Hugelshofer <hugelshofer2006@gmx.ch>
Reported-by: Rainer Poisel <rainer.poisel@fhstp.ac.at>
Reported-by: Derek LaHousse <dlahouss@mtu.edu>
Signed-off-by: Guillaume Déflache <guillaume.deflache@ibwag.com>
SVN-Revision: 42022
This changeset implements a new menuconfig option to generate separate
repositories for each enabled package feed instead of one monolithic one.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42002
This commit implements a new netfilter match "xt_id" which can be used to
attach unsigned 32bit IDs to iptables rules.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41945
Make sure they don't break the sed command, and also make device_info
and openwrt_release more robust for parsing by scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41885
Creates /etc/device_info which will be used to fill in information for
WPS and other protocols that need manufacturer/device information
This helps with creating OpenWrt firmware for OEM or rebranded devices.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41884
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41351
Removed unused ubi file file from template as ubinized images are
passed directly and not inside the tarball.
Also removed left-over white-space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41237
With this patch the mips74k subtarget will be compiled with optimized
compiler options to generated smaller and faster code. This currently
breaks broadcom-wl, because the binary blob is only compiled with
mipsr1 support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41050
This allows the selection of a specific branch in the menuconfig
when using a kernel downloaded from GIT.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40946
The way git options are managed in kernel-defaults.mk makes additions
difficult. If requires different code path for each option; it's
ok so far as we handle only one option, but if we want to make the git
clone mechanism more flexible, more option will be required, which
will become tedious.
So; we'll move the GIT options into a variable, that may or may not be
set depending on the configuration, and we'll pass this variable to the
git command.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40945
The GIT_LOCAL_REPOSITORY option adds the --reference argument to the
git clone kernel command line, if KERNEL_GIT_CLONE_URI is set.
This option is intended to speed-up the repo creation by using local
objets rather than downloading it. However, a local repo can be cloned
much faster by setting GIT_LOCAL_REPOSITORY directly to the local tree.
In that case, git clone will bypass the normal "git aware" transport
mechanism and clone the repository by copying and hardlinking objects
rather than downloading it, resulting in a significant speed increase.
That makes the GIT_LOCAL_REPOSITORY option pretty useless so we'll just
remove it and recommand the usage of KERNEL_GIT_CLONE_URI directly.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40944
When using the options EXTERNAL_KERNEL_TREE or KERNEL_GIT_CLONE_URI,
the command "make downloads" fails as it tries to download the kernel
tarball despite the option. This doesn't happen during a regular build
as in that case, the dependency is conditionned through the LINUX_SITE
variable, which is not set in these cases.
Below is a snapshot of the error for an target using a 3.14 kernel:
make[3]: *** No rule to make target `.../dl/linux-3.14.tar.xz',
needed by `download'. Stop.
Change-Id: I1244969c1bbf9c81a6a64d68ae88ac58b0f8e79e
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40913
Remove leftover pieces from package-version-override.mk support
Add a new variable USE_SOURCE_DIR to use a custom build directory.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40527
This change does multiple things, all related to enable sparse usage as
a static analysis tool selectable from the OpenWrt configuration:
*add a KERNEL_SPARSE option in the config to add sparse to the kernel
build (through the C=1 option usage)
*add sparse as a new host tools. It will get selected automatically when
the above option will be enabled
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40490
