Commit graph

15480 commits

Author SHA1 Message Date
Felix Fietkau
10557694bb kernel: add missing symbols for 4.1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 48342
2016-01-18 23:35:18 +00:00
Felix Fietkau
2e7b00069a oxnas: switch to Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48340
2016-01-18 23:35:05 +00:00
Felix Fietkau
89d37aaa5c oxnas: add patches and config for Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48339
2016-01-18 23:34:59 +00:00
Felix Fietkau
cee6c07cf3 oxnas: prepare platform and drivers for Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48338
2016-01-18 23:34:51 +00:00
Felix Fietkau
354e5cdbe2 oxnas: fix the incorrect board names
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48337
2016-01-18 23:34:42 +00:00
Felix Fietkau
10220cd7e9 cns3xxx: re-enable CONFIG_CPU_SW_DOMAIN_PAN
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48336
2016-01-18 23:20:38 +00:00
Felix Fietkau
9c7d5fb570 kernel: work around CONFIG_CPU_SW_DOMAIN_PAN breakage on ARM11 MPCore
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48335
2016-01-18 23:20:18 +00:00
Felix Fietkau
87e4f9f009 cns3xxx: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48334
2016-01-18 22:38:23 +00:00
Felix Fietkau
91278df70e cns3xxx: fix a ethernet driver napi poll handling bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48333
2016-01-18 22:38:14 +00:00
Felix Fietkau
136747c564 cns3xxx: clean up SMP related code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48332
2016-01-18 22:38:09 +00:00
Felix Fietkau
8ecfa0e773 cns3xxx: fix adding twd local timers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48331
2016-01-18 22:38:03 +00:00
Felix Fietkau
f366dc25d3 cns3xxx: remove obsolete file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48330
2016-01-18 22:37:57 +00:00
Felix Fietkau
2ac8b1c1fe cns3xxx: remove unused define and use of a deprecated function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48329
2016-01-18 22:37:51 +00:00
Hauke Mehrtens
13b8b8c2e7 lantiq: add support for TP-Link VR200v
This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48328
2016-01-18 20:40:03 +00:00
Felix Fietkau
fcfc7eb2ae kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48327
2016-01-18 20:16:37 +00:00
Felix Fietkau
e620f4d6f8 arc: clean-up and move CFLAGS to include/target.mk
Most of currently mentioned CFLAGS in arc770/Makefile
are not really required because:
 [1] "-Os -pipe" are set by default in include/target.mk
 [2] "-fno-caller-saves" gets enabled via menuconfig
     as an extra compiler flag for developers

So the only one that makes sense is "-matomic" and
that one is really essential. Without it many software
packges won't build complainin on unresolved atomic ops.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48326
2016-01-18 17:52:03 +00:00
Felix Fietkau
018e84f58d arc770/axs101: fix console output
While bumping kernel version kernel command line was
unintentionally modified in attempt to make it closer
to upstream version.

In case of AXS that has not only serial port but HDMI/USB
both capable of being debug console we have 2 entries in
kernel's command line:
------------------->8-----------------
console=tty0 console=ttyS3,115200n8
------------------->8-----------------

But as it turned out OpenWRT uses procd as init instead of
Busybox. And in its turn procd gets the first "console"
entry from kernel command line (/proc/cmdline) and uses it
if default inittab is used:
------------------->8-----------------
...
::askconsole:/bin/ash --login
------------------->8-----------------

So what we got is non-functional serial console.
That change removes "console=tty0" which brings serial
console back to life.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48325
2016-01-18 17:51:54 +00:00
Felix Fietkau
85ba5805e4 kernel: fix a build regression in the ld-version script fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48324
2016-01-18 17:40:40 +00:00
Felix Fietkau
e7846156f2 lantiq: drop linux 4.1 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48323
2016-01-18 15:54:23 +00:00
Felix Fietkau
9b4b2b4e17 lantiq: switch to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48322
2016-01-18 15:54:18 +00:00
Felix Fietkau
6cec31da3c lantiq: fix VDSL device detection with Linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48319
2016-01-18 15:35:17 +00:00
Felix Fietkau
3c3fb1dfc0 ramips: delete the broken sound driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48318
2016-01-18 13:40:15 +00:00
Felix Fietkau
63aa7023d8 ramips: mark kmod-sound-mtk as broken, it does not compile properly
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48317
2016-01-18 13:22:38 +00:00
Felix Fietkau
fa61e3fbba ramips: fix kernel config handling for mt7620/mt7628 sound module
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48316
2016-01-18 13:22:34 +00:00
Felix Fietkau
edb3c1780c brcm2708: fix RPi model B plus support
Not sure if B+ is used or not (mine has B Plus) so leave both

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48311
2016-01-18 12:42:03 +00:00
Felix Fietkau
a168e972fb kernel: fix MIPS linux-4.4 build on non-GNU systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48310
2016-01-18 11:40:49 +00:00
Felix Fietkau
f577cb25c0 lantiq: Add support for linux 4.4
The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch

All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
  Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
  some PMU gates for the vrx200 / VR9 SoCs) were removed since the
  upstream kernel disables unused PMU gates automatically (since
  95135bfa7ead1becc2879230f72583dde2b71a0c
  "MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
  Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
  should use of_get_mac_address(). of_get_mac_address_mtd is not
  available for drivers anymore since it's called automatically within
  of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
  Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch

While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48307
2016-01-18 11:40:19 +00:00
Jonas Gorski
a78bb9590f brcm63xx: add support for Huawei HG622
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48305
2016-01-18 10:47:23 +00:00
Jonas Gorski
25ce154605 ipq806x: fix sysupgrade for AP148
AP148 uses lowercase name as boardname, so we need to use this in
platform.sh as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48304
2016-01-18 10:46:58 +00:00
Jonas Gorski
74aca7d913 brcm63xx: fix platform gpio lookups for gpios < 32
Overwriting static strings is never a good idea, especially expecting
identical strings to be stored in different memory locations.

This caused the lookups to always return the second chip's name. Fix
this by just initializing the lookup with the right values, so we
don't need to modify the strings at all.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48303
2016-01-18 10:46:50 +00:00
Jonas Gorski
2b3b4c95f1 b53: update header register difinitions
BCM531x5 has two pontential cpu ports, and header mode can be enabled
independently on both.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48302
2016-01-18 10:46:47 +00:00
Luka Perkov
cdfeab0931 imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300
2016-01-18 06:43:50 +00:00
Luka Perkov
c4de2dfd2d imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
2016-01-18 06:43:48 +00:00
Luka Perkov
85bdde7cf2 imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48298
2016-01-18 06:40:16 +00:00
Felix Fietkau
93a2b8a6c4 mpc85xx: update to linux 4.4, remove unnecessary patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48297
2016-01-17 21:05:19 +00:00
Felix Fietkau
d64465556c lantiq: Remove incorrect PCIe compatible strings
Re-defining the compatible property is not required since the correct
value is inherited from vr9.dtsi.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48295
2016-01-17 19:56:16 +00:00
Felix Fietkau
720f599c9a lantiq: Remove the old SPI driver patch
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48294
2016-01-17 19:56:10 +00:00
Felix Fietkau
04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau
5985c56ec6 lantiq: Add a rewritten version of the SPI driver
The new driver provides a few improvements over the old one:
- Separate compatible strings per SoC type (this allows removing some
  hardcoded of_device_is_compatible() checks)
- It does not rely upon spi-bitbang anymore
- chip-selects are numbered as in the datasheet (= starting at 1 instead
  of 0)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48292
2016-01-17 19:55:55 +00:00
Felix Fietkau
af857db692 lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48291
2016-01-17 19:55:48 +00:00
Felix Fietkau
d5c5928d6b lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48290
2016-01-17 19:55:42 +00:00
Felix Fietkau
d8b74320bd lantiq: Enable SPI for the EASY80920 board again
Also switch to the SPI definition provided by vr9.dtsi

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48289
2016-01-17 19:55:37 +00:00
Felix Fietkau
be8f9ad6f4 lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48288
2016-01-17 19:55:31 +00:00
Felix Fietkau
9d558fb48e lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi
This removes the duplicate SPI register definition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48287
2016-01-17 19:55:25 +00:00
Felix Fietkau
a5c177943b lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
This allows devices to use SPI without having to re-define (and thus
duplicating) the whole SPI node.
By default SPI is disabled (as before) because only few devices need it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48286
2016-01-17 19:55:17 +00:00
Felix Fietkau
3f8a426056 lantiq: Configure the PCIe reset GPIO using OF
After the latest pinctrl backports there are only 50 (instead of 56 as
before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now
462, before it was 456). This means that any hardcoded GPIOs have to be
adjusted.
This broke the PCIe driver (which seems to be the only driver which uses
hardcoded GPIO numbers), it only reports:
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	pcie_rc_initialize link up failed!!!!!

To prevent more of these issues in the future we remove the hardcoded
PCIe reset GPIO definition and simply pass it via device-tree (like the
PCI driver does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48285
2016-01-17 19:55:10 +00:00
Felix Fietkau
1204a1b1e5 lantiq: Use the new pinctrl compatible strings
These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48284
2016-01-17 19:55:04 +00:00
Felix Fietkau
ee03fc430d lantiq: Backport upstream pinctrl-xway patches from 4.5
Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated
devicetree bindings" allows us to use each pin in the pinmux. This is
useful for example in the "spi" group which contains some pins which
are inputs, and some which are outputs.
These can only be used once the new compatible strings for the pinctrl
node are used.
Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix"
(which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were
replaced with their upstream variants which are also in 4.5.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48283
2016-01-17 19:54:59 +00:00
Gabor Juhos
55b0e261a4 ar71xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 48279
2016-01-17 15:29:03 +00:00
Felix Fietkau
b7aab03486 ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4
Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash.

Credit to @Tuochenlyu on GitHub.

Signed-off-by: Chris Marchesi <chrism@vancluevertech.com>

SVN-Revision: 48276
2016-01-17 11:16:56 +00:00
Felix Fietkau
271a348cda mpc85xx: Add PTP node for TL-WD4900 in device tree
PTP requires at least one timer to be 1PPS so describe it.
For testing, load kernel module gianfar_ptp and use ptp4l
from linuxptp.

Copied from FSL P1010RDB reference design.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 48275
2016-01-17 11:16:52 +00:00
Felix Fietkau
deb4c31da4 lantiq: Fixed brnImage signature for the VGV7510KW22BRN images
The old signature only worked because brnboot ignores the leading "5" in
the signature. We can see the correct signature when flashing a brnImage
via recovery web-interface, in this case brnboot reports:
	[CGI-Signature Check] buf:[BRNDA6431], sigInFlash:[BRNDA6431]

Thanks to Mathias Kresin for reporting this.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48269
2016-01-17 10:47:10 +00:00
Felix Fietkau
f8d2ec6e9d ar8327: add IGMP Snooping support
This add support for IGMP Snooping on atheros switches (disabled by default),
which avoids flooding the network with multicast data.

Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding
on each specific port, enabling it back again prevents each port from
receiving all multicast packets.

Partially based on: http://patchwork.ozlabs.org/patch/418122/

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48268
2016-01-17 10:42:46 +00:00
Felix Fietkau
4224b52c3a brcm2708: add linux 4.4 support
- random-bcm2708 and spi-bcm2708 have been removed.
- sound-soc-bcm2708-i2s has been upstreamed as sound-soc-bcm2835-i2s.

Let's keep linux 4.1 for a while, since linux 4.4 appears to have some issues
with multicast traffic on RPi ethernet:
https://gist.github.com/Noltari/5b1cfdecce5ed4bc08fd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48266
2016-01-17 10:42:23 +00:00
Felix Fietkau
cad399c87b uml: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48265
2016-01-17 10:41:52 +00:00
Felix Fietkau
7c0260117f lantiq: Switch to the generic mtdsplit parser implementations
This removes the arch-specific mtdsplit parsers and enables the generic
implementations for brnImage, EVA and TP-Link instead.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48264
2016-01-17 10:41:46 +00:00
Felix Fietkau
7703e14bc4 kernel: mtdsplit_squashfs: Align with the erase-block size
On most image types the rootfs ends at an erase-block. However, at least
with brnImages this is not the case: while the partitions are aligned
with the erase-block size there is a 12 byte footer at the end of the
partition which must not be touched by any filesystem. This lead to a
rootfs_data partition which was not aligned properly (and thus ended up
being readonly):
	0x000000480000-0x00000085a800 : "rootfs_data" (128 KiB EB)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48263
2016-01-17 10:41:30 +00:00
Felix Fietkau
651083bbd9 kernel: mtdsplit: add support for EVA images
This allows splitting EVA images (usually found in fritz devices). The
firmware will be split into a kernel and a separate rootfs partition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48262
2016-01-17 10:41:08 +00:00
Felix Fietkau
bdd2772f1d kernel: mtdsplit: add support for brnImages
This adds brnImage (used with the brnboot bootloader) firmware parsing
support. brnboot verifies the integrity of the firmware stored on the
"Code Image" partitions by looking at the 12 byte footer at the very end
of the partition. This footer contains the checksum of the original
brnImage (kernel + rootfs/squashfs) and must not be touched (by our JFFS2
rootfs_data - otherwise the image will not be bootable anymore).

Big thanks to Mathias Kresin for analyzing the brnImage structure and
finding out the information how to keep images valid even when adding a
nested rootfs_data partition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48261
2016-01-17 10:40:51 +00:00
Felix Fietkau
3348279eca kernel: disable bogus DEVTMPFS config overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48260
2016-01-17 10:40:36 +00:00
Felix Fietkau
e0de7275f9 imx6: kernel: Add Micrel PHY used on Apalis SOM
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Cc: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48249
2016-01-15 15:18:23 +00:00
Felix Fietkau
321823ba05 imx6: add 4.4 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48248
2016-01-15 15:18:18 +00:00
Felix Fietkau
d475624f64 arc770: move arc patches to target/linux/generic
Given those patches are relevant to any ARC platform and even
ISA version it makes perfect sense for patches to exist
in one place instead of being duplicated for each new ARC-based ASIC.

Note this is a prerequisite for upstreaming of ARC HS38 support in
OpenWRT.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48241
2016-01-15 10:49:11 +00:00
Felix Fietkau
4514589182 arc770: bump linux kernel from 4.3 to 4.4
This switch involved:
 [1] Regeneration of config (few options went away)
 [2] Regeneration of patches so they apply cleanly (different offsets)
 [3] Update of .dts files because we now explicitly specify
     memory regions in use as opposed to previously used offset
     from 0x8000_0000

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48240
2016-01-15 10:49:01 +00:00
Felix Fietkau
7f11532c58 kernel: compile out SNMP MIB related counting if debloat-proc is active - improves network stack performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48239
2016-01-15 10:47:14 +00:00
Felix Fietkau
09ad818ffc kernel: backport perf build fixes to 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48231
2016-01-14 01:00:38 +00:00
Felix Fietkau
021f3834a7 kernel: remove obsolete config symbols from 4.4
Only remove old symbols for 4.4 since older Kernels might be
removed sooner/later and 4.4 is the next LTS

build tested against:
 omap 4.4 CONFIG_ALL_KMODS
 x86_64

List of enabled & orphaned symbols:

-CONFIG_ARPD=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_CAVIUM_OCTEON_HELPER=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_DISABLE_DEV_COREDUMP=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_HOTPLUG=y
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-CONFIG_INLINE_SPIN_UNLOCK=y
-CONFIG_LEDS_GPIO_OF=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MISC_DEVICES=y
-CONFIG_MTD_CHAR=y
-CONFIG_NETDEV_1000=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_VENDOR_SILICOM=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EZUSB=y

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48230
2016-01-14 01:00:13 +00:00
Hauke Mehrtens
cb6b7be43f lantiq: remove clk_round_rate() patch
This patch was merged into upstream Linux 4.1.
This fixes #21587 and was introduced in r48223.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48229
2016-01-13 20:46:12 +00:00
Felix Fietkau
5c5c60fec4 ar71xx: fix ethernet MAC reset on DMA hang
Fully reset the chip like on a full up/down, but without the PHY
statemachine restart.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48228
2016-01-13 16:22:16 +00:00
Felix Fietkau
cf2cf43717 ar71xx: extend ethernet DMA stuck check to all ar724x (and newer) chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48227
2016-01-13 16:22:05 +00:00
Hauke Mehrtens
de18003b6e kernel/3.18: update to version 3.18.25
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48225
2016-01-12 20:53:04 +00:00
Hauke Mehrtens
cdb83aaf5f kernel/4.3: update to version 4.3.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224
2016-01-12 20:52:19 +00:00
Hauke Mehrtens
93b50ade93 kernel/4.1: update to version 4.1.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48223
2016-01-12 20:51:34 +00:00
Hauke Mehrtens
ba3a749f9b kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
2016-01-12 20:50:41 +00:00
Felix Fietkau
a68d8a660a pxa: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48217
2016-01-12 10:08:18 +00:00
Felix Fietkau
2172d7dbbf x86: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48216
2016-01-12 10:04:55 +00:00
Felix Fietkau
9e7a66d195 kernel: add missing symbols for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48215
2016-01-12 10:04:47 +00:00
Jo-Philipp Wich
2224dbdb9d sdk: add base repository fallback
When the build system cannot infer its own repository url then let it fall
back to http://git.openwrt.org/ for the base feed.

The path to openwrt.git is guessed from the VERSION_NUMBER variable:

 "unknown" or "r12345" -> http://git.openwrt.org/openwrt.git
 "15.05.1"             -> http://git.openwrt.org/15.05/openwrt.git

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48212
2016-01-12 09:25:45 +00:00
Felix Fietkau
6318ff744d target/sdk: include modules.builtin, it is necessary for packaging kernel modules
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48206
2016-01-11 23:11:09 +00:00
Felix Fietkau
f875e18fd2 kernel: Update kernel 4.4 to 4.4.0
This removes one patch which was applied upstream with commit
67b9bcd36906e12a15ffec19463afbbd6a41660e. All other patches were
refreshed.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48203
2016-01-11 20:13:17 +00:00
Felix Fietkau
fed29fa36b x86: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48190
2016-01-10 17:19:51 +00:00
Felix Fietkau
b34a86691f x86: remove the rdc subtarget, it was broken for ages and nobody cared
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48189
2016-01-10 17:19:46 +00:00
Felix Fietkau
826cfa5773 ar71xx: fix ap152 support
- ethernet gigabit pll
- switch configuration
- sysupgrade

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48187
2016-01-10 17:19:34 +00:00
Zoltan Herpai
a6611a92d5 sunxi: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48161
2016-01-09 16:20:39 +00:00
Zoltan Herpai
24894e52bc sunxi: prep module support options for 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48160
2016-01-09 16:19:21 +00:00
Zoltan Herpai
26c04e09a2 kernel/4.4: add missing config options
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48159
2016-01-09 15:42:06 +00:00
Felix Fietkau
7dfbac8073 target/sdk: do not include the target staging dir anymore, it is unnecessary now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48157
2016-01-08 23:18:18 +00:00
Felix Fietkau
4a7340d8c6 target/sdk: ship .ko files to allow rebuild of the base kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48156
2016-01-08 23:18:14 +00:00
Felix Fietkau
471a567a88 ramips: do not rely on $(BIN_DIR) installed files during image build (for ubnt-erx)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48147
2016-01-06 18:39:13 +00:00
Felix Fietkau
2499a57d92 targets: add kernel image dependencies on device tree files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
Felix Fietkau
947eac1803 ramips: do not attempt to build ubnt-erx initramfs image if initramfs support is disabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48144
2016-01-06 18:38:44 +00:00
Rafał Miłecki
5f69279dd6 swconfig: add API for setting port link speed
Some switches can force link speed for a port. Let's add API that will
allow drivers to export this feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48142
2016-01-06 18:32:21 +00:00
Felix Fietkau
56608a777e ramips: fix duplicate /dts-v1/ line for WRTNODE2
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

SVN-Revision: 48138
2016-01-06 00:04:14 +00:00
Felix Fietkau
48a57b1ead ramips: set mips16 support
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

SVN-Revision: 48131
2016-01-04 22:35:36 +00:00
Zoltan Herpai
de4145c102 sunxi: fix Lamobo R1 board detection
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48130
2016-01-04 15:53:36 +00:00
John Crispin
e85230ce2e ralink: add a few mt7688 fixes that got lost in the v4.3 bump
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48115
2016-01-04 14:21:24 +00:00
John Crispin
eb9fccc440 ralink: update the usb phy driver to the version sent upstream
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48114
2016-01-04 14:21:17 +00:00
John Crispin
9b675a2a33 ralink: fix USB compatible strings
switch to the upstream compatible strings for ehci and ohci support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48113
2016-01-04 14:21:11 +00:00
Rafał Miłecki
e17c1e45ad bcm53xx: fix USB patch breaking 4.4 compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48112
2016-01-04 12:28:46 +00:00
Rafał Miłecki
ccb7d794ff kernel: update bcma by backporting 4.4 and 4.5 patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48111
2016-01-04 12:22:24 +00:00
Felix Fietkau
e14d2aee0a kernel: add at803x fix for sgmii mode
Some (possibly broken) bootloaders incorreclty initialize at8033
phy. This patch enables sgmii autonegotiation mode.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48109
2016-01-03 23:13:16 +00:00
Felix Fietkau
54b4265873 kernel: move at803x phy patch to generic
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48108
2016-01-03 23:13:11 +00:00
Felix Fietkau
ef215468f1 ar71xx: ensure that LOADADDR is passed to lzma-loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48101
2016-01-03 20:57:16 +00:00
Felix Fietkau
f49dadb0bd ar71xx: fix factory images for WNR2200 (#19807)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48085
2016-01-03 14:45:26 +00:00
Felix Fietkau
def6be413c target/sdk: Fix filename with external toolchain
When building SDK with external toolchain, don't
include _gcc in the filename

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48084
2016-01-03 14:45:18 +00:00
Felix Fietkau
0a0bfc8507 images imagebuilder: Allow to add sanitized extra name
For final output image names allow user to add an
extra string (which is sanitized).  This is particularly
useful with ImageBuilder where you may generate multiple
images from the same base and for the same board,
with different package selections and additional files
(via FILES=).

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48083
2016-01-03 14:44:56 +00:00
Felix Fietkau
d69efa4e15 targets: Use configured distribution name for SDK, IB, and Toolchain tarball names
We allow to configure the version distribution name;
let's also use it for the tarballs (SDK, ImageBuilder,
and SDK).

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48081
2016-01-03 14:44:42 +00:00
Felix Fietkau
2274fbc8db target/toolchain: Fix tarball filename
Toolchain makefile was missing include of version.mk
so the openwrt version was missing from the filename.
This patch fixes that.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48080
2016-01-03 14:44:36 +00:00
Felix Fietkau
67877462a2 malta: fix generating network configuration
With the default network config provided by package base-files present,
board_detect won't create a new config from board.json.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 48076
2016-01-03 11:36:26 +00:00
Felix Fietkau
0da9da0d33 ar71xx: another fix to wndr3700_board_detect
My last bugfix (r47538) introduced a new bug in wndr3700_board_detect
(again...).

Assigning the result of ar71xx_get_mtd_offset_size_format to the model
variable before stripping of garbage using awk will cause all NUL bytes to
be removed before awk is applied, leading to model strings like
"NETGEAR WNDRMACv2NETGEAR", where a NUL byte after the v2 is supposed to
terminate the string.

Fix by calling ar71xx_get_mtd_offset_size_format twice, once piping to awk
directly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48075
2016-01-03 11:09:45 +00:00
Rafał Miłecki
b836a7c29d ledtrig-netdev: don't stop timer on events for different interfaces
This fixes regression introduced in my recent ledtrig-netdev commit.
Events triggered by different interfaces were stopping timer so it
wasn't working for tx/rx mode.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48072
2016-01-02 20:38:56 +00:00
Felix Fietkau
c69ffda546 ramips: clean up and refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48070
2016-01-02 14:48:27 +00:00
Felix Fietkau
140be9f1a5 ramips: fix performance counters on mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48069
2016-01-02 14:48:11 +00:00
John Crispin
fb2d204ce4 ralink: more esw_rt3050 fixes
the IRQ was not setup properly causing an oops

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48064
2016-01-02 11:44:08 +00:00
Rafał Miłecki
ef53dc754f bcm53xx: switch to simpler devm_gpiod_get in USB driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48062
2016-01-02 10:49:46 +00:00
Rafał Miłecki
7bede46e58 kernel: make bcm47xxpart work with TRX flashed at bad block(s)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48061
2016-01-02 00:33:48 +00:00
Rafał Miłecki
224984ca01 kernel: drop bcm47xxpart patch for Xiaomi
It was never tested, most likely not working (because of le32_to_cpu)
and not upstreamed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48060
2016-01-02 00:33:31 +00:00
Imre Kaloz
cae1c44e4f generic/4.4: update to 4.4-rc7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 48059
2016-01-01 22:02:47 +00:00
John Crispin
9242d27b4a V2 ar71xx : Add Support for the Bitmain Antrouter R1
This patch adds support for the Bitmain Antrouter R1

http://wiki.openwrt.org/toh/bitmain/r1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 48058
2016-01-01 21:21:13 +00:00
John Crispin
8c80e915a0 lantiq: Add the xbar to vr9.dts
linux 4.4 (since commit 08b3c894e56580b8ed3e601212a25bda974c3cc2
"MIPS: lantiq: Disable xbar fpi burst mode") requires that the xbar is
defined in the .dts of vrx200 (VR9) SoCs.

SVN-Revision: 48056
2016-01-01 21:21:00 +00:00
John Crispin
6ca6a98622 ramips: Remove LED GPIO definitions in MQmaker WiTi device tree
LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 48055
2016-01-01 21:20:54 +00:00
John Crispin
de7dce21a3 ralink: add WRTnode2 platform and led support
Signed-off-by: xzmu <xzmu@wrtnode.com>

SVN-Revision: 48049
2016-01-01 21:19:50 +00:00
John Crispin
df165974c3 ledtrig-netdev: add support for renamed devices
The ppp0 interface is renamed after the connection is established. Due
to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of
the renamed interface and literally ignores the device
(no tx/rx indication, led isn't switched off with 'ifdown wan').

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48048
2016-01-01 21:19:41 +00:00
John Crispin
6f95d749d6 lantiq: match default xdsl mode and default wan interface
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48047
2016-01-01 21:19:32 +00:00
John Crispin
a9896bf106 lantiq: convert vendorid into human readable form
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48046
2016-01-01 21:19:27 +00:00
John Crispin
436fdee272 lantiq: add the current profile to the stats output
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48045
2016-01-01 21:19:21 +00:00
John Crispin
28a700de9b lantiq: TDW8980 - use devicename:colour:function led naming scheme
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48044
2016-01-01 21:19:12 +00:00
John Crispin
c584aed6b1 lantiq: P2812HNUFX - move usb leds to P2812HNU-F1
The P2812HNU-F3 doesn't have usb leds. Only the P2812HNU-F1 has those
leds.

Reported-by: Sylwester Petela <sscapi@gmail.com>
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48043
2016-01-01 21:18:59 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
ebc71a4d16 lantiq: use dsl led defined in DTS
dsl_control (dsl_notify.sh) is the only process which is aware of the
state of the atm/ptm interface. Use the dsl led exclusive for the dsl
line state.

On boards which don't have a distinct internet and a dsl led, let the
netdev status of the atm interface trigger the shared led.

Triggering the shared led according to the status of the ppp interface
isn't suitable, since the led would be switched of if the ppp
connection goes down, but the line is still in sync.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48040
2016-01-01 21:18:38 +00:00
John Crispin
a3c3b2a9a8 lantiq: use power leds defined in DTS
Use the power leds defined in the dts file instead of hardcoded led names.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48039
2016-01-01 21:18:30 +00:00
John Crispin
d7a5d66ea1 lantiq: use default leds defined in DTS
Remove all now double defined leds from the led board file. Use pppoe
as default for all broadband connections, since it's the default in
OpenWrt now.

Rename the the wifi leds to make sure, the not applicable default
values get overwritten.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48038
2016-01-01 21:18:21 +00:00
John Crispin
a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00
John Crispin
5b6f0250f6 lantiq: ARV752DPW - fix dts file
Use the same led logic and labels as the OEM firmware (red = okay,
blue = failure).

Add the red internet led.

Remove missing usb led workaround. The workaround shouldn't be in the
default configuration.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48036
2016-01-01 21:18:00 +00:00
John Crispin
aa99acdb46 lantiq: ARV752DPW22 - fix dts file
No need to switch (and keep) on all leds at boot. Use the same led
logic and labels as the OEM firmware (red = okay, blue = failure).

Add the red internet led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48035
2016-01-01 21:17:55 +00:00
John Crispin
2eead1c891 lantiq: DGN1000B - fix typo in dts file
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48034
2016-01-01 21:17:50 +00:00
John Crispin
e557011041 lantiq: ARV4518PWR01* move redundant parts to dtsi
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48033
2016-01-01 21:17:42 +00:00
John Crispin
b6b128f63d lantiq: BTHOMEHUBV2B - remove missing usb led workaround
The workaround shouldn't be in the default configuration.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48032
2016-01-01 21:17:34 +00:00
John Crispin
56fa6d8241 lantiq: P2812HNUFX - move leds to dtsi
Beside the used labels, they are the same on both boards.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48031
2016-01-01 21:17:26 +00:00
John Crispin
6b95386fd3 ralink: fix rt3050/5350 ethernet switch support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48030
2016-01-01 21:17:21 +00:00
Felix Fietkau
c55d8d4253 ramips: set the wifi mac address to the same as LAN on witi
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48029
2016-01-01 18:58:02 +00:00
Felix Fietkau
eaf8889cf8 ramips: add a script to fix up the broken mac address on the witi board
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48027
2016-01-01 18:57:39 +00:00
Felix Fietkau
46519964ff kernel: fold of_get_mac_address_mtd into of_get_mac_address
This makes it easier to keep drivers in sync with upstream

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48026
2016-01-01 18:57:29 +00:00
Felix Fietkau
22693a9086 ramips: fix kernel configuration for mt7628
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48025
2016-01-01 15:20:38 +00:00
Felix Fietkau
f3bbb73a20 ramips: add missing clk_round_rate function to fix buildbot errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48024
2016-01-01 14:33:09 +00:00
Felix Fietkau
28ec4e0e71 ramips: fix inverted LEDs for RE6500
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48022
2016-01-01 12:27:45 +00:00
Felix Fietkau
2c4faaed74 ramips: add mac address assignment for eth0 on RE6500
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48021
2016-01-01 12:26:38 +00:00
Felix Fietkau
d65eda48b7 ramips: fix firmware partition size
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48020
2016-01-01 12:26:30 +00:00
Felix Fietkau
11c697015f ramips: fix memory size for RE6500
Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>

SVN-Revision: 48019
2016-01-01 12:26:26 +00:00