Commit graph

881 commits

Author SHA1 Message Date
Jonas Gorski
8ff23c60e2 brcm63xx: remove gpio base workaround
Now that all gpio users without named gpios use DT, we do not need
to fix the gpio controller bases anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44567
2015-02-27 17:40:09 +00:00
Jonas Gorski
b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00
Jonas Gorski
eea227c60d brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.

Use aliases for base calculation until we converted all users to
device tree or named gpios.

Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.

While at it, remove the duplicate reset gpio defintion for livebox.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44565
2015-02-27 17:39:49 +00:00
Jonas Gorski
1efb7398e1 brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44564
2015-02-27 17:39:29 +00:00
Jonas Gorski
90c15beee6 brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44563
2015-02-27 17:39:21 +00:00
Jonas Gorski
5a9b7c28c3 brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44562
2015-02-27 17:39:13 +00:00
Jonas Gorski
9a65e1a570 brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44561
2015-02-27 17:39:07 +00:00
Jonas Gorski
69b327247c brcm63xx: image: move image argument to front in *DTB calls
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44560
2015-02-27 17:38:51 +00:00
Jonas Gorski
f3c071b376 brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44559
2015-02-27 17:38:46 +00:00
Jonas Gorski
dd7625ef15 brcm63xx: allow lzma to use 32MB RAM
Most 16 MiB RAM devices don't even load elf kernels, so it's safe to
assume we have at least 32 MB RAM. This fixes tftp booting with the
default package set as this already produces an uncompressed
kernel > 8 MiB.

New limit is 8 MiB compressed / 24 MiB compressed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44558
2015-02-27 17:38:28 +00:00
Jonas Gorski
92eb27f56d package: mtd: move bcm963xx_tag definition into source code
Remove the need for the header file to be exported - we don't need most
of it anyway; all we care about are the offset of the rootfs length and
header crc fields.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44557
2015-02-27 17:38:25 +00:00
Jonas Gorski
bb54859543 brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.

We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44556
2015-02-27 17:38:14 +00:00
Jonas Gorski
d4652e817a brcm63xx: drop call to prepare_generic_squashfs
We do not use the result, so no need to call it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44555
2015-02-27 17:38:09 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Jonas Gorski
bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
2014-12-08 16:11:52 +00:00
Jonas Gorski
ed7d8a0450 brcm63xx: alphabetically order image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43577
2014-12-08 16:11:32 +00:00
Jonas Gorski
bc4dd8e119 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43576
2014-12-08 16:11:26 +00:00
Jonas Gorski
3fa17f6d58 brcm63xx: add DT support for USR9108
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43575
2014-12-08 16:11:08 +00:00
Jonas Gorski
218582e8ea brcm63xx: add DT support for F5D7633
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43574
2014-12-08 16:11:03 +00:00
Jonas Gorski
d5f1dd9079 brcm63xx: add DT support for DG834GT/PN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43573
2014-12-08 16:10:54 +00:00
Jonas Gorski
b0ae41f849 brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
Jonas Gorski
84200cf189 brcm63xx: add DT support for DSL-2640B
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43571
2014-12-08 16:10:41 +00:00
Jonas Gorski
929ade0648 brcm63xx: add DT support for CPVA642
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43570
2014-12-08 16:10:17 +00:00
Jonas Gorski
387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00
Jonas Gorski
e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
2014-12-01 00:52:07 +00:00
Jonas Gorski
443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
2014-12-01 00:51:56 +00:00
Jonas Gorski
d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
2014-12-01 00:51:53 +00:00
Jonas Gorski
ef4f69adc0 brcm63xx: convert to irq domain
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43454
2014-12-01 00:51:51 +00:00
Jonas Gorski
bb312899f6 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43453
2014-12-01 00:51:24 +00:00
Jonas Gorski
2b46097364 brcm63xx: add DT support for DSL-2650U
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43452
2014-12-01 00:51:17 +00:00
Jonas Gorski
61637aea1b brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43451
2014-12-01 00:51:12 +00:00
Jonas Gorski
53214ca548 brcm63xx: Add DT support for F@ST2504n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43450
2014-12-01 00:51:08 +00:00
Jonas Gorski
40350a5daf brcm63xx: add DT support for F@ST2704V2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43449
2014-12-01 00:51:04 +00:00
Jonas Gorski
3872151ce0 brcm63xx: add DT support for F@ST2604
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43448
2014-12-01 00:50:59 +00:00
Jonas Gorski
5f726ccd79 brcm63xx: add DT support for F@ST2404
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43447
2014-12-01 00:50:56 +00:00
Jonas Gorski
1041e3be6e brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section
The cpu port is at 8, not 5.

Fixes #18406.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43379
2014-11-25 19:07:02 +00:00
Jonas Gorski
93e5c701cc brcm63xx: unify dt image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43378
2014-11-25 19:06:51 +00:00
Jonas Gorski
5e111b0330 brcm63xx: move rsa signature to additional options
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43377
2014-11-25 19:06:43 +00:00
Jonas Gorski
e1eec53136 brcm63xx: fix image generation
This fixes build issues introduced on r43361.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43376
2014-11-25 19:06:38 +00:00
Jonas Gorski
cf0c966d9a brcm63xx: do not build images for unsupported routers
If there is no board support in the kernel, it does not make sense to
build images for devices. So drop any images for board ids for which
there are nc corresponding board_info structs in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43364
2014-11-24 14:44:46 +00:00
Jonas Gorski
fb2a44df50 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43363
2014-11-24 14:44:40 +00:00
Jonas Gorski
c6fc6b42e1 brcm63xx: Add DT support for SPW303V
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43362
2014-11-24 14:44:33 +00:00
Jonas Gorski
5540ca300e brcm63xx: Add DT support for DV-201AMR
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43361
2014-11-24 14:44:28 +00:00
Jonas Gorski
89000dea4c brcm63xx: Add DT support for RG100A
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43360
2014-11-24 14:44:23 +00:00
Jonas Gorski
13d6fa0081 brcm63xx: Add DT support for A226G/M
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43359
2014-11-24 14:44:19 +00:00
Jonas Gorski
b3ce1c4ea6 brcm63xx: Add DT support for AGPF-S0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43358
2014-11-24 14:44:12 +00:00
Jonas Gorski
2bab3e2796 brcm63xx: move board compatible strings into a table
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
2014-11-22 12:25:52 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00