Commit graph

89 commits

Author SHA1 Message Date
Gabor Juhos
8cff770eb3 ramips: introduce ramips_soc_prom_init and move SoC detection into that
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
Gabor Juhos
4e15457e0e ramips: allow to use DSP ASE on RT3xxx
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
Gabor Juhos
0e486d2fd2 ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
Gabor Juhos
44c8b396f9 ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
Gabor Juhos
3489515a7e ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
Gabor Juhos
fc967295ec ramips: rt3883: remove a stray character from rt3883.h
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
Gabor Juhos
b4af07d5c0 ramips: rt288x: don't register the PCI controller on each board
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
Gabor Juhos
32b9e8c750 ramips: use gpio-keys-polled instead of gpio-buttons
SVN-Revision: 30461
2012-02-11 19:37:06 +00:00
Gabor Juhos
9cde29f1a7 ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 30434
2012-02-11 15:11:36 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
Gabor Juhos
d50494f3bb ramips: sort RAMIPS_MACH_* defines
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
Gabor Juhos
1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos
437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
Gabor Juhos
57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
Gabor Juhos
3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
Gabor Juhos
857c1028ac ramips: rt305x: change machine id for DIR-300
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
Gabor Juhos
9ef4785364 ramips: define GPIO chips separately for each SoCs
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
Gabor Juhos
37d6d88869 ramips: move GPIO definitions into a separate header file
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
Gabor Juhos
23518bb2e4 ramips: initial board support for Aztech HW550-3G
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
Gabor Juhos
2b50cecea6 ramips: add watchdog device for RT288x
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
Gabor Juhos
42e36cf732 ramips: add watchdog device for RT305x
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
Gabor Juhos
f38367fcb4 ramips: implement clock API for RT288x
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
Gabor Juhos
b0ffa70248 ramips: implement clock API for RT305X
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
Gabor Juhos
f9e74383a9 ramips: remove extern and __init from function prototypes
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
Gabor Juhos
3b9a6adc7d ramips: ramips_esw: convert it to be a platform driver
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
Gabor Juhos
21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
Gabor Juhos
0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
John Crispin
971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
2010-05-31 11:57:32 +00:00