ramips: add support for Argus ATP-52B

[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
This commit is contained in:
Gabor Juhos 2011-08-15 14:11:45 +00:00
parent 1ebcf03789
commit a3c7e71ae1
8 changed files with 140 additions and 0 deletions

View file

@ -41,6 +41,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "devconf" 0 272
;;
argus-atp52b | \
f5d8235v2 | \
fonera20n | \
hw550-3g | \

View file

@ -10,6 +10,9 @@ ramips_board_name() {
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
case "$machine" in
*"Argus ATP-52B")
name="argus-atp52b"
;;
*"Aztech HW550-3G")
name="hw550-3g"
;;

View file

@ -25,6 +25,7 @@ enum ramips_mach_type {
RAMIPS_MACH_NW718, /* Netcore NW718 */
/* RT3052 based machines */
RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */

View file

@ -2,6 +2,12 @@ if RALINK_RT305X
menu "Ralink RT350x machine selection"
config RT305X_MACH_ARGUS_ATP52B
bool "Argus ATP-52B support"
default y
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_RT_G32_REVB
bool "Asus RT-G32 revB board support"
default y

View file

@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o

View file

@ -0,0 +1,114 @@
/*
* Argus ATP-52B router support
* http://www.argus-co.com/english/productsview.php?id=70&cid=81
*
* Copyright (C) 2011 Roman Yeryomin <roman@advem.lv>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define ARGUS_ATP52B_GPIO_LED_RUN 9
#define ARGUS_ATP52B_GPIO_LED_NET 13
#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0
#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10
#define ARGUS_ATP52B_BUTTONS_POLL_INTERVAL 20
static struct gpio_led argus_atp52b_leds_gpio[] __initdata = {
{
.name = "argus_atp52b:green:run",
.gpio = ARGUS_ATP52B_GPIO_LED_RUN,
.active_low = 1,
},
{
.name = "argus_atp52b:amber:net",
.gpio = ARGUS_ATP52B_GPIO_LED_NET,
.active_low = 1,
}
};
static struct gpio_button argus_atp52b_gpio_buttons[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS,
.active_low = 1,
},
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 10,
.gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET,
.active_low = 1,
}
};
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition argus_atp52b_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "config",
.offset = 0x030000,
.size = 0x010000,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x010000,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x120000,
}, {
.name = "rootfs",
.offset = 0x170000,
.size = 0x680000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data argus_atp52b_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(argus_atp52b_partitions),
.parts = argus_atp52b_partitions,
#endif
};
static void __init argus_atp52b_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0, &argus_atp52b_flash_data);
ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio),
argus_atp52b_leds_gpio);
ramips_register_gpio_buttons(-1, ARGUS_ATP52B_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(argus_atp52b_gpio_buttons),
argus_atp52b_gpio_buttons);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B",
argus_atp52b_init);

View file

@ -199,6 +199,18 @@ define Image/Build/Profile/WCR150GN
endef
mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
mtd_argus_atp52b_kernel_part_size=1179648
mtd_argus_atp52b_rootfs_part_size=6815744
define Image/Build/Template/ARGUS_ATP52B
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
endef
define Image/Build/Profile/ARGUS_ATP52B
$(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
endef
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
mtd_f5d8235_kernel_part_size=1572864
mtd_f5d8235_rootfs_part_size=6356992
@ -213,6 +225,7 @@ endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))

View file

@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y