KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
25232 commits 3 branches 0 tags 154 MiB
Commit graph

10818 commits

Author SHA1 Message Date
John Crispin
dc7164d4ef ramips: DIR-610-A1 Support 
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
 2013-08-14 19:35:27 +00:00
John Crispin
97a7daa72f ramips: fix typo in network uci_defaults script 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37784
 2013-08-14 19:08:55 +00:00
John Crispin
41f62983d3 ramips: dts file cleanup 
cleanup some inconsistencies in the dts files

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37783
 2013-08-14 19:08:44 +00:00
John Crispin
eb7669fc5d ar71xx: fix TL-WR710N board detection 
Fix for recognize TL-WR710N

http://patchwork.openwrt.org/patch/3946/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37782
 2013-08-14 18:15:58 +00:00
John Crispin
6d7d09a126 ar71xx: Fix factory image for DIR 505 A1 
Based on the original firmware, the file must have the tag
HORNET-PACKET-DIR505A1-3, not HORNET-RT-DIR505A1-3.

http://patchwork.openwrt.org/patch/3945/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37781
 2013-08-14 18:15:49 +00:00
John Crispin
36e3424fa5 ramips: add support for dir810l and asus rp-n53 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37780
 2013-08-14 18:15:35 +00:00
John Crispin
632a3e3a79 ramips: various updates to the mt7620 dtsi file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37779
 2013-08-14 18:15:26 +00:00
John Crispin
9e5b0cc19c ramips: update v3.10 patches 
Sync the patches with those sent upstream for v3.12.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37778
 2013-08-14 18:15:15 +00:00
Felix Fietkau
8b8875b305 ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel recognize modules as GPL-compatible 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37769
 2013-08-14 08:52:19 +00:00
Felix Fietkau
bbd4d4c8b8 ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37765
 2013-08-13 10:35:10 +00:00
Felix Fietkau
3ead1e058c kernel: add patch to inline mips dma mapping functions - reduces code size and improves performance 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37763
 2013-08-12 17:26:08 +00:00
Felix Fietkau
58e049ea80 ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint 
256 entries is a bit excessive, even for gigabit speeds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37762
 2013-08-12 17:26:03 +00:00
Felix Fietkau
f43b4ea962 ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion 
Improves ethernet performance, especially during bridging

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37761
 2013-08-12 17:26:00 +00:00
Felix Fietkau
e5fd991c6c rtl8367: add support for configuring the VLAN FID 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37760
 2013-08-12 17:25:25 +00:00
Felix Fietkau
53c3b2a193 ar71xx: fix typo 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37759
 2013-08-12 12:41:53 +00:00
Felix Fietkau
f18fd5512e ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37758
 2013-08-12 11:44:35 +00:00
Felix Fietkau
81cfb9e5ed ar71xx: ethernet: do not update the unused dev->last_rx field 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37757
 2013-08-12 11:44:31 +00:00
Felix Fietkau
104ff48e25 ar71xx: add missing return statement in ethernet mtu change op 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37756
 2013-08-12 11:44:28 +00:00
Luka Perkov
acb9bc0f5e kernel: remove imx-sdma-fw because of license issues 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37755
 2013-08-12 10:48:05 +00:00
Luka Perkov
3258334e79 imx6: use kmod-imx-sdma-fw-imx6 by default 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37754
 2013-08-11 15:10:44 +00:00
Luka Perkov
5337af031e imx6: fix sdma 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37752
 2013-08-11 15:10:38 +00:00
Felix Fietkau
09f4018b2e x86: Fix CONFIG_X86_GRUB_SERIAL="" 
With

    .config:CONFIG_X86_GRUB_SERIAL=""

which (AFAICT) is the way to tell GRUB not to use a serial console, in

    target/linux/x86/image/Makefile:ifneq ($(CONFIG_X86_GRUB_SERIAL),)

$(CONFIG_X86_GRUB_SERIAL) expands to `""' (a literal double double-quote),
making the condition unconditionally false.

This patch fixes the situation by passing CONFIG_X86_GRUB_SERIAL through
qstrip before testing.

Signed-off-by: Tamas TEVESZ <ice@extreme.hu>

SVN-Revision: 37749
 2013-08-10 18:35:29 +00:00
Felix Fietkau
7b05fe59a4 ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37748
 2013-08-10 15:31:38 +00:00
Florian Fainelli
007bd290ea mcs814x: enable POSIX file locking 
opkg (and possible other tools) are currently broken as it requires
file locking support enabled in the kernel.
Without this results in a message like:

root@OpenWrt:/etc/config# opkg update
Collected errors:
 * opkg_conf_load: Could not lock /var/lock/opkg.lock: Permission denied.

With this patch opkg is fully functional on this platform.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37745
 2013-08-09 20:45:17 +00:00
John Crispin
94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
 2013-08-06 16:25:45 +00:00
John Crispin
f835cb6cc4 ar71xx: remove duplicate dir505 entry from board detection code 
https://dev.openwrt.org/ticket/14006

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37723
 2013-08-06 14:12:02 +00:00
John Crispin
d13cbb04ad lantiq: add support for tplink images to .../image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
 2013-08-06 12:31:25 +00:00
John Crispin
5001afdc37 lantiq: make the split patch recognize the tplink header 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
 2013-08-06 12:31:20 +00:00
John Crispin
7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
 2013-08-06 12:31:16 +00:00
John Crispin
e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
 2013-08-06 12:31:10 +00:00
Luka Perkov
27fa640548 lantiq: add (incomplete) support for Aztech GR7000 
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
 2013-08-06 10:17:16 +00:00
Florian Fainelli
d1914b4939 kernel: add some missing config symbols 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37710
 2013-08-05 20:58:05 +00:00
Hauke Mehrtens
9d4145efe5 kernel: fix DMA error when BCM4331 is connected to BCM4706 
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37709
 2013-08-05 16:17:05 +00:00
Gabor Juhos
9257d556c2 ramips: re-implement PCI mux 
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37708
 2013-08-05 12:49:19 +00:00
Gabor Juhos
c80dd34924 ramips: allow to build Seama firmware images with arbitrary size 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37707
 2013-08-05 12:35:22 +00:00
John Crispin
267810f73a ar71xx: add usb modules to dir 505 profile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37706
 2013-08-05 11:08:30 +00:00
John Crispin
c83e665a2c octeon: add a few missing symbols to the kernel config file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37705
 2013-08-05 10:42:09 +00:00
John Crispin
288adb6634 lantiq: several a803 related fixes 
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
 2013-08-05 10:42:00 +00:00
John Crispin
553a469728 ar71xx: add support for dir 505 a1 
this patch is based on ...

-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37703
 2013-08-05 10:41:48 +00:00
Gabor Juhos
99a12119ca ar71xx: fix tl-wa901nd buttons code 
This patch fixes the code of the buttons for TP-Link WA901ND.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37696
 2013-08-05 09:09:39 +00:00
Gabor Juhos
ccec78beaa ar71xx: ubnt unifi outdoor register gpio button 
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37695
 2013-08-05 09:09:37 +00:00
John Crispin
f0b5e7d419 x86: change /dev/console to tty to fix job control 
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).

This patch switches /dev/console to tty devices for ash on x86 generic target.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 37693
 2013-08-04 17:05:33 +00:00
Luka Perkov
f5b9555cdc imx6: sync usb chipidea with upstream 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37686
 2013-08-04 14:20:15 +00:00
John Crispin
db083a41cf generic: make the module reloc pacth work on mips64 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37685
 2013-08-04 13:54:42 +00:00
John Crispin
3a2040ffee octeon: add support for the octeon mips64 SoC 
This is the SoC used be the ESR Lite made by ubnt.com

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37684
 2013-08-04 13:54:32 +00:00
Luka Perkov
8a4726bca8 imx6: remove sdma binary 
SVN-Revision: 37682
 2013-08-04 13:28:26 +00:00
Hauke Mehrtens
2fcaba306e brcm47xx: change board detection for some Asus devices 
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37680
 2013-08-04 12:36:13 +00:00
Hauke Mehrtens
cccc9e214b kernel: do not build FW_LOADER as a module. 
CONFIG_FW_LOADER=y is set in the generic config and our packages in
packages/kernel/linux are depending on it to be compiled into the
kernel.
This fixes some dependency problem where kmod-r8169 misses
firmware_class.ko.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37672
 2013-08-04 09:41:10 +00:00
Zoltan Herpai
36cc8cc856 imx23: add missing DTS config for lradc 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37663
 2013-08-03 10:37:25 +00:00
Zoltan Herpai
370ad94576 imx23: add hw crypto (dcp) support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37662
 2013-08-03 10:35:18 +00:00
Hauke Mehrtens
b2d2ca4bbd kernel: add missing config options 
SVN-Revision: 37660
 2013-08-02 20:13:54 +00:00
Hauke Mehrtens
219eac1856 kernel: add missing config option 
SVN-Revision: 37657
 2013-08-02 16:51:47 +00:00
Hauke Mehrtens
c47a55dd0d kernel: add missing config option 
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37656
 2013-08-02 16:16:23 +00:00
Jonas Gorski
3e9ad14992 kernel: ocf: add missing kernel dependencies 
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher,
so let it select these through kernel config.

Fixes the following build error:

ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37652
 2013-08-01 23:04:42 +00:00
Hauke Mehrtens
290dade033 brcm47xx: switch to kernel 3.10.4 
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37650
 2013-08-01 21:01:59 +00:00
Hauke Mehrtens
7e14fd55fd brcm47xx: use lib phy when tg3 is in use 
This is untested, but probably needed to make it work with the phy lib switch driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37649
 2013-08-01 20:47:55 +00:00
Hauke Mehrtens
8966b86067 kernel: b53: use devm_gpio_request_one() to request gpio 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37648
 2013-08-01 20:46:56 +00:00
Hauke Mehrtens
2b55968f5d brcm47xx: improve detection of Linksys WRTSL54GS 
This closes #13319

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37647
 2013-08-01 19:33:59 +00:00
Hauke Mehrtens
6d7f796b52 brcm47xx: remove support for kernel 3.9 
This is not needed any more.

SVN-Revision: 37646
 2013-08-01 19:17:51 +00:00
Hauke Mehrtens
e1127aca07 kernel: b53: add support for GPIO reset 
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37645
 2013-08-01 19:05:34 +00:00
Hauke Mehrtens
2363cb3893 brcm47xx: add function to get a gpio pin by name 
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37644
 2013-08-01 19:04:12 +00:00
John Crispin
169e184521 ramips: add Poray IP2202 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37640
 2013-08-01 14:31:15 +00:00
John Crispin
ce4228b417 ramips: add Poray X8 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37639
 2013-08-01 14:31:09 +00:00
John Crispin
54968110f1 ramips: add Poray X5/X6 Support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638
 2013-08-01 14:31:04 +00:00
John Crispin
0dc3b44b0d ramips: add Poray M4 4M/8M support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
 2013-08-01 14:30:58 +00:00
John Crispin
23d3b705df ramips: add Poray M3 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37636
 2013-08-01 14:30:53 +00:00
John Crispin
aaedf6c8c6 ramips: add basics for Poray devices 
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37635
 2013-08-01 14:30:46 +00:00
John Crispin
b4c722267e lantiq: fix VG3503J ethernet/gphy led support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
 2013-08-01 14:30:40 +00:00
John Crispin
046b282429 ralink: add mt7620a_mt7610e profile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37633
 2013-08-01 14:30:33 +00:00
Zoltan Herpai
9eb3572b7b imx23: add lradc support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37632
 2013-08-01 09:36:37 +00:00
Zoltan Herpai
91e8082e2d kernel: add missing iio config symbols for 3.10 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37631
 2013-08-01 06:58:08 +00:00
Hauke Mehrtens
e2b2e3886b brcm47xx: run mtd fixtrx linux every time 
With this patch it is possible to boot a device with kernel 3.10 a second time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37625
 2013-07-31 17:41:52 +00:00
Zoltan Herpai
0a6e0228d9 imx23: add SoC sound support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37622
 2013-07-31 09:52:46 +00:00
Felix Fietkau
28d03a9983 kernel: update remaning platforms accidentally left out of r37617 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
 2013-07-30 08:00:25 +00:00
Felix Fietkau
8f04792531 kernel: update to linux 3.10.4, refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37617
 2013-07-29 22:42:22 +00:00
John Crispin
336c94c32d lantiq: setup gphy leds on TPlink TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
 2013-07-29 13:10:42 +00:00
John Crispin
c3b5ee96b9 lantiq: add gphy pinmux definitions 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
 2013-07-29 13:10:37 +00:00
John Crispin
61e6be686f lantiq: set sane default for phy leds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
 2013-07-29 13:10:32 +00:00
John Crispin
c2600d13d1 ramips: fix indenting of spi partitions inside dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37609
 2013-07-29 13:10:26 +00:00
Felix Fietkau
99e3616dac kernel: add missing config symbols for 3.10 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37602
 2013-07-29 12:48:57 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
Felix Fietkau
cc26f768e4 kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37598
 2013-07-29 09:38:21 +00:00
Hauke Mehrtens
ad59c4e646 bcm53xx: compile b53 switch driver 
SVN-Revision: 37587
 2013-07-28 22:14:55 +00:00
Hauke Mehrtens
1377916ea7 bcm53xx: update patches 
This reorders the patchs and adds some new ones.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37586
 2013-07-28 22:13:52 +00:00
Hauke Mehrtens
333252e493 bcm53xx: use clocksource patch as it was committed upstream 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37585
 2013-07-28 21:22:50 +00:00
Hauke Mehrtens
3e8c39f239 bcm53xx: add initial bgmac patches 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37584
 2013-07-28 21:20:15 +00:00
Hauke Mehrtens
24628e4ce7 bcm53xx: activate pci and usb in kernel config 
This is not working, just compiling

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37583
 2013-07-28 21:10:42 +00:00
Luka Perkov
d6a23e1ae9 imx6: update default packages 
SVN-Revision: 37582
 2013-07-28 20:34:21 +00:00
Luka Perkov
a08eab3ce8 imx6: add support for EHCI USB 
SVN-Revision: 37581
 2013-07-28 20:34:19 +00:00
Gabor Juhos
65584ed54f ar71xx: add profile and build image for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37577
 2013-07-28 10:23:38 +00:00
Gabor Juhos
41d136f2c8 ar71xx: add user-space support for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37576
 2013-07-28 10:23:37 +00:00
Gabor Juhos
6d8163505e ar71xx: add kernel support for the Netgear WNR612 v2 board 
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37575
 2013-07-28 10:23:36 +00:00
Gabor Juhos
ede1587ed8 ar71xx: add profile and build image for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37574
 2013-07-28 10:23:34 +00:00
Gabor Juhos
5f5257e234 ar71xx: add user-space support for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37573
 2013-07-28 10:23:33 +00:00
Gabor Juhos
c5029c2ebf ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board 
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37572
 2013-07-28 10:23:32 +00:00
Gabor Juhos
af1dd57a37 ar71xx: build image for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37571
 2013-07-28 10:23:31 +00:00
Gabor Juhos
8b6f392b72 ar71xx: add model detection for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37570
 2013-07-28 10:23:29 +00:00
Gabor Juhos
b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config 
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
 2013-07-28 10:23:22 +00:00
John Crispin
8dd30fa775 ramips: add MPR-A1 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
 2013-07-27 09:23:52 +00:00
John Crispin
13b7ab81cf ralink: gpio driver should not set gpio to input when irq is querired 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37567
 2013-07-27 09:23:45 +00:00
John Crispin
eb089abd28 ramips: add back dwc_otg driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37566
 2013-07-27 09:23:40 +00:00
John Crispin
718b47f0b4 ramips: MPR-A2 should use memory auto detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37565
 2013-07-27 09:23:34 +00:00
John Crispin
115c6f85cf ramips: enable usb phy support on rt5350 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
 2013-07-27 09:23:29 +00:00
John Crispin
f4c4ca0b00 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37563
 2013-07-27 09:23:24 +00:00
John Crispin
4176b6fdd3 strict_strtoul is obsolete, use kstrtoul instead 
based on http://patchwork.openwrt.org/patch/3827/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37562
 2013-07-27 09:23:18 +00:00
John Crispin
c4413b6e08 ramips: unbreak asiarf dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37561
 2013-07-26 15:19:19 +00:00
Gabor Juhos
f093cda481 ar71xx: add profile and fixup image generation for the TL-MR10U board 
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.

Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37550
 2013-07-26 07:32:01 +00:00
Gabor Juhos
f4d5ecdb9f ar71xx: add user-space support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37548
 2013-07-26 07:31:59 +00:00
Gabor Juhos
ec7fe3fab7 ar71xx: add kernel support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37547
 2013-07-26 07:31:57 +00:00
Gabor Juhos
e9688455f6 kernel: update 3.10 to 3.10.3 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
 2013-07-26 07:19:58 +00:00
John Crispin
bfe65eaf7a lantiq: remove stale phy register setup properties from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
 2013-07-25 20:54:51 +00:00
John Crispin
54b4074074 lantiq: add TP-Link TDW8970 image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
 2013-07-25 20:29:24 +00:00
John Crispin
a2c5540727 lantiq: add profile for TP-Link TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
 2013-07-25 20:29:20 +00:00
John Crispin
a99042c6a4 lantiq: add devicetree for TP-Link TDW8970 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
 2013-07-25 20:29:15 +00:00
John Crispin
313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
 2013-07-25 20:29:10 +00:00
John Crispin
a4d31c0353 lantiq: make macs loadable from mtd partitions 
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
 2013-07-25 20:29:05 +00:00
John Crispin
32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
 2013-07-25 20:29:01 +00:00
John Crispin
4036be4408 lantiq: update pcie driver 
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
 2013-07-25 20:28:56 +00:00
Lars-Peter Clausen
dee22d069f xburst: Add missing kernel config symbol 
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37534
 2013-07-25 18:39:34 +00:00
John Crispin
04aaf7a03e ramips: disable hg255d 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37532
 2013-07-25 17:03:08 +00:00
John Crispin
7feebeb193 ramipe: disable HG255D support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37531
 2013-07-25 16:55:48 +00:00
John Crispin
9b2c7be0c4 ramips: important patch for HG255D 
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!

This patch shrink firmware part in mtd layout to exclude origin factory part, and  I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37530
 2013-07-25 16:01:58 +00:00
John Crispin
3ad136d9e3 ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. 
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

SVN-Revision: 37521
 2013-07-24 08:54:41 +00:00
John Crispin
3f3cac6136 ramips: fix HG255D VLAN initial detect issue 
Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37517
 2013-07-23 13:07:00 +00:00
John Crispin
9181c569c4 linux/atheros: add 3.10 kernel support 
SVN-Revision: 37513
 2013-07-22 19:10:59 +00:00
Lars-Peter Clausen
db32da6b16 xburst: Unmark broken 
3.10 support is working fine for this platform, so unmark it broken.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37512
 2013-07-22 18:44:05 +00:00
Lars-Peter Clausen
44745f714e xburst: Remove 3.8 support 
3.8 support for this platform is broken, so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37511
 2013-07-22 18:42:36 +00:00
Lars-Peter Clausen
32a83db347 xburst: Add 3.10 support 
Missing files from the previous commit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37510
 2013-07-22 18:41:23 +00:00
Lars-Peter Clausen
e7d77883c7 xburst: Add 3.10 support 
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37509
 2013-07-22 18:40:32 +00:00
Gabor Juhos
ea55883a51 ar71xx: fix switch port map for the Archer C7 
The correct port number for the WAN port is 1.
Update the VLAN port maps to reflect that.

https://forum.openwrt.org/viewtopic.php?pid=203755#p203755

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37507
 2013-07-22 16:02:13 +00:00
Gabor Juhos
bc91bec9f6 kernel/3.10: rework MIPS FPU emulation disable patch 
Get rid of some ifdefs, and make sure that the microMIPS
specific code is disabled as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37506
 2013-07-22 16:02:12 +00:00
John Crispin
0cc1e2acb4 ramips: Add support for Huawei HG255D in trunk 
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37505
 2013-07-22 15:36:39 +00:00
Gabor Juhos
ef944dcb85 kernel: update 3.10 to 3.10.2 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
 2013-07-22 15:31:13 +00:00
Gabor Juhos
6a5b4ec7dc kernel: update 3.9 to 3.9.11 
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
 2013-07-22 15:30:56 +00:00
John Crispin
8d0cd50f30 ralink: set remove dwc_otg from default packages and use dwc2 instead 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37499
 2013-07-22 13:52:52 +00:00
John Crispin
ffe389c4c5 ralink: remove dwc_otg from modules.mk 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37498
 2013-07-22 13:52:44 +00:00
John Crispin
5525b2136e ralink: set v3.10 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37497
 2013-07-22 13:52:32 +00:00
Felix Fietkau
a50c18c632 kernel: fix crash in act_connmark in 3.9 and 3.10 (fixes #13916, #13876) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37493
 2013-07-21 13:53:54 +00:00
Hauke Mehrtens
a1ec175d7b kernel: add missing config option CONFIG_SND_MXS_SOC 
This is needed by imx23 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37492
 2013-07-21 12:27:22 +00:00
Felix Fietkau
94439c2b5d kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37491
 2013-07-21 11:55:30 +00:00
Lars-Peter Clausen
8fc44d1f5f kernel: Remove gpio-pwm patches 
There is no platform using the gpio-pwm driver, yet these patches break the
generic PWM framework that is in upstream. So just remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37490
 2013-07-21 11:43:16 +00:00
Felix Fietkau
bb141e06a2 kernel: merge a proposed fix from LKML for fixing infinite data returned by /proc/timer_list 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37484
 2013-07-20 18:35:54 +00:00
Jonas Gorski
7ef37c8e3e brcm63xx: add linux 3.10 support 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37481
 2013-07-20 11:30:26 +00:00
Gabor Juhos
205f7248ae Revert "ar71xx: override cpu_has_mmips feature" 
This reverts r37477. A generic patch is used to fix
this globally, so revert the ar71xx specific change.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37480
 2013-07-20 10:14:08 +00:00
Gabor Juhos
a2d12049e0 kernel/3.10: add a generic patch for cpu_has_mmips override 
Backport of commit 3ddc14add5e6341cf8ef4058c34c67ba7fd15317
from 3.11-rc1

Suggested-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37479
 2013-07-20 10:14:05 +00:00
Gabor Juhos
f5f9bce168 kernel/3.10: make emulate_load_store_microMIPS static 
This allows the compiler to remove the emulate_load_store_microMIPS
function if cpu_has_mmips is defined as zero.

Backport of commit 74338805ec6869594d583535f941cb478c94dd73
from 3.11-rc1.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37478
 2013-07-20 09:53:54 +00:00
Gabor Juhos
2d8fd8b58c ar71xx: override cpu_has_mmips feature 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37477
 2013-07-20 09:40:32 +00:00
Gabor Juhos
8a6575cf53 ar71xx: use mtd_get_part_size helper 
Drop the local get_mtd_part_size implementation and use
the equivalent function provided by lib/functions.sh.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37476
 2013-07-20 09:26:57 +00:00
Gabor Juhos
7ee96847cf mpc85xx: remove 3.8 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37474
 2013-07-20 09:13:04 +00:00
Gabor Juhos
294d7611c8 mpc85xx: switch to 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37473
 2013-07-20 09:13:01 +00:00
Gabor Juhos
5803e27005 mpc85xx: add 3.10 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37472
 2013-07-20 09:12:57 +00:00
Gabor Juhos
4a9d4271d0 ar71xx: build image for the TP-LINK TL-WR941N v6 board 
TL-WR941N v6 use almost same IC as WDR3500.

[juhosg: change subject, and change fw layout from 4M to 4Mlzma]

Patchwork: http://patchwork.openwrt.org/patch/3719/
Signed-off-by: ShuYu Wang <andelf@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37471
 2013-07-20 08:54:45 +00:00
Gabor Juhos
187a69c631 linux: move more ARM_ERRATA symbols to the generic config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37470
 2013-07-20 07:43:54 +00:00
Gabor Juhos
a9de3a851a linux: remove 3.7 support 
It is not used by any target.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37469
 2013-07-20 07:37:27 +00:00
Gabor Juhos
c8933c968f linux: remove duplicated 3.10 symbols from target config files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37467
 2013-07-20 07:21:52 +00:00
Jonas Gorski
b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
 2013-07-19 22:58:01 +00:00
Gabor Juhos
9e14f9df5f malta: remove CONFIG_NET_CLS* overrides 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37464
 2013-07-19 22:51:37 +00:00
Gabor Juhos
f4242a4324 malta: remove CONFIG_NET_SCH_* overrides 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37463
 2013-07-19 22:51:36 +00:00
Gabor Juhos
2dee293d02 malta: remove CONFIG_*_PHY overrides 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37462
 2013-07-19 22:51:35 +00:00
Gabor Juhos
e47a2a24a7 malta: remove 3.8 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37457
 2013-07-19 17:12:53 +00:00
Gabor Juhos
784311eec3 malta: switch to 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37456
 2013-07-19 17:12:52 +00:00
Gabor Juhos
64977a70de malta: add support for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37455
 2013-07-19 17:12:51 +00:00
Gabor Juhos
620f07eed4 malta: update README 
The images which are usable with Qemu have a '-initramfs'
suffix. Update the readme to reflect that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37454
 2013-07-19 17:12:47 +00:00
Gabor Juhos
68d5ce18d0 malta: avoid redundant vmlinux-initramfs.elf copy 
Patchwork: http://patchwork.openwrt.org/patch/3811/
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37453
 2013-07-19 17:12:46 +00:00
Gabor Juhos
0f0f250b66 kernel: add missing symbols for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37450
 2013-07-19 17:12:36 +00:00
Gabor Juhos
8e674fdf1b kernel: refresh config-3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37449
 2013-07-19 17:12:34 +00:00
Hauke Mehrtens
72f73ab041 x86: fix kmod-gpio-pc8736x dependencies 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37447
 2013-07-19 14:55:51 +00:00
Jonas Gorski
29954b9ffc kernel: remove gpio_buttons 
It hasn't been buildable for a long time, and there are no users of it
anymore left as all of them have been switched to the upstream accepted
version.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37436
 2013-07-19 13:20:41 +00:00
Jonas Gorski
960002ed4b x86: switch rdc to to gpio_keys_polled 
gpio_buttons have been deprecated since a long time.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37435
 2013-07-19 13:20:39 +00:00
Jonas Gorski
6db050194e ixp4xx: switch cambira to gpio_keys_polled 
gpio_buttons have been deprecated since a long time.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37434
 2013-07-19 13:20:37 +00:00
Hauke Mehrtens
c7f8cb3f4f kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18 
This should fix some build problems in b43 with kernel 3.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37432
 2013-07-19 12:02:34 +00:00
Jonas Gorski
21412ccb21 kernel: add missing kernel config symbol 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37423
 2013-07-19 09:51:20 +00:00
Felix Fietkau
d2cbc1b6cf imx23: add back the missing imx23 target dependency 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37417
 2013-07-18 17:26:46 +00:00
Zoltan Herpai
8aa106cf43 imx23: ChipIdea changes 
- move ci_hdrc into generic modules
 - add separate package for imx-specific modules

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37384
 2013-07-17 22:49:16 +00:00
John Crispin
8028fb8096 ramips: add sysupgarde support for wl-330n3g 
https://dev.openwrt.org/ticket/13891

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37376
 2013-07-17 09:44:57 +00:00
Luka Perkov
6a985ed219 imx6: add missing patches (r37363) 
SVN-Revision: 37364
 2013-07-15 23:44:26 +00:00
Luka Perkov
af6eb6cc8c imx6: add support for gw5400-a 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37363
 2013-07-15 23:18:39 +00:00
Luka Perkov
6ef9d30da7 imx6: use $PATH to locate dtc binary 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37362
 2013-07-15 23:18:37 +00:00
John Crispin
dd22304691 ramips: make the old dwc driver depend on v3.9 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37357
 2013-07-15 21:06:03 +00:00
John Crispin
072e1a254c ramips: add v3.10 kernel config files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37356
 2013-07-15 21:05:58 +00:00
John Crispin
947abea261 kernel: v3.10 has no GENERIC_GPIO anymore 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37355
 2013-07-15 21:05:53 +00:00
John Crispin
cb6375c20a ramips: fix ehci/ohci OF binding 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37354
 2013-07-15 21:05:47 +00:00
John Crispin
12a099eb07 ramips: update dtsi files to work with dwc2 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37353
 2013-07-15 21:05:42 +00:00
John Crispin
e8ebcffd02 ramips: add a explicit reset to dwc2 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37352
 2013-07-15 21:05:36 +00:00
Felix Fietkau
8b92613b6c ar71xx: fix uimage split for ew-dorin 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37350
 2013-07-15 16:59:58 +00:00
Felix Fietkau
c77eca3108 ar71xx: refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37349
 2013-07-15 15:12:41 +00:00
Felix Fietkau
3197479290 kernel: refresh 3.10 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37348
 2013-07-15 15:12:37 +00:00
Felix Fietkau
a6db996b13 kernel: fix another corner case in the bridge state patch (#13874) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37347
 2013-07-15 15:12:33 +00:00
Felix Fietkau
93cb862260 kernel: fix a bridge issue that broke WDS client handling in 3.9+ 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37341
 2013-07-15 12:25:58 +00:00
Hauke Mehrtens
866e229299 brcm47xx: fix name of patch 
SVN-Revision: 37340
 2013-07-15 11:42:54 +00:00
John Crispin
bd78f2b56e ramips: add a patch to make dwc2 work with boards that have an old bootloader 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37339
 2013-07-15 11:34:13 +00:00
Felix Fietkau
9a9d97b749 bcm63xx: update ralink wlan firmware hotplug script for new eeprom size 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37337
 2013-07-15 11:07:59 +00:00
Felix Fietkau
fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
 2013-07-15 11:06:07 +00:00
Felix Fietkau
93c73cfb14 kernel: fix block2mtd build after removing the device refresh ioctl 
fixes #13882

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37332
 2013-07-15 11:01:48 +00:00
John Crispin
a0de18807b ramips: add ralink v3.10 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37331
 2013-07-15 10:06:55 +00:00
Luka Perkov
75b911ddc1 imx6: switch to askconsole 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37326
 2013-07-15 00:03:40 +00:00
Luka Perkov
9e3eee974b ar71xx: remove patches for 3.8 (leftover after r37315) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37324
 2013-07-14 22:57:47 +00:00
Florian Fainelli
758a411797 realview: switch to 3.10 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37322
 2013-07-14 21:04:36 +00:00
Florian Fainelli
60e92f6e58 realview: add support for 3.10 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37321
 2013-07-14 21:04:15 +00:00
Florian Fainelli
116990441b kernel: add some more ARM related configuration symbols 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37320
 2013-07-14 21:03:53 +00:00