KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
28979 commits 3 branches 0 tags 154 MiB
Commit graph

68 commits

Author SHA1 Message Date
John Crispin
4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2 
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
 2014-10-26 17:18:41 +00:00
John Crispin
0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
 2014-10-14 11:04:25 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition 
SVN-Revision: 42824
 2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus 
SVN-Revision: 42823
 2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else 
SVN-Revision: 42822
 2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp 
SVN-Revision: 42821
 2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts 
SVN-Revision: 42820
 2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts 
SVN-Revision: 42819
 2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board 
SVN-Revision: 42818
 2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling 
SVN-Revision: 42817
 2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up) 
SVN-Revision: 42816
 2014-10-06 20:07:04 +00:00
John Crispin
3dd93e8336 lantiq: move the lantiq,switch property into the interface node 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42574
 2014-09-16 14:53:01 +00:00
John Crispin
e47fbcbf1d lantiq: BTHOMEHUBV2B use bigger mtd partition for kernel 
The bb-rc3 image for the BTHOMEHUBV2B is too big for its
mtd partition. This patch corrects the partition sizes in
the device tree. This patch should really go in before
bb-final, otherwise the BTHOMEHUBV2B images won't be useable.
I do apologise for not spotting this straight away.

Many thanks,

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42316
 2014-08-28 06:27:41 +00:00
John Crispin
b796ff6ef3 lantiq: generate unique ARV7519RW22 firmware 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42183
 2014-08-18 13:09:11 +00:00
John Crispin
5f71dbb005 lantiq: improve ARV7519RW22 support 
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
 2014-08-18 13:08:56 +00:00
John Crispin
c21a20cd78 lantiq: fix dgn3500 and td8970 wifi 
ath9k failed to come up due to a bad mac addr

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41860
 2014-07-28 15:26:41 +00:00
John Crispin
4beb468f11 lantiq: fix board_id/boardname for VGV7519 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
 2014-07-16 11:36:02 +00:00
John Crispin
85cacfd753 lantiq: vgv7519 add missing wps label to dts 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
 2014-07-14 18:43:02 +00:00
John Crispin
85ca75decd lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition and rootfs type 
This patches the BTHOMEHUB2B device tree to make use of the
new code for automatic detection of the ubi partition and the
rootfs type within it. Gets rid of the ugly alternative bootargs
lines.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41214
 2014-06-16 18:54:38 +00:00
John Crispin
e6c46554bb lantiq: fixup vgv7519 usb support 
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
 2014-06-16 18:54:33 +00:00
John Crispin
7ba5188fe9 lantiq: Fix ARV7510PW22 etop 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40920
 2014-06-02 12:43:43 +00:00
John Crispin
d4ec98c2cc lantiq: Fix ARV4518 etop 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40919
 2014-06-02 12:43:35 +00:00
John Crispin
4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi 
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
 2014-04-22 08:08:46 +00:00
John Crispin
c4aae8fbc5 lantiq: ARV7519RW22: several fixes 
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
 2014-04-16 12:01:09 +00:00
John Crispin
9fbbd04f45 lantiq: enable switch on td8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
 2014-04-12 21:22:21 +00:00
John Crispin
60edb8f47b lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40461
 2014-04-11 20:40:34 +00:00
John Crispin
858b972e66 lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware 
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40418
 2014-04-07 15:10:22 +00:00
John Crispin
709cab91d2 lantiq: BT Home Hub 2B support - board support 
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
 2014-04-03 14:26:54 +00:00
John Crispin
78a7ae428f lantiq: make td8970 wifi led work 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40368
 2014-04-03 14:26:46 +00:00
John Crispin
58eccdac4f lantiq: fix vr9 ubi handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
 2014-04-03 14:26:24 +00:00
John Crispin
e36568e74b lntiq: add support for Astoria ARV7519RW. 
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
 2014-03-30 10:02:30 +00:00
John Crispin
5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons 
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
 2014-03-30 09:16:19 +00:00
John Crispin
e733242a23 lantiq: add support for Arcadyan ARV7519PW 
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
 2014-03-30 09:16:15 +00:00
John Crispin
9531390aad lantiq: add support for ZyXEL P2812HNUFX 
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
 2014-03-30 09:16:06 +00:00
John Crispin
93e5c8cefc lantiq: fixup 3370 dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
 2014-03-30 09:15:41 +00:00
Luka Perkov
eddc327c7c lantiq: fix PCI problems on ARV4510PW 
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
 2014-02-15 22:54:32 +00:00
John Crispin
053d596297 lantiq: Add support for Astoria ARV7510PW22 
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
 2014-01-15 19:16:51 +00:00
John Crispin
f58b424c9e lantiq: improve Arcadyan ARV4510PW support 
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
 2014-01-12 12:07:07 +00:00
John Crispin
d823c20f05 lantiq: update default mii modes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
 2013-11-20 16:56:58 +00:00
John Crispin
000cefd85e lantiq: DGN3500 fixups 
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
 2013-11-11 13:15:08 +00:00
John Crispin
5139b2d996 lantiq: rename TDW8970 led adsl->dsl 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38730
 2013-11-11 12:19:26 +00:00
John Crispin
dabdc6911a lantiq: update TDW8970.dts to support buttons properly 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38728
 2013-11-11 12:19:18 +00:00
John Crispin
715b62ebad lantiq: experia v8 fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
 2013-10-07 15:03:00 +00:00
John Crispin
81fb43d2f1 lantiq: fix fritz3370 dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
 2013-10-07 15:02:56 +00:00
John Crispin
4f3797386f lantiq: add support for VGV7519 KPN Experia box v8 
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
 2013-09-30 20:48:46 +00:00
Luka Perkov
7665c57a72 lantiq: fix usb on sx76x 
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38083
 2013-09-20 14:24:30 +00:00
Luka Perkov
43f1a47430 lantiq: add initial support for Siemens GIGASX76X 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
 2013-09-19 00:50:48 +00:00
Luka Perkov
3b33adeb99 lantiq: add support for ZyXEL P2601HNFX 
SVN-Revision: 38049
 2013-09-19 00:50:46 +00:00
Luka Perkov
7d2c5682b9 lantiq: add support for ZTE H201L 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
 2013-09-19 00:50:44 +00:00
John Crispin
40ac8dd9df lantiq: fix FRITZ7320 flash window size 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38042
 2013-09-18 16:31:45 +00:00