lantiq: BT Home Hub 2B support - board support

Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
This commit is contained in:
John Crispin 2014-04-03 14:26:54 +00:00
parent 469b8297fa
commit 709cab91d2
6 changed files with 308 additions and 4 deletions

View file

@ -71,9 +71,9 @@ define toupper
$(shell echo $(1) | tr '[:lower:]' '[:upper:]')
endef
# pad to 4k, 8k, 64k, 128k 256k and add jffs2 end-of-filesystem mark
# pad to 4k, 8k, 16k, 64k, 128k, 256k and add jffs2 end-of-filesystem mark
define prepare_generic_squashfs
$(STAGING_DIR_HOST)/bin/padjffs2 $(1) 4 8 64 128 256
$(STAGING_DIR_HOST)/bin/padjffs2 $(1) 4 8 16 64 128 256
endef
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)

View file

@ -0,0 +1,275 @@
/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=squashfs,jffs2";
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
bank-width = <2>;
reg = <0 0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>; /* 256KB */
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>; /* 64KB */
};
partition@50000 {
label = "rg_conf_1";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "rg_conf_2";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "rg_conf_factory";
reg = <0x70000 0x10000>;
};
};
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
ath9k_cal: partition@0 {
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
reg = <0x00000 0x4000>;
read-only;
};
partition@4000 {
label = "firmware";
reg = <0x4000 0x1FFC000>;
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x0000>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
btn_in {
lantiq,pins = "io2", "io15", "io22";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
};
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
stp0: stp@E100BB0 {
status = "okay";
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 1>;
linux,code = <0x198>;
};
findhandset {
label = "findhandset";
gpios = <&gpio 15 1>;
linux,code = <0x101>;
};
wps {
label = "wps";
gpios = <&gpio 22 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
upgrading-orange {
label = "soc:orange:upgrading";
gpios = <&stp0 5 0>;
};
phone-orange {
label = "soc:orange:phone";
gpios = <&stp0 6 0>;
};
phone-blue {
label = "soc:blue:phone";
gpios = <&stp0 7 0>;
};
wireless-orange {
label = "soc:orange:wireless";
gpios = <&stp0 8 0>;
};
wireless-blue {
label = "soc:blue:wireless";
gpios = <&stp0 9 0>;
};
broadband-red {
label = "soc:red:broadband";
gpios = <&stp0 10 0>;
};
broadband-orange {
label = "soc:orange:broadband";
gpios = <&stp0 11 0>;
};
broadband-blue {
label = "soc:blue:broadband";
gpios = <&stp0 12 0>;
};
power-red {
label = "soc:red:power";
gpios = <&stp0 13 0>;
};
power-orange {
label = "soc:orange:power";
gpios = <&stp0 14 0>;
};
power-blue {
label = "soc:blue:power";
gpios = <&stp0 15 0>;
};
};
};

View file

@ -6,12 +6,13 @@
#
# boards missing since devicetree update
#EASY50712 ARV3527P BTHOMEHUBV2B BTHOMEHUBV2BOPENRG
#EASY50712 ARV3527P
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
JFFS2_BLOCKSIZE = 64k 128k 256k
NAND_BLOCKSIZE = 512:16k
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
@ -133,6 +134,13 @@ define Image/Build/jffs2-256k
cat $(KDIR)/uImage-$(2)-$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
endef
define Image/Build/jffs2-nand-512-16k
dd if=$(KDIR)/uImage-$(2) of=$(KDIR)/uImage-$(2)-$(1) bs=16k conv=sync
$(CP) $(KDIR)/uImage-$(2)-$(1) $(BIN_DIR)/uImage-$(2)-$(1)
$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/root-$(2)-$(1)
cat $(KDIR)/uImage-$(2)-$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
endef
define Image/Build/ubifs
ifneq ($($(PROFILE)_UBIFS_OPTS),)
@ -254,6 +262,9 @@ endif
ifeq ($(CONFIG_TARGET_lantiq_xway),y)
# Danube
Image/BuildKernel/Profile/BTHOMEHUBV2B=$(call Image/BuildKernel/Template,BTHOMEHUBV2B)
Image/Build/Profile/BTHOMEHUBV2B=$(call Image/Build/$(1),$(1),BTHOMEHUBV2B)
Image/BuildKernel/Profile/EASY50712=$(call Image/BuildKernel/Template,EASY50712)
Image/Build/Profile/EASY50712=$(call Image/Build/$(1),$(1),EASY50712)

View file

@ -15,7 +15,13 @@ CONFIG_IRQ_WORK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_XWAY=y
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_NLS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_RCU_STALL_COMMON is not set

View file

@ -0,0 +1,12 @@
define Profile/BTHOMEHUBV2B
NAME:=BT Home Hub 2B
PACKAGES:=kmod-ltq-hcd-danube kmod-ledtrig-usbdev \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-deu-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini \
swconfig
endef
$(eval $(call Profile,BTHOMEHUBV2B))

View file

@ -1,7 +1,7 @@
ARCH:=mips
SUBTARGET:=xway
BOARDNAME:=XWAY
FEATURES:=squashfs atm mips16
FEATURES:=squashfs atm mips16 jffs2_nand
CPU_TYPE:=34kc
CPU_SUBTYPE:=dsp