Commit graph

30714 commits

Author SHA1 Message Date
Jonas Gorski
582dfc52f5 brcm63xx: move CPVA502+ to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44990
2015-03-25 15:35:57 +00:00
Jonas Gorski
46b4d4d1d5 brcm63xx: move dg834g v4 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44989
2015-03-25 15:35:43 +00:00
Jonas Gorski
30a579c674 brcm63xx: move dsl-2640u to dts
Also build image again(?).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44988
2015-03-25 15:35:37 +00:00
Jonas Gorski
16ea19053a brcm63xx: move bcm963268bu_p300 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44987
2015-03-25 15:35:24 +00:00
Jonas Gorski
ad218d3033 brcm63xx: fix compilation on 3.14
Fixes the following issue:

drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44986
2015-03-25 15:35:15 +00:00
Jonas Gorski
2d3371cd0f brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
Jonas Gorski
065d6e9047 brcm63xx: move kernel load address to 8MiB
Fixes boot when uncompressed kernel is > 4 MiB (#19251).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44984
2015-03-25 15:34:59 +00:00
Jonas Gorski
ee0140a678 brcm63xx: hcsimage: respect load address
Respect the vmlinux load address when generating images.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44983
2015-03-25 15:34:45 +00:00
Jonas Gorski
d84fafb9f3 brcm63xx: add Livebox 1 firmware image generation
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the  bcm63xx images
builder makefile to generate the livebox 1 firmware.

I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.

Regards

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
 respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44982
2015-03-25 15:34:40 +00:00
Jonas Gorski
77e3d442b0 brcm63xx: add a dummy image recipe for boards missing proper images
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44981
2015-03-25 15:34:26 +00:00
Jonas Gorski
02d68c2b57 brcm63xx: drop non-dtb image recipe
All images generated contain dtbs, so it is now unused.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44980
2015-03-25 15:34:23 +00:00
Felix Fietkau
ab43a5abd0 image.mk: allow image build code to run a per-filesystem prepare step
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44979
2015-03-25 14:30:53 +00:00
Felix Fietkau
fafa3f57e3 kernel: merge upstream bgmac driver improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44978
2015-03-25 14:30:46 +00:00
Felix Fietkau
68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
Felix Fietkau
2efb6be426 toolchain/glibc: remove broken eglibc 2.15 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44976
2015-03-25 14:29:23 +00:00
Felix Fietkau
6aba44bfe0 toolchain: drop obsolete references to the coldfire target
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44975
2015-03-25 14:29:17 +00:00
Gabor Juhos
621979b49f kernel: yaffs: use new_sync_{read,write} for 3.18+
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:

  root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
  [ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
  [ 2884.120000] yaffs: passed flags ""
  root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
  [ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
    address 00000000, epc == 00000000, ra == 80129414
  [ 2902.710000] Oops[#1]:
  [ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
  [ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
  [ 2902.710000] $ 0   : 00000000 fffffff8 00000000 00000000
  [ 2902.710000] $ 4   : 868c7e70 868c7ea8 00000001 868c7f08
  [ 2902.710000] $ 8   : 00000038 80064f18 80072280 00000000
  [ 2902.710000] $12   : 7fa152b8 7709e3a0 00c42008 7709e3a0
  [ 2902.710000] $16   : 868c7f08 86a46000 00000010 878e7a20
  [ 2902.710000] $20   : 7705c4b0 00000010 00000000 00000000
  [ 2902.710000] $24   : 770960bc 7707dd78
  [ 2902.710000] $28   : 868c6000 868c7e58 7f8e7030 80129414
  [ 2902.710000] Hi    : 00000000
  [ 2902.710000] Lo    : ffffffff
  [ 2902.710000] epc   : 00000000   (null)
  [ 2902.710000]     Not tainted
  [ 2902.710000] ra    : 80129414 do_sync_read+0x7c/0xb4
  [ 2902.710000] Status: 1900dc03 KERNEL EXL IE
  [ 2902.710000] Cause : 00800008
  [ 2902.710000] BadVA : 00000000
  [ 2902.710000] PrId  : 00019750 (MIPS 74Kc)

Change the yaffs code to use the new_sync_{read,write} functions
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 44974
2015-03-25 08:59:12 +00:00
Felix Fietkau
31b0f0be12 iproute2: fix build error with musl (#19302)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44973
2015-03-25 00:11:07 +00:00
Jo-Philipp Wich
f6c581cc3e automake: portability fixes
The rework of the host tools discovery caused automake to embed
absolute paths to staging_dir/host/bin/perl into the shebang
of the generated automake executables.

Switch to the portable "/usr/bin/env perl" and enable global
warnings through "$^W" instead of the "-w" interpreter argument.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44972
2015-03-24 13:13:01 +00:00
Jo-Philipp Wich
e0c8e20f8c autoconf: portability fixes
The rework of the host tools discovery caused autoconf to embed
absolute paths to staging_dir/host/bin/perl into the shebang
of the generated autoconfig executables.

Switch to the portable "/usr/bin/env perl" and enable global
warnings through "$^W" instead of the "-w" interpreter argument.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44971
2015-03-24 13:12:52 +00:00
Rafał Miłecki
8fdd0fb07c kernel: backport rest of bcma patches
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44970
2015-03-24 10:39:10 +00:00
Rafał Miłecki
a7724918c9 kernel: mac80211: backport bcma patch renaming IRQ control function
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44969
2015-03-24 10:38:59 +00:00
Rafał Miłecki
a4d7571367 mark 3.10 targets as broken
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44968
2015-03-24 10:38:50 +00:00
Jo-Philipp Wich
437d710546 lldpd: add option to disable privilege separation
Helpful to disable when debugging lldpd crashes (when working on it).
When privilege separation is on, some crashes are stack-traced to
some privilege separation code.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 44967
2015-03-24 10:13:08 +00:00
Jo-Philipp Wich
02e2548b84 x86: use PARTUUID instead explicitly specifying the device by default
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.

It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.

Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44966
2015-03-24 10:08:12 +00:00
Felix Fietkau
5d9eeab64a build: remove obsolete references to cris and avr32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44965
2015-03-24 10:07:40 +00:00
Felix Fietkau
793a451584 toolchain: remove obsolete references to the cris architecture
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44964
2015-03-24 10:07:31 +00:00
Felix Fietkau
512066dba4 toolchain: remove obsolete checks for avr32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44963
2015-03-24 10:07:25 +00:00
Felix Fietkau
85a3512150 toolchain: remove obsolete !avr32 dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44962
2015-03-24 10:07:13 +00:00
Felix Fietkau
3a52795531 uClibc: remove avr32 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44961
2015-03-24 10:07:07 +00:00
Felix Fietkau
755a90344e binutils: remove version 2.20.1 (only used by avr32)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44960
2015-03-24 10:06:55 +00:00
Jo-Philipp Wich
d830d34b00 x86_64: fix PARTUUID format with leading zeros
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44959
2015-03-24 10:06:40 +00:00
Felix Fietkau
76bf68fa52 binutils: remove defunct binutils default version selection for aarch64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44958
2015-03-24 10:06:38 +00:00
Felix Fietkau
fc2bd07260 gcc: remove 4.4.7 (only used by avr32)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44957
2015-03-24 10:06:27 +00:00
Felix Fietkau
2450985de9 avr32: remove target
It depends on obsolete compilers and only works on one device (an
evaluation board).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44956
2015-03-24 10:06:14 +00:00
Rafał Miłecki
3b6c70b7fc kernel: update bcma with most patches from wireless-drivers-next
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44955
2015-03-24 07:15:31 +00:00
Rafał Miłecki
eb90a6d7d8 kernel: backport fixed_phy_register EXPORT fix from 3.19
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44954
2015-03-23 18:39:16 +00:00
Steven Barth
321ff8d516 mac80211: disable for uml
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 44953
2015-03-23 14:51:56 +00:00
Imre Kaloz
2375f37723 generic/3.18: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44951
2015-03-23 13:28:52 +00:00
Imre Kaloz
a86b430a85 mwlwifi: update to the new revision
Adds client mode support and fixes for Apple devices

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44950
2015-03-23 12:45:19 +00:00
Imre Kaloz
5be4f2b5b8 mvebu: update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44949
2015-03-23 12:44:30 +00:00
Felix Fietkau
59b55e6a94 iwinfo: update to the latest version, fixes 802.11ac capability reporting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44948
2015-03-23 12:31:28 +00:00
Felix Fietkau
0a84da0841 bcm53xx: add missing cache controller errata options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44947
2015-03-23 10:14:27 +00:00
Felix Fietkau
a6f914d573 bcm53xx: remove linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946
2015-03-23 10:14:20 +00:00
John Crispin
752fc0c8d3 libubox: update to latest git HEAD
fix a bug the made uloop_end() not work when called from within a uloop_process
callback handler

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44945
2015-03-22 19:30:04 +00:00
Felix Fietkau
7cacd6bdb6 netifd: fix default initialization of RPS/XPS
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44944
2015-03-22 17:40:39 +00:00
Felix Fietkau
78692595e7 netifd: update to the latest version, adds support for configuring RPS/XPS (enabled by default where available)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44943
2015-03-22 16:42:44 +00:00
Felix Fietkau
889e1e4bff fstools: update to the latest version, makes interrupted first boot more reliable
Use xattr to store the filesystem initialization state of the overlay.
As long as the filesystem is not marked as initialized yet (happens in
/etc/init.d/done), all overlay data (except for sysupgrade.tgz) will be
discarded before the system is allowed to boot

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44942
2015-03-22 15:11:27 +00:00
Felix Fietkau
bc1fc688af base-files: keep sysupgrade.tgz until /etc/init.d/done has been called
This makes interrupted boots after sysupgrade more reliable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44941
2015-03-22 15:11:20 +00:00
Felix Fietkau
e890a3bc9a ramips: make ethernet register map u16 instead of u32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44940
2015-03-22 15:11:14 +00:00