brcm63xx: Add BT Home Hub 2A support.

Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
This commit is contained in:
Jonas Gorski 2015-03-25 15:35:12 +00:00
parent 065d6e9047
commit 2d3371cd0f
8 changed files with 218 additions and 1 deletions

View file

@ -72,6 +72,10 @@ set_state() {
fast2704v2)
status_led="F@ST2704V2:green:power"
;;
homehub2a)
status_led="HOMEHUB2A:green:upgrading"
status_led2="HOMEHUB2A:blue:upgrading"
;;
gw6200)
status_led="GW6200:green:line1"
status_led2="GW6200:green:tel"

View file

@ -34,6 +34,12 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
homehub2a)
ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
;;
esac
ucidef_commit_leds

View file

@ -66,7 +66,8 @@ v2500v_bb)
dsl-274xb-c |\
hg553 |\
hg556a_*)
hg556a_* |\
homehub2a)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"

View file

@ -60,6 +60,9 @@ brcm63xx_dt_detect() {
"Broadcom BCM96368MVWG reference board")
board_name="bcm96368mvwg"
;;
"BT Home Hub 2.0 Type A")
board_name="homehub2a"
;;
"BT Voyager V2500V")
board_name="v2500v"
;;

View file

@ -0,0 +1,140 @@
/dts-v1/;
/include/ "bcm6358.dtsi"
/ {
model = "BT Home Hub 2.0 Type A";
compatible = "thomson,homehub2a", "brcm,bcm6358";
spi-gpio {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-gpio";
gpio-mosi = <&gpio0 7 0>;
gpio-sck = <&gpio0 6 0>;
cs-gpios = <&gpio0 5 0>;
num-chipselects = <1>;
hc595: gpio-spi-controller@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <2>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
phone {
label = "phone";
gpios = <&gpio0 1 1>;
linux,code = <169>;
};
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 11 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_red {
label = "HOMEHUB2A:red:power";
gpios = <&hc595 0 1>;
};
power_green {
label = "HOMEHUB2A:green:power";
gpios = <&hc595 1 1>;
default-state = "on";
};
power_blue {
label = "HOMEHUB2A:blue:power";
gpios = <&hc595 2 1>;
};
broadband_red {
label = "HOMEHUB2A:red:broadband";
gpios = <&hc595 3 1>;
};
broadband_green {
label = "HOMEHUB2A:green:broadband";
gpios = <&hc595 4 1>;
};
broadband_blue {
label = "HOMEHUB2A:blue:broadband";
gpios = <&hc595 5 1>;
};
wireless_red {
label = "HOMEHUB2A:red:wireless";
gpios = <&hc595 6 1>;
};
wireless_green {
label = "HOMEHUB2A:green:wireless";
gpios = <&hc595 7 1>;
};
wireless_blue {
label = "HOMEHUB2A:blue:wireless";
gpios = <&hc595 8 1>;
};
phone_red {
label = "HOMEHUB2A:red:phone";
gpios = <&hc595 9 1>;
};
phone_green {
label = "HOMEHUB2A:green:phone";
gpios = <&hc595 10 1>;
};
phone_blue {
label = "HOMEHUB2A:blue:phone";
gpios = <&hc595 11 1>;
};
upgrading_red {
label = "HOMEHUB2A:red:upgrading";
gpios = <&hc595 12 1>;
};
upgrading_green {
label = "HOMEHUB2A:green:upgrading";
gpios = <&hc595 13 1>;
};
upgrading_blue {
label = "HOMEHUB2A:blue:upgrading";
gpios = <&hc595 14 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xfc0000>;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};

View file

@ -275,6 +275,8 @@ $(eval $(call ImageDTB,CFEDTB,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x
$(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348))
# Belkin F5D7633
$(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000))
# BT Home Hub 2.0 A
$(eval $(call ImageDTB,CFEDTB,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000))
# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
$(eval $(call ImageDTB,CFEDTB,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5))
# Comtrend AR-5381u

View file

@ -0,0 +1,51 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1748,6 +1748,32 @@
},
};
+static struct board_info __initdata board_homehub2a = {
+ .name = "HOMEHUB2A",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM4322,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
static struct board_info __initdata board_HW520 = {
.name = "HW6358GW_B",
.expected_cpu_id = 0x6358,
@@ -2748,6 +2774,7 @@
&board_nb4_ser_r0,
&board_nb4_fxc_r1,
&board_ct6373_1,
+ &board_homehub2a,
&board_HW520,
&board_HW553,
&board_HW556_A,
@@ -2845,6 +2872,7 @@
{ .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
{ .compatible = "t-com,spw303v", .data = &board_spw303v, },
{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ { .compatible = "thomson,homehub2a", .data = &board_homehub2a, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6362
{ .compatible = "sagem,f@st2504n", .data = &board_fast2504n, },

View file

@ -5,6 +5,16 @@
# See /LICENSE for more information.
#
define Profile/BTHOMEHUB2A
NAME:=BT Home Hub 2A
PACKAGES:=kmod-b43 wpad-mini \
kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
endef
define Profile/BTHOMEHUB2A/Description
Package set optimized for BTHOMEHUB2A.
endef
$(eval $(call Profile,BTHOMEHUB2A))
define Profile/BTV2500V
NAME:=BT Voyager V2500V
PACKAGES:=kmod-b43 wpad-mini