Commit graph

225 commits

Author SHA1 Message Date
Hauke Mehrtens
14006efcf3 sunxi: update Xunlong Orange Pi Zero Plus dts file
This updates the DTS file to the version send upstream

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-17 22:15:38 +01:00
Hauke Mehrtens
b7b14fd64e sunxi: Fix B53 swconfig driver for Lamobo R1
This reverts the changes needed for the upstream b53 DSA switch driver
to use the OpenWrt b43 swconfig switch driver instead.

Tested-by: TheWerthFam <thewerthfam@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-10 01:15:22 +01:00
Antony Antony
d6634edfc1 sunxi: NanoPi NEO Plus2 backport Gigabit Ethernet DT node
Kernel 4.16 commit 27d7f9297027

Signed-off-by: Antony Antony <antony@phenome.org>
2018-03-10 01:15:22 +01:00
Magnus Kroken
5af85dab22 kernel: bump 4.9 to 4.9.85
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-03-03 12:58:55 +01:00
Vitalij Alshevsky
70130268a8 sunxi: Add support for Xunlong Orange Pi PC
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Network 10/100M Ethernet RJ45
Onboard header pinout: SPI, I2C, 1-WIRE
USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG
Buttons: Power Button(SW4)
Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI..

Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
2018-02-26 11:24:04 +01:00
Hauke Mehrtens
6be73c07db sunxi: Add Xunlong Orange Pi Zero Plus
This is based on a patch from armbian:
https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:25 +01:00
Hauke Mehrtens
ef73ebbfe2 sunxi: Add Realtek PHY driver or ARM64 devices
The Orange Pi Zero Plus uses a RTL8211E, add the driver for this PHY.
This is probably used on more boards with a Allwinner SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:24 +01:00
Antony Antony
3c24a1d423 sunxi: add support for NanoPi NEO Plus2 board
arm64: allwinner: h5: NanoPi NEO Plus2 DT support
Add initial DT for NanoPi NEO Plus2 by FriendlyARM
    - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
    - 1 GB DDR3 RAM
    - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
    - micro SD card slot
    - Gigabit Ethernet (external RTL8211E-VB-CG chip)
    - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
    - 2x USB 2.0 host ports & 2x USB via headers

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Antony Antony
b7a1aa4df2 sunxi: add kernel DT for NanoPi NEO Plus2 board
Linux Kernel upstream commit d73413058

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Zoltan HERPAI
eae6003174 sunxi: switch to kernel 4.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-16 12:20:39 +01:00
Hauke Mehrtens
b33c3e1b7c sunxi: Orange Pi R1: configure USB Ethernet controller.
Now the USB port is the WAN port.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:59:38 +01:00
Hauke Mehrtens
40db7a9dec sunxi: Orange Pi R1: Fix USB Ethernet and activate SPI
The USB Ethernet is not working with the patches proposed for upstream,
fix this and activate the SPI node as this board always has a SPI flash.

Both patches are also targeted for upstream kernel 4.16 and 4.17.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:59:38 +01:00
Hauke Mehrtens
75f7c1c9ac sunxi: use upstream patch for Orange Pi R1
Instead of using our own device tree definitions use the one provided in
the upstream kernel for 4.16.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:54:17 +01:00
Hauke Mehrtens
b1c82cbd51 sunxi: backport stmmac network patches
Ethernet support was initial added in kernel 4.13, but deactivated
before the final release. This is backports the changes which are
activating it again from kernel 4.15.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:54:17 +01:00
Hauke Mehrtens
ad2b3bf310 sunxi: Add support for kernel 4.14
This is based on the code for kernel 4.9, but a lot of 4.9 patches are
backports from more recent kernel version and can be removed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:51:02 +01:00
Hauke Mehrtens
dda475ca30 sunxi: refresh kernel configuration
Just refresh the sunxi kernel configuration.
This also moves the CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG option to the
config-4.9 file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:49:59 +01:00
Kevin Darbyshire-Bryant
d8565a06dc kernel: bump 4.9 to 4.9.77
Refresh patches.
Remove upstreamed patches:

target/linux/generic/backport-4.9/023-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch
target/linux/generic/backport-4.9/023-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch
target/linux/generic/backport-4.9/023-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch
target/linux/generic/backport-4.9/023-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch

CVEs completely or partially addressed:

CVE-2017-5715
CVE-2017-5753
CVE-2017-17741
CVE-2017-1000410

Compile-tested: ar71xx Archer C7 v2
Run-tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-20 20:22:01 +01:00
Jo-Philipp Wich
7e99a6ba69 target: disable CONFIG_PROC_PAGE_MONITOR on most targets
Disable CONFIG_PROC_PAGE_MONITOR in most places and only keep it enabled
for virtual targets such as malta or potent ones like x86.

This saves up to 4KB of uncompressed kernel size and significantly
decreases CPU load under certain workloads.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-13 15:04:15 +01:00
Jo-Philipp Wich
f66fe0080a sunxi: enable missing config symbol
Enable CONFIG_MFD_AXP20X_I2C after the switch to Kernel 4.9, this symbol
is reportedly required to get USB working on the Banana Pi.

Ref: https://forum.lede-project.org/t/sunxi-kernel-4-9-usb-not-working/10513
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-11 03:14:07 +01:00
Stijn Tintel
8b35da1552 kernel: move CONFIG_KASAN to generic config
While bumping 4.14, the kernel build failed due to missing CONFIG_KASAN
symbol. Move it to generic config instead of defining it for all arm64
and x86/64 targets.

It was only added in 4.0, so not needed in config-3.18.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-01-02 21:55:46 +02:00
Hauke Mehrtens
f704b643b9 kernel: Update kernel 4.9 to 4.9.70
Runtime tested on lantiq.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-19 22:45:27 +01:00
Stijn Tintel
9fe59abef8 kernel: bump 4.9 to 4.9.65
Refresh patches.
Compile-tested: ar71xx, octeon, x86/64.
Runtime-tested: ar71xx, octeon, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-11-24 14:09:11 +02:00
Hauke Mehrtens
b5d52b2052 sunxi: remove support for kernel 4.4
Kernel 4.9 is working good on this target, remove support for kernel 4.4
now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 19:17:11 +01:00
Hauke Mehrtens
c048ca0ce0 sunxi: backport sunxi-mmc controller driver from 4.13
There are multiple problems on the A64 SoC with the older drivers which
are fixed in the upstream kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 19:16:42 +01:00
Koen Vandeputte
62ede4f783 kernel: bump 4.9 to 4.9.63
Refreshed all patches.

Removed upstreamed parts.

Compile-tested: cns3xxx, imx6, mvebu, layerscape
Run-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-11-22 20:45:52 +01:00
Luis Araneda
b31c1237c7 sunxi: add support for NanoPi M1 Plus board
Backported devicetree from Kernel 4.13 with some additions
to enable Ethernet and WiFi module

The following features are working:
- Ethernet
- WiFi
- eMMC and microSD slot
- USB ports

The following features are not working:
* Bluetooth

NanoPi M1 Plus key features
- SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz
- RAM: 1GB DDR3
- eMMC: 8GB
- microSD slot
- Ethernet 10/100/1000M
- Wifi: AP6212

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:30 +01:00
Luis Araneda
ef1483b8fe sunxi: base files: add AP6212 (brcm43430) NVRAM
Used by the NanoPi M1 Plus board

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:14 +01:00
Zoltan HERPAI
f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Kayo Phoenix
6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Stijn Tintel
834810617e kernel: bump 4.9 to 4.9.58
Refresh patches.
Compile-tested: ar71xx, octeon, x86/64.
Runtime-tested: octeon, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-23 17:23:34 +03:00
Kevin Darbyshire-Bryant
886d66abcd kernel: bump 4.9 to 4.9.57
Refresh patches.
Compile-tested for ar71xx - Archer C7 v2
Runtime-tested on  ar71xx - Archer C7 v2

Fixes the following CVEs:

- CVE-2017-7518
- CVE-2017-0786
- CVE-2017-1000255
- CVE-2017-12188
- CVE-2017-15265

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-18 19:44:09 +03:00
Lucian Cristian
b4fefe7b6e sunxi: backport support for Allwinner Security System PRNG
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-10-15 00:24:21 +02:00
Daniel Golle
34b153d7ad sunxi: build image for the NanoPi NEO
The NanoPi NEO is a small Allwinner H3 based board available with
different DRAM configurations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Daniel Golle
333f90347e sunxi: kernel: add patches for NanoPi NEO
Enable dwmac-sun8i Ethernet core to use the built-in FastEthernet port.
Enable exposed UART, USB and I2C pins.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Stijn Tintel
239dff6697 kernel: update and refresh patches
The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi
patch 0051-stmmac-form-4-11.patch no longer applied after applying the
the "generalize napi_complete_done()" patch.
Update them so they apply, and refresh patches while at it.

Fixes: 9aeb7ce8dc ("generic: net: generalize napi_complete_done")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:31:58 +03:00
Hauke Mehrtens
5508510e74 sunxi: add Orange Pi R1 support
The following features are working and tested:
* both Ethernet ports
* MMC
* LED

The following features are not working:
* Wifi (There is a crappy driver we could port)
* SPI flash (I haven't looked into this)

I haven't tried out the rest.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 17:10:33 +02:00
Hauke Mehrtens
25abd71efb sunxi: H3: add device tree changes for H3 Ethernet
This adds the device tree changes needed to make the GMAC stmmac driver
working for the Allwinner H3 SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:01:03 +02:00
Hauke Mehrtens
cf039cf7ff sunxi: A64: add device tree changes for A64 Ethernet
This adds the device tree changes needed to make the GMAC stmmac driver
working for the Allwinner A64 SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:01:03 +02:00
Hauke Mehrtens
ed43a4d4ac sunxi: backport the stmmac driver from kernel 4.13
This adds support for the GMAC which is use in the A64 and other
Allwinner chips by backporting the changes from the kernel versions
4.13.

Some commits are not backported which are adding support for newly
introduced APIs which are not available in kernel 4.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:00:16 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Lucian Cristian
f295db6e46 sunxi: add Olimex A20-OlinuXino-LIME2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-18 21:29:16 +02:00
Hauke Mehrtens
24c2f5125e sunxi: Add A64 support with cortex53 subtarget
This adds initial support for the A64 Allwinner SoC to LEDE.
It will be build in the new cortexa53 subtarget.

Currently it only supports the pine64 and the image is able to boot on
this SoC.

Camera, Ethernet, HDMI and other parts are currently not working.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
3b88f74bbe sunxi: Backport patches from kernel 4.11 for A64
This backports some more patches from kernel 4.11 adding more devices
to the device tree of the A64 SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
34a422794d sunxi: Backport patches needed for A64
This backports multiple patches from kernel 4.10 which are adding
missing support for the A64 and the pine64 board. These are the device
tree files, the pinctlk and the clock driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
41e7d2e2e8 sunxi: split into cortex A8 and A7 subtarget
Now we can activate some compiler optimizations for the cortex A7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
4b81bb13f4 sunxi: fix build of rtc package when module not available
If the Kconfig option CONFIG_RTC_DRV_SUNXI is not selected this package
should be be build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
ea9fab904b sunxi: add support for kernel 4.9
Most of the patches were backpoprts from the mainline kernel and are
integrated upstream now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:35:48 +02:00
Mathias Kresin
e0b9ec8e96 treewide: drop target board_name functions
They are not used any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ced05ca9e0 sunix: run b53_hack later
The script relies on the board name but runs prior the generic sysinfo
script which sets the board name.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00