treewide: use the generic board_name function

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2017-05-12 22:36:07 +02:00
parent ced05ca9e0
commit f12a32630f
94 changed files with 153 additions and 260 deletions

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/ar71xx.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
a40|\

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/cns3xxx.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(cns3xxx_board_name)
board=$(board_name)
case "$board" in
laguna)

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/imx6.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(imx6_board_name)
board=$(board_name)
case "$board" in
*gw5*)

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/ipq806x.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(ipq806x_board_name)
board=$(board_name)
case "$board" in
ea8500)

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/kirkwood.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(kirkwood_board_name)
board=$(board_name)
case "$board" in
dockstar|\

View file

@ -8,11 +8,10 @@
touch /etc/config/ubootenv
. /lib/mvebu.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(mvebu_board_name)
board=$(board_name)
case "$board" in
armada-385-linksys-caiman|\

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/mxs.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(mxs_board_name)
board=$(board_name)
case "$board" in
duckbill)

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/oxnas.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(oxnas_board_name)
board=$(board_name)
case "$board" in
akitio|\

View file

@ -7,11 +7,10 @@
touch /etc/config/ubootenv
. /lib/ramips.sh
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(ramips_board_name)
board=$(board_name)
case "$board" in
all0239-3g|\

View file

@ -11,10 +11,9 @@ NAME=om-watchdog
PROG=/sbin/om-watchdog
get_gpio() {
if [ -r /lib/ar71xx.sh ]; then
. /lib/ar71xx.sh
local board=$(ar71xx_board_name)
local board=$(board_name)
if [ -r /lib/ar71xx.sh ]; then
case "$board" in
"a40"|\
"a60"|\
@ -49,9 +48,6 @@ get_gpio() {
;;
esac
elif [ -r /lib/ramips.sh ]; then
. /lib/ramips.sh
local board=$(ramips_board_name)
case "$board" in
"rut5xx")
return 11

View file

@ -1,11 +1,10 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/apm821xx.sh
board_config_update
board=$(apm821xx_board_name)
board=$(board_name)
case "$board" in
mr24)

View file

@ -2,11 +2,10 @@
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/apm821xx.sh
board_config_update
board=$(apm821xx_board_name)
board=$(board_name)
case "$board" in
mbl|\

View file

@ -1,10 +1,10 @@
#!/bin/sh
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/apm821xx.sh
get_status_led() {
local board=$(apm821xx_board_name)
local board=$(board_name)
case $board in
mbl|\

View file

@ -2,7 +2,6 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/apm821xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
@ -48,7 +47,7 @@ ath9k_patch_firmware_mac() {
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
}
board=$(apm821xx_board_name)
board=$(board_name)
case "$FIRMWARE" in
"pci_wmac0.eeprom")

View file

@ -1,9 +1,8 @@
#!/bin/sh
. /lib/functions.sh
. /lib/apm821xx.sh
BOARD=$(apm821xx_board_name)
BOARD=$(board_name)
if [ $BOARD == "wndr4700" ]; then
case "$ACTION" in

View file

@ -1,9 +1,9 @@
#!/bin/sh
. /lib/apm821xx.sh
preinit_set_mac_address() {
case $(apm821xx_board_name) in
. /lib/functions.sh
case $(board_name) in
mr24|\
mx60)
mac_lan=$(mtd_get_mac_binary_ubi board-config 102)

View file

@ -1,12 +1,9 @@
#!/bin/sh
. /lib/apm821xx.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/apm821xx.sh
platform_check_image() {
local board=$(apm821xx_board_name)
local board=$(board_name)
[ "$#" -gt 1 ] && return 1
@ -36,7 +33,7 @@ platform_check_image() {
}
platform_pre_upgrade() {
local board=$(apm821xx_board_name)
local board=$(board_name)
case "$board" in
mr24|\
@ -54,7 +51,7 @@ platform_pre_upgrade() {
}
platform_do_upgrade() {
local board=$(apm821xx_board_name)
local board=$(board_name)
case "$board" in
mbl)
@ -68,7 +65,7 @@ platform_do_upgrade() {
}
platform_copy_config() {
local board=$(apm821xx_board_name)
local board=$(board_name)
case "$board" in
mbl)

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
board_config_update
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
a40)

View file

@ -5,7 +5,6 @@
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
ar71xx_setup_interfaces()
{
@ -545,7 +544,7 @@ ar71xx_setup_macs()
}
board_config_update
board=$(ar71xx_board_name)
board=$(board_name)
ar71xx_setup_interfaces $board
ar71xx_setup_macs $board
board_config_flush

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
board_config_update
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
nanostation-m)

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2009-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/ar71xx.sh
get_status_led() {
local board=$(ar71xx_board_name)
local board=$(board_name)
case $board in
a40)
@ -175,7 +175,7 @@ get_status_led() {
status_led="$board:blue:status"
;;
eap120)
status_led="$(ar71xx_board_name):green:system"
status_led="$board:green:system"
;;
eap300v2)
status_led="engenius:blue:power"
@ -516,7 +516,7 @@ set_state() {
;;
done)
status_led_on
case $(ar71xx_board_name) in
case $(board_name) in
gl-ar300m)
fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
;;

View file

@ -2,7 +2,6 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/ar71xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
@ -66,7 +65,7 @@ ath9k_patch_firmware_mac() {
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
}
board=$(ar71xx_board_name)
board=$(board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")

View file

@ -38,11 +38,10 @@ ath10kcal_patch_mac() {
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/ar71xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ar71xx_board_name)
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")

View file

@ -6,10 +6,10 @@ PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/ar71xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
archer-c58-v1)

View file

@ -37,9 +37,9 @@ ar922x_disable_gpio_jtag() {
}
[ $phyname -a $ACTION = "add" ] && {
. /lib/ar71xx.sh
. /lib/functions.sh
case $(ar71xx_board_name) in
case $(board_name) in
wzr-hp-ag300h)
ar922x_disable_gpio_jtag $phyname
;;

View file

@ -5,6 +5,8 @@
SWITCH_NAME_CHANGED=
. /lib/functions.sh
do_change_switch_name() {
local config="$1"
local option=$2
@ -25,8 +27,6 @@ migrate_switch_name() {
local oldname=$1
local newname=$2
. /lib/functions.sh
config_load network
logger -t migrate-switchX "Updating switch names in network configuration"
@ -40,9 +40,7 @@ migrate_switch_name() {
}
}
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
dir-825-c1|\

View file

@ -41,9 +41,7 @@ migrate_leds()
config_foreach do_led_update_sysfs led "$@"
}
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
dhp-1565-a1|\

View file

@ -3,9 +3,9 @@
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ar71xx.sh
. /lib/functions.sh
board=$(ar71xx_board_name)
board=$(board_name)
fixtrx() {
mtd -o 32 fixtrx firmware

View file

@ -1,6 +1,6 @@
#!/bin/sh
. /lib/ar71xx.sh
. /lib/functions.sh
fix_seama_header() {
local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
@ -8,7 +8,7 @@ fix_seama_header() {
[ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
}
board=$(ar71xx_board_name)
board=$(board_name)
case "$board" in
dir-869-a1)

View file

@ -2,8 +2,6 @@
# Copyright (C) 2009 OpenWrt.org
#
. /lib/ar71xx.sh
fetch_mac_from_mtd() {
local mtd_part=$1
local lan_env=$2
@ -21,7 +19,9 @@ fetch_mac_from_mtd() {
}
preinit_set_mac_address() {
case $(ar71xx_board_name) in
. /lib/functions.sh
case $(board_name) in
c-55|\
c-60)
mac_lan=$(mtd_get_mac_binary art 0)

View file

@ -4,10 +4,10 @@
# Copyright (C) 2009 OpenWrt.org
#
. /lib/ar71xx.sh
set_preinit_iface() {
case $(ar71xx_board_name) in
. /lib/functions.sh
case $(board_name) in
alfa-ap96 |\
alfa-nx |\
ap135-020 |\

View file

@ -1,8 +1,7 @@
#!/bin/sh
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/ar71xx.sh
do_patch_ath10k_firmware() {
local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin"
@ -25,7 +24,7 @@ do_patch_ath10k_firmware() {
# some boards have bogus mac in otp (= directly in the PCIe card's EEPROM).
# we have to patch the default mac in the firmware because we cannot change
# the otp.
case $(ar71xx_board_name) in
case $(board_name) in
dgl-5500-a1 | tew-823dru)
local mac
mac=$(mtd_get_mac_ascii nvram wlan1_mac)
@ -44,7 +43,7 @@ do_patch_ath10k_firmware() {
}
check_patch_ath10k_firmware() {
case $(ar71xx_board_name) in
case $(board_name) in
dgl-5500-a1 | tew-823dru)
do_patch_ath10k_firmware
;;

View file

@ -184,7 +184,7 @@ alfa_check_image() {
}
platform_nand_board_name() {
local board=$(ar71xx_board_name)
local board=$(board_name)
case "$board" in
rb*) echo "routerboard";;
@ -193,7 +193,7 @@ platform_nand_board_name() {
}
platform_check_image() {
local board=$(ar71xx_board_name)
local board=$(board_name)
local magic="$(get_magic_word "$1")"
local magic_long="$(get_magic_long "$1")"
@ -668,7 +668,7 @@ platform_check_image() {
}
platform_pre_upgrade() {
local board=$(ar71xx_board_name)
local board=$(board_name)
case "$board" in
c-60|\
@ -727,7 +727,7 @@ platform_pre_upgrade() {
}
platform_nand_pre_upgrade() {
local board=$(ar71xx_board_name)
local board=$(board_name)
case "$board" in
rb*)
@ -742,7 +742,7 @@ platform_nand_pre_upgrade() {
}
platform_do_upgrade() {
local board=$(ar71xx_board_name)
local board=$(board_name)
case "$board" in
all0258n)

View file

@ -3,12 +3,11 @@
# Copyright (C) 2015 OpenWrt.org
#
. /lib/arc.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$( arc_board_name )" in
case "$(board_name)" in
"arc-sdp"*)
ucidef_set_interface_lan "eth0" "dhcp"
;;

View file

@ -3,12 +3,11 @@
# Copyright (C) 2016 OpenWrt.org
#
. /lib/arc.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$( arc_board_name )" in
case "$(board_name)" in
"arc-sdp"*)
ucidef_set_interface_lan "eth0" "dhcp"
;;

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/at91.sh
board_config_update
case "$(at91_board_name)" in
case "$(board_name)" in
sama5d3_xplained)
ucidef_set_interfaces_lan_wan "eth0" "eth1"

View file

@ -8,10 +8,6 @@ get_magic_long_at() {
dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%02x"'
}
platform_machine() {
cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1
}
platform_flash_type() {
# On NAND devices "rootfs" is UBI volume, so won't be find in /proc/mtd
grep -q "\"rootfs\"" /proc/mtd && {
@ -23,7 +19,7 @@ platform_flash_type() {
}
platform_expected_image() {
local machine=$(platform_machine)
local machine=$(board_name)
case "$machine" in
"dlink,dir-885l") echo "seama wrgac42_dlink.2015_dir885l"; return;;

View file

@ -3,13 +3,12 @@
# Copyright (C) 2017 LEDE project
. /lib/functions/uci-defaults.sh
. /lib/brcm2708.sh
. /lib/functions.sh
. /lib/functions/system.sh
board_config_update
board=$(brcm2708_board_name)
board=$(board_name)
case "$board" in
rpi-2-b |\

View file

@ -2,11 +2,11 @@
# Copyright (C) 2015-2016 OpenWrt.org
# Copyright (C) 2017 LEDE project
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/brcm2708.sh
set_state() {
case "$(brcm2708_board_name)" in
case "$(board_name)" in
rpi-2-b |\
rpi-b-plus)
status_led="led1"

View file

@ -2,10 +2,10 @@
# Copyright (C) 2015-2016 OpenWrt.org
# Copyright (C) 2017 LEDE project
. /lib/brcm2708.sh
set_preinit_iface() {
case "$(brcm2708_board_name)" in
. /lib/functions.sh
case "$(board_name)" in
rpi-2-b |\
rpi-3-b |\
rpi-b |\

View file

@ -6,12 +6,8 @@ get_magic_long_at() {
dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
platform_machine() {
grep "machine" /proc/cpuinfo | sed "s/.*:[ \t]*//"
}
platform_expected_image() {
local machine=$(platform_machine)
local machine=$(board_name)
case "$machine" in
"Netgear WGR614 V8") echo "chk U12H072T00_NETGEAR"; return;;

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/brcm63xx.sh
board_config_update
case "$(brcm63xx_board_name)" in
case "$(board_name)" in
a4001n1)
ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0"
ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1"

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/brcm63xx.sh
board_config_update
case "$(brcm63xx_board_name)" in
case "$(board_name)" in
cvg834g |\
evg2000 |\

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2007-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/brcm63xx.sh
set_state() {
case "$(brcm63xx_board_name)" in
case "$(board_name)" in
a4001n1)
status_led="A4001N1:green:power"
;;

View file

@ -12,8 +12,6 @@ rt2x00_eeprom_extract() {
local count=$3
local mtd
. /lib/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
rt2x00_eeprom_die "no mtd device found for partition $part"
@ -24,9 +22,9 @@ rt2x00_eeprom_extract() {
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/brcm63xx.sh
. /lib/functions.sh
board=$(brcm63xx_board_name)
board=$(board_name)
case "$FIRMWARE" in
"rt2x00.eeprom" )

View file

@ -4,13 +4,13 @@
#
#
. /lib/brcm63xx.sh
. /lib/functions.sh
do_fixcrc() {
mtd fixtrx linux
}
case "$(brcm63xx_board_name)" in
case "$(board_name)" in
a4001n |\
a4001n1 |\
ar-5381u |\

View file

@ -4,9 +4,8 @@
#
. /lib/functions/uci-defaults.sh
. /lib/imx6.sh
board=$(imx6_board_name)
board=$(board_name)
board_config_update

View file

@ -2,10 +2,8 @@
# Copyright (C) 2010-2015 OpenWrt.org
#
. /lib/imx6.sh
platform_check_image() {
local board=$(imx6_board_name)
local board=$(board_name)
case "$board" in
*gw5*)
@ -19,7 +17,7 @@ platform_check_image() {
}
platform_pre_upgrade() {
local board=$(imx6_board_name)
local board=$(board_name)
case "$board" in
*gw5*)

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/ipq806x.sh
board_config_update
board=$(ipq806x_board_name)
board=$(board_name)
case "$board" in
c2600)

View file

@ -5,12 +5,11 @@
#
. /lib/functions/uci-defaults.sh
. /lib/ipq806x.sh
. /lib/functions/system.sh
board_config_update
board=$(ipq806x_board_name)
board=$(board_name)
case "$board" in
ap148 |\

View file

@ -38,11 +38,10 @@ ath10kcal_patch_mac() {
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/ipq806x.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ipq806x_board_name)
board=$(board_name)
case "$FIRMWARE" in

View file

@ -6,10 +6,10 @@ PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/ipq806x.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ipq806x_board_name)
board=$(board_name)
case "$board" in
c2600)

View file

@ -4,9 +4,8 @@
START=97
boot() {
. /lib/functions.sh
. /lib/ipq806x.sh
case $(ipq806x_board_name) in
case $(board_name) in
ea8500)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"

View file

@ -1,5 +1,3 @@
. /lib/ipq806x.sh
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
@ -11,9 +9,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board=$(ipq806x_board_name)
case "$board" in
case "$(board_name)" in
ap148 |\
ap-dk04.1-c1 |\
d7800 |\
@ -43,9 +39,7 @@ platform_do_upgrade() {
}
platform_nand_pre_upgrade() {
local board=$(ipq806x_board_name)
case "$board" in
case "$(board_name)" in
nbg6817)
zyxel_do_upgrade "$1"
;;

View file

@ -1,7 +1,3 @@
. /lib/ixp4xx.sh
RAMFS_COPY_DATA="/lib/ixp4xx.sh"
CI_BLKSZ=65536
CI_LDADR=0x00800000
@ -86,7 +82,7 @@ platform_do_upgrade_combined() {
}
platform_check_image() {
local board=$(ixp4xx_board_name)
local board=$(board_name)
local magic="$(get_magic_word "$1")"
local partitions=$(platform_find_partitions)
local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
@ -127,7 +123,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board=$(ixp4xx_board_name)
local board=$(board_name)
v "board=$board"
case "$board" in

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/kirkwood.sh
board_config_update
board=$(kirkwood_board_name)
board=$(board_name)
case "$board" in
"dockstar")

View file

@ -5,11 +5,10 @@
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/kirkwood.sh
board_config_update
board=$(kirkwood_board_name)
board=$(board_name)
case "$board" in
"dockstar"|\

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2014 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/kirkwood.sh
get_status_led() {
case $(kirkwood_board_name) in
case $(board_name) in
dockstar|\
goflexhome|\
goflexnet)

View file

@ -4,9 +4,8 @@
START=97
boot() {
. /lib/functions.sh
. /lib/kirkwood.sh
case $(kirkwood_board_name) in
case $(board_name) in
linksys-audi|linksys-viper)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"

View file

@ -3,14 +3,13 @@
START=98
boot() {
. /lib/functions.sh
. /lib/kirkwood.sh
#configuring lm85 onboard temp/fan controller to run the fan on its own
#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
case $(kirkwood_board_name) in
case $(board_name) in
nsa310b)
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes

View file

@ -1,11 +1,9 @@
. /lib/kirkwood.sh
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
[ "$#" -gt 1 ] && return 1
local board="$(kirkwood_board_name)"
local board="$(board_name)"
local magic="$(get_magic_long "$1")"
case "$board" in
@ -28,7 +26,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board="$(kirkwood_board_name)"
local board="$(board_name)"
case "$board" in
"linksys-audi"|\

View file

@ -4,11 +4,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/mcs814x.sh
board_config_update
board=$(mcs814x_board_name)
board=$(board_name)
case "$board" in
dlan-usb-extender)

View file

@ -2,13 +2,12 @@
# Copyright (C) 2014-2015 OpenWrt.org
. /lib/functions/uci-defaults.sh
. /lib/mpc85xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
board_config_update
board=$(mpc85xx_board_name)
board=$(board_name)
case "$board" in
tl-wdr4900-v1)

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/mpc85xx.sh
get_status_led() {
case $(mpc85xx_board_name) in
case $(board_name) in
tl-wdr4900-v1)
status_led="tp-link:blue:system"
;;

View file

@ -13,9 +13,6 @@ ath9k_eeprom_extract() {
local count=$3
local mtd
. /lib/functions.sh
. /lib/functions/system.sh
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath9k_eeprom_die "no mtd device found for partition $part"
@ -29,9 +26,6 @@ tpl_set_wireless_mac()
local offset=$1
local mac
. /lib/functions.sh
. /lib/functions/system.sh
mac=$(mtd_get_mac_binary u-boot 326656)
mac=$(macaddr_add $mac $offset)
@ -40,9 +34,10 @@ tpl_set_wireless_mac()
[ -e $FW_FILE ] && exit 0
. /lib/mpc85xx.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(mpc85xx_board_name)
board=$(board_name)
case "$FIRMWARE" in
"pci_wmac0.eeprom")

View file

@ -2,10 +2,7 @@
# Copyright (C) 2011 OpenWrt.org
#
. /lib/mpc85xx.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/mpc85xx.sh
tplink_get_hwid() {
local part
@ -25,7 +22,7 @@ tplink_get_image_boot_size() {
}
platform_check_image() {
local board=$(mpc85xx_board_name)
local board=$(board_name)
local magic="$(get_magic_long "$1")"
[ "$#" -gt 1 ] && return 1
@ -65,7 +62,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board=$(mpc85xx_board_name)
local board=$(board_name)
case "$board" in
*)

View file

@ -5,11 +5,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/mvebu.sh
board_config_update
board=$(mvebu_board_name)
board=$(board_name)
case "$board" in
armada-385-linksys-caiman)

View file

@ -5,11 +5,10 @@
#
. /lib/functions/uci-defaults.sh
. /lib/mvebu.sh
board_config_update
board=$(mvebu_board_name)
board=$(board_name)
case "$board" in
armada-385-linksys-caiman|\

View file

@ -2,11 +2,11 @@
# Copyright (C) 2014-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-Project.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/mvebu.sh
get_status_led() {
case $(mvebu_board_name) in
case $(board_name) in
armada-385-linksys-caiman)
status_led="caiman:white:power"
;;

View file

@ -5,9 +5,8 @@
START=97
boot() {
. /lib/functions.sh
. /lib/mvebu.sh
case $(mvebu_board_name) in
case $(board_name) in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"

View file

@ -5,10 +5,10 @@
[ ! -e /etc/config/wireless ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/mvebu.sh
board=$(mvebu_board_name)
board=$(board_name)
case "$board" in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)

View file

@ -3,9 +3,9 @@
# Copyright (C) 2017 LEDE-Project.org
#
. /lib/mvebu.sh
. /lib/functions.sh
board=$(mvebu_board_name)
board=$(board_name)
case "$board" in
armada-xp-linksys-mamba)

View file

@ -7,9 +7,8 @@ preinit_set_mac_address() {
local mac
. /lib/functions.sh
. /lib/mvebu.sh
case $(mvebu_board_name) in
case $(board_name) in
armada-xp-linksys-mamba)
mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ifconfig eth0 hw ether $mac 2>/dev/null

View file

@ -6,9 +6,8 @@
preinit_mount_syscfg() {
. /lib/functions.sh
. /lib/mvebu.sh
case $(mvebu_board_name) in
case $(board_name) in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
needs_recovery=0
syscfg_part=$(grep syscfg /proc/mtd |cut -c4)

View file

@ -3,10 +3,8 @@
# Copyright (C) 2016 LEDE-Project.org
#
. /lib/mvebu.sh
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/lib/mvebu.sh /etc/fw_env.config /var/lock/fw_printenv.lock'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
@ -14,9 +12,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board=$(mvebu_board_name)
case "$board" in
case "$(board_name)" in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
platform_do_upgrade_linksys "$ARGV"
;;
@ -32,9 +28,7 @@ platform_do_upgrade() {
esac
}
platform_copy_config() {
local board=$(mvebu_board_name)
case "$board" in
case "$(board_name)" in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
platform_copy_config_linksys
;;

View file

@ -2,11 +2,10 @@
# Copyright (C) 2013-2015 OpenWrt.org
. /lib/functions/uci-defaults.sh
. /lib/mxs.sh
board_config_update
board=$(mxs_board_name)
board=$(board_name)
case "$board" in
*)

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2013-2014 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/mxs.sh
get_status_led() {
case $(mxs_board_name) in
case $(board_name) in
duckbill)
status_led="duckbill:green:status"
;;

View file

@ -1,9 +1,8 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/oxnas.sh
board=$(oxnas_board_name)
board=$(board_name)
board_config_update
case $board in

View file

@ -8,7 +8,7 @@ board_config_update
lan_mac=""
case "$(oxnas_board_name)" in
case "$(board_name)" in
kd20)
lan_mac="$(legacy_boot_mac_adr)"
;;

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2009-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/oxnas.sh
get_status_led() {
case $(oxnas_board_name) in
case $(board_name) in
akitio)
status_led="akitio:red:status"
;;

View file

@ -2,13 +2,10 @@
# Copyright (C) 2014 OpenWrt.org
#
. /lib/oxnas.sh
RAMFS_COPY_DATA=/lib/oxnas.sh
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
local board=$(oxnas_board_name)
local board=$(board_name)
[ "$ARGC" -gt 1 ] && return 1

View file

@ -2,13 +2,10 @@
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ppc40x.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/ppc40x.sh
platform_check_image() {
local board=$(ppc40x_board_name)
local board=$(board_name)
local magic="$(get_magic_word "$1")"
[ "$#" -gt 1 ] && return 1
@ -28,7 +25,7 @@ platform_check_image() {
}
platform_do_upgrade() {
local board=$(ppc40x_board_name)
local board=$(board_name)
case "$board" in
*)

View file

@ -1,7 +1,6 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/ramips.sh
set_usb_led() {
ucidef_set_led_usbdev "usb" "USB" "${1}" "${2:-1-1}"
@ -12,7 +11,7 @@ set_wifi_led() {
}
board=$(ramips_board_name)
board=$(board_name)
board_config_update

View file

@ -1,7 +1,6 @@
#!/bin/sh
. /lib/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
@ -494,7 +493,7 @@ ramips_setup_macs()
}
board_config_update
board=$(ramips_board_name)
board=$(board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
board_config_flush

View file

@ -1,11 +1,10 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/ramips.sh
board_config_update
board=$(ramips_board_name)
board=$(board_name)
case "$board" in
ubnt-erx)

View file

@ -1,11 +1,11 @@
#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
. /lib/ramips.sh
get_status_led() {
board=$(ramips_board_name)
board=$(board_name)
case $board in
3g150b|\

View file

@ -11,8 +11,6 @@ rt2x00_eeprom_extract() {
local count=$3
local mtd
. /lib/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
rt2x00_eeprom_die "no mtd device found for partition $part"
@ -35,10 +33,10 @@ rt2x00_eeprom_set_macaddr() {
FW="/lib/firmware/$FIRMWARE"
[ -e "$FW" ] && exit 0
. /lib/ramips.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ramips_board_name)
board=$(board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")

View file

@ -3,9 +3,9 @@
START=99
start() {
. /lib/ramips.sh
. /lib/functions.sh
local board=$(ramips_board_name)
local board=$(board_name)
if [ $board = "sk-wb8" ]; then
fw_setenv bootcount 0
fi

View file

@ -3,7 +3,7 @@
# Copyright (C) 2012 OpenWrt.org
#
. /lib/ramips.sh
. /lib/functions.sh
fix_seama_header() {
local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
@ -11,7 +11,7 @@ fix_seama_header() {
[ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
}
board=$(ramips_board_name)
board=$(board_name)
case "$board" in
cy-swr1100 | \

View file

@ -6,9 +6,9 @@
# that happens, so this needs to run very early during boot.
do_checksumming_disable() {
. /lib/ramips.sh
. /lib/functions.sh
local board=$(ramips_board_name)
local board=$(board_name)
case "$board" in
wnce2001)

View file

@ -2,13 +2,10 @@
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ramips.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/ramips.sh
platform_check_image() {
local board=$(ramips_board_name)
local board=$(board_name)
local magic="$(get_magic_long "$1")"
[ "$#" -gt 1 ] && return 1
@ -275,7 +272,7 @@ platform_check_image() {
}
platform_nand_pre_upgrade() {
local board=$(ramips_board_name)
local board=$(board_name)
case "$board" in
ubnt-erx|\
@ -286,7 +283,7 @@ platform_nand_pre_upgrade() {
}
platform_do_upgrade() {
local board=$(ramips_board_name)
local board=$(board_name)
case "$board" in
hc5962|\

View file

@ -1,14 +1,13 @@
#!/bin/sh
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/ramips.sh
partname=""
offset=""
NEW_MAC=
YES=
board=$(ramips_board_name)
board=$(board_name)
case $board in
witi)
partname=factory

View file

@ -3,12 +3,11 @@
# Copyright (C) 2013-2015 OpenWrt.org
#
. /lib/sunxi.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$( sunxi_board_name )" in
case "$(board_name)" in
"olimex,a20-olinuxino-micro")
ucidef_set_interface_lan 'wlan0'
;;

View file

@ -1,9 +1,10 @@
#!/bin/sh
. /lib/sunxi.sh
do_b53_hack() {
. /lib/functions.sh
# hack: enable switch on Lamobo R1 and reset counters
case "$( sunxi_board_name )" in
case "$(board_name)" in
"lamobo,lamobo-r1")
ifconfig eth0 up
sleep 1