KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
36016 commits 3 branches 0 tags 154 MiB
Commit graph

450 commits

Author SHA1 Message Date
Rafał Miłecki
48da51ed03 bcm53xx: update NVRAM driver to support getting contents 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45907
 2015-06-05 21:49:57 +00:00
Rafał Miłecki
9845d729a9 bcm53xx: build images for Asus devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45790
 2015-05-27 16:20:06 +00:00
Hauke Mehrtens
47eca7a1ca bcm53xx: add OHCI (USB 1.1) support 
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
 2015-05-23 14:54:44 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Rafał Miłecki
63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
 2015-05-17 12:10:38 +00:00
Rafał Miłecki
75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U 
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
 2015-05-16 17:14:25 +00:00
Rafał Miłecki
ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
 2015-05-16 15:44:00 +00:00
Rafał Miłecki
abed46aacc bcm53xx: enable RT-AC87U UART console 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
 2015-05-16 11:45:52 +00:00
Rafał Miłecki
3dd9274332 bcm53xx: add support for SmartRG SR400ac 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
 2015-05-13 20:01:15 +00:00
Rafał Miłecki
b4ecf19faa bcm53xx: replace DT patches with backports from stblinux 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
 2015-05-13 20:01:03 +00:00
Rafał Miłecki
af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
 2015-05-13 14:34:23 +00:00
Rafał Miłecki
afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
 2015-05-13 13:12:57 +00:00
Rafał Miłecki
610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
 2015-05-13 13:11:17 +00:00
Rafał Miłecki
2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000 
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
 2015-05-13 13:11:04 +00:00
Rafał Miłecki
45ec92fa30 bcm53xx: bgmac: add support for the 3rd core 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
 2015-05-13 13:11:00 +00:00
Rafał Miłecki
d2e5e2bf54 bcm53xx: sync NVRAM and SPROM drivers with upstream version 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45678
 2015-05-13 08:30:45 +00:00
Rafał Miłecki
3a6cdac37c kernel: backport first bcma patches from 4.2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
 2015-05-09 17:38:48 +00:00
Rafał Miłecki
33e597b241 bcm53xx: sort ports from NVRAM entries before matching them 
Some devices have unsorted ports which may lead to broken config.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45575
 2015-04-24 07:47:25 +00:00
Rafał Miłecki
866fe3895d bcm53xx: sysupgrade: check if new kernel fits partition size 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45547
 2015-04-21 11:21:34 +00:00
Rafał Miłecki
457d9caf4d bcm53xx: sysupgrade: improve NAND warnings 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45546
 2015-04-21 11:04:38 +00:00
Rafał Miłecki
5b9d70c888 bcm53xx: image: prepare for generating serial flash images 
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45545
 2015-04-21 08:42:41 +00:00
Rafał Miłecki
a86e7330dc bcm53xx: sysupgrade: drop some debugging message 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45544
 2015-04-21 08:34:25 +00:00
Rafał Miłecki
688c1d74b9 bcm53xx: sysupgrade: allow flashing NAND devices without --force 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45543
 2015-04-21 08:32:59 +00:00
Rafał Miłecki
d263c8e1a9 bcm53xx: sysupgrade: support flashing TRX with UBI image 
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45542
 2015-04-21 08:20:06 +00:00
Rafał Miłecki
92875dbd3d bcm53xx: append only 1 block (with erasing mark) to UBI 
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.

Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45541
 2015-04-21 08:20:00 +00:00
Rafał Miłecki
ac6879caaa bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades 
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45540
 2015-04-21 08:19:53 +00:00
Felix Fietkau
c73adc80a3 bcm53xx: add profiling support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
 2015-04-17 18:52:15 +00:00
Rafał Miłecki
9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
 2015-04-17 06:03:00 +00:00
Felix Fietkau
582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
 2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63 bcm53xx: add power button for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
 2015-04-16 20:09:55 +00:00
Felix Fietkau
f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
 2015-04-16 20:09:36 +00:00
Felix Fietkau
d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
 2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
 2015-04-16 20:09:08 +00:00
Felix Fietkau
c64fdadea7 bcm53xx: make use of the new board detection layer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
 2015-04-16 12:18:34 +00:00
Felix Fietkau
147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
 2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
 2015-04-15 16:06:14 +00:00
Rafał Miłecki
3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
 2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode 
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
 2015-04-14 20:50:46 +00:00
Felix Fietkau
923bef1678 bcm53xx: refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
 2015-04-13 22:23:37 +00:00
Felix Fietkau
24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
 2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915 bcm53xx: fix GPIO pins > 16 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
 2015-04-13 17:32:18 +00:00
Felix Fietkau
1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
 2015-04-13 17:32:05 +00:00
Felix Fietkau
d24388da44 bcm53xx: add a comment about the gpio base patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
 2015-04-12 22:10:44 +00:00
Rafał Miłecki
77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config 
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
 2015-04-12 20:11:25 +00:00
Felix Fietkau
2dbe131a62 bcm53xx: fix bcma gpio chip base 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45399
 2015-04-12 17:22:04 +00:00
Rafał Miłecki
95ef64a779 bcm53xx: allow sysupgrade firmwares without UBI containing rootfs 
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45392
 2015-04-12 12:04:13 +00:00
Rafał Miłecki
24d40980b0 bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade 
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45391
 2015-04-12 11:46:16 +00:00
Rafał Miłecki
a04b71d330 bcm53xx: rework vendor fw handling to don't duplicate upgrade calls 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45389
 2015-04-12 10:42:27 +00:00
Rafał Miłecki
503ccc502d bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation 
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45387
 2015-04-12 10:20:59 +00:00
Rafał Miłecki
9d6e04a4f1 bcm53xx: build image for ASUS RT-AC56U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45353
 2015-04-10 09:58:00 +00:00
Rafał Miłecki
71fcbffc91 bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45352
 2015-04-10 09:42:48 +00:00
Rafał Miłecki
2198db252c bcm53xx: switch to the otrx for verifying TRX images 
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45320
 2015-04-09 06:33:56 +00:00
Rafał Miłecki
4c1ee6f24d bcm53xx: replace few BCM5301X patches with versions sent upstream 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45311
 2015-04-08 09:22:02 +00:00
Rafał Miłecki
b6e8da2e14 bcm53xx: image: share function checking TRX in provided firmware 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45292
 2015-04-07 14:14:08 +00:00
Rafał Miłecki
7abd779730 bcm53xx: display all errors (not just the 1st one) when checking image 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45291
 2015-04-07 14:14:02 +00:00
Rafał Miłecki
a19b69a717 bcm53xx: compare provided firmware magic with device magic 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45290
 2015-04-07 14:13:56 +00:00
Rafał Miłecki
509cce44bd bcm53xx: sprom: sync with mainline driver 
The main difference now is bcm53xx registering it as platform (DT)
driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45230
 2015-04-02 12:02:56 +00:00
Rafał Miłecki
91071e366c bcm53xx: sprom: simplify reading NVRAM after last backports 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45229
 2015-04-02 12:01:56 +00:00
Rafał Miłecki
bf828d3fd0 bcm53xx: use bcm47xx_nvram.c with the latest patches 
This will be hopefully a mainline version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45204
 2015-04-01 07:21:59 +00:00
Felix Fietkau
414e8ba634 bcm53xx: use the correct kernel image 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45003
 2015-03-26 10:42:36 +00:00
Felix Fietkau
48c69e3022 bcm53xx: convert to new image building code 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44996
 2015-03-25 17:57:44 +00:00
Felix Fietkau
68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
 2015-03-25 14:30:40 +00:00
Felix Fietkau
0a84da0841 bcm53xx: add missing cache controller errata options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44947
 2015-03-23 10:14:27 +00:00
Felix Fietkau
a6f914d573 bcm53xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946
 2015-03-23 10:14:20 +00:00
Rafał Miłecki
fb6164a377 bcm53xx: add SMP support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44939
 2015-03-22 15:07:40 +00:00
Rafał Miłecki
e0155ad7b0 bcm53xx: add support for Asus RT-AC68U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44934
 2015-03-22 01:57:15 +00:00
Rafał Miłecki
79c152b56b bcm53xx: fix Asus RT-AC87U magic (even if not used yet) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44933
 2015-03-22 01:57:10 +00:00
Rafał Miłecki
d324dd4ff3 bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44932
 2015-03-22 01:57:06 +00:00
Rafał Miłecki
a4523c8e1d bcm53xx: refresh patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44931
 2015-03-22 01:56:47 +00:00
Rafał Miłecki
ba10454b91 kernel: backport bgmac patches 
This allows dropping some hacky bcm53xx bgmac patch forcing link state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44917
 2015-03-21 11:45:50 +00:00
Rafał Miłecki
782e432797 bcm53xx: enable FIXED_PHY, we will need it for bgmac 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44916
 2015-03-21 11:45:27 +00:00
Rafał Miłecki
7c6f7b716b bcm53xx: switch to 3.18 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
 2015-03-16 22:24:56 +00:00
Rafał Miłecki
0a9b7ea932 bcm53xx: support NVRAM prefixes with extra / in devpath 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44755
 2015-03-14 16:35:56 +00:00
Rafał Miłecki
2b56913734 bcm53xx: fixup early device id 8012 
Looks like the BCM53012 has a similar problem to the BCM53011.

Signed-off-by: Ian Kent <raven@themaw.net>

SVN-Revision: 44680
 2015-03-11 17:32:02 +00:00
Rafał Miłecki
4c67f1d464 bcm53xx: fix typo in bcm47xx sprom driver 
Fix thinko' in the bcm47xx sprom driver.

Signed-off-by: Ian Kent <raven@themaw.net>

SVN-Revision: 44679
 2015-03-11 17:10:19 +00:00
Rafał Miłecki
c3b9b35155 bcm53xx: fix printing NAND controller revision 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44622
 2015-03-07 12:31:42 +00:00
John Crispin
d15ac306fa kernel: move KERNFS to generic config 
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
 2015-03-06 07:56:47 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
 2015-03-06 07:56:34 +00:00
John Crispin
6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config 
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
 2015-03-06 07:56:08 +00:00
Rafał Miłecki
c2cf1abf8f bcm53xx: switch to IRQ buttons (keys) 
Now bcma provides IRQ domain we don't have to poll anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44596
 2015-03-03 23:15:55 +00:00
Rafał Miłecki
a416029d4d bcm53xx: add one more NVRAM possible size (0x180000) 
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44497
 2015-02-20 07:07:53 +00:00
Rafał Miłecki
08b45f73db bcm53xx: include kmod-brcmfmac in default profile 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44467
 2015-02-16 19:51:21 +00:00
Rafał Miłecki
44253d311f bcm53xx: sprom: extract for PCI host 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44464
 2015-02-16 16:13:23 +00:00
Rafał Miłecki
4c98253648 bcm53xx: sprom: prepare to support other hosttype-s 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44463
 2015-02-16 16:10:05 +00:00
Rafał Miłecki
b5310e180d bcm53xx: use bcm47xx_wdt for restarting device 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44408
 2015-02-11 14:41:07 +00:00
Rafał Miłecki
6bafb2f810 bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44390
 2015-02-11 10:11:00 +00:00
Rafał Miłecki
ddcbef5766 kernel: backport bcma patches queued for 3.20 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44385
 2015-02-11 10:04:51 +00:00
Rafał Miłecki
3ae30df7db bcm53xx: drop unused (and broken) GPIOLIB patch 
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44383
 2015-02-11 08:42:34 +00:00
Rafał Miłecki
3dbaab6f67 bcm53xx: fix loading SPROM content by bcma init change 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44367
 2015-02-09 18:43:05 +00:00
Rafał Miłecki
539cd23892 bcm53xx: fix partitions on Netgear R8000 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44219
 2015-01-30 07:25:43 +00:00
Rafał Miłecki
1d1a1c19bf bcm53xx: fix booting BCM4709 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44218
 2015-01-30 06:58:35 +00:00
Rafał Miłecki
ee75859533 bcm53xx: fix Netgear R8000 serial console 
Thanks raven-auand.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44217
 2015-01-30 06:30:44 +00:00
Rafał Miłecki
251b42d491 bcm53xx: early support for Netgear R8000 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44186
 2015-01-28 21:55:43 +00:00
Rafał Miłecki
bba98a3c53 bcm53xx: backport official Buffalo WZR-900DHP patch 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44070
 2015-01-21 07:23:31 +00:00
Rafał Miłecki
3b701e8023 bcm53xx: backport spi-nor changes to add gd25q128 support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44069
 2015-01-21 06:53:15 +00:00
Rafał Miłecki
f0d73a4381 bcm53xx: use final (backported) patch fixing serial console 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44059
 2015-01-20 08:04:27 +00:00
Rafał Miłecki
ea1fe45fae bcm53xx: backport 3 BCM5301X patches from Hauke repo 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44058
 2015-01-20 07:21:30 +00:00
Rafał Miłecki
9758327d83 bcm53xx: rename patches modifying DTS files 
Ths will allow us to use early 3xx numbers for patches designed for
sending mainline.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44057
 2015-01-20 06:58:03 +00:00
Rafał Miłecki
78b0da393b bcm53xx: add support/firmware for Asus RT-AC87U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44051
 2015-01-19 11:05:22 +00:00
Rafał Miłecki
71c8ec020d bcm53xx: drop hacky patch making bcma init later 
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43981
 2015-01-16 15:59:29 +00:00
Rafał Miłecki
4ae1e883e8 bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43972
 2015-01-14 13:41:05 +00:00
Rafał Miłecki
f59c84c431 bcm53xx: enable earlyprintk on more devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43965
 2015-01-14 07:42:48 +00:00
Rafał Miłecki
8e95c2c5be bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43964
 2015-01-14 07:03:42 +00:00
Rafał Miłecki
55e766d78d bcm53xx: refresh configs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43963
 2015-01-14 07:03:17 +00:00
Rafał Miłecki
d1a28cfbb2 bcm53xx: support flashing CHK and CyberTAN images 
SVN-Revision: 43800
 2014-12-30 17:45:53 +00:00
Rafał Miłecki
e7d7f59171 bcm53xx: support WAN connected to switch port 0 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
 2014-12-20 15:09:01 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again 
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
 2014-12-18 16:23:42 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
 2014-12-17 14:53:25 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
 2014-12-15 15:43:46 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
 2014-12-11 20:31:07 +00:00
Rafał Miłecki
b55199cf41 bcm53xx: support LEDs on Buffalo devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
 2014-12-11 11:23:26 +00:00
Rafał Miłecki
40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
 2014-12-10 21:50:57 +00:00
Rafał Miłecki
ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM 
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
 2014-12-10 21:24:11 +00:00
Rafał Miłecki
b0b43e1ef9 bcm53xx: use static NVRAM pointer for now 
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
 2014-12-10 19:56:56 +00:00
Rafał Miłecki
960130e99c bcm53xx: clean up nvram header 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
 2014-12-10 18:29:26 +00:00
Rafał Miłecki
7093580424 bcm53xx: move SPROM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
 2014-12-10 18:07:01 +00:00
Rafał Miłecki
27a91a99d9 bcm53xx: move NVRAM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
 2014-12-10 18:01:24 +00:00
Rafał Miłecki
3fab0d818c bcm53xx: move NVRAM header to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
 2014-12-10 17:37:24 +00:00
Rafał Miłecki
613bc3ef3f bcm53xx: bcm_nand: fix compilation 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43584
 2014-12-08 18:28:54 +00:00
Rafał Miłecki
aed6b26431 bcm53xx: bcm_nand: switch from cmdlinepart to ofpart 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43580
 2014-12-08 17:39:07 +00:00
Hauke Mehrtens
7a2f186d70 bcm53xx: update the NAND driver 
This adds some updates to the NAND driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43546
 2014-12-07 21:55:21 +00:00
Hauke Mehrtens
664ae86dde bcm53xx: update the PCIe driver 
This adds some updates to the PCIe driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43545
 2014-12-07 21:54:53 +00:00
Hauke Mehrtens
d9bb8326fa kernel: update bcma and ssb to wireless-testing master-2014-12-05 
This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43544
 2014-12-07 21:53:20 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
 2014-12-07 16:12:44 +00:00
Rafał Miłecki
dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
 2014-12-07 11:02:52 +00:00
Rafał Miłecki
a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
 2014-12-07 10:55:44 +00:00
Rafał Miłecki
9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
 2014-12-05 16:46:55 +00:00
Rafał Miłecki
d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
 2014-12-05 16:15:16 +00:00
Rafał Miłecki
8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
 2014-12-05 16:13:27 +00:00
Rafał Miłecki
8033ccc975 kernel: update bcma up to 2014-10-27 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
 2014-12-05 16:11:03 +00:00
Hauke Mehrtens
a69ebe234d kernel: update kernel 3.18 to rc4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
 2014-11-10 22:51:30 +00:00
Rafał Miłecki
93b3924128 kernel: backport bcm47xxpart changes queued for 3.19 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43223
 2014-11-08 21:41:21 +00:00
Hauke Mehrtens
adbb5ad195 bcm53xx: bcma: get IRQs also from device tree 
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43148
 2014-11-01 15:57:30 +00:00
Hauke Mehrtens
6e6dffbe81 bcm53xx: set customized AUXCTL 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43146
 2014-11-01 13:58:18 +00:00
Hauke Mehrtens
5e13e40591 bcm53xx: activate early printk 
This makes it possible to activate early printk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43145
 2014-11-01 13:57:50 +00:00
Hauke Mehrtens
8e20cceeae bcm53xx: refresh patches 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43144
 2014-11-01 13:55:02 +00:00
Hauke Mehrtens
f12c4b0815 bcm53xx: remove support for fpu 
This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43098
 2014-10-27 23:04:07 +00:00
Hauke Mehrtens
7fc9bb1aca bcm53xx: initial support for kernel 3.18 
This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43097
 2014-10-27 23:02:08 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER 
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
 2014-10-24 19:34:02 +00:00
Rafał Miłecki
c14e0807bd bcm53xx: backport forgotten spi-nor change 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43031
 2014-10-22 14:34:43 +00:00
Rafał Miłecki
2466b04a5a bcm53xx: backport spi-nor patches from 3.18-rc1 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43030
 2014-10-22 14:16:18 +00:00
Rafał Miłecki
bf0342f0ef bcm53xx: add support for Asus RT-N18U LEDs & buttons 
Got GPIOs from #18152 thanks to Grrruk

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43010
 2014-10-21 14:37:44 +00:00
Rafał Miłecki
4669d08e83 bcm53xx: switch RT-N18U firmware to the UBI 
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43008
 2014-10-20 22:09:40 +00:00
Rafał Miłecki
4fce5d1951 bcm53xx: image: switch Netgear and Buffalo devices to UBI 
We still don't have a smart sysupgrade method, but at least we can use
UBI which provides some protection for rootfs (SquashFS).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42941
 2014-10-16 21:33:34 +00:00
Rafał Miłecki
150c200e91 bcm53xx: hack UBI to erase all dirty blocks left by CFE 
UBI requires PEBs to be formatted (with a valid UBI header) or empty
(0xFF), however CFE doesn't clear blocks after flashing the image. To
workaround this problem, teach UBI to recognize EOF mark in a similar
way JFFS2 handles that in OpenWrt.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42940
 2014-10-16 20:52:22 +00:00
Rafał Miłecki
1ffe299eab bcm53xx: enable UBI and UBIFS 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42939
 2014-10-16 20:50:36 +00:00
Rafał Miłecki
aa5b5153f9 bcm53xx: image: build UBI partition image 
This could be used on NAND devices once we get UBI working.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42938
 2014-10-16 20:48:56 +00:00
Rafał Miłecki
241c098fa1 bcm53xx: image: specify flash type for all devices 
This will allow us to add proper support for NAND one day.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42937
 2014-10-16 20:44:44 +00:00
Rafał Miłecki
579b0d9c5b bcm53xx: add support for Buffalo WZR-600DHP2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42925
 2014-10-15 07:14:13 +00:00
Rafał Miłecki
96a33c0dd7 bcm53xx: fix Asus RT-N18U support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42924
 2014-10-15 07:12:46 +00:00
Rafał Miłecki
5a03d0c931 bcm53xx: fix hangs in PCIe2 host driver 
Accessing CFG regs with no card present results in SoC hang.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42895
 2014-10-14 08:06:15 +00:00
Rafał Miłecki
540a6a45e4 bcm53xx: add temp bcma workaround that allows debugging 
This way we will get logs if case of hang/crash in bcma or related code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42894
 2014-10-14 05:31:54 +00:00
Rafał Miłecki
78be7225c3 bcm53xx: prepare to support Asus RT-N18U 
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42864
 2014-10-09 16:36:51 +00:00
Rafał Miłecki
9473673ae3 bcm53xx: add support for Buffalo WZR-1750DHP 
Let's generate a simple TRX file as we can't get encrypted one.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42863
 2014-10-09 16:36:05 +00:00
Rafał Miłecki
2818493e82 bcm53xx: add Netgear R6300 V2 LEDs and buttons 
Thanks tusc (our forum user) for checking GPIOs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42827
 2014-10-06 21:33:17 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
 2014-10-05 20:17:19 +00:00
Rafał Miłecki
7436b17075 bcm53xx: build R6250 firmware with "Other Regions" region 
This prevents vendor firmware from warning about incompatible region.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42754
 2014-10-03 10:40:12 +00:00
Rafał Miłecki
66922082ed bcm53xx: early support for Netgear R6300 V2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42743
 2014-10-02 19:30:08 +00:00
Rafał Miłecki
28301ea0b1 bcm53xx: early buttons support (without interrupts) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42718
 2014-10-02 12:05:58 +00:00
Rafał Miłecki
bd12c49473 bcm53xx: backport bcma RFC patch that fixes LEDs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42717
 2014-10-02 10:42:30 +00:00
Rafał Miłecki
01ab343779 bcm53xx: support devices with more (13+) partitions 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42716
 2014-10-02 09:51:54 +00:00
Rafał Miłecki
bbae0f7df0 bcm53xx: select LEDs support by default 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42715
 2014-10-02 05:54:18 +00:00
Rafał Miłecki
1421516e65 bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42711
 2014-10-01 13:38:50 +00:00
Rafał Miłecki
59b965194d kernel: update bcma to the tag master-2014-09-30 (wireless-next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42710
 2014-10-01 13:37:36 +00:00
Rafał Miłecki
26e85084b5 bcm53xx: rename BCM5301X DTS patch to match upstream order 
SVN-Revision: 42708
 2014-10-01 07:59:03 +00:00
Hauke Mehrtens
a6616a6e48 bcm53xx: activate some workarounds for errors in the Cortex-A9 
BCM4708 uses a Cortex-A9 rev r3p0 and a L2C-310 rev r3p2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42690
 2014-09-28 18:03:33 +00:00
Rafał Miłecki
8e525a43b4 kernel: update bcma to the tag master-2014-09-26 (wireless-next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42672
 2014-09-27 07:49:48 +00:00
Rafał Miłecki
747fd7871c bcm53xx: add a patch that fixes booting problems 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42659
 2014-09-24 21:08:17 +00:00
Rafał Miłecki
f036f5801f bcm53xx: image: use IMG_PREFIX for chk images 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42649
 2014-09-22 18:11:09 +00:00
Rafał Miłecki
23a07c6d18 bcm53xx: image: make filesystem a suffix for TRX files 
This makes TRX files more /compatible/ with firmware files (e.g. CHK).
This will allow us to put some TRX files in BIN_DIR if we need to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42646
 2014-09-22 09:16:20 +00:00
Rafał Miłecki
fd515112db bcm53xx: image: document arguments of various functions 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42645
 2014-09-22 08:37:18 +00:00
Rafał Miłecki
5f7be0ebf4 bcm53xx: image: rework Makefile and merge some functions 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42644
 2014-09-22 08:04:26 +00:00
Hauke Mehrtens
182e1dbcd4 bcm53xx: activate vfpv3 support 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42642
 2014-09-21 21:58:29 +00:00
Hauke Mehrtens
47aefcc563 bcm53xx: add nand flash driver 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42641
 2014-09-21 21:58:02 +00:00
Hauke Mehrtens
2c6e0e0ae0 bcm53xx: update patches adding bcma support 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42640
 2014-09-21 21:57:17 +00:00
Hauke Mehrtens
c977fad4fd bcm53xx: add fixtrx 
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42639
 2014-09-21 21:56:31 +00:00
Rafał Miłecki
223a309c3c bcm53xx: add support for GPIOs 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42638
 2014-09-21 21:18:30 +00:00
Rafał Miłecki
2468f9201f bcm53xx: rename console fixing patch 
This squeezes BCM5301X patches.

SVN-Revision: 42637
 2014-09-21 21:02:38 +00:00
Hauke Mehrtens
9434dfee87 bcm53xx: fix early serial console 
This device actually has a 8250 serial with a shift of 0.
Tested this on a BCM4708.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42538
 2014-09-14 19:22:49 +00:00
Rafał Miłecki
7cd532623e kernel: update bcma to the tag master-2014-09-11 (wireless-next) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42537
 2014-09-14 17:31:13 +00:00
Hauke Mehrtens
180ee041fa bcm53xx: select nvram package by default 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42522
 2014-09-13 20:28:44 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18 
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
 2014-09-10 21:40:19 +00:00
Hauke Mehrtens
8313b329c6 kernel: add bcma patches sent upstream but not pushed yet 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42448
 2014-09-08 19:50:53 +00:00
Hauke Mehrtens
e030c50502 kernel: update bcma to the version from wireless-testing master-2014-09-04 tag 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42447
 2014-09-08 19:50:11 +00:00
Hauke Mehrtens
823659f458 bcm53xx: update bcma device tree intergeneration and fix nvram parsing 
This fixes lots of sparse and checkpatch errors and extends the
documentation.

This also fixes a problem in the nvram parser, it now detects the
correct nvram on my Netgear R6250.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42272
 2014-08-24 15:57:49 +00:00
Hauke Mehrtens
cc3545d165 bcm53xx: add bcm53xxspiflash driver for SPI flashes 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42260
 2014-08-21 21:11:04 +00:00
Hauke Mehrtens
b118879cc3 bcm53xx: backport more spi-nor patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42259
 2014-08-21 21:10:29 +00:00
Hauke Mehrtens
f66a0912f7 bcm53xx: add SPI controller driver 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42223
 2014-08-19 20:14:06 +00:00
Hauke Mehrtens
bcb36cd494 bcm53xx: backport spi nor code form kernel v3.17-rc1. 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42222
 2014-08-19 20:12:36 +00:00
Hauke Mehrtens
a8bdf2f1e0 kernel: update bcma to code from v3.17-rc1 
This is needed for some new patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42221
 2014-08-19 20:06:24 +00:00
Hauke Mehrtens
4a9acacf53 kernel: 3.14: update bcm47xxpart 
It it used by brcm47xx and bcm53xx targets, so put patches in generic.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42212
 2014-08-18 21:57:54 +00:00
Hauke Mehrtens
32b3f9cdc6 brcm47xx/bcm53xx: improve description 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42204
 2014-08-18 20:29:26 +00:00
Hauke Mehrtens
76866d42ac bcm53xx: remove kernel 3.10 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42203
 2014-08-18 20:28:53 +00:00
Hauke Mehrtens
3c3b3dd41d bcm53xx: add b43 wifi support 
Now it is possible to use b43 wifi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42143
 2014-08-11 20:25:26 +00:00
Hauke Mehrtens
1d14e7ef1b bcm53xx: remove BCM4360 from PCI ids 
bcma does not support this card and b43 hangs when probing this card.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42142
 2014-08-11 20:24:45 +00:00
Luka Perkov
dd8d729096 kernel: update 3.14 to 3.14.16 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
 2014-08-08 13:38:22 +00:00
Hauke Mehrtens
69c403c234 bcm53xx: update to kernel 3.14 
Use kernel 3.14 by default and refresh the patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41913
 2014-07-31 21:44:41 +00:00
Hauke Mehrtens
350765676e bcm53xx: add restart support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41912
 2014-07-31 21:43:40 +00:00
Hauke Mehrtens
0d3690a202 kernel: update bcma and ssb to version master-2014-07-22 
This is a backport of bcma and ssb from wireless-tesing/master tag
master-2014-07-22.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41804
 2014-07-22 21:40:41 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
 2014-07-21 18:42:06 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 41776
 2014-07-20 17:31:11 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44 
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
 2014-06-26 13:47:42 +00:00
Hauke Mehrtens
cdc7ea3337 bcm53xx: add support for the PCIe controller 
This patch adds support for the PCIe controller
In addition to the PCIe controller a sprom is now provided by a device
tree driver to bcma from some nvram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40880
 2014-05-29 19:25:40 +00:00
Hauke Mehrtens
1c2dbe4e94 bcm53xx: add default config for switch 
This scripts adds a default config for the switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40565
 2014-04-23 22:02:18 +00:00
Hauke Mehrtens
d89aa2c3d6 bcm53xx: add initial support for kernel 3.14 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40564
 2014-04-23 21:53:50 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
 2014-04-12 11:59:07 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Hauke Mehrtens
b75a9b04df bcm53xx: update the bcm53xx patches 
This does not add any new features, just some changes to the patches
and a first try to use dt to set the irqs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39466
 2014-02-04 23:00:55 +00:00
Hauke Mehrtens
f491623c37 kernel: bgmac: update bgmac to a version from kernel 3.14-rc1 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39465
 2014-02-04 22:55:23 +00:00
Hauke Mehrtens
e0d4a548fb kernel: bcma: update bcma to a version from kernel 3.14-rc1 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39463
 2014-02-04 22:53:52 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
 2014-01-26 11:30:34 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
 2014-01-11 16:06:37 +00:00
Hauke Mehrtens
e0027ed4ab bcm53xx: make the l2x0 L2 cache controller work 
This fixes the DMA problems with the Ethernet driver.
This also updates some other parts of the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39203
 2014-01-04 23:46:44 +00:00
Hauke Mehrtens
2bc9700c0d bcm53xx: update the ethernet core hacks 
The PHY always says there is no link
Instead of doing this dma sync a mdelay does the same trick and it is as unreliable.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39202
 2014-01-04 18:27:09 +00:00
Hauke Mehrtens
5a55ace3b8 kernel: bgmac: update the driver patches to a version submitted for mainline kernel. 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39201
 2014-01-04 18:25:05 +00:00
Hauke Mehrtens
bc3d934148 kernel: bgmac: update patches 
This updates the bgmac backport patch to the current upstream version
and adds some more patches mostly for BCM4707.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39165
 2013-12-26 23:22:31 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
 2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
 2013-12-01 09:59:53 +00:00
Imre Kaloz
5de876bc78 there's no such thing as a soft fpu, this target should be fine without these 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38940
 2013-11-29 10:25:43 +00:00
Hauke Mehrtens
a3752801df bcm53xx: this ARM SoC does not have a FPU, use soft float. 
model name      : ARMv7 Processor rev 0 (v7l)
Features        : swp half thumb fastmult edsp tls

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38796
 2013-11-13 22:26:08 +00:00
Hauke Mehrtens
aa790ea61f bcm53xx: make bgmac work 
This makes bgmac work without sprom and refreshed the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38715
 2013-11-11 00:15:00 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
 2013-11-05 08:25:45 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
 2013-10-23 12:51:05 +00:00
Hauke Mehrtens
81e2f00367 kernel: update kernel to 3.10.15 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
 2013-10-13 19:28:29 +00:00
Hauke Mehrtens
125fc703bb kernel: bgmac: move other bgmac patches to generic 
The bgmac driver will be used on the brcm47xx and the bcm53xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38289
 2013-10-02 22:25:26 +00:00
Hauke Mehrtens
06c8b90ebf kernel: bgmac: move bgmac patches already applied in mainline kernel to generic 
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38288
 2013-10-02 22:24:01 +00:00
Gabor Juhos
9c8a5ef115 kernel: update 3.10 to 3.10.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
 2013-09-27 07:19:21 +00:00
Felix Fietkau
c8609ab4f8 build: unify arm target cflags 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
 2013-09-26 17:53:20 +00:00
Hauke Mehrtens
6910cb4d6f bcm53xx: bgmac: use srab switch driver 
use the srab switch driver on these SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38200
 2013-09-25 21:49:12 +00:00
Hauke Mehrtens
0bdc137636 bcm53xx: update bgmac driver 
Update the bgmac driver with the patches already used for bcm47xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38199
 2013-09-25 21:47:25 +00:00
Hauke Mehrtens
c75a970337 kernel: b53: add Register Access Bridge Registers (SRAB) interface 
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38198
 2013-09-25 21:44:28 +00:00
Gabor Juhos
554772a665 kernel: update 3.10 to 3.10.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
 2013-09-15 16:00:41 +00:00
Hauke Mehrtens
614e8f44bd kernel: update bcma and ssb to wireless-testing master-2013-09-09 
SVN-Revision: 37957
 2013-09-12 22:03:45 +00:00
Gabor Juhos
d120ec18b2 kernel: update 3.10 to 3.10.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
 2013-09-02 19:12:54 +00:00
Gabor Juhos
043edd8074 kernel: update 3.10 to 3.10.9 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
 2013-08-23 17:31:04 +00:00
Felix Fietkau
28d03a9983 kernel: update remaning platforms accidentally left out of r37617 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
 2013-07-30 08:00:25 +00:00
Hauke Mehrtens
ad59c4e646 bcm53xx: compile b53 switch driver 
SVN-Revision: 37587
 2013-07-28 22:14:55 +00:00
Hauke Mehrtens
1377916ea7 bcm53xx: update patches 
This reorders the patchs and adds some new ones.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37586
 2013-07-28 22:13:52 +00:00
Hauke Mehrtens
333252e493 bcm53xx: use clocksource patch as it was committed upstream 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37585
 2013-07-28 21:22:50 +00:00
Hauke Mehrtens
3e8c39f239 bcm53xx: add initial bgmac patches 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37584
 2013-07-28 21:20:15 +00:00
Hauke Mehrtens
24628e4ce7 bcm53xx: activate pci and usb in kernel config 
This is not working, just compiling

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37583
 2013-07-28 21:10:42 +00:00
Gabor Juhos
e9688455f6 kernel: update 3.10 to 3.10.3 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
 2013-07-26 07:19:58 +00:00
Gabor Juhos
ef944dcb85 kernel: update 3.10 to 3.10.2 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
 2013-07-22 15:31:13 +00:00
Gabor Juhos
187a69c631 linux: move more ARM_ERRATA symbols to the generic config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37470
 2013-07-20 07:43:54 +00:00
Gabor Juhos
c8933c968f linux: remove duplicated 3.10 symbols from target config files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37467
 2013-07-20 07:21:52 +00:00
Jonas Gorski
b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
 2013-07-19 22:58:01 +00:00
Hauke Mehrtens
06accca1d7 kernel: update to kernel 3.10.1 and refresh patches 
SVN-Revision: 37275
 2013-07-13 22:45:09 +00:00
Hauke Mehrtens
9e9261a718 bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs 
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37268
 2013-07-12 13:46:27 +00:00