KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22084 commits 3 branches 0 tags 154 MiB
Commit graph

545 commits

Author SHA1 Message Date
Gabor Juhos
9cde29f1a7 ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN 
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 30434
 2012-02-11 15:11:36 +00:00
Gabor Juhos
59b474732c ramips: rt305x: merge duplicated mac address setup 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30433
 2012-02-11 15:11:34 +00:00
Gabor Juhos
7298ef2456 ramips: rt305x: add profile for the Belkin f5d8235v2 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30432
 2012-02-11 15:11:32 +00:00
Gabor Juhos
0430194cc3 ramips: fix compiler warning in prom.c 
SVN-Revision: 30424
 2012-02-10 17:38:46 +00:00
Gabor Juhos
44ed690cb3 ramips: change vlan_config for the ALFA W502U board 
This change moves the WAN port into a separate VLAN.

SVN-Revision: 29969
 2012-01-31 18:34:10 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards 
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
 2012-01-26 10:44:23 +00:00
Gabor Juhos
02e77c6ae1 ramips: generate sysupgrade image for the ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29884
 2012-01-24 11:48:48 +00:00
Gabor Juhos
944c8aacdb ramips: add user-space support for ALL0256N 
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29883
 2012-01-24 11:48:47 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
 2012-01-24 11:48:45 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates 
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
 2012-01-23 10:23:32 +00:00
Gabor Juhos
809fe38e41 ramips fix f5d8235-v1 diag LED support 
SVN-Revision: 29857
 2012-01-22 18:11:39 +00:00
Gabor Juhos
e9d8deaaed ramips: add sysled and sysupgrade to wr512-3gn 
Patch from #10035.

SVN-Revision: 29847
 2012-01-22 13:43:23 +00:00
Gabor Juhos
557cf076b4 ramips: sysupgrade for ESR-9753 
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29824
 2012-01-20 10:49:26 +00:00
John Crispin
a2708d11e8 ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 29762
 2012-01-17 11:23:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
 2011-12-14 20:51:26 +00:00
Gabor Juhos
43bd4c6ad1 ramips: fix mac addresses on the DIR-300/600 boards 
SVN-Revision: 29471
 2011-12-06 20:06:08 +00:00
Gabor Juhos
5ef6ec4a31 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

SVN-Revision: 29454
 2011-12-05 17:27:07 +00:00
Gabor Juhos
750d560767 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29453
 2011-12-05 17:27:06 +00:00
Gabor Juhos
b5d7b359b2 ramips: use ramips_get_mac_* functions in the preinit script 
SVN-Revision: 29452
 2011-12-05 17:27:04 +00:00
Gabor Juhos
4d5b940e66 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
SVN-Revision: 29451
 2011-12-05 17:27:03 +00:00
Gabor Juhos
cc853acb3a ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
SVN-Revision: 29450
 2011-12-05 17:27:02 +00:00
Gabor Juhos
b1137d48a4 ramips: fix network configuration setup 
SVN-Revision: 29448
 2011-12-05 16:54:48 +00:00
Gabor Juhos
56c9b50006 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29422
 2011-12-04 15:24:57 +00:00
Gabor Juhos
3fccc3b376 ramips: enable sysupgrade on the RT-N15 board 
SVN-Revision: 29393
 2011-12-01 22:48:58 +00:00
Gabor Juhos
4b2d1c3ad3 ramips: wrap long line in platform upgrade script 
SVN-Revision: 29392
 2011-12-01 22:48:57 +00:00
Gabor Juhos
d622263588 ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
 2011-12-01 22:48:55 +00:00
Gabor Juhos
3a9e02fa41 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
 2011-12-01 22:48:54 +00:00
Gabor Juhos
fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

SVN-Revision: 29389
 2011-12-01 22:48:53 +00:00
Gabor Juhos
80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults 
SVN-Revision: 29387
 2011-12-01 22:48:51 +00:00
Gabor Juhos
4f6c58adac ramips: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29386
 2011-12-01 22:48:48 +00:00
Gabor Juhos
569d8de6d6 ramips: simplify uci-defaults/network script 
SVN-Revision: 29383
 2011-12-01 22:48:45 +00:00
Gabor Juhos
66c9a351dd ramips: setup mac and network interfaces from separate functions 
SVN-Revision: 29382
 2011-12-01 22:48:43 +00:00
Gabor Juhos
62d18e9f9a ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
 2011-12-01 22:48:42 +00:00
Gabor Juhos
2dd79d55c7 ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
 2011-12-01 22:48:41 +00:00
Gabor Juhos
7c678e7511 ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

SVN-Revision: 29379
 2011-12-01 22:48:39 +00:00
Gabor Juhos
2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
 2011-12-01 22:48:38 +00:00
Gabor Juhos
295e04084c ramips: setup bc2 mac addresses from the generic network script 
SVN-Revision: 29377
 2011-12-01 22:48:37 +00:00
Gabor Juhos
02f95d4fb3 ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
 2011-12-01 22:48:35 +00:00
Vasilis Tsiligiannis
17ccd4aec4 rt305x: Create factory image for Fonera 2.0n 
SVN-Revision: 28689
 2011-10-31 09:23:44 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
 2011-10-24 21:49:36 +00:00
Gabor Juhos
18452a753b ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
 2011-10-24 21:49:32 +00:00
Gabor Juhos
68a01c0180 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
 2011-10-24 21:49:31 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board 
SVN-Revision: 28078
 2011-08-22 20:41:49 +00:00
Gabor Juhos
4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c 
SVN-Revision: 28077
 2011-08-22 20:41:48 +00:00
Gabor Juhos
462ca22e9c ramips: sort Makefile entries 
SVN-Revision: 28076
 2011-08-22 20:41:47 +00:00
Gabor Juhos
d50494f3bb ramips: sort RAMIPS_MACH_* defines 
SVN-Revision: 28075
 2011-08-22 20:41:45 +00:00
Gabor Juhos
90686691ce ramips: fix wireless firmware extraction for wr512-3gn 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
 2011-08-22 18:08:45 +00:00
Gabor Juhos
f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries 
SVN-Revision: 28054
 2011-08-19 15:55:12 +00:00
Gabor Juhos
6720025497 ramips: rt305x: fix wr512n image generation 
SVN-Revision: 28053
 2011-08-19 15:55:11 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
 2011-08-19 15:55:10 +00:00
Gabor Juhos
46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
 2011-08-19 15:55:08 +00:00
Gabor Juhos
05209860da ramips: fix wireless on Belkin F5D8235 v2 
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
 2011-08-19 15:55:07 +00:00
Gabor Juhos
f8ab604eb6 ramips: fix typo in default packages 
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
 2011-08-19 15:55:05 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Gabor Juhos
ace8ce0845 ramips: use maccalc instead of hexdump + sed 
SVN-Revision: 28007
 2011-08-15 19:00:23 +00:00
Gabor Juhos
bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board 
SVN-Revision: 28006
 2011-08-15 18:55:53 +00:00
Gabor Juhos
17c041cd0b ramips: add maccalc to the default package list 
SVN-Revision: 28005
 2011-08-15 18:55:52 +00:00
Gabor Juhos
67e480971c ramips: add input drivers to the default package list 
SVN-Revision: 28003
 2011-08-15 18:55:50 +00:00
Gabor Juhos
35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B 
SVN-Revision: 28002
 2011-08-15 18:55:48 +00:00
Gabor Juhos
75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs 
SVN-Revision: 28000
 2011-08-15 14:12:00 +00:00
Gabor Juhos
e1b176de82 ramips: rt305x: add some USB modules to the default profile 
SVN-Revision: 27999
 2011-08-15 14:11:58 +00:00
Gabor Juhos
169d68c98c ramips: rt305x: add dwc_otg driver 
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
 2011-08-15 14:11:55 +00:00
Gabor Juhos
0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards 
SVN-Revision: 27996
 2011-08-15 14:11:52 +00:00
Gabor Juhos
addc86fdbd ramips: rt305x: add dwc_otg platform device 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
 2011-08-15 14:11:51 +00:00
Gabor Juhos
6ef87ff5e6 ramips: sync kernel config 
SVN-Revision: 27993
 2011-08-15 14:11:48 +00:00
Gabor Juhos
4ee4fc9725 ramips: load the input drivers during preinit 
SVN-Revision: 27992
 2011-08-15 14:11:47 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B 
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
 2011-08-15 14:11:45 +00:00
Gabor Juhos
1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
 2011-08-15 14:11:43 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board 
SVN-Revision: 27813
 2011-07-28 10:56:32 +00:00
Gabor Juhos
437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board 
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
 2011-07-28 10:56:30 +00:00
Gabor Juhos
7193f29d96 ramips: rt305x: enable M25P80 driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
 2011-07-28 10:56:28 +00:00
Gabor Juhos
c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
 2011-07-28 10:56:27 +00:00
Gabor Juhos
57122e7ccc ramips: add SPI controller driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
 2011-07-28 10:56:25 +00:00
Gabor Juhos
3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards 
SVN-Revision: 27808
 2011-07-28 10:56:24 +00:00
Gabor Juhos
857c1028ac ramips: rt305x: change machine id for DIR-300 
SVN-Revision: 27807
 2011-07-28 10:56:22 +00:00
Gabor Juhos
42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1 
SVN-Revision: 27806
 2011-07-28 10:56:21 +00:00
Gabor Juhos
39689b648f ramips: rt305x: sort Kconfig/Makefile entries 
SVN-Revision: 27805
 2011-07-28 10:56:19 +00:00
Gabor Juhos
32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards 
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
 2011-07-28 10:56:18 +00:00
Gabor Juhos
57663ce25b ramips: fix PWH2004 image generation 
SVN-Revision: 27803
 2011-07-28 10:56:15 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Gabor Juhos
abb1ca01a7 ramips: fix buffalo image generation 
SVN-Revision: 27495
 2011-07-06 16:46:33 +00:00
Gabor Juhos
1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

SVN-Revision: 27478
 2011-07-06 08:05:00 +00:00
Gabor Juhos
d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
SVN-Revision: 27477
 2011-07-06 08:04:55 +00:00
Gabor Juhos
2cc346b8e0 ramips: create tftp image for the WHR-G300N board 
SVN-Revision: 27476
 2011-07-06 08:04:54 +00:00
Gabor Juhos
0dc18d8586 ramips: create factory image for the WHR-G300N board 
SVN-Revision: 27474
 2011-07-06 08:04:52 +00:00
Gabor Juhos
e9c8218375 ramips: create factory image for DIR-300-B1 
SVN-Revision: 27439
 2011-07-04 06:48:45 +00:00
Gabor Juhos
6e7b802297 ramips: merge 2.6.39 patches 
SVN-Revision: 27399
 2011-07-03 15:02:10 +00:00
Gabor Juhos
646f64d389 ramips: remove 2.6.37 stuff 
SVN-Revision: 27398
 2011-07-03 15:02:09 +00:00
Gabor Juhos
2fc6be00f4 ramips: switch to 2.6.39.2 
SVN-Revision: 27397
 2011-07-03 15:02:07 +00:00
Gabor Juhos
0fde070cf9 ramips: add 2.6.39 support 
Based on the patches from #9625

SVN-Revision: 27396
 2011-07-03 15:02:06 +00:00
Gabor Juhos
c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver 
SVN-Revision: 27393
 2011-07-03 15:02:01 +00:00
Gabor Juhos
3334d0604e ramips: specify eeprom file name on RT305X 
SVN-Revision: 27392
 2011-07-03 15:02:00 +00:00
Gabor Juhos
f53cc4c439 ramips: specify eeprom file name on RT288X 
SVN-Revision: 27391
 2011-07-03 15:01:59 +00:00
Gabor Juhos
521e495f4b ramips: add all supported boards to lib/ramips.sh 
SVN-Revision: 27389
 2011-07-03 15:01:56 +00:00
Gabor Juhos
6f54df889a ramips: check the size of the uImage in image generation 
SVN-Revision: 27388
 2011-07-03 15:01:55 +00:00
Gabor Juhos
575a5286c8 ramips: use lowercase partiion names on the WCR150GN board 
SVN-Revision: 27387
 2011-07-03 15:01:53 +00:00
Gabor Juhos
31facf0b75 ramips: use different partition names in the DIR-300-B1 image 
SVN-Revision: 27386
 2011-07-03 15:01:52 +00:00
Gabor Juhos
dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252) 
SVN-Revision: 27385
 2011-07-03 15:01:51 +00:00
Gabor Juhos
f1cf43d468 ramips: update partition map for DIR-300-B1 
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
 2011-07-03 15:01:49 +00:00
Gabor Juhos
641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions 
SVN-Revision: 27383
 2011-07-03 15:01:48 +00:00
Gabor Juhos
381d7f05af ramips: fix a section mismatch warning 
SVN-Revision: 27382
 2011-07-03 15:01:46 +00:00
Gabor Juhos
16ad91d69f ramips: remove unused include from the common GPIO code 
SVN-Revision: 27381
 2011-07-03 15:01:44 +00:00
Gabor Juhos
c9f3e7082f ramips: disable watchdog on sysupgrade 
SVN-Revision: 27380
 2011-07-03 15:01:43 +00:00
Gabor Juhos
e70e6f6848 ramips: swap target check in image generation 
SVN-Revision: 27379
 2011-07-03 15:01:42 +00:00
Gabor Juhos
affb57ee27 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
 2011-07-03 15:01:41 +00:00
Gabor Juhos
3099ffe414 ramips: set cp0_perfcount_irq for RT305X 
SVN-Revision: 27377
 2011-07-03 15:01:40 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN 
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
 2011-04-04 08:43:07 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Gabor Juhos
87f5872f35 ramips: remove 2.6.36 stuff 
SVN-Revision: 26329
 2011-03-27 19:20:06 +00:00
Gabor Juhos
90d37adb8d ramips: switch to 2.6.37 
SVN-Revision: 26328
 2011-03-27 19:20:04 +00:00
Gabor Juhos
1844ea6c7b ramips: UPF_FIXED_TYPE must be set for the serial ports 
SVN-Revision: 26327
 2011-03-27 19:20:03 +00:00
Gabor Juhos
9ef4785364 ramips: define GPIO chips separately for each SoCs 
SVN-Revision: 26326
 2011-03-27 19:19:59 +00:00
Gabor Juhos
37d6d88869 ramips: move GPIO definitions into a separate header file 
SVN-Revision: 26325
 2011-03-27 19:19:57 +00:00
Gabor Juhos
251a367fb4 ramips: setup GPIO chip functions on the fly 
SVN-Revision: 26324
 2011-03-27 19:19:51 +00:00
Gabor Juhos
b03f2dfcee ramips: use separate register base for GPIO chips 
SVN-Revision: 26323
 2011-03-27 19:19:48 +00:00
Gabor Juhos
8770359f17 ramips: fix dir-300 mtd layout 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 26322
 2011-03-27 19:19:45 +00:00
Gabor Juhos
f599459abb ramips: enable MDIO on the HW550-3G board 
SVN-Revision: 26321
 2011-03-27 19:19:41 +00:00
Gabor Juhos
d701a72760 ramips: add sysupgrade and status LED support for HW550-3G 
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26320
 2011-03-27 19:19:40 +00:00
Felix Fietkau
335877a2b3 global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance 
SVN-Revision: 26300
 2011-03-26 01:07:12 +00:00
Gabor Juhos
23518bb2e4 ramips: initial board support for Aztech HW550-3G 
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
 2011-03-13 16:34:52 +00:00
Florian Fainelli
45c9f5e75e update to kernel 2.6.36.4 
SVN-Revision: 25580
 2011-02-19 12:44:07 +00:00
Gabor Juhos
1c92e047c8 ramips: register watchdog device on the rt288x boards 
SVN-Revision: 25130
 2011-01-26 20:48:52 +00:00
Gabor Juhos
2b50cecea6 ramips: add watchdog device for RT288x 
SVN-Revision: 25129
 2011-01-26 20:48:50 +00:00
Gabor Juhos
764aa3fe9c ramips: register watchdog device on the rt305x boards 
SVN-Revision: 25128
 2011-01-26 20:48:47 +00:00
Gabor Juhos
42e36cf732 ramips: add watchdog device for RT305x 
SVN-Revision: 25127
 2011-01-26 20:48:46 +00:00
Gabor Juhos
16366feafb ramips: add watchdog driver 
SVN-Revision: 25126
 2011-01-26 20:48:41 +00:00
Gabor Juhos
f38367fcb4 ramips: implement clock API for RT288x 
SVN-Revision: 25125
 2011-01-26 20:48:39 +00:00
Gabor Juhos
b0ffa70248 ramips: implement clock API for RT305X 
SVN-Revision: 25124
 2011-01-26 20:48:35 +00:00
Gabor Juhos
f9e74383a9 ramips: remove extern and __init from function prototypes 
SVN-Revision: 25123
 2011-01-26 20:48:33 +00:00
Gabor Juhos
b99a637795 ramips: ramips_esw: fix typos 
Patch from #8577.

SVN-Revision: 24898
 2011-01-04 13:44:05 +00:00
Gabor Juhos
d2fdd1dbe1 ramips: remove 2.6.3[24] support 
SVN-Revision: 24562
 2010-12-14 08:00:31 +00:00
Gabor Juhos
1403850be1 ramips: switch to 2.6.36 
SVN-Revision: 24561
 2010-12-14 08:00:29 +00:00
Gabor Juhos
f9898e30fb ramips: handle OTG interrupt on the RT305x SoC 
SVN-Revision: 24560
 2010-12-14 08:00:25 +00:00
Felix Fietkau
5a351509aa base-files: use shutdown instead of stop when the system goes down (patch by tripolar) 
SVN-Revision: 24540
 2010-12-13 08:01:21 +00:00
Gabor Juhos
502d21dc2a ramips: ramips_esw: add more definitions 
SVN-Revision: 24340
 2010-12-08 10:15:33 +00:00
Gabor Juhos
bf58ef7c6d ramips: ramips_esw: add helper function to set pvid 
SVN-Revision: 24339
 2010-12-08 10:15:28 +00:00
Gabor Juhos
692d379b50 ramips: ramips_esw: add helper function to set vlan members 
SVN-Revision: 24338
 2010-12-08 10:15:25 +00:00
Gabor Juhos
f7c3f91074 ramips: ramips_esw: add helper function to set VLAN id 
SVN-Revision: 24337
 2010-12-08 10:15:22 +00:00
Gabor Juhos
0d2ad7a816 ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function 
SVN-Revision: 24336
 2010-12-08 10:15:16 +00:00
Gabor Juhos
7b878dde4b ramips: ramips_esw: use rt305x_esw prefix in function names 
SVN-Revision: 24335
 2010-12-08 10:15:14 +00:00
Gabor Juhos
0fcedc7bda ramips: ramips_esw: coding style cleanup 
SVN-Revision: 24334
 2010-12-08 10:15:12 +00:00
Gabor Juhos
48e6a31812 ramips: ramips_esw: add defines for switch register offsets 
SVN-Revision: 24333
 2010-12-08 10:15:07 +00:00
Gabor Juhos
74c13f06df ramips: ramips_esw: don't touch GPIO_PURPOSE register 
It must have been set by the board initialization code.

SVN-Revision: 24332
 2010-12-08 10:15:04 +00:00
Gabor Juhos
3b9a6adc7d ramips: ramips_esw: convert it to be a platform driver 
SVN-Revision: 24331
 2010-12-08 10:15:00 +00:00
Gabor Juhos
889729df01 ramips: ramips_esw: move hardware initialization into a separate function 
SVN-Revision: 24330
 2010-12-08 10:14:58 +00:00
Gabor Juhos
8957f39064 ramips: ramips_esw: use a private structure for the functions 
SVN-Revision: 24329
 2010-12-08 10:14:54 +00:00
Gabor Juhos
0449d92dd7 ramips: add support for 2.6.36 
SVN-Revision: 24270
 2010-12-05 20:14:38 +00:00
Gabor Juhos
01a5cb48c8 ramips: default profile fix 
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24269
 2010-12-05 20:14:35 +00:00
Gabor Juhos
47dd3b9fea ramips: use tabs instead of spaces in mach-f5d8235-v2.c 
SVN-Revision: 24268
 2010-12-05 20:14:30 +00:00
Gabor Juhos
21c8d63505 ramips: add support for Belkin F5D8235 v2 board 
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
 2010-11-24 10:01:23 +00:00
Gabor Juhos
64b16b9f34 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24124
 2010-11-24 10:01:18 +00:00
Gabor Juhos
624cfc5c91 ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
 2010-11-24 10:01:16 +00:00
Gabor Juhos
f833e399f2 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24122
 2010-11-24 10:01:12 +00:00
Gabor Juhos
c6e4124855 ramips: Remove unnecessary skb_put 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24121
 2010-11-24 10:01:08 +00:00
Gabor Juhos
69355ee10e ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 23243
 2010-10-05 14:10:34 +00:00
Imre Kaloz
5f9a6a5431 upgrade kernel versions to the latest stable ones 
SVN-Revision: 23219
 2010-10-04 10:40:41 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
 2010-09-27 14:43:34 +00:00
Gabor Juhos
39c57eeb31 ramips: allow USB 
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

SVN-Revision: 23128
 2010-09-27 14:42:07 +00:00
Hauke Mehrtens
09e05d833d kernel: update kernel version to 2.6.34.5 
SVN-Revision: 22759
 2010-08-22 13:26:06 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board 
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
 2010-08-15 09:43:07 +00:00
Florian Fainelli
781c091ea5 fix jffs2 64k and 128k images overwrite each other 
When trying to build images with jffs2 filesystem for ramips platform
there is only one jffs2 image produced instead of two (64k and 128k).

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22435
 2010-07-31 11:42:17 +00:00
Gabor Juhos
1ca67cba7f ramips: enable ethernet driver for rt288x 
SVN-Revision: 22214
 2010-07-15 19:45:49 +00:00
Gabor Juhos
2e45ce264d ramips: register ethernet device on the RT-N15 
SVN-Revision: 22213
 2010-07-15 19:45:46 +00:00
Gabor Juhos
c2ebadc504 ramips: add generic ethernet device for the RT288x 
SVN-Revision: 22212
 2010-07-15 19:45:43 +00:00
Gabor Juhos
0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver 
SVN-Revision: 22211
 2010-07-15 19:45:40 +00:00
Gabor Juhos
d14e9e706e ramips: Fix bridging in ramips ethernet driver 
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 22172
 2010-07-13 16:52:07 +00:00
Gabor Juhos
27375c5139 ramips: protect GPIO register access with a spinlock 
SVN-Revision: 22171
 2010-07-13 16:52:04 +00:00
Gabor Juhos
9ee8b1f8c6 ramips: sync kernel config 
SVN-Revision: 22170
 2010-07-13 16:52:02 +00:00
Hauke Mehrtens
e2ce2feedb kernel: update to kernel 2.6.34.1 
SVN-Revision: 22118
 2010-07-10 22:39:52 +00:00
Alexandros C. Couloumbis
cd2069a57c fix commit r21994 (thanks juhosg) 
SVN-Revision: 21995
 2010-06-30 19:46:45 +00:00
Alexandros C. Couloumbis
0409c64e34 fix commit r21993 
SVN-Revision: 21994
 2010-06-30 19:35:12 +00:00
Gabor Juhos
2dfcdb9465 generic: merge mips multi machine update to generic patches for 2.6.34 
SVN-Revision: 21675
 2010-06-04 19:09:52 +00:00
Gabor Juhos
383bd396fa generic: merge mips multi machine update to generic patches for 2.6.32 
SVN-Revision: 21673
 2010-06-04 19:09:46 +00:00
John Crispin
971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set. 
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
 2010-05-31 11:57:32 +00:00
Daniel Dickinson
ba2b75f710 ramips: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ramips.sh was sourced 
SVN-Revision: 21635
 2010-05-30 03:21:00 +00:00
Gabor Juhos
c24397b385 ramips: merge slab patch 
SVN-Revision: 21607
 2010-05-28 19:45:28 +00:00
Gabor Juhos
7ac21ada55 ramips: use COMMAND_LINE_SIZE directly 
SVN-Revision: 21606
 2010-05-28 19:45:24 +00:00
Gabor Juhos
178e4e9927 ramips: add missing 2.6.34 config files 
SVN-Revision: 21605
 2010-05-28 19:45:21 +00:00
Gabor Juhos
b86455a7ec ramips: refresh 2.6.34 patches 
SVN-Revision: 21604
 2010-05-28 19:45:16 +00:00
Gabor Juhos
fdf1561386 ramips: sync 2.6.32 config 
SVN-Revision: 21603
 2010-05-28 19:45:10 +00:00
John Crispin
0ab7d18462 update to 2.6.34, signed of by russiane39, thx 
SVN-Revision: 21573
 2010-05-26 15:53:05 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Alexandros C. Couloumbis
fdac9ae836 sync to kernel 2.6.32.12 
SVN-Revision: 21195
 2010-04-27 14:30:08 +00:00
Nicolas Thill
37b02afe6a package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names 
SVN-Revision: 21137
 2010-04-24 14:08:49 +00:00
Gabor Juhos
60cbdbb686 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
SVN-Revision: 21083
 2010-04-22 09:25:37 +00:00
Nicolas Thill
3162bc1ecf target/ramips: fix another typo from [20834] (closes: #7182) 
SVN-Revision: 21012
 2010-04-19 01:14:29 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files 
SVN-Revision: 20834
 2010-04-12 23:15:56 +00:00
Gabor Juhos
de18353622 ramips: nuke clocksource init patch 
SVN-Revision: 20802
 2010-04-11 17:47:30 +00:00
Gabor Juhos
b4bb5ebfaa ramips: generate sysupgrade images for the rt305x devices 
SVN-Revision: 20801
 2010-04-11 17:47:28 +00:00
Gabor Juhos
7581054e93 ramips: add sysupgrade support 
SVN-Revision: 20800
 2010-04-11 17:47:25 +00:00
Gabor Juhos
09aec474af ramips: add diag support 
SVN-Revision: 20799
 2010-04-11 17:47:23 +00:00
Gabor Juhos
2872bade69 ramips: enable image commandline hack and cmdline partition parsing 
SVN-Revision: 20798
 2010-04-11 17:47:20 +00:00
Gabor Juhos
af05b16c98 ramips: add default profiles 
SVN-Revision: 20797
 2010-04-11 17:47:17 +00:00
Gabor Juhos
0abc7e6d53 ramips: add wpad-mini to the default packages 
SVN-Revision: 20632
 2010-03-31 09:58:33 +00:00
Gabor Juhos
a423c3abee ramips: annotate device register function prototypes with __init 
SVN-Revision: 20627
 2010-03-31 08:40:28 +00:00
Gabor Juhos
a9f313edea ramips: register wifi device for the RT2880 based boards 
SVN-Revision: 20625
 2010-03-31 08:40:23 +00:00
Gabor Juhos
9f3d673dbc ramips: add wifi device for the RT2880 as well 
SVN-Revision: 20624
 2010-03-31 08:40:20 +00:00
Gabor Juhos
1c25cfcde0 ramips: register wifi device on the rt305x based boards 
SVN-Revision: 20616
 2010-03-30 21:24:10 +00:00
Gabor Juhos
ce2ac05602 ramips: sync kernel config 
SVN-Revision: 20614
 2010-03-30 21:24:05 +00:00
John Crispin
6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20599
 2010-03-30 12:04:05 +00:00
John Crispin
3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20596
 2010-03-30 10:06:05 +00:00
Gabor Juhos
e66a368bd1 kernel: update to 2.6.32.10 
SVN-Revision: 20444
 2010-03-26 10:45:25 +00:00
Felix Fietkau
2d305bdc23 the mips -ffreestanding patch has been unnecessary for a long time now, remove it 
SVN-Revision: 20149
 2010-03-11 18:48:50 +00:00
Nicolas Thill
e1863691d9 do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) 
SVN-Revision: 20136
 2010-03-11 09:50:11 +00:00
Hauke Mehrtens
0c7b285613 kernel: update to kernel 2.6.32.9 
SVN-Revision: 19890
 2010-02-28 10:16:47 +00:00
Travis Kemen
5c75e1dd02 update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolar 
SVN-Revision: 19591
 2010-02-12 01:12:11 +00:00
Imre Kaloz
825b37cc56 clean up handling of some kernel symbols 
SVN-Revision: 19581
 2010-02-11 09:33:16 +00:00
Imre Kaloz
0a52bc58f8 re-sort all target and subtarget config files 
SVN-Revision: 19580
 2010-02-11 08:55:15 +00:00
Gabor Juhos
1e4e3b21fb ramips: nuke 2.6.30 support 
SVN-Revision: 19466
 2010-01-31 17:56:41 +00:00
Gabor Juhos
bdc1565554 ramips: enable RTL8366SR driver for the RT288x devices 
SVN-Revision: 19465
 2010-01-31 17:56:38 +00:00
Gabor Juhos
4267623e2e ramips_eth: cleanup mac_address changing 
SVN-Revision: 19464
 2010-01-31 17:56:36 +00:00
Gabor Juhos
b16aaf5fac ramips_eth: update register offsets 
SVN-Revision: 19463
 2010-01-31 17:56:33 +00:00
Gabor Juhos
72b08b729a ramips_eth: pass sys_clk via platform_data 
SVN-Revision: 19462
 2010-01-31 17:56:30 +00:00
Gabor Juhos
9ab88ce62d ramips_eth: add helper functions to {ed,dis}able interrupts 
SVN-Revision: 19446
 2010-01-31 12:48:53 +00:00
Gabor Juhos
224edd2575 ramips_eth: remove unnecessary typecasts 
SVN-Revision: 19445
 2010-01-31 12:48:51 +00:00
Gabor Juhos
8aceaf96be ramips_eth: simplify tx_next computation 
SVN-Revision: 19444
 2010-01-31 12:48:48 +00:00
Gabor Juhos
21b06bd2c0 ramips_eth: simplify tx descriptor initialization 
SVN-Revision: 19443
 2010-01-31 12:48:46 +00:00
Gabor Juhos
d0fb66e3a4 ramips_eth: pass 'raeth_priv' struct directly to dma specific functions 
SVN-Revision: 19442
 2010-01-31 12:48:43 +00:00
Gabor Juhos
c9d8869d1b ramips: switch to 2.6.32 
SVN-Revision: 19441
 2010-01-31 12:48:41 +00:00
Gabor Juhos
f0be6ab20c ramips_eth: convert to use netdev_ops 
SVN-Revision: 19440
 2010-01-31 12:48:38 +00:00
Gabor Juhos
d37975f6b2 ramips_eth: fix invalid register writes 
SVN-Revision: 19417
 2010-01-30 15:26:02 +00:00
Gabor Juhos
43e1dd85c2 ramips_eth: move memset call out from the loop 
SVN-Revision: 19416
 2010-01-30 15:25:59 +00:00
Gabor Juhos
ea4ce3b6fd ramips_eth: header file cleanup 
SVN-Revision: 19415
 2010-01-30 15:25:57 +00:00
Gabor Juhos
67cd819da6 ramips_eth: coding style cleanup 
SVN-Revision: 19414
 2010-01-30 15:25:55 +00:00
Gabor Juhos
a4e85bbceb ramips: register gpio buttons on the Fonera 2.0N board 
SVN-Revision: 19413
 2010-01-30 15:25:52 +00:00
Gabor Juhos
8823482a02 ramips: register gpio buttons on the WHR-G300N board 
SVN-Revision: 19412
 2010-01-30 15:25:49 +00:00
Gabor Juhos
35f47a3654 ramips: register gpio buttons on the V22RW-2x2 board 
SVN-Revision: 19411
 2010-01-30 15:25:47 +00:00
Gabor Juhos
30a397fd5e ramips: register gpio buttons on the DIR-300 revB board 
SVN-Revision: 19410
 2010-01-30 15:25:44 +00:00
Gabor Juhos
f9b053e87f ramips: fix wrong base addresses for the RT288x 
SVN-Revision: 19409
 2010-01-30 15:25:41 +00:00
Gabor Juhos
8448caa6ad ramips: include 'linux/leds.h' from 'dev-gpio-leds.h' 
SVN-Revision: 19408
 2010-01-30 15:25:36 +00:00
Gabor Juhos
94c9590e91 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h 
SVN-Revision: 19407
 2010-01-30 15:25:33 +00:00
Gabor Juhos
55185915de ramips: cleanup WZR-AGL300NH board support file 
SVN-Revision: 19406
 2010-01-30 15:25:29 +00:00
Gabor Juhos
0530dd9849 ramips: register gpio-buttons on the RT-N15 board 
SVN-Revision: 19405
 2010-01-30 15:25:25 +00:00
Gabor Juhos
9327f02b7b ramips: add common gpio-buttons device 
SVN-Revision: 19404
 2010-01-30 15:25:20 +00:00
Gabor Juhos
4af1f533bb ramips: register rtl8366s device on the RT-N15 board 
SVN-Revision: 19403
 2010-01-30 15:25:16 +00:00
Gabor Juhos
e2dde81ead ramips: sanitize return value of ramips_gpio_get 
SVN-Revision: 19401
 2010-01-30 15:25:08 +00:00
Gabor Juhos
af9f40e60d ramips: update mips multi-machine stuff 
SVN-Revision: 19400
 2010-01-30 15:25:03 +00:00
Gabor Juhos
b34feab713 ramips: add preliminary support for 2.6.32 
SVN-Revision: 19343
 2010-01-26 09:57:38 +00:00
Gabor Juhos
c5ac3f64ab ramips: refresh patches 
SVN-Revision: 19342
 2010-01-26 09:57:34 +00:00
Gabor Juhos
03aa95b791 ramips: sync kernel config 
SVN-Revision: 19341
 2010-01-26 09:57:32 +00:00
Jo-Philipp Wich
6351d88e29 add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com> 
SVN-Revision: 19321
 2010-01-24 23:31:49 +00:00
Florian Fainelli
a47b8566a1 update to 2.6.30, refresh patches 
SVN-Revision: 18635
 2009-12-04 14:52:45 +00:00
Imre Kaloz
6b280112f2 some more Kconfig symbol move.. 
SVN-Revision: 18371
 2009-11-11 11:52:41 +00:00