openwrtv4/package/network/utils/iw/patches/001-nl80211_h_sync.patch

--- a/nl80211.h
+++ b/nl80211.h
@@ -10,6 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -328,7 +329,15 @@
  *	partial scan results may be available
  *
  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	intervals and certain number of cycles, as specified by
+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ *	scheduled scan will run in an infinite loop with the specified interval.
+ *	These attributes are mutually exculsive,
+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ *	If for some reason scheduled scan is aborted by the driver, all scan
+ *	plans are canceled (including scan plans that did not start yet).
  *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
  *	are passed, they are used in the probe requests.  For
  *	broadcast, a broadcast SSID must be passed (ie. an empty
@@ -1761,6 +1770,22 @@ enum nl80211_commands {
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ *	scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ *	Each scan plan defines the number of scan iterations and the interval
+ *	between scans. The last scan plan will always run infinitely,
+ *	thus it must not specify the number of iterations, only the interval
+ *	between scans. The scan plans are executed sequentially.
+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2130,6 +2155,13 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_REG_INDOOR,
 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+	NL80211_ATTR_SCHED_SCAN_PLANS,
+
+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3364,6 +3396,9 @@ enum nl80211_bss_scan_width {
  *	(not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
  *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+ *	was last updated by a received frame. The value is expected to be
+ *	accurate to about 10ms. (u64, nanoseconds)
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -3383,6 +3418,7 @@ enum nl80211_bss {
 	NL80211_BSS_CHAN_WIDTH,
 	NL80211_BSS_BEACON_TSF,
 	NL80211_BSS_PRESP_DATA,
+	NL80211_BSS_LAST_SEEN_BOOTTIME,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -4589,4 +4625,28 @@ enum nl80211_tdls_peer_capability {
 	NL80211_TDLS_PEER_WMM = 1<<2,
 };
 
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ *	seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ *	scan plan (u32). The last scan plan must not specify this attribute
+ *	because it will run infinitely. A value of zero is invalid as it will
+ *	make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ *	currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+	__NL80211_SCHED_SCAN_PLAN_INVALID,
+	NL80211_SCHED_SCAN_PLAN_INTERVAL,
+	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+	NL80211_SCHED_SCAN_PLAN_MAX =
+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */