iw: update to 3.17

Patch by Bryan Forbes <bryan@reigndropsfall.net>

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44654
This commit is contained in:
Felix Fietkau 2015-03-11 15:02:32 +00:00
parent ac999f4f33
commit ee1e8c2f2d
4 changed files with 619 additions and 385 deletions

View file

@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
PKG_VERSION:=3.15
PKG_VERSION:=3.17
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw
PKG_MD5SUM:=3b77ad7ec44a865a3bb2ab6c1c463bba
PKG_MD5SUM:=69c4a2f29cf560247febc6cad7161a72
PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
PKG_LICENSE:=GPL-2.0

View file

@ -1,344 +1,672 @@
--- a/nl80211.h
+++ b/nl80211.h
@@ -503,6 +503,9 @@
* TX status event pertaining to the TX request.
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
* management frames at CCK rate or not in 2GHz band.
+ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
+ * counters which will be updated to the current value. This attribute
+ * is used during CSA period.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
* time if it is known that it is no longer necessary.
@@ -719,6 +722,22 @@
* QoS mapping is relevant for IP packets, it is only valid during an
* association. This is cleared on disassociation and AP restart.
@@ -25,10 +25,30 @@
*
+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
+ * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
+ * and %NL80211_ATTR_ADMITTED_TIME parameters.
+ * Note that the action frame handshake with the AP shall be handled by
+ * userspace via the normal management RX/TX framework, this only sets
+ * up the TX TS in the driver/device.
+ * If the admitted time attribute is not added then the request just checks
+ * if a subsequent setup could be successful, the intent is to use this to
+ * avoid setting up a session with the AP when local restrictions would
+ * make that impossible. However, the subsequent "real" setup may still
+ * fail even if the check was successful.
+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
+ * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
+ * before removing a station entry entirely, or before disassociating
+ * or similar, cleanup will happen in the driver/device in this case.
*/
+/*
+ * This header file defines the userspace API to the wireless stack. Please
+ * be careful not to break things - i.e. don't move anything around or so
+ * unless you can demonstrate that it breaks neither API nor ABI.
+ *
+ * Additions to the API should be accompanied by actual implementations in
+ * an upstream driver, so that example implementations exist in case there
+ * are ever concerns about the precise semantics of the API or changes are
+ * needed, and to ensure that code for dead (no longer implemented) API
+ * can actually be identified and removed.
+ * Nonetheless, semantics should also be documented carefully in this file.
+ */
+
#include <linux/types.h>
#define NL80211_GENL_NAME "nl80211"
+#define NL80211_MULTICAST_GROUP_CONFIG "config"
+#define NL80211_MULTICAST_GROUP_SCAN "scan"
+#define NL80211_MULTICAST_GROUP_REG "regulatory"
+#define NL80211_MULTICAST_GROUP_MLME "mlme"
+#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+
/**
* DOC: Station handling
*
@@ -173,8 +193,8 @@
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
*
* @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- * on an %NL80211_ATTR_IFINDEX is supported.
+ * either a dump request for all interfaces or a specific get with a
+ * single %NL80211_ATTR_IFINDEX is supported.
* @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
* @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
@@ -227,7 +247,11 @@
* the interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
* or, if no MAC address given, all stations, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
+ * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
+ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
+ * of disconnection indication should be sent to the station
+ * (Deauthentication or Disassociation frame and reason code for that
+ * frame).
*
* @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
* destination %NL80211_ATTR_MAC on the interface identified by
@@ -248,7 +272,18 @@
* %NL80211_ATTR_IFINDEX.
*
* @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * regulatory domain.
+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
+ * has a private regulatory domain, it will be returned. Otherwise, the
+ * global regdomain will be returned.
+ * A device will have a private regulatory domain if it uses the
+ * regulatory_hint() API. Even when a private regdomain is used the channel
+ * information will still be mended according to further hints from
+ * the regulatory core to help with compliance. A dump version of this API
+ * is now available which will returns the global regdomain as well as
+ * all private regdomains of present wiphys (for those that have it).
+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
+ * its private regdomain is the only valid one for it. The regulatory
+ * core is not used to help with compliance in this case.
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -302,7 +337,9 @@
* if passed, define which channels should be scanned; if not
* passed, all channels allowed for the current regulatory domain
* are used. Extra IEs can also be passed from the userspace by
- * using the %NL80211_ATTR_IE attribute.
+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+ * is supplied.
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
* scheduled scan is not running. The caller may assume that as soon
* as the call returns, it is safe to start a new scheduled scan again.
@@ -639,7 +676,18 @@
* @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
* independently of the userspace SME, send this event indicating
* %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
- * attributes determining channel width.
+ * attributes determining channel width. This indication may also be
+ * sent when a remotely-initiated switch (e.g., when a STA receives a CSA
+ * from the remote AP) is completed;
+ *
+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
+ * has been started on an interface, regardless of the initiator
+ * (ie. whether it was requested from a remote device or
+ * initiated on our own). It indicates that
+ * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
+ * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may
+ * decide to react to this indication by requesting other
+ * interfaces to change channel as well.
*
* @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
* its %NL80211_ATTR_WDEV identifier. It must have been created with
@@ -738,6 +786,31 @@
* before removing a station entry entirely, or before disassociating
* or similar, cleanup will happen in the driver/device in this case.
*
+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ * bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ * network is determined by the network interface.
+ *
+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
+ * identified by the %NL80211_ATTR_MAC parameter. A target channel is
+ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
+ * channel width/type. The target operating class is given via
+ * %NL80211_ATTR_OPER_CLASS.
+ * The driver is responsible for continually initiating channel-switching
+ * operations and returning to the base channel for communication with the
+ * AP.
+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
+ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
+ * when this command completes.
+ *
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
+ * as an event to indicate changes for devices with wiphy-specific regdom
+ * management.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -890,6 +909,9 @@ enum nl80211_commands {
@@ -912,6 +985,18 @@ enum nl80211_commands {
NL80211_CMD_ADD_TX_TS,
NL80211_CMD_DEL_TX_TS,
NL80211_CMD_SET_QOS_MAP,
+ NL80211_CMD_ADD_TX_TS,
+ NL80211_CMD_DEL_TX_TS,
+ NL80211_CMD_GET_MPP,
+
+ NL80211_CMD_JOIN_OCB,
+ NL80211_CMD_LEAVE_OCB,
+
+ NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
+
+ NL80211_CMD_TDLS_CHANNEL_SWITCH,
+ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+
+ NL80211_CMD_WIPHY_REG_CHANGE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1525,10 +1547,10 @@ enum nl80211_commands {
* operation).
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
- * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
- * field in the probe response (%NL80211_ATTR_PROBE_RESP).
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
+ * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
+ * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
*
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
* As specified in the &enum nl80211_rxmgmt_flags.
@@ -1576,9 +1598,49 @@ enum nl80211_commands {
* advertise values that cannot always be met. In such cases, an attempt
* to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
*
+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
+ * should be updated when the frame is transmitted.
+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
+ * supported number of csa counters.
+ *
@@ -1606,9 +1691,16 @@ enum nl80211_commands {
* @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
* As specified in the &enum nl80211_tdls_peer_capability.
*
+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
+ * creation then the new interface will be owned by the netlink socket
+ * that created it and will be destroyed when the socket is closed
- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
* creation then the new interface will be owned by the netlink socket
- * that created it and will be destroyed when the socket is closed
+ * that created it and will be destroyed when the socket is closed.
+ * If set during scheduled scan start then the new scan req will be
+ * owned by the netlink socket that created it and the scheduled scan will
+ * be stopped when the socket is closed.
+ * If set during configuration of regulatory indoor operation then the
+ * regulatory indoor configuration would be owned by the netlink socket
+ * that configured the indoor setting, and the indoor operation would be
+ * cleared when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
@@ -1638,6 +1730,40 @@ enum nl80211_commands {
* @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
* &enum nl80211_smps_mode.
*
+ * @NL80211_ATTR_OPER_CLASS: operating class
+ *
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+ * the TDLS link initiator.
+ * @NL80211_ATTR_MAC_MASK: MAC address mask
+ *
+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
+ * shall support Radio Resource Measurements (11k). This attribute can be
+ * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
+ * User space applications are expected to use this flag only if the
+ * underlying device supports these minimal RRM features:
+ * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
+ * %NL80211_FEATURE_QUIET,
+ * If this flag is used, driver must add the Power Capabilities IE to the
+ * association request. In addition, it must also set the RRM capability
+ * flag in the association request's Capability Info field.
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
+ * is self-managing its regulatory information and any regulatory domain
+ * obtained from it is coming from the device's wiphy and not the global
+ * cfg80211 regdomain.
+ *
+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
+ * estimation algorithm (dynack). In order to activate dynack
+ * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
+ * drivers to indicate dynack capability. Dynack is automatically disabled
+ * setting valid value for coverage class.
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
+ * array. The feature flags are identified by their bit index (see &enum
+ * nl80211_ext_feature_index). The bit index is ordered starting at the
+ * least-significant bit of the first byte in the array, ie. bit index 0
+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
+ * of byte 3 (u8 array).
+ *
+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
+ * (per second) (u16 attribute)
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
+ * may return a survey entry without a channel indicating global radio
+ * statistics (only some values are valid and make sense.)
+ * For devices that don't return such an entry even then, the information
+ * should be contained in the result as the sum of the respective counters
+ * over all channels.
+ *
+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
+ * &enum nl80211_smps_mode.
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
+ * WoWLAN net-detect scan) is started, u32 in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ * is operating in an indoor environment.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1914,6 +1976,25 @@ enum nl80211_attrs {
@@ -1973,7 +2099,7 @@ enum nl80211_attrs {
NL80211_ATTR_TDLS_PEER_CAPABILITY,
+ NL80211_ATTR_IFACE_SOCKET_OWNER,
- NL80211_ATTR_IFACE_SOCKET_OWNER,
+ NL80211_ATTR_SOCKET_OWNER,
NL80211_ATTR_CSA_C_OFFSETS_TX,
NL80211_ATTR_MAX_CSA_COUNTERS,
@@ -1990,15 +2116,35 @@ enum nl80211_attrs {
NL80211_ATTR_SMPS_MODE,
+ NL80211_ATTR_OPER_CLASS,
+
+ NL80211_ATTR_CSA_C_OFFSETS_TX,
+ NL80211_ATTR_MAX_CSA_COUNTERS,
+ NL80211_ATTR_MAC_MASK,
+
+ NL80211_ATTR_TDLS_INITIATOR,
+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
+
+ NL80211_ATTR_USE_RRM,
+ NL80211_ATTR_EXT_FEATURES,
+
+ NL80211_ATTR_WIPHY_DYN_ACK,
+ NL80211_ATTR_SURVEY_RADIO_STATS,
+
+ NL80211_ATTR_TSID,
+ NL80211_ATTR_USER_PRIO,
+ NL80211_ATTR_ADMITTED_TIME,
+ NL80211_ATTR_NETNS_FD,
+
+ NL80211_ATTR_SMPS_MODE,
+ NL80211_ATTR_SCHED_SCAN_DELAY,
+
+ NL80211_ATTR_REG_INDOOR,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2182,6 +2263,8 @@ enum nl80211_sta_bss_param {
* Contains a nested array of signal strength attributes (u8, dBm)
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
};
/* source-level API compatibility */
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
/*
* Allow user space programs to use #ifdef on new attributes by defining them
@@ -2028,7 +2174,7 @@ enum nl80211_attrs {
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 32
+#define NL80211_MAX_SUPP_REG_RULES 64
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
@@ -2064,6 +2210,8 @@ enum nl80211_attrs {
* and therefore can't be created in the normal ways, use the
* %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
* commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ * This mode corresponds to the MIB variable dot11OCBActivated=true
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -2083,6 +2231,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
NL80211_IFTYPE_P2P_DEVICE,
+ NL80211_IFTYPE_OCB,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update {
* @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
* @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
* @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
+ * same as 160 for purposes of the bitrates
* @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
+ * a legacy rate and will be reported as the actual bitrate, i.e.
+ * half the base (20 MHz) rate
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
+ * a legacy rate and will be reported as the actual bitrate, i.e.
+ * a quarter of the base (20 MHz) rate
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
enum nl80211_rate_info {
@@ -2181,6 +2337,8 @@ enum nl80211_rate_info {
NL80211_RATE_INFO_80_MHZ_WIDTH,
NL80211_RATE_INFO_80P80_MHZ_WIDTH,
NL80211_RATE_INFO_160_MHZ_WIDTH,
+ NL80211_RATE_INFO_10_MHZ_WIDTH,
+ NL80211_RATE_INFO_5_MHZ_WIDTH,
/* keep last */
__NL80211_RATE_INFO_AFTER_LAST,
@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param {
*
* @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
+ * (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
+ * (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- * station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
+ * (u32, to this station)
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
* @NL80211_STA_INFO_LLID: the station's mesh LLID
* @NL80211_STA_INFO_PLID: the station's mesh PLID
@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param {
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
+ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
+ * 802.11 header (u32, kbps)
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
* 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ * (u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
+ * for beacons only (u8, dBm)
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
+ * This is a nested attribute where each the inner attribute number is the
+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
+ * each one of those is again nested with &enum nl80211_tid_stats
+ * attributes carrying the actual values.
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2213,6 +2296,7 @@ enum nl80211_sta_info {
NL80211_STA_INFO_TX_BYTES64,
@@ -2292,6 +2466,10 @@ enum nl80211_sta_info {
NL80211_STA_INFO_CHAIN_SIGNAL,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
+ NL80211_STA_INFO_EXPECTED_THROUGHPUT,
NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+ NL80211_STA_INFO_RX_DROP_MISC,
+ NL80211_STA_INFO_BEACON_RX,
+ NL80211_STA_INFO_BEACON_SIGNAL_AVG,
+ NL80211_STA_INFO_TID_STATS,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2336,9 +2420,34 @@ enum nl80211_band_attr {
* using this channel as the primary or any of the secondary channels
* isn't possible
* @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ * channel. A channel that has the INDOOR_ONLY attribute can only be
+ * used when there is a clear assessment that the device is operating in
+ * an indoor surroundings, i.e., it is connected to AC power (and not
+ * through portable DC inverters) or is under the control of a master
+ * that is acting as an AP and is connected to AC power.
+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * channel if it's connected concurrently to a BSS on the same channel on
+ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+ * channel that has the GO_CONCURRENT attribute set can be done when there
+ * is a clear assessment that the device is operating under the guidance of
+ * an authorized master, i.e., setting up a GO while the device is also
+ * connected to an AP with DFS and radar detection on the UNII band (it is
+ * up to user-space, i.e., wpa_supplicant to perform the required
+ * verifications)
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ *
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+ * for more information on the FCC description of the relaxations allowed
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2355,6 +2464,10 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_NO_20MHZ,
+ NL80211_FREQUENCY_ATTR_NO_10MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2573,10 +2686,13 @@ enum nl80211_dfs_regions {
* present has been registered with the wireless core that
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
* supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ * platform is operating in an indoor environment.
*/
enum nl80211_user_reg_hint_type {
NL80211_USER_REG_HINT_USER = 0,
NL80211_USER_REG_HINT_CELL_BASE = 1,
+ NL80211_USER_REG_HINT_INDOOR = 2,
@@ -2299,6 +2477,31 @@ enum nl80211_sta_info {
};
/**
@@ -2998,14 +3114,20 @@ enum nl80211_bss_scan_width {
* @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
* @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
* @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * (if @NL80211_BSS_PRESP_DATA is present then this is known to be
+ * from a probe response, otherwise it may be from the same beacon
+ * that the NL80211_BSS_BEACON_TSF will be from)
* @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
* @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
* @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
* raw information elements from the probe response/beacon (bin);
- * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
- * from a Probe Response frame; otherwise they are from a Beacon frame.
+ * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
+ * different then the IEs here are from a Probe Response frame; otherwise
+ * they are from a Beacon frame.
* However, if the driver does not indicate the source of the IEs, these
* IEs may be from either frame subtype.
+ * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
+ * data here is known to be from a probe response, without any heuristics.
* @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
@@ -3017,6 +3139,10 @@ enum nl80211_bss_scan_width {
* yet been received
* @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
* (u32, enum nl80211_bss_scan_width)
+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
+ * (not present if no beacon frame has been received yet)
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
+ * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3034,6 +3160,8 @@ enum nl80211_bss {
NL80211_BSS_SEEN_MS_AGO,
NL80211_BSS_BEACON_IES,
NL80211_BSS_CHAN_WIDTH,
+ NL80211_BSS_BEACON_TSF,
+ NL80211_BSS_PRESP_DATA,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -3650,6 +3778,8 @@ enum nl80211_iface_limit_attrs {
* different channels may be used within this group.
* @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
* of supported channel widths for radar detection.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
+ * of supported regulatory regions for radar detection.
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
@@ -3683,6 +3813,7 @@ enum nl80211_if_combination_attrs {
NL80211_IFACE_COMB_STA_AP_BI_MATCH,
NL80211_IFACE_COMB_NUM_CHANNELS,
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
+ NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
/* keep last */
NUM_NL80211_IFACE_COMB,
@@ -3893,6 +4024,29 @@ enum nl80211_ap_sme_features {
* interface. An active monitor interface behaves like a normal monitor
* interface, but gets added to the driver. It ensures that incoming
* unicast packets directed at the configured interface address get ACKed.
+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
+ * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
+ * lifetime of a BSS.
+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
+ * Set IE to probe requests.
+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
+ * to probe requests.
+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
+ * requests sent to it by an AP.
+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
+ * current tx power value into the TPC Report IE in the spectrum
+ * management TPC Report action frame, and in the Radio Measurement Link
+ * Measurement Report action frame.
+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
+ * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
+ * to enable dynack.
+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
+ * multiplexing powersave, ie. can turn off all but one chain
+ * even on HT connections that should be using more chains.
+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
+ * multiplexing powersave, ie. can turn off all but one chain
+ * and then wake the rest up as required after, for example,
+ * rts/cts handshake.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
@@ -3913,6 +4067,14 @@ enum nl80211_feature_flags {
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
+ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
+ NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19,
+ NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20,
+ NL80211_FEATURE_QUIET = 1 << 21,
+ NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22,
+ NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,
+ NL80211_FEATURE_STATIC_SMPS = 1 << 24,
+ NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,
};
/**
@@ -3987,6 +4149,25 @@ enum nl80211_acl_policy {
};
/**
+ * enum nl80211_smps_mode - SMPS mode
+ *
+ * Requested SMPS mode (for AP mode)
+ *
+ * @NL80211_SMPS_OFF: SMPS off (use all antennas).
+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
+ * turn on other antennas after CTS/RTS).
+ * enum nl80211_tid_stats - per TID statistics attributes
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
+ * attempted to transmit; u64)
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
+ * transmitted MSDUs (not counting the first attempt; u64)
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ * MSDUs (u64)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_smps_mode {
+ NL80211_SMPS_OFF,
+ NL80211_SMPS_STATIC,
+ NL80211_SMPS_DYNAMIC,
+enum nl80211_tid_stats {
+ __NL80211_TID_STATS_INVALID,
+ NL80211_TID_STATS_RX_MSDU,
+ NL80211_TID_STATS_TX_MSDU,
+ NL80211_TID_STATS_TX_MSDU_RETRIES,
+ NL80211_TID_STATS_TX_MSDU_FAILED,
+
+ __NL80211_SMPS_AFTER_LAST,
+ NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
+ /* keep last */
+ NUM_NL80211_TID_STATS,
+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
+};
+
+/**
* enum nl80211_radar_event - type of radar event for DFS operation
* enum nl80211_mpath_flags - nl80211 mesh path flags
*
* Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
NL80211_RRF_AUTO_BW = 1<<11,
+ NL80211_RRF_GO_CONCURRENT = 1<<12,
+ NL80211_RRF_NO_HT40MINUS = 1<<13,
+ NL80211_RRF_NO_HT40PLUS = 1<<14,
+ NL80211_RRF_NO_80MHZ = 1<<15,
+ NL80211_RRF_NO_160MHZ = 1<<16,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
+ NL80211_RRF_NO_HT40PLUS)
/* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type {
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
* @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- * spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
+ * was turned on (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
* channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
* channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- * receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- * transmitting data
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
+ * receiving data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
+ * transmitting data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ * (on this channel or globally)
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2719,17 +2936,25 @@ enum nl80211_survey_info {
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
NL80211_SURVEY_INFO_IN_USE,
- NL80211_SURVEY_INFO_CHANNEL_TIME,
- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+ NL80211_SURVEY_INFO_TIME,
+ NL80211_SURVEY_INFO_TIME_BUSY,
+ NL80211_SURVEY_INFO_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_TIME_RX,
+ NL80211_SURVEY_INFO_TIME_TX,
+ NL80211_SURVEY_INFO_TIME_SCAN,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
};
+/* keep old names for compatibility */
+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
+
/**
* enum nl80211_mntr_flags - monitor configuration flags
*
@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode {
*
* @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
* established peering with for longer than this time (in seconds), then
- * remove it from the STA's list of peers. Default is 30 minutes.
+ * remove it from the STA's list of peers. You may set this to 0 to disable
+ * the removal of the STA. Default is 30 minutes.
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
@@ -3166,6 +3392,9 @@ enum nl80211_bss {
/**
* enum nl80211_bss_status - BSS "status"
* @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * Note that this is no longer used since cfg80211 no longer
+ * keeps track of whether or not authentication was done with
+ * a given BSS.
* @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
* @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
*
@@ -3379,6 +3608,8 @@ enum nl80211_ps_state {
* interval in which %NL80211_ATTR_CQM_TXE_PKTS and
* %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
* %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
+ * loss event
* @__NL80211_ATTR_CQM_AFTER_LAST: internal
* @NL80211_ATTR_CQM_MAX: highest key attribute
*/
@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm {
NL80211_ATTR_CQM_TXE_RATE,
NL80211_ATTR_CQM_TXE_PKTS,
NL80211_ATTR_CQM_TXE_INTVL,
+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
/* keep last */
__NL80211_ATTR_CQM_AFTER_LAST,
@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm {
* configured threshold
* @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
* configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
- * (Note that deauth/disassoc will still follow if the AP is not
- * available. This event might get used as roaming event, etc.)
+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
*/
enum nl80211_cqm_rssi_threshold_event {
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support {
* @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
* the chip into a special state -- works best with chips that have
* support for low-power operation already (flag)
+ * Note that this mode is incompatible with all of the others, if
+ * any others are even supported by the device.
* @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
* is detected is implementation-specific (flag)
* @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support {
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
* the TCP connection ran out of tokens to use for data to send to the
* service
+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
+ * is detected. This is a nested attribute that contains the
+ * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
+ * specifies how the scan is performed (e.g. the interval, the
+ * channels to scan and the initial delay) as well as the scan
+ * results that will trigger a wake (i.e. the matchsets). This
+ * attribute is also sent in a response to
+ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets
+ * supported by the driver (u32).
+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
+ * containing an array with information about what triggered the
+ * wake up. If no elements are present in the array, it means
+ * that the information is not available. If more than one
+ * element is present, it means that more than one match
+ * occurred.
+ * Each element in the array is a nested attribute that contains
+ * one optional %NL80211_ATTR_SSID attribute and one optional
+ * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
+ * these attributes must be present. If
+ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
+ * frequency, it means that the match occurred in more than one
+ * channel.
* @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
* @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
*
@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers {
NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
+ NL80211_WOWLAN_TRIG_NET_DETECT,
+ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
/* keep last */
NUM_NL80211_WOWLAN_TRIG,
@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features {
* multiplexing powersave, ie. can turn off all but one chain
* and then wake the rest up as required after, for example,
* rts/cts handshake.
+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
+ * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
+ * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
+ * needs to be able to handle Block-Ack agreements and other things.
+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
+ * the vif's MAC address upon creation.
+ * See 'macaddr' field in the vif_params (cfg80211.h).
+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
+ * operating as a TDLS peer.
+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
+ * random MAC address during scan (if the device is unassociated); the
+ * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
+ * address mask/value will be used.
+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
+ * using a random MAC address for every scan iteration during scheduled
+ * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ * be set for scheduled scan and the MAC address mask/value will be used.
+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
+ * random MAC address for every scan iteration during "net detect", i.e.
+ * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ * be set for scheduled scan and the MAC address mask/value will be used.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags {
NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,
NL80211_FEATURE_STATIC_SMPS = 1 << 24,
NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,
+ NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26,
+ NL80211_FEATURE_MAC_ON_CREATE = 1 << 27,
+ NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
+ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
+};
+
+/**
+ * enum nl80211_ext_feature_index - bit index of extended features.
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_VHT_IBSS,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
};
/**
@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason {
* dangerous because will destroy stations performance as a lot of frames
* will be lost while scanning off-channel, therefore it must be used only
* when really needed
+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
+ * for scheduled scan: a different one for every scan iteration). When the
+ * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
+ * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only
+ * the masked bits will be preserved from the MAC address and the remainder
+ * randomised. If the attributes are not given full randomisation (46 bits,
+ * locally administered 1, multicast 0) is assumed.
+ * This flag must not be requested when the feature isn't supported, check
+ * the nl80211 feature flags for the device.
*/
enum nl80211_scan_flags {
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
NL80211_SCAN_FLAG_FLUSH = 1<<1,
NL80211_SCAN_FLAG_AP = 1<<2,
+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
};
/**

View file

@ -1,94 +0,0 @@
Add auto parameter to set distance command in order to enable ACK timeout
estimation algorithm (dynack). Dynack is automatically disabled setting valid
value for coverage class. Currently dynack is supported just by ath9k
This patch is based on "configure dynack through mac80211/cfg80211 stack"
patchset sent on linux-wireless
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
info.c | 2 ++
nl80211.h | 12 ++++++++++++
phy.c | 43 +++++++++++++++++++++++++------------------
3 files changed, 39 insertions(+), 18 deletions(-)
--- a/info.c
+++ b/info.c
@@ -551,6 +551,8 @@ broken_combination:
printf("\tDevice supports scan flush.\n");
if (features & NL80211_FEATURE_AP_SCAN)
printf("\tDevice supports AP scan.\n");
+ if (features & NL80211_FEATURE_ACKTO_ESTIMATION)
+ printf("\tDevice supports ACK timeout estimation.\n");
}
if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
--- a/phy.c
+++ b/phy.c
@@ -362,39 +362,46 @@ static int handle_distance(struct nl8021
int argc, char **argv,
enum id_input id)
{
- char *end;
- unsigned int distance, coverage;
-
if (argc != 1)
return 1;
if (!*argv[0])
return 1;
- distance = strtoul(argv[0], &end, 10);
+ if (strcmp("auto", argv[0]) == 0) {
+ NLA_PUT_FLAG(msg, NL80211_ATTR_WIPHY_DYN_ACK);
+ } else {
+ char *end;
+ unsigned int distance, coverage;
- if (*end)
- return 1;
+ distance = strtoul(argv[0], &end, 10);
- /*
- * Divide double the distance by the speed of light in m/usec (300) to
- * get round-trip time in microseconds and then divide the result by
- * three to get coverage class as specified in IEEE 802.11-2007 table
- * 7-27. Values are rounded upwards.
- */
- coverage = (distance + 449) / 450;
- if (coverage > 255)
- return 1;
+ if (*end)
+ return 1;
+
+ /*
+ * Divide double the distance by the speed of light
+ * in m/usec (300) to get round-trip time in microseconds
+ * and then divide the result by three to get coverage class
+ * as specified in IEEE 802.11-2007 table 7-27.
+ * Values are rounded upwards.
+ */
+ coverage = (distance + 449) / 450;
+ if (coverage > 255)
+ return 1;
- NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
+ NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
+ }
return 0;
nla_put_failure:
return -ENOBUFS;
}
-COMMAND(set, distance, "<distance>",
+COMMAND(set, distance, "<auto|distance>",
NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_distance,
- "Set appropriate coverage class for given link distance in meters.\n"
+ "Enable ACK timeout estimation algorithm (dynack) or set appropriate\n"
+ "coverage class for given link distance in meters.\n"
+ "To disable dynack set valid value for coverage class.\n"
"Valid values: 0 - 114750");
static int handle_txpower(struct nl80211_state *state,

View file

@ -83,15 +83,15 @@
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
@@ -554,6 +563,7 @@ broken_combination:
if (features & NL80211_FEATURE_ACKTO_ESTIMATION)
printf("\tDevice supports ACK timeout estimation.\n");
@@ -584,6 +593,7 @@ broken_combination:
if (features & NL80211_FEATURE_DYNAMIC_SMPS)
printf("\tDevice supports dynamic SMPS\n");
}
+#endif
if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
printf("\tDevice supports T-DLS.\n");
@@ -603,6 +613,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
@ -99,7 +99,7 @@
static int handle_commands(struct nl80211_state *state,
struct nl_cb *cb, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
@@ -615,6 +626,7 @@ static int handle_commands(struct nl8021
@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");