openwrtv3/target/linux/ramips/base-files/etc
INAGAKI Hiroshi ce93445cd6 ramips: add support for ELECOM WRC-2533GST
ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on
MediaTek MT7621A.

Specification:

- MT7621A (2-Core, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 4T4R 2.4/5 GHz wifi
  - MediaTek MT7615
- 5x 10/100/1000 Mbps Ethernet
- 4x LEDs, 6 keys (2x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - baudrate: 57600 bps

Flash instruction using factory image:

1. Connect the computer to the LAN port of WRC-2533GST
2. Connect power cable to WRC-2533GST and turn on it
3. Access to "https://192.168.2.1/" and open firmware update
page ("ファームウェア更新")
4. Select the OpenWrt factory image and click apply ("適用")
button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-07-30 15:55:21 +02:00
..
board.d ramips: add support for ELECOM WRC-2533GST 2018-07-30 15:55:21 +02:00
hotplug.d ramips: add support for DLINK DWR-921-C1 2018-04-04 08:42:35 +02:00
init.d treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
uci-defaults ramips: use generic board detection for D-Link DAP-1522 A1 2018-02-20 19:25:17 +01:00
diag.sh ramips: remove stale get_status_led call 2018-07-25 08:57:17 +02:00
inittab image / basefiles: make console password configurable 2016-04-18 21:53:07 +02:00