ramips: add support for ELECOM WRC-2533GST
ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - MT7621A (2-Core, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 4T4R 2.4/5 GHz wifi - MediaTek MT7615 - 5x 10/100/1000 Mbps Ethernet - 4x LEDs, 6 keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-2533GST 2. Connect power cable to WRC-2533GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
parent
869b0d11db
commit
ce93445cd6
4 changed files with 204 additions and 0 deletions
|
@ -232,6 +232,7 @@ ramips_setup_interfaces()
|
|||
;;
|
||||
dir-860l-b1|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
iodata,wn-ax1167gr|\
|
||||
iodata,wn-gx300gr)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
@ -466,6 +467,7 @@ ramips_setup_macs()
|
|||
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
|
||||
;;
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
sk-wb8)
|
||||
wan_mac=$(mtd_get_mac_binary factory 57350)
|
||||
;;
|
||||
|
|
|
@ -55,6 +55,7 @@ platform_check_image() {
|
|||
duzun-dm06|\
|
||||
e1700|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
esr-9753|\
|
||||
ew1200|\
|
||||
ex2700|\
|
||||
|
|
178
target/linux/ramips/dts/WRC-2533GST.dts
Normal file
178
target/linux/ramips/dts/WRC-2533GST.dts
Normal file
|
@ -0,0 +1,178 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-2533gst", "mediatek,mt7621-soc";
|
||||
model = "ELECOM WRC-2533GST";
|
||||
|
||||
aliases {
|
||||
led-status = &led_power_green;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "wrc-2533gst:green:power";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_blue {
|
||||
label = "wrc-2533gst:blue:power";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wrc-2533gst:red:wps";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_red {
|
||||
label = "wrc-2533gst:red:power";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
client {
|
||||
label = "client";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
extender {
|
||||
label = "extender";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "router";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xb00000>;
|
||||
};
|
||||
|
||||
partition@b50000 {
|
||||
label = "tm_pattern";
|
||||
reg = <0xb50000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ed0000 {
|
||||
label = "tm_key";
|
||||
reg = <0xed0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f50000 {
|
||||
label = "art_block";
|
||||
reg = <0xf50000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "user_data";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart3", "jtag", "wdt", "sdhci";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
// WRC-2533GST has MT7615 for 2.4/5 GHz wifi,
|
||||
// but it's not supported in OpenWrt.
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
|
@ -4,6 +4,19 @@
|
|||
|
||||
DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
|
||||
|
||||
define Build/elecom-gst-factory
|
||||
$(eval product=$(word 1,$(1)))
|
||||
$(eval version=$(word 2,$(1)))
|
||||
( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@
|
||||
( \
|
||||
echo -n "ELECOM $(product) v$(version)" | \
|
||||
dd bs=32 count=1 conv=sync; \
|
||||
dd if=$@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
echo -n "MT7621_ELECOM_$(product)" >> $@
|
||||
endef
|
||||
|
||||
define Build/elecom-wrc-factory
|
||||
$(eval product=$(word 1,$(1)))
|
||||
$(eval version=$(word 2,$(1)))
|
||||
|
@ -104,6 +117,16 @@ define Device/elecom_wrc-1167ghbk2-s
|
|||
endef
|
||||
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
|
||||
|
||||
define Device/elecom_wrc-2533gst
|
||||
DTS := WRC-2533GST
|
||||
IMAGE_SIZE := 11264k
|
||||
DEVICE_TITLE := ELECOM WRC-2533GST
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
|
||||
elecom-gst-factory WRC-2533GST 0.00
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-2533gst
|
||||
|
||||
define Device/ew1200
|
||||
DTS := EW1200
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
|
Loading…
Reference in a new issue