INAGAKI Hiroshi ce93445cd6 ramips: add support for ELECOM WRC-2533GST ... ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - MT7621A (2-Core, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 4T4R 2.4/5 GHz wifi - MediaTek MT7615 - 5x 10/100/1000 Mbps Ethernet - 4x LEDs, 6 keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-2533GST 2. Connect power cable to WRC-2533GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2018-07-30 15:55:21 +02:00
..
imagebuilder	imagebuilder: add function to show manifest	2018-07-30 15:55:21 +02:00
linux	ramips: add support for ELECOM WRC-2533GST	2018-07-30 15:55:21 +02:00
sdk	sdk: change base feed fallback to git.openwrt.org	2018-01-11 18:20:07 +01:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	config: set ARCH if powerpc64 is selected in the configuration	2017-10-24 13:24:04 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00