openwrtv3/target/linux/ath79/dts
INAGAKI Hiroshi 7768f11534 ath79: add support for ELECOM WRC-300GHBK2-I
ELECOM WRC-300GHBK2-I is a 2.4 GHz wireless router, based on Qualcomm
Atheros QCA9563.

Specification:

- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2T2R 2.4 GHz wifi
  - SoC internal
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 4x keys(connected to GPIO: 3x)
- UART header on PCB
  - TX, GND, RX, Vcc from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Boot the WRC-300GHBK2-I normaly and connect the computer to its
LAN port
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新 手動更新(アップデート)")
3. Select the OpenWrt factory image and click apply ("適用") button
to perform firmware update
4. On the (initramfs) factory image, execute "mtd erase firmware" to
erase stock firmware and execute sysupgrade with squashfs-sysupgrade
image for WRC-300GHBK2-I
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-10 09:30:28 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7100.dtsi ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_dlink_dir-825-b1.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar7161_netgear_wndr3700.dts ath79: add WNDR3700 and WNDR3700v2 2018-08-13 08:37:19 +02:00
ar7161_netgear_wndr3700.dtsi ath79: use both WNDR3x00 power leds for boot status indication 2018-08-15 07:42:36 +02:00
ar7161_netgear_wndr3700v2.dts ath79: add WNDR3700 and WNDR3700v2 2018-08-13 08:37:19 +02:00
ar7161_netgear_wndr3800.dts ath79: create WNDR3700 series .dtsi and adjust WNDR3800 2018-08-13 08:37:19 +02:00
ar7161_ubnt_routerstation-pro.dts ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7240.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7240_buffalo_whr-g301n.dts ath79: add support for Buffalo WHR-G301N 2018-08-16 21:20:57 +02:00
ar7240_netgear_wnr612-v2.dts ath79: add Netgear WNR612 v2 2018-06-26 07:05:30 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7240_on_n150r.dts ath79: add support for ON Networks N150R 2018-06-26 07:05:44 +02:00
ar7240_tplink_tl-wr74xn-v1.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7240_tplink_tl-wr740n-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr740n-v3.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr741-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr841-v5.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr941-v4.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7241.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7241_tplink.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7241_tplink_tl-mr3x20.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7241_tplink_tl-mr3220-v1.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_tplink_tl-mr3420-v1.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_ubnt_bullet-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_nano-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_rocket-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_unifi.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7241_ubnt_xm.dtsi ath79: ubnt-xm: hijack LED4 as booting/failsafe 2018-08-23 22:42:15 +02:00
ar7242.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7242_avm_fritz300e.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7242_buffalo_wzr-hp-g450h.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar7242_tplink_tl-wr2543-v1.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9132.dtsi ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x 2018-08-28 11:26:53 +02:00
ar9132_tplink_tl-wr941-v2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9330.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9330_glinet_ar150.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_dptechnics_dpt-module.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_dragino_ms14.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_embeddedwireless_dorin.dts ath79: fix mac address increment for embedded wireless Dorin 2018-08-25 19:18:08 +02:00
ar9331_etactica_eg200.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_onion_omega.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_pisen_wmm003n.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9331_tplink_tl-mr10u.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9331_tplink_tl-mr3040-v2.dts ath79: add support for TP-Link MR-3040 v2 2018-08-16 21:20:57 +02:00
ar9331_tplink_tl-wr703n.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9331_tplink_tl-wr740nd-v4.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9341_pcs_cr3000.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9342_iodata_etg3-r.dts ath79: add support for I-O DATA ETG3-R 2018-08-23 22:42:15 +02:00
ar9344.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9344_ocedo_raccoon.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9344_pcs_cap324.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9344_pcs_cr5000.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9344_tplink_tl-wdr3600.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9344_tplink_tl-wdr4300.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9344_tplink_tl-wdr4300.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: add support for WD My Net Wi-Fi Range Extender 2018-09-10 09:07:41 +02:00
ath79.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
qca956x.dtsi ath79: add QCA956x GMAC config 2018-08-13 08:43:15 +02:00
qca9533.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_glinet_ar300m.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_glinet_ar300m_nand.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_glinet_ar300m_nor.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_tplink_tl-wr841-v9.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9533_tplink_tl-wr841-v11.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9533_tplink_tl-wr841.dtsi ath79: add support for TP-Link WR841N/ND v11 2018-08-14 10:19:37 +02:00
qca9557.dtsi ath79: fix PLL settings for QCA955x 2018-08-09 17:24:39 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
qca9558_buffalo_bhr-4grv2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_ocedo_koala.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: fix PLL settings for QCA955x 2018-08-09 17:24:39 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: add support for TP-Link Archer C7 v1 2018-08-19 18:48:43 +02:00
qca9558_tplink_archer-c7-v2.dts ath79: rename tl-archer-c7 to archer-c7 2018-08-06 07:31:54 +02:00
qca9558_tplink_archer-c7.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9561_avm_fritz4020.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: add support for ELECOM WRC-300GHBK2-I 2018-09-10 09:30:28 +02:00
qca9563_phicomm_k2t.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_re450-v2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_tl-wr1043n.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00