ath79: add support for TP-Link MR-3040 v2
Add support for the ar71xx supported TP-Link MR-3040 v2. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
This commit is contained in:
Dmitry Tunin
Mathias Kresin
parent
9e6f22e309
commit
0c5a532553
4 changed files with 178 additions and 1 deletions
|
|
@ -53,7 +53,8 @@ tplink,re450-v2)
|
|||
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
|
||||
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
|
||||
;;
|
||||
tplink,tl-mr3020-v1)
|
||||
tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||
;;
|
||||
tplink,tl-wr1043nd-v4)
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ ath79_setup_interfaces()
|
|||
tplink,re450-v2|\
|
||||
tplink,tl-mr10u|\
|
||||
tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2|\
|
||||
tplink,tl-wr703n|\
|
||||
ubnt,unifiac-lite|\
|
||||
ubnt,unifiac-mesh|\
|
||||
|
|
|
|||
165
target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
Normal file
165
target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
Normal file
|
|
@ -0,0 +1,165 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar9331.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link TL-MR3040 V2";
|
||||
compatible = "tplink,tl-mr3040-v2", "qca,ar9331";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_lan;
|
||||
led-failsafe = &led_lan;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan {
|
||||
label = "tp-link:green:wlan";
|
||||
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led_lan: lan {
|
||||
label = "tp-link:green:lan";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3g {
|
||||
label = "tp-link:green:3g";
|
||||
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
sw1 {
|
||||
label = "sw1";
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
sw2 {
|
||||
label = "sw2";
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_usb_vbus: reg_usb_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dr_mode = "host";
|
||||
vbus-supply = <®_usb_vbus>;
|
||||
status = "okay";
|
||||
|
||||
hub_port: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
num-chipselects = <1>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <104000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x3d0000>;
|
||||
};
|
||||
|
||||
art: partition@3f0000 {
|
||||
label = "art";
|
||||
reg = <0x3f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
|
||||
switch-phy-addr-swap = <0>;
|
||||
switch-phy-swap = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
compatible = "syscon", "simple-mfd";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
};
|
||||
|
|
@ -21,6 +21,16 @@ define Device/tplink_tl-mr3020-v1
|
|||
endef
|
||||
TARGET_DEVICES += tplink_tl-mr3020-v1
|
||||
|
||||
define Device/tplink_tl-mr3040-v2
|
||||
$(Device/tplink-4mlzma)
|
||||
ATH_SOC := ar9331
|
||||
DEVICE_TITLE := TP-LINK TL-MR3040 v2
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
|
||||
TPLINK_HWID := 0x30400002
|
||||
SUPPORTED_DEVICES += tl-mr3040-v2
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-mr3040-v2
|
||||
|
||||
define Device/tplink_tl-mr3220-v1
|
||||
$(Device/tplink-4m)
|
||||
ATH_SOC := ar7241
|
||||
|
|
|
|||
Loading…
Reference in a new issue