treewide: fix some cosmetic glitches in dts files

- fix single spaces hidden by a tab
- replace indentation with spaces by tabs
- make empty lines empty
- drop trailing whitespace
- drop unnecessary blank lines

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
This commit is contained in:
Paul Wassi 2018-08-23 09:35:04 +02:00 committed by Mathias Kresin
parent 3601c3de23
commit e348ccc4e6
52 changed files with 100 additions and 142 deletions

View file

@ -29,7 +29,6 @@
chosen {
linux,stdout-path = "/plb/opb/serial@ef600400";
};
};

View file

@ -29,7 +29,6 @@
chosen {
linux,stdout-path = "/plb/opb/serial@ef600400";
};
};
&CRYPTO {

View file

@ -106,7 +106,7 @@
watchdog@fffffd40 {
status = "okay";
};
spi0: spi@fffc8000 {
#address-cells = <1>;
#size-cells = <0>;
@ -124,7 +124,7 @@
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
at91boot@0 {
label = "at91boot";
reg = <0x0 0x4000>;
@ -167,7 +167,7 @@
};
};
};
usb0: ohci@500000 {
num-ports = <2>;
status = "okay";

View file

@ -39,7 +39,6 @@
atmel,pins =
<2 1 0x2 0x0>; /* PC1 periph B */
};
};
};

View file

@ -48,11 +48,11 @@
spi1: spi@f8008000 {
status = "okay";
spidev@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <8000000>;
};
spidev@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <8000000>;
};
};
watchdog@fffffe40 {
@ -71,7 +71,6 @@
usb2: ehci@00700000 {
status = "okay";
};
};
gpio_keys {
@ -93,25 +92,25 @@
};
};
leds {
compatible = "gpio-leds";
leds {
compatible = "gpio-leds";
led0 {
label = "wb50n:blue:led0";
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led0 {
label = "wb50n:blue:led0";
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led1 {
label = "wb50n:green:led1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led1 {
label = "wb50n:green:led1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led2 {
label = "wb50n:red:led2";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
led2 {
label = "wb50n:red:led2";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};

View file

@ -85,7 +85,6 @@
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
@ -125,7 +124,6 @@
phy-mode = "rgmii";
};
};
};
};
@ -181,7 +179,7 @@
};
&pll {
clocks = <&extosc>;
clocks = <&extosc>;
};
&spi {
@ -239,7 +237,6 @@
speed = <1000>;
full-duplex;
};
};
&eth1 {
@ -247,5 +244,4 @@
pll-data = <0x11110000 0x00001099 0x00991099>;
phy-handle = <&phy4>;
};

View file

@ -43,7 +43,6 @@
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {

View file

@ -80,7 +80,6 @@
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
rtl8367 {

View file

@ -47,7 +47,6 @@
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&spi {

View file

@ -154,7 +154,6 @@
phy-handle = <&swphy0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};
&eth1 {

View file

@ -74,7 +74,6 @@
default-state = "off";
};
};
};
&ref {

View file

@ -63,7 +63,6 @@
default-state = "off";
};
};
};
&ref {
@ -218,7 +217,6 @@
swconfig,segment = "wan";
swconfig,portmap = <5 5>;
};
};
&wmac {

View file

@ -96,7 +96,6 @@
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
};
};

View file

@ -45,7 +45,6 @@
output-high;
line-name = "gpio-latch-bit";
};
};
};

View file

@ -36,7 +36,6 @@
linux,code = <KEY_RESTART>;
};
};
};
&pinctrl {

View file

@ -31,7 +31,7 @@
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
};
};
gpio-leds {
compatible = "gpio-leds";

View file

@ -31,7 +31,7 @@
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
};
};
gpio-leds {
compatible = "gpio-leds";

View file

@ -31,7 +31,7 @@
gpios = <&pinctrl 33 0>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
};
&hsspi {

View file

@ -25,7 +25,7 @@
gpios = <&pinctrl 32 0>;
linux,code = <KEY_RESTART>;
};
};
};
gpio-leds {
compatible = "gpio-leds";

View file

@ -119,7 +119,7 @@
reg = <0x1fe0000 0x20000>;
};
};
};
};
&pinctrl {
pinctrl-names = "default";

View file

@ -13,7 +13,7 @@
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;

View file

@ -25,7 +25,7 @@
gpios = <&gpio0 13 1>;
linux,code = <KEY_RESTART>;
};
};
};
gpio-leds {
compatible = "gpio-leds";

View file

@ -25,7 +25,7 @@
gpios = <&gpio0 13 1>;
linux,code = <KEY_RESTART>;
};
};
};
gpio-leds {
compatible = "gpio-leds";

View file

@ -31,7 +31,7 @@
gpios = <&pinctrl 34 0>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
};
&hsspi {

View file

@ -183,7 +183,7 @@
output-low;
};
};
led_pins: led_pinmux {
led_pins: led_pinmux {
mux {
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
drive-strength = <0x8>;

View file

@ -410,4 +410,3 @@
/delete-node/ &pcie2_pins;
/delete-node/ &pcie2;

View file

@ -57,7 +57,7 @@
};
soc {
rpm@108000 {
rpm@108000 {
pinctrl-0 = <&rpm_pins>;
pinctrl-names = "default";
};
@ -443,7 +443,7 @@
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22",
pins = "gpio7", "gpio8", "gpio9", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio53";
function = "gpio";
drive-strength = <2>;

View file

@ -18,7 +18,6 @@
led-dsl = &dsl;
led-internet = &online_green;
};
};
memory@0 {

View file

@ -181,7 +181,7 @@
};
};
&pci0 {
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;

View file

@ -93,7 +93,6 @@
phy-mode = "mii";
phy-handle = <&phy14>;
};
};
mdio@0 {
@ -111,7 +110,6 @@
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};

View file

@ -28,7 +28,7 @@
pinctrl {
led_pins: led-pins {
lantiq,pins = "io34", "io35", "io36", "io37", "io38",
lantiq,pins = "io34", "io35", "io36", "io37", "io38",
"io39", "io40", "io41";
lantiq,function = "gpio";
};
@ -100,7 +100,6 @@
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};

View file

@ -14,7 +14,7 @@
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
@ -74,7 +74,6 @@
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};

View file

@ -15,7 +15,7 @@
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
@ -31,12 +31,12 @@
/* Place-holder for SIM-Card connector,
to list the used GPIOs, no official binding */
compatible = "gpio-mmc";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 2 GPIO_ACTIVE_HIGH>,
<0>; /* no CS */
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 2 GPIO_ACTIVE_HIGH>,
<0>; /* no CS */
gpio-names = "di", "do", "clk", "cs";
reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
};
pinctrl {

View file

@ -109,7 +109,7 @@
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;

View file

@ -94,7 +94,7 @@
gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@ -249,5 +249,5 @@
/* No SATA/AHCI on this board */
&sata {
status = "disabled";
status = "disabled";
};

View file

@ -121,51 +121,51 @@
/* Spansion S34ML02G2 256MiB, OEM Layout */
partition@0 {
label = "u-boot";
reg = <0x0000000 0x200000>; /* 2MB */
reg = <0x0000000 0x200000>; /* 2MB */
read-only;
};
partition@200000 {
label = "u_env";
reg = <0x200000 0x20000>; /* 128KB */
reg = <0x200000 0x20000>; /* 128KB */
};
partition@220000 {
label = "s_env";
reg = <0x220000 0x40000>; /* 256KB */
reg = <0x220000 0x40000>; /* 256KB */
};
partition@180000 {
label = "unused_area";
reg = <0x260000 0x5c0000>; /* 5.75MB */
reg = <0x260000 0x5c0000>; /* 5.75MB */
};
partition@7e0000 {
label = "devinfo";
reg = <0x7e0000 0x40000>; /* 256KB */
reg = <0x7e0000 0x40000>; /* 256KB */
read-only;
};
/* kernel1 overlaps with rootfs1 by design */
partition@900000 {
label = "kernel1";
reg = <0x900000 0x7b00000>; /* 123MB */
reg = <0x900000 0x7b00000>; /* 123MB */
};
partition@c00000 {
label = "rootfs1";
reg = <0xc00000 0x7800000>; /* 120MB */
reg = <0xc00000 0x7800000>; /* 120MB */
};
/* kernel2 overlaps with rootfs2 by design */
partition@8400000 {
label = "kernel2";
reg = <0x8400000 0x7b00000>; /* 123MB */
reg = <0x8400000 0x7b00000>; /* 123MB */
};
partition@8700000 {
label = "rootfs2";
reg = <0x8700000 0x7800000>; /* 120MB */
reg = <0x8700000 0x7800000>; /* 120MB */
};
/* last MB is for the BBT, not writable */

View file

@ -64,7 +64,6 @@
gpios = <&gpio1 9 0 &gpio1 10 0>;
i2c-gpio,delay-us = <10>;
};
};
&uart0 {

View file

@ -97,7 +97,6 @@
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio1 {

View file

@ -65,7 +65,6 @@
gpio-export,output = <1>;
gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {

View file

@ -57,8 +57,6 @@
label = "dwr-118-a2:green:usb";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
@ -69,8 +67,8 @@
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
};
&gpio1 {

View file

@ -65,7 +65,6 @@
label = "gb-pc2:green:lan3";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
};
};

View file

@ -35,7 +35,6 @@
label = "gl-mt300a:usb";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
@ -58,7 +57,7 @@
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
};
};
&gpio0 {

View file

@ -75,7 +75,6 @@
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {

View file

@ -30,7 +30,6 @@
label = "gl-mt300n:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {

View file

@ -30,7 +30,6 @@
label = "gl-mt750:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
@ -53,7 +52,7 @@
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
};
};
&gpio0 {

View file

@ -54,7 +54,6 @@
label = "mir3g:amber:lan2";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
@ -76,7 +75,6 @@
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&xhci {

View file

@ -92,7 +92,6 @@
linux,code = <KEY_RFKILL>;
};
};
};
&pinctrl {

View file

@ -29,7 +29,6 @@
label = "rbm33g:green:usr";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {

View file

@ -25,7 +25,6 @@
label = "tiny-ac:orange:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
@ -37,7 +36,6 @@
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {

View file

@ -34,7 +34,6 @@
label = "timecloud:orange:status";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {

View file

@ -162,7 +162,7 @@
mc: mc@1fbf8000 {
compatible = "mtk,mt7621-mc";
reg = <0x1fbf8000 0x8000>;
};
};
uartlite: uartlite@c00 {
compatible = "ns16550a";

View file

@ -15,56 +15,55 @@
#include "s5pv210.dtsi"
/ {
model = "Embedsky TQ210 based on S5PV210";
compatible = "embedsky,tq210", "samsung,s5pv210";
model = "Embedsky TQ210 based on S5PV210";
compatible = "embedsky,tq210", "samsung,s5pv210";
chosen {
bootargs = "console=ttySAC0,115200n8";
};
chosen {
bootargs = "console=ttySAC0,115200n8";
};
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x40000000>;
};
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x40000000>;
};
ethernet@88000000 {
compatible = "davicom,dm9000";
reg = <0x88000000 0x2 0x88000004 0x2>;
interrupt-parent = <&gph1>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
local-mac-address = [00 00 de ad be ef];
davicom,no-eeprom;
clocks = <&clocks CLK_SROMC>;
clock-names = "sromc";
};
ethernet@88000000 {
compatible = "davicom,dm9000";
reg = <0x88000000 0x2 0x88000004 0x2>;
interrupt-parent = <&gph1>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
local-mac-address = [00 00 de ad be ef];
davicom,no-eeprom;
clocks = <&clocks CLK_SROMC>;
clock-names = "sromc";
};
};
&xxti {
clock-frequency = <24000000>;
clock-frequency = <24000000>;
};
&uart0 {
status = "okay";
status = "okay";
};
&nand {
status = "okay";
nand-ecc-mode = "soft";
status = "okay";
nand-ecc-mode = "soft";
partition@0 {
label = "boot";
reg = <0x0 0x40000>; /* 246KB */
read-only;
};
partition@40000 {
label = "kernel";
reg = <0x40000 0x300000>; /* 3MB */
};
partition@0 {
label = "boot";
reg = <0x0 0x40000>; /* 246KB */
read-only;
};
partition@340000 {
label = "rootfs";
reg = <0x340000 0x3fcc0000>; /* 1020MB */
};
partition@40000 {
label = "kernel";
reg = <0x40000 0x300000>; /* 3MB */
};
partition@340000 {
label = "rootfs";
reg = <0x340000 0x3fcc0000>; /* 1020MB */
};
};