Commit graph

36720 commits

Author SHA1 Message Date
Eddi De Pieri
07bc0d6089 lantiq: fix pci issue if mem kernel parameter is used
As specified by e0229a16b0 if the VR9
based router provides FXS ports and they should enabled then the
following must added to the kernel command line:

  mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M

By adding mem= parameter a pci device stop working correctly. The
pci-lantiq.c module use get_num_physpages() to compute dynamically the
memory amount of the board.

The mem= make the module to compute in the wrong way the BAR11MASK, so
in this situation the mask is misaligned with the dma area that the
hardware expects.

This patch is a port of what legacy ifxmips_pci.c does.

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-12 21:04:15 +01:00
Rafał Miłecki
fc93494066 iw: fix build error caused by redeclaration of NL80211_ATTR_PAD
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Fixes: 7aff00ab19 ("iw: update to version 4.9")
2016-11-12 16:30:06 +01:00
Rafał Miłecki
7aff00ab19 iw: update to version 4.9
This adds support for "channels" command which displays more details
about channels. It includes e.g. info about available widths.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-12 16:09:19 +01:00
Rafał Miłecki
7305b55588 iw: update to version 4.7
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-12 16:04:16 +01:00
Matthias Schiffer
9cac5e8be0
ar71xx: generate region-coded factory images for TP-Link TL-WR841ND v11
The latest stock firmwares for US and EU regions have started checking the
region code.

Tested-by: Andreas Ziegler <ml@andreas-ziegler.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-11 03:29:59 +01:00
Jo-Philipp Wich
998632bae2 arm64: boot-wrapper: add mirror checksum
Some builders have troubles cloning the boot-wrapper-aarch64.git repository so
provide a mirror checksum to allow downloading from sources.lede-project.org
instead.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-10 17:24:25 +01:00
Marek Lindner
9978a3e2ca base-files: Prefer busybox arp over /proc/net/arp alias
A firmware compiled with BUSYBOX_CONFIG_ARP should also use by default the
arp binary from busybox. Otherwise the extra functionality the user
requested can only be used when running arp with the path to the binary.

Signed-off-by: Marek Lindner <marek.lindner@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-11-10 16:12:52 +01:00
Mathias Kresin
cc5c8f681e ramips: add TEW-691GR/TEW-692GR 2.4 GHz interface mac addresses
Assign an unused MAC addresses to the 2.4GHz wifi interface as it was
originally planed but not possible.

The MAC address numbering of the TEW-691GR changes to the following
pattern:

  LAN:  AA:BB:CC:DD:EE:0C
  WIFI: AA:BB:CC:DD:EE:0D
  WAN:  AA:BB:CC:DD:EE:0F

The MAC address numbering of the TEW-692GR changes to the following
pattern:

  LAN:    AA:BB:CC:DD:EE:e4
  WAN:    AA:BB:CC:DD:EE:e5
  2.4GHz: AA:BB:CC:DD:EE:e7
  5 GHz:  AA:BB:CC:DD:EE:e8

Set the label and compatible string for the TEW-692GR PCIe wireless
according to the the PCI binding documentation.

Use the wifi@0,0 label and the pci0,0 compatible string since the PCI
vendor and device id is unknown. It should work anyway since the
compatible string isn't evaluated (yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:23:00 +01:00
Mathias Kresin
d8dd207ea6 ramips: use the ralink,mtd-eeprom device tree property
Use the ralink,mtd-eeprom instead of invoking the userspace firmware
loader.

Set the label and compatible string according to the the PCI binding
documentation.

Use the wifi@0,0 label and the pci0,0 compatible string in case the
PCI vendor and device id is unknown. It should work anyway since the
compatible string isn't evaluated (yet).

This commit might fixes the PCIe wireless for the Buffalo WHR-600D.
This board was mentioned in the board 10-rt2x00-eeprom firmware hotplug
script but never had the correct eeprom name set to trigger the
firmware from flash extraction.

Use the usual eeprom for the soc wmac of the Dovado Tiny AC.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:22:59 +01:00
Mathias Kresin
21d8de78dc lantiq: drop ralink eeprom handling function
The eeprom handling function from the rt2x00 driver is used and this
code is obsolete.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
7fd5171a34 lantiq: use the device tree bindings from rt2x00 driver
Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
13208e89d0 lantiq: fix VGV7519 and VGV7510KW22 mac addresses
The VGV7510KW22 stock firmware uses the following mac-addresses:

lan      (ifno 1): AA:BB:CC:DD:EE:60
wlan     (ifno 2): AA:BB:CC:DD:EE:61
atm0     (ifno 3): AA:BB:CC:DD:EE:62
atm1/wan (ifno 4): AA:BB:CC:DD:EE:63

The VGV7519 stock firmware uses the following mac-addresses:

lan:  AA:BB:CC:DD:EE:EF
wlan: AA:BB:CC:DD:EE:EF
wan:  AA:BB:CC:DD:EE:EE

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
b6832817eb mac80211: rt2x00: add support for mac addr from device tree
Backport upstream accepted patch which allows to override the EEPROM
mac address with one from device tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
e7c019c24d mac80211: rt2x00: fold patches
The patch 615-rt2x00-fix_20mhz_clk.patch fixes code introduced by
611-rt2x00-rf_vals-rt3352-xtal20.patch and makes the the platform data
property clk_is_20mhz obsolete.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Felix Fietkau
12a6e3cd05 x86: bump default kernel partition size to 16M
This leaves more room for sysupgrade config data or for having multiple
kernel images to choose from

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-09 12:17:52 +01:00
Jo-Philipp Wich
6649a172f2 Revert "devel/strace: fix build on mpc85xx target"
This reverts commit 519a199cbc.

Multiple users have reported building failures on ARM architectures, e.g.:

    In file included from defs.h:42:0,
                     from process.c:37:
    process.c:51:22: error: 'struct user_regs' has no member named 'ARM_r0'
     #define uoff(member) offsetof(struct user, member)
                          ^
    ./linux/arm/userent.h:1:3: note: in expansion of macro 'uoff'
     { uoff(regs.ARM_r0), "r0" },
       ^

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-08 20:00:42 +01:00
Felix Fietkau
36cccbb283 kernel: select kmod-phy-bcm-ns-usb* from kmod-usb* for bcm53xx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-08 14:25:07 +01:00
Felix Fietkau
462a7c0e96 ar71xx: fix kernel relocate stub parallel build issue
Use per-kernel directory

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-08 11:51:27 +01:00
Rafał Miłecki
28955d9707 kernel: use upstreamed patch for BCM53573 support in bcm47xxsflash
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-08 11:36:39 +01:00
Jo-Philipp Wich
113544dccf firewall: update to fix FS#31, FS#73, FS#154, FS#248
Update to latest Git head in order to import several fixes and enhancements.

- Disable drop invalid by default (FS#73, FS#154)

  Instead of dropping packets with conntrack state INVALID, only allow streams
  with explicit NEW or UNTRACKED conntrack state.

  This change gives user defined rules the chance to accept traffic like ICMPv6
  multicast which would be filtered away by the very early ctstate INVALID drop
  rule otherwise.

  The old behaviour can be restored by explicitely setting "drop_invalid" to 1
  in the global firewall config section.

- Fix re-initialization of loadable iptables extensions on musl (FS#31)

  Since musl does not implement actual dlclose() semantics, it is impossible to
  re-run initializers on subsequent dlopen() calls.

  The firewall3 executable now intercepts the extension registration calls
  instead in order to be able to re-call them when needed.

  This also allowed us to switch to libxtables' builtin extension loader as a
  positive side-effect.

- Fix masquerade rules for multiple negated IP addresses (FS#248)

  When building MASQUERADE rules for zones which specify multiple negated
  addresses in masq_src or masq_dest, emit -j RETURN rules which jump out of
  the masquerading chain instead of creating multiple rules with inverted "-s"
  arguments.

- Tag own rules using comments

  Instead of relying on the nonstandard xt_id match, use the xt_comment match
  to mark own rules. Existing comments are prefixed with "!fw3: " while
  uncommented rules are marked with a sole "!fw3" string.

  This allows removing the xt_id match entirely in a later commit.

- Make missing ubus connection nonfatal

  Technically, firewall3 is able to operate without ubus just fine as long as
  the zones are declared using "option device" or "option subnet" instead of
  "option network" so do not abort execution if ubus could not be connected or
  of no network namespace is exported in ubus.

  This allows running firewall3 on ordinary Linux systems.

- Fix conntrack requirement detection for indirectly connected zones

  The current code fails to apply the conntrack requirement flag recursively to
  zones, leading to stray NOTRACK rules which break conntrack based traffic
  policing.

  Change the implementation to iteratively reapply the conntrack fixup logic
  until no more zones had been changed in order to ensure that all directly and
  indirectly connected zones receive the conntrack requirement flag.

- Add support for iptables 1.6.x

  Adds support for the xtables version 11 api in order to allow building
  against iptables 1.6.x

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-08 11:35:50 +01:00
Christian Lamparter
9c91335dc7 iperf3: update to version 3.1.4
"This release fixes a few minor bugs, including a
(non-security-impacting) buffer overflow fix ported
from upstream cjson."
<http://software.es.net/iperf/news.html#iperf-3-1-4-released>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-08 11:17:11 +01:00
Rafał Miłecki
0a6439154a scripts/feeds: use git rev-parse for getting revision
It provides simpler output so we don't need extra head and cut commands.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-08 11:17:11 +01:00
Rafał Miłecki
4f7947dab8 scripts/feeds: display "X" as revision of uninitialized feeds
So far we were displaying "local" which could be misinterpreted. It
wasn't possible e.g. to say if src-link feed was initialized or not.
Hopefully "X" makes (a bit) more sense.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-08 11:17:11 +01:00
Mathias Kresin
4f7a0601e6 mac80211: rt2x00: add mtd-eeprom swab function
Most of the lantiq devices with ralink wifi have the EEPROM stored
in big endian byte order in flash, but the driver expects the EEPROM to
be in little endian.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:11 +01:00
Mathias Kresin
7f235df571 mac80211: rt2x00: remove eeprom filename dependency from mtd-eeprom
The ralink,mtd-eeprom device tree property doesn't require the
ralink,eeprom property to work.

Rework the error handling and user notification as well. Do not log an
error if the mtd-eeprom parameter isn't used. It could be intentional
and should not scare the user.

Check if the number of bytes read from the mtd devices matches the
requested number of bytes.

In case of an mtd read error, give a hint to the user which partition
was tried to read from.

In case everything is fine, notify the user as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:10 +01:00
Mathias Kresin
2516c0572e mac80211: rt2x00: improve eeprom_file property handling
Call the rt2x00lib_get_eeprom_file_name only once and from the function
where the EEPROM filename is required.

Error only out if an EEPROM file is mandatory. Use the
REQUIRE_EEPROM_FILE bit to determine if it is mandatory.

Do not set the REQUIRE_EEPROM_FILE bit while requesting an EEPROM file.
It should be (and is) set before requesting an EEPROM file.

Do not redirect users to upstream while using a function of a custom
patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:10 +01:00
Christian Lamparter
b5638bb64e apm821xx: redo WAN green and yellow LEDs
Because the WAN port is handled by the internal AR8327N switch, the
device should use swconfig_leds trigger to handle the link activity
of the WAN LED. This has the added bonus that the WAN LED will now
go dark if there's no ethernet cable connected to the WAN port.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-08 11:17:10 +01:00
Pavel Kubelun
524d7a7cde ipq806x: fix pcie reset gpios
Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-08 11:17:10 +01:00
Henryk Heisig
4ad68fa0a2 ar71xx: tl-wpa8630: Fix kernel lenght
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-08 11:17:10 +01:00
Henryk Heisig
1b2b3cb8be ar71xx: wpa8630: change board name to tl-wpa8630
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-08 11:17:10 +01:00
Roger Pueyo Centelles
5f6e948551 ramips: Add support for Wavlink WL-WN575A3
This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug
wireless router with the following specifications:

 - CPU: MediaTek MT7628AN 580MHz
 - Flash: 8MB
 - RAM: 64MB
 - Ethernet: 2x 10/100 Mbps (switched)
 - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm
 - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm
 - Antennas: 4x external (2 per radio), non-detachable
 - LEDs: 4 programmable + LAN, WAN, POWER
 - Buttons: reset, WPS

Flashing instructions:

Factory U-boot launches a TFTP client if WPS button is pressed during power-on.
Rename the sysupgrade file and configure a TFTP as follows:

 - Client (WL-WN575A3) IP: 192.168.10.101
 - Server IP: 192.168.10.100
 - Filename: firmware.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2016-11-08 11:17:10 +01:00
Hans Dedecker
a50243ea1f dnsmasq: Support add-mac option
Adds the mac address of the DNS requestor to DNS queries which
are forwarded upstream and can be used to do filtering by the
upstream servers. This only works if the requestor is on the
same subnet as the dnsmasq server

The addmac parameter can hold the following values:
	0 : mac address is not added
	1 : mac address is added in binary format
	base64 : mac address is added base64 encoded
	text: : mac address is added in human readable format
		as hex and colons

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-11-08 11:17:10 +01:00
BangLang Huang
bc4109845d ramips: fix Newifi D1 profile
the images were generated for the wrong flash size.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-11-08 11:17:10 +01:00
Alberto Bursi
2cb4b267bd mdadm: move to Disc submenu
As in Disc there is also lvm2 and other hard drive tools in the Openwrt package feeds.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Alberto Bursi
decf6b3314 yamonenv: move to Boot Loaders submenu
Boot Loaders submenu is the place where all other boot loaders are.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Alberto Bursi
e4fef72244 comgt: move to WWAN submenu, fixed link
moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems.

I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Alberto Bursi
9abdeee0b7 uqmi: moved to WWAN submenu
Moving uqmi to WWAN submenu

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Felix Fietkau
64c386c566 build: remove stale .ipk files if package dir changes
If a package nonshared status is changed, a stale .ipk file might still
be present in the old package directory. Remove the .ipk file from all
package directories when building a new one (or explicitly running
clean)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-08 10:49:51 +01:00
Christian Schoenebeck
7ee661def6 ca-certificates: update to version 20161102
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2016-11-08 10:49:51 +01:00
Florian Larysch
dfc14bd145 kernel: add kernel module package for the DS1374 RTC
Package the driver for the DS1374 chip present on the T4240RDB.

Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix missing symbol]
2016-11-08 10:49:40 +01:00
Florian Larysch
51b1d76f16 kernel: package module for the W83793 hwmon chips
Package the driver for the W83793 hwmon chip present on the T4240RDB.

Signed-off-by: Florian Larysch <fl@n621.de>
2016-11-08 05:49:58 +01:00
Alexandru Ardelean
519a199cbc devel/strace: fix build on mpc85xx target
builbot faillog:
https://downloads.lede-project.org/snapshots/faillogs/powerpc_8540/base/strace/compile.txt

Seems that for PPC, the <linux/ptrace.h> header [from uapi] collides
with musl's <sys/user.h>, for the pt_regs struct.

Seems I tried to upstream this patch a while back:
https://lists.openwrt.org/pipermail/openwrt-devel/2016-April/041093.html

It seems to work on current LEDE trunk too.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-11-08 05:49:58 +01:00
Cezary Jackiewicz
862e7fb7b3 gcom: Fix 'mode' option for ncm
For Huawei devices like E3372 proper command for set lte mode is:

AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,

Eval is required for proper quotation.

Without this fix:

Fri Nov  4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1
Fri Nov  4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network
...

With this fix:

Fri Nov  4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ
Fri Nov  4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1
Fri Nov  4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0
Fri Nov  4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet"
Fri Nov  4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now
...

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-11-08 05:49:58 +01:00
Rafał Miłecki
e2a65f4aa5 bgmac: backport small DMA fix
It's supposed to significantly improve performance but doesn't seem to
affect Northstar unfortunately. It seems only some other platforms were
limited because of this DMA setup mistake.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-07 14:42:58 +01:00
Rafał Miłecki
4fae9db765 kernel: fix bgmac regression causing BCM47186B0 SoC hangs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-07 14:30:32 +01:00
Mathias Kresin
578f7b9c59 kernel: fix kmod-sound-core build error
Fix build error introduced with 2ab6aac.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-05 22:24:25 +01:00
Dmitry Sutyagin
2ab6aaca4d kernel: add SND_PCM_TIMER to kmod-sound-core
FS#256

Fix audio not working due to unset SND_PCM_TIMER. CONFIG_SND_PCM_TIMER
is required for ALSA to work (at least for some audio devices),
otherwise applications using sound may fail. Can be reproduced by
installing "alsa-utils-tests" and running "speaker-test":

...
ALSA lib pcm_direct.c:1159:(snd1_pcm_direct_initialize_poll_fd) unable to open timer 'hw:CLASS=3,SCLASS=0,CARD=0,DEV=0,SUBDEV=0'
ALSA lib pcm_dmix.c:1106:(snd_pcm_dmix_open) unable to initialize poll_fd
Playback open error: -19,No such device

The kernel size does not increase, only the size of the kernel module
increases.

Signed-off-by: Dmitry Sutyagin <f3flight@gmail.com>
2016-11-05 22:03:42 +01:00
Jo-Philipp Wich
95ac6906aa arm64: switch boot-wrapper to working repository
The original repo in this Makefile disappeared from the internet so use another
copy of this repository on kernel.org. Also switch from git:// to https://
while being at it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-05 16:10:05 +01:00
Koen Vandeputte
347884b345 cns3xxx: fix UART resource overlap
Port 1 registers the same IO resources as port 2 in the kernel resource
tree, which is wrong.
Fix this by using it's own resources as indicated in the overview
(cns3xxx.h).

Compiled & Tested on several GW2388-4 laguna boards which utilizes all 3
ports.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-11-05 10:18:27 +01:00
Felix Fietkau
fb504e8799 Revert "mt76: update to the latest version, adds a tx queue configuration fix"
This reverts commit 32867540ea.
A report indicates that this causes a tx/rx throughput regression

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-05 10:16:53 +01:00