KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ar71xx: wpa8630: change board name to tl-wpa8630

Browse source 
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig 2016-11-07 15:37:25 +01:00 committed by John Crispin
parent 5f6e948551
commit 1b2b3cb8be
13 changed files with 202 additions and 200 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
target/linux/ar71xx/base-files/etc/board.d/01_leds
View file

@ -521,6 +521,11 @@ archer-c7)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt"
;;
tl-wpa8630)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
;;
tl-wr802n-v1)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
;;
@ -638,11 +643,6 @@ wnr612-v2)
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
wpa8630)
ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
;;
wpn824n)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"

8
target/linux/ar71xx/base-files/etc/board.d/02_network
View file

@ -366,6 +366,10 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
tl-wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
tl-wr1043nd)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
@ -398,10 +402,6 @@ ar71xx_setup_interfaces()
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
wpj344)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"

2
target/linux/ar71xx/base-files/etc/diag.sh
View file

@ -44,7 +44,7 @@ get_status_led() {
mr12|\
mr16|\
nbg6616|\
wpa8630)
tl-wpa8630)
status_led="$board:green:power"
;;
ap96)

8
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View file

@ -86,14 +86,14 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
tl-wpa8630)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
unifiac-lite | \
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
wpa8630)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")

6
target/linux/ar71xx/base-files/lib/ar71xx.sh
View file

@ -985,6 +985,9 @@ ar71xx_board_detect() {
*"TL-WDR6500 v2")
name="tl-wdr6500-v2"
;;
*TL-WPA8630)
name="tl-wpa8630"
;;
*TL-WR741ND)
name="tl-wr741nd"
;;
@ -1129,9 +1132,6 @@ ar71xx_board_detect() {
*"WNR1000 V2")
name="wnr1000-v2"
;;
*WPA8630)
name="wpa8630"
;;
*WPN824N)
name="wpn824n"
;;

4
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View file

@ -366,6 +366,7 @@ platform_check_image() {
tl-wdr4300|\
tl-wdr4900-v2|\
tl-wdr6500-v2|\
tl-wpa8630|\
tl-wr1041n-v2|\
tl-wr1043nd-v2|\
tl-wr1043nd|\
@ -386,8 +387,7 @@ platform_check_image() {
tl-wr842n-v3|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
tl-wr941nd|\
wpa8630)
tl-wr941nd)
local magic_ver="0100"
case "$board" in

2
target/linux/ar71xx/config-4.4
View file

@ -163,6 +163,7 @@ CONFIG_ATH79_MACH_TL_WDR3320_V2=y
CONFIG_ATH79_MACH_TL_WDR3500=y
CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
@ -194,7 +195,6 @@ CONFIG_ATH79_MACH_WNR2000_V3=y
CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPA8630=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ342=y
CONFIG_ATH79_MACH_WPJ344=y

4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View file

@ -1708,8 +1708,8 @@ config ATH79_MACH_DAP_2695_A1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_WPA8630
bool "TP-Link WPA8630 support"
config ATH79_MACH_TL_WPA8630
bool "TP-Link TL-WPA8630 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH

2
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View file

@ -169,6 +169,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o
obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
@ -200,7 +201,6 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o

166
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c Normal file
View file

@ -0,0 +1,166 @@
/*
* TP-Link TL-WPA8630 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#define TL_WPA8630_KEYS_POLL_INTERVAL 20
#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * TL_WPA8630_KEYS_POLL_INTERVAL)
#define TL_WPA8630_GPIO_LED_POWER 1
#define TL_WPA8630_GPIO_LED_LAN 5
#define TL_WPA8630_GPIO_LED_WLAN 19
#define TL_WPA8630_GPIO_LED_WLAN5 21
#define TL_WPA8630_GPIO_BTN_RESET 2
#define TL_WPA8630_GPIO_BTN_RFKILL 8
#define TL_WPA8630_GPIO_BTN_LED 6
#define TL_WPA8630_GPIO_BTN_PAIR 7
#define TL_WPA8630_MAC0_OFFSET 0x0000
#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000
#define TL_WPA8630_PCI_CALDATA_OFFSET 0x5000
static struct flash_platform_data tl_wpa8630_flash_data = {
.type = "s25fl064k",
};
static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = {
{
.name = "tl-wpa8630:green:power",
.gpio = TL_WPA8630_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "tl-wpa8630:green:lan",
.gpio = TL_WPA8630_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "tl-wpa8630:green:wlan",
.gpio = TL_WPA8630_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "tl-wpa8630:green:wlan5",
.gpio = TL_WPA8630_GPIO_LED_WLAN5,
.active_low = 1,
},
};
static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WPA8630_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WPA8630_GPIO_BTN_RFKILL,
.active_low = 1,
},
{
.desc = "LED",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WPA8630_GPIO_BTN_LED,
.active_low = 1,
},
{
.desc = "Pair",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WPA8630_GPIO_BTN_PAIR,
.active_low = 1,
},
};
/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data tl_wpa8630_qca8337_data = {
.pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info tl_wpa8630_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &tl_wpa8630_qca8337_data,
},
};
static void __init tl_wpa8630_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&tl_wpa8630_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
art + TL_WPA8630_MAC0_OFFSET, 0);
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(tl_wpa8630_mdio0_info,
ARRAY_SIZE(tl_wpa8630_mdio0_info));
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = ~BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio),
tl_wpa8630_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wpa8630_gpio_keys),
tl_wpa8630_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-Link TL-WPA8630",
tl_wpa8630_setup);

164
target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
View file

@ -1,164 +0,0 @@
/*
* TP-Link WPA8630 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#define WPA8630_KEYS_POLL_INTERVAL 20
#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
#define WPA8630_GPIO_LED_POWER 1
#define WPA8630_GPIO_LED_LAN 5
#define WPA8630_GPIO_LED_WLAN 19
#define WPA8630_GPIO_LED_WLAN5 21
#define WPA8630_GPIO_BTN_RESET 2
#define WPA8630_GPIO_BTN_RFKILL 8
#define WPA8630_GPIO_BTN_0 6
#define WPA8630_GPIO_BTN_1 7
#define WPA8630_MAC0_OFFSET 0x0000
#define WPA8630_WMAC_CALDATA_OFFSET 0x1000
#define WPA8630_PCI_CALDATA_OFFSET 0x5000
static struct flash_platform_data wpa8630_flash_data = {
.type = "s25fl064k",
};
static struct gpio_led wpa8630_leds_gpio[] __initdata = {
{
.name = "wpa8630:green:power",
.gpio = WPA8630_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "wpa8630:green:lan",
.gpio = WPA8630_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "wpa8630:green:wlan",
.gpio = WPA8630_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "wpa8630:green:wlan5",
.gpio = WPA8630_GPIO_LED_WLAN5,
.active_low = 1,
},
};
static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_RFKILL,
.active_low = 1,
},
{
.desc = "LED",
.type = EV_KEY,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_0,
.active_low = 1,
},
{
.desc = "Pair",
.type = EV_KEY,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_1,
.active_low = 1,
},
};
/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data wpa8630_qca8337_data = {
.pad0_cfg = &wpa8630_qca8337_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info wpa8630_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &wpa8630_qca8337_data,
},
};
static void __init wpa8630_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&wpa8630_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
art + WPA8630_MAC0_OFFSET, 0);
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(wpa8630_mdio0_info,
ARRAY_SIZE(wpa8630_mdio0_info));
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = ~BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
wpa8630_leds_gpio);
ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wpa8630_gpio_keys),
wpa8630_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
wpa8630_setup);

2
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View file

@ -198,6 +198,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
@ -258,7 +259,6 @@ enum ath79_mach_type {
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */
ATH79_MACH_WPA8630, /* TP-Link WPA8630 */
ATH79_MACH_WPE72, /* Compex WPE72 */
ATH79_MACH_WPJ342, /* Compex WPJ342 */
ATH79_MACH_WPJ344, /* Compex WPJ344 */

24
target/linux/ar71xx/image/tp-link.mk
View file

@ -371,6 +371,18 @@ define Device/tl-mr3420-v2
endef
TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
define Device/tl-wpa8630
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WPA8630
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := TL-WPA8630
DEVICE_PROFILE := TL-WPA8630
TPLINK_HWID := 0x86300001
MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
endef
TARGET_DEVICES += tl-wpa8630
define Device/tl-wr703n-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR703N
@ -913,15 +925,3 @@ define Device/tl-wa7210n-v2
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
define Device/wpa8630
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK WPA8630
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := WPA8630
DEVICE_PROFILE := WPA8630
TPLINK_HWID := 0x86300001
MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
endef
TARGET_DEVICES += wpa8630