KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lantiq: use the device tree bindings from rt2x00 driver

Browse source 
Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2016-07-14 18:15:48 +02:00
parent 13208e89d0
commit 7fd5171a34
11 changed files with 136 additions and 170 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

60
target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View file

@ -1,60 +0,0 @@
#!/bin/sh
# based on gabors ralink wisoc implementation
rt2x00_eeprom_die() {
echo "rt2x00 eeprom: " "$*"
exit 1
}
rt2x00_eeprom_extract() {
local part=$1
local offset=$2
local count=$3
local swab=$4
local mtd
. /lib/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
rt2x00_eeprom_die "no mtd device found for partition $part"
if [ $swab -gt 0 ]; then
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab || \
rt2x00_eeprom_die "failed to extract from $mtd"
else
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
rt2x00_eeprom_die "failed to extract from $mtd"
fi
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/lantiq.sh
case "$FIRMWARE" in
"RT2860.eeprom" )
board=$(lantiq_board_name)
case $board in
ARV7506PW11|ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
rt2x00_eeprom_extract "board_config" 520 256 1
;;
ARV7525PW)
rt2x00_eeprom_extract "board_config" 1040 512 0
;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
esac
;;
"RT3062.eeprom" )
board=$(lantiq_board_name)
case $board in
VGV7510KW22)
rt2x00_eeprom_extract "board_config" 520 256 1
;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
esac
;;
esac

26
target/linux/lantiq/dts/ARV7506PW11.dts
View file

@ -80,17 +80,6 @@
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
@ -152,3 +141,18 @@
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};

38
target/linux/lantiq/dts/ARV7510PW22.dts
View file

@ -121,24 +121,6 @@
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
@ -189,3 +171,23 @@
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

26
target/linux/lantiq/dts/ARV7519PW.dts
View file

@ -113,18 +113,6 @@
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
@ -222,3 +210,17 @@
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

22
target/linux/lantiq/dts/ARV7525PW.dts
View file

@ -68,12 +68,6 @@
};
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
reg = <0 0x3f0410 0x110>;
};
};
gpio: pinmux@E100B10 {
@ -96,11 +90,6 @@
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
};
};
gpio-keys-polled {
@ -150,3 +139,14 @@
};
};
};
&pci0 {
status = "okay";
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
};
};

28
target/linux/lantiq/dts/ARV752DPW.dts
View file

@ -135,19 +135,6 @@
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
interrupt-map = <0x7000 0 0 1 &icu0 135>;
req-mask = <0x3>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
@ -231,3 +218,18 @@
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
interrupt-map = <0x7000 0 0 1 &icu0 135>;
req-mask = <0x3>;
wifi@1814,0601 {
compatible = "pci1814,0601";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

38
target/linux/lantiq/dts/ARV752DPW22.dts
View file

@ -134,24 +134,6 @@
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
@ -251,3 +233,23 @@
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x7000 0 0 1 &icu0 30
0x7800 0 0 1 &icu0 135
0x7800 0 0 2 &icu0 135
0x7800 0 0 3 &icu0 135
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x3>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
};
};

13
target/linux/lantiq/dts/P2812HNUF1.dts
View file

@ -50,11 +50,6 @@
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT3062.eeprom";
};
gpio-leds {
usb1: usb1 {
label = "p2812hnuf1:green:usb1";
@ -66,3 +61,11 @@
};
};
};
&pci0 {
wifi@1814,3062 {
compatible = "pci1814,3062";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3062.eeprom";
};
};

7
target/linux/lantiq/dts/P2812HNUF3.dts
View file

@ -54,9 +54,12 @@
};
};
};
};
ralink_eep {
compatible = "ralink,eeprom";
&pci0 {
wifi@1814,3092 {
compatible = "pci1814,3092";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3092.eeprom";
};
};

24
target/linux/lantiq/dts/VGV7510KW22.dtsi
View file

@ -75,11 +75,6 @@
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "disabled";
};
@ -92,11 +87,6 @@
phys = [ 00 01 ];
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT3062.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@ -167,6 +157,20 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3592 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";

24
target/linux/lantiq/dts/VGV7519.dtsi
View file

@ -102,11 +102,6 @@
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "disabled";
};
@ -119,11 +114,6 @@
phys = [ 00 01 ];
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@ -214,6 +204,20 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3091 {
compatible = "pci1814,3091";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";