Commit graph

36799 commits

Author SHA1 Message Date
Mathias Kresin
d561b2f5ce gpio-button-hotplug: add more buttons
The keycodes are used by some boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
18c64f41c7 treewide: fix button keys codes used in dts
Use keycodes that matches the intended use case based on the label.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
4780e7e994 ramips: add size checks/append metadata where missing
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
6cc0ae27b9 ramips: fix Airlink AR670W factory image
Move the mkwrgimg build step to the makefile. It will be required by
other boards as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
7cc0d8b3bd mvebu: fix typo in image metadata support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:22 +01:00
Mathias Kresin
3228c2a682 ipq806x: more dts cleanup
Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this
GPIO is mentioned in the GPL tarball, it doesn't do anything. The
2.4/5 GHz LEDs are connected to the wifi chips and not be controlled
from the the userspace.

Use the LEDs names/colours as they are used in the board manuals. Merge
redundant LED configurations. Use the phy[0|1]tpt trigger for the
wireless LEDs. Remove the workarounds for the not controllable wireless
LEDs.

Fix spi compatible strings and remove superfluous spi-max-frequency
parameters.

If there are two power leds, use one for indicating normal operation and
one for failsafe/upgrade. Keep the on/off state of the main power led
during boot.

Use the usb pinmux settings from the nbg6817 gpl sources.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:33:54 +01:00
Henryk Heisig
e3caadc69d ipq806x: clean up dts files
Set the pinmux to the values found in the GPL tarballs of the boards.
Remove pinmux which are is not used (like nand pinmux for spi
flash boards).

This allows to use the wan orange led of the C2600 which had a wrong
pinmux before. Might fix buttons or leds of other boards as well.

Fix the LED color and the ledswitch key code of the C2600. Rename the
ledgnr to ledswitch.

Add support for indication the boot state using LEDs to the D7800,
NBG6817, R7500 and R7500v2.

Change GPIO active to readable values in D7800, EA8500, R7500,
R7500v2 and R7800.

Change gpioexport to gpio pinmux.

Add proper "drive strenght" to i2c4_pins and use it for RPM on
C2600, D7800, EA8500, R7500, R7500v2.

Remove pcie pinmux from D7800.

Move pinctrl to correct place in NBG6817 and R7800.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-27 15:24:59 +01:00
Florian Fainelli
97eff5cba5 firmware-utils: Fix build failure in mkmerakifw.c FS#298
Earlier compilers such as GCC 4 do not like anynomous unions, make it a named
union "u", and update the code where relevant.

Fixes FS#298
Fixes: a72e1692b8 ("firmware-utils: Add support for the Cisco Meraki MX60/MX60W")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-26 22:39:27 +01:00
Julian Kornberger
04a76da1ae ipset: Add InstallDev to provide libipset as library 2016-11-26 22:39:27 +01:00
Martin Blumenstingl
d76ee5bfac lantiq: specify the PCIe controller's interrupt, size and address cells
This allows adding devices to the PCIe controller in the .dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-11-26 22:39:27 +01:00
Martin Blumenstingl
79741dc379 lantiq: Register the device tree node with the PCIe controller
This allows specifying PCI devices as children of the PCIe controller
node to pass configuration data to them.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-11-26 22:39:26 +01:00
Yong-hyu, Ban
c723646f22 ramips: Add missing chunked-io directive to W2914NSV2.dtsi
Fix bug that LEDE failed to boot with this message:

WARNING: CPU: 2 PID: 1 at drivers/spi/spi-mt7621.c:214
mt7621_spi_transfer_one_message+0x28c/0x620()

Signed-off-by: Yong-hyu, Ban <perillamint@gentoo.moe>
2016-11-26 22:39:21 +01:00
Andrew Yong
a7de18718d ramips: SamKnows SK-WB8 DTS cleanup
Use gpio.h definition of GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW. Remove unused backup partition to increase available JFFS space. As long as U-Boot env variable "bootcount" is < 3 (reset to 0 after boot by init script) SamKnow's U-Boot will not attempt to boot from the backup flash address (0xe30000).

Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-11-26 22:35:52 +01:00
Avi H. D
bbdb20f649 kernel: fix typo in input-gpio-encoder package title
Line 115, 'rotary' was misspelled as 'rotay'

Signed off by: Avinash Duduskar <strykar@hotmail.com>
2016-11-26 22:00:30 +01:00
Hannu Nyman
2c05fd7ef4 tools/cmake: update to 3.7.0
Release notes at
https://cmake.org/cmake/help/v3.7/release/3.7.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Hannu Nyman
a22464b92f tools/quilt: update to 0.65
User-visible changes since 0.64 are as follows:

  - Translation fixes
  - Project settings have priority
  - Reject binary files in patches
  - Fix a race condition in diff_file
  - Performance: Optimizations to the setup command
  - Performance: Optimizations to the bash completion script
  - Test suite: Improve the edit test case
  - Test suite: Make the symlink test more robust
  - Test suite: Test backup failure
  - Test suite: Test the header command with hard links
  - diff: Report diff failures
  - edit: Fix a corner case bug
  - mail: Fix the help text
  - push: Fix the synopsis
  - refresh: Do not remove symlinks
  - refresh: Break links to read-only patch files
  - refresh: Always preserve modification time
  - setup: Report failed look-ups in inspect-wrapper
  - quilt.el: Fix quilt-editable when patches are stored in subdirs
  - bash_completion: Handle spaces in file names
  - bash_completion: Update the list of commands
  - bash_completion: Add new command options
  - bash_completion: Fix handling of mail, new, push options
  - guards: Simplify the help text
  - guards: Include the file name also in the "Not found" case
  - guards: Add support for an external filelist in --check mode
  - guards: Report which config file has problem in --check mode
  - guards: Documentation update
  - guards: Clarify a user message

Note to packagers: the Makefile was modified to take configure's
--sysconfdir into account as other projects do. As a result, setting
--prefix=/usr will no longer put the configuration files under /etc.
You now need to explicitly pass --sysconfdir=/etc. If you don't,
configuration files will go under /usr/etc, which is not what you want.
This is somewhat less intuitive, but also more consistent with what
other projects are doing.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Hannu Nyman
a6e790b202 tools/scons: update to 2.5.1
RELEASE 2.5.1 - Mon, 03 Nov 2016 13:37:42 -0400
    - Add scons-configure-cache.py to packaging. It was omitted
    - Use memoization to optimize PATH evaluation across
      all dependencies per node.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Felix Fietkau
95e7868e7e Revert "mvebu: simplify etc/board.d/02_network"
This reverts commit 539ae47103.
According to reports, this introduces a regression on WRT3200ACM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-25 20:03:45 +01:00
Mathias Kresin
ee6beb2e1c ramips: remove kmod-ledtrig-usbdev from recently added devices
None of the devices uses an usb led at all.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-24 22:37:40 +01:00
Piotr Dymacz
6998b8a054 ar71xx: move DomyWifi DW33D to nand subtarget
This device uses NAND FLASH, so it should be kept in nand subtarget.

Also, inlcude in packages kmod-usb-ledtrig-usbport instead of
obsolete kmod-ledtrig-usbdev.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-24 22:37:40 +01:00
Sebastian Quilitz
ae79c41286 ipq806x: add support for TP-Link Archer VR2600v
This router is similar to the C2600. Ethernet on WAN + LAN, switch,
sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem
and the POTS/DECT interface are not supported yet.

It is not possible to flash LEDE via the TP-Link webinterface. The
image need to be signed. The first 0x200 bytes of the image is the
TP-Link header including the signature. The signature is not validated
by the bootloader. The LEDE image is zeroed in this area.

To install LEDE it is necessary to solder a four pin header to JP2.
Connect a serial interface to this header and interrupt the autostart
of kernel. Transfer the sysupgrade image via TFTP and write it to the
serial flash at 0x320000.

Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
2016-11-24 22:37:40 +01:00
Felix Fietkau
0e7869f204 remove bogus dev/null that was accidentally introduced while applying a patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:42:58 +01:00
Felix Fietkau
23a55102df kernel: remove another redundant KCONFIG entry in virt.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:41:10 +01:00
Felix Fietkau
d5c3a7b1ab kernel: fix virtualization kmod dependencies and kconfig symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:29:05 +01:00
Felix Fietkau
e57bed5bc3 kernel: remove kmod-vhost_net, fixes build breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:26:04 +01:00
Felix Fietkau
f3096e6322 sunxi: enable CONFIG_VHOST_NET like on x86
Other virtualization options are already enabled, so this is only a
small addition

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:25:16 +01:00
Felix Fietkau
28cd4880a5 kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:24:11 +01:00
Florian Fainelli
a9dce48b22 libnl-tiny: Remove GENL_ID_GENERATE
This constant was always defined to 0, and recently got removed in
upstream commit a07ea4d9941af5a0c6f0be2a71b51ac9c083c5e5 ("genetlink: no
longer support using static family IDs")

Fixes libnl-tiny builds with latest upstream kernels.

Fixes: d723f2573a ("libnl-tiny: remove include/linux overrides to fix various build issues")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-24 12:53:19 +01:00
Yousong Zhou
715fd8c5bc target: sunxi: enable builtin crypto-hw module sun4i-ss
CONFIG_CRYPTO_DEV_SUN4I_SS was previously set to y but did not take
effect because of the absence of CONFIG_CRYPTO_HW=y

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:19 +01:00
Yousong Zhou
f66cb6f810 build: find_md5: ignore non-existent files or directories
Targets like malta can have no patches/ directory available and this
commit tries quash "no such file or directory" messages from `find`

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:19 +01:00
Christian Lamparter
49856a4bb5 apm821xx: make it possible to update the dtb partition on the WNDR4700
Currently, the device-tree partition is marked as read-only.
Hence, userspace tools like mtd can't write into the partition.
This however will be necessary in case the DTB needs to be
updated.

This patch also adds the kernel.dtb image, so the compiled
DTB is exported as a file and available in the binary
directory along the firmware images.

Note: the u-boot does expects the dtb to be a uimage.

To update the dtb manually:
 1. copy the generated dtb to the router.
 2. mtd erase /dev/mtd2
 3. mtd write wndr4700.dtb /dev/mtd2

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-24 12:53:18 +01:00
Yousong Zhou
468735c3a2 target: sunxi: enable kvm support
Unlike x86, kvm for arm has to be built into the kernel.  The kernel
config was prepared with the following command

    make kernel_menuconfig CONFIG_TARGET=platform

Then enable ARM_LPAE, VIRTUALIZATION, KVM in that order

Other config changes are done by the build system.  The following text
tries to explain some of them, for archive purposes probably...

 - BUILD_BIN2C.  It was dropped probably because the prompt is empty and
   no other config option selects it.  bin2c is a host executable for
   converting binary content to a piece of c code for inclusion
 - CRYPTO_DEV_SUN4I_SS.  It was dropped because the dependency CRYPTO_HW
   was not enabled.  Setting that aside, packaging it as a loadbable
   module in lieu of other sunxi specific modules seems more appropriate
 - PGTABLE_LEVELS.  It was changed from 2 to 3 because 3 is the default
   when ARM_LPAE is enabled
 - HAVE_KERNEL_GZIP, etc..  These are enabled in generic config
 - SCHED_INFO, ZLIB_INFLATE.  These were dropped probably for the same
   reason as for BUILD_BIN2C

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Yousong Zhou
d206dfdf35 package: add kernel packages for kvm virtualization
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Yousong Zhou
49703b589b toolchain: gcc: disable ifunc on *-musl by default
Otherwise the built binaries may fail with

    Error relocating /usr/bin/qemu-system-x86_64: unsupported relocation type 37

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Yousong Zhou
62da60b220 build: scan.mk: remove not used variable SCAN_STAMP
It was left behind since rewrite of metadata scanning done with commit
bdc9419 in July 2007

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Felix Fietkau
426e4d93bb uml: clean up the kernel config and add squashfs+ext4/f2fs support
Replaces plain ext4 images

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 12:53:18 +01:00
Paul Wassi
4081333084 package/utils/fuse: update to 2.9.7
Update fuse+libfuse to upstream 2.9.7. Drop the patch for CVE-2015-3202,
which is already integrated in the newer version. Rework the other patches.
Also switch PKG_SOURCE from @SF to libfuse's github releases.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-24 12:53:17 +01:00
Paul Wassi
539ae47103 mvebu: simplify etc/board.d/02_network
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-24 12:53:17 +01:00
Felix Fietkau
9fc0bcdd18 mvebu: use image metadata for firmware validation
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 12:53:17 +01:00
Eddi De Pieri
d596c21ebd lantiq: write protect vgv7519 u-boot and u-boot-env partitions
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 10:18:19 +01:00
Eddi De Pieri
9720185820 uboot-envtools: make it not shared
uboot-envtools have some stuff related to the cpu.

This should fix following error on lantiq soc:

Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk.
Configuring uboot-envtools.
//usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh'

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 10:17:55 +01:00
Eddi De Pieri
ea12a80276 uboot-lantiq: vgv7519 fix tftp loading of big kernel/image size
On my board:
Bytes transferred = 7084442 (6c199a hex)
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-11-11  17:40:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    7084378 Bytes = 6.8 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error
7 - must RESET b
ROM VER: 1.0.5
CFG 01

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 08:43:49 +01:00
Giuseppe Lippolis
ec1de9b1a6 ramips: Add device DLINK DWR-512-B
The Dlink DWR-512-B modem is a ralink 5350 processor based embedding
a 3G mini-pcie router.

The oem JBOOT bootloader has to be replaced by a RT5350 SDK
U-Boot such as https://github.com/stevenylai/ralink_sdk - U-Boot
configured for the RT5350 256MiB SDR.

Main reason to change the bootloader is the encrypted header used to
store the kernel image. In this way an image can only be generated
using the propietary binboy tool (included in the GPL distribution
from Dlink). The binboy tool doesn't allow to modify the kernel/rootfs
partition scheme. This is considered a big constraint (limited kernel
size and inefficient usage of flash space).

For interested people I pubblished the details of my investigation
about the encrypted firmware header here:
http://lists.infradead.org/pipermail/lede-dev/2016-October/003435.html

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2016-11-23 08:36:11 +01:00
Mathias Kresin
8f561c6516 ramips: do not append metadata to CY-SWR1100 factory image
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-23 08:36:11 +01:00
Mathias Kresin
f1d0eba3ea ramips: cleanup dts files of mt7621 based boards
Fix a typo in mt7621.dtsi compatible string. Disable spi, sdhci and pci
in mt7621.dtsi and enable the nodes in the indiviual board dts files.
The nodes require further device specific configuration anyway.

Remove the m25p80@0 spi child node from mt7621.dtsi and add the
chunked-io parameter to the individual board dts files. Fix the spi
flash compatible string for the WNDR3700V5.

Drop the mt7621-eval-board compatible string for all boards which are
not the eval board.

Drop the linux,modalias parameter from spi flash node.

Remove the xhci node from board files, it is already enabled in dtsi.
Disable xhci for boards not having usb ports populated.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-23 08:36:10 +01:00
Mathias Kresin
18e7f49975 ramips: order mt7621.mk alphabetical
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-23 07:09:03 +01:00
Ben Greear
4592067a24 ath10k-ct-firmware: Update to latest firmwares.
The 10.1 includes a good many stability fixes related to the effort of
backporting upstream 10.2 firmware.  Also enables 802.1q vlan support.
Successfully tested on apu2.

The 10.4 firmwares including new backported code as well as stability
fixes.  10.4 has been tested on Fedora x86-64 platforms, but not on LEDE
specifically since I had issues compiling LEDE for my 9980/9984 AP hardware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-11-22 10:50:59 +01:00
Ben Greear
f94bee8c02 ath10k-ct: Update to latest.
Fixes locking issue, quietens some potential message floods.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-11-22 10:50:51 +01:00
Felix Fietkau
4da8bde638 netifd: update to the latest version
Fixes config reload on bridge MAC address changes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-22 10:48:41 +01:00
Daniel Gonzalez Cabanelas
d2b79e4d80 brcm63xx: Livebox 1: add userspace board support
Fix configuration files for the Livebox 1 routers.
- Add status led
- Set eth0 as the LAN port, for coherence with RedBoot and comfortability.
- Add led triggers

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00