Commit graph

32054 commits

Author SHA1 Message Date
John Crispin
d162dbb664 generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46462
2015-07-24 09:10:19 +00:00
John Crispin
0afb8e8ac2 brcm2708: add kmod-sound-soc-bcm2708-i2s support
This adds support for I2S SoC Audio modules.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46461
2015-07-24 09:10:14 +00:00
John Crispin
2eab9e03cc brcm2708: add kmod-video-bcm2835 support
This adds BCM2835 camera interface driver as a kernel module.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46460
2015-07-24 09:10:05 +00:00
John Crispin
889afbca2e ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46459
2015-07-24 09:10:00 +00:00
John Crispin
5cd49bb067 ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.

https://onion.io/omega

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>

SVN-Revision: 46458
2015-07-24 09:09:49 +00:00
John Crispin
b98205c946 ar71xx: Add support for AP147-010 reference board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46457
2015-07-24 09:09:42 +00:00
John Crispin
42c37d4381 ar71xx: Add support for PCIe on QCA953x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46456
2015-07-24 09:09:31 +00:00
John Crispin
85c7f3fb29 ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.

Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46455
2015-07-24 09:09:27 +00:00
John Crispin
dcae3723fd ramips: add support for STORYLiNK SAP-G3200U3
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.

The following patch adds support for this device.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs

Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)

More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46454
2015-07-24 09:09:22 +00:00
John Crispin
9c0ed4ce5c lantiq: Silence the PCIe error interrupt printk also in 4.1
This ports 9e2a7b779e6f0914395da3657b00f0ac00209bfd to the 4.1 patches.
I forgot this when preparing the initial 4.1 patch.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46453
2015-07-24 09:09:07 +00:00
John Crispin
44c73a2fd2 lantiq: Fix ifxos driver on linux 4.1
request_mem_region returns NULL when requesting the region failed, and
a valid pointer when it was successful. Currently the condition is
inverted.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46452
2015-07-24 09:09:02 +00:00
John Crispin
8c8a558591 kmod-regmap: enable MMIO support
This adds MMIO support for kmod-regmap.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46451
2015-07-24 09:08:57 +00:00
Jonas Gorski
cc42b1049b kernel: refresh patches for 4.1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46441
2015-07-22 12:51:11 +00:00
Jonas Gorski
02198322b9 kernel: update 4.0 to 4.0.9
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.9

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46440
2015-07-22 12:51:04 +00:00
Jonas Gorski
2911b5aa11 kernel: update 3.18 to 3.18.19
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46439
2015-07-22 12:50:59 +00:00
Felix Fietkau
82b1517da2 ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46438
2015-07-22 12:45:12 +00:00
Felix Fietkau
54f5f6fa6c kernel: update to linux 4.1.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46437
2015-07-22 12:45:07 +00:00
Felix Fietkau
9384cc5951 mac80211: update to wireless-testing 2015-07-21
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46436
2015-07-22 12:45:03 +00:00
Felix Fietkau
3b17e2ab68 generic: add more missing linux 4.1 symbols
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46435
2015-07-22 12:44:55 +00:00
Felix Fietkau
9402cb747e tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46434
2015-07-20 10:50:46 +00:00
Felix Fietkau
38dbf49b61 ar71xx: remove the use of the obsolete IRQF_DISABLED flag in the NAND flash driver (fixes #20125)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46433
2015-07-20 06:01:18 +00:00
Felix Fietkau
d6e67327a2 ar71xx: switch to linux 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46432
2015-07-19 17:59:20 +00:00
Felix Fietkau
91791aea2e ar71xx: add missing patch chunk to 4.1 unaligned access hacks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46431
2015-07-19 17:59:15 +00:00
Felix Fietkau
b704d3c96e ar71xx: reorganize 4.1 patch directory layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46430
2015-07-19 17:59:08 +00:00
Felix Fietkau
573d23dda3 ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46429
2015-07-19 17:59:00 +00:00
Felix Fietkau
d3a31435e0 kernel: add missing config symbols for 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46428
2015-07-19 17:58:53 +00:00
Felix Fietkau
2a74944f07 ar71xx: refresh 4.1 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46427
2015-07-19 17:58:46 +00:00
Felix Fietkau
78b1a6b773 ar71xx: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46426
2015-07-19 17:58:40 +00:00
Felix Fietkau
d26e8d9439 Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)
The commit is incomplete, it does not even build the mach-* file

This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574

SVN-Revision: 46425
2015-07-19 17:58:27 +00:00
Felix Fietkau
0fc6755f66 mkimage: cross compile fix: pass HOST_*FLAGS in to uboot's makefile
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build.  Setting these flags is frequently required for unusual
cross-compiles.

Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>

SVN-Revision: 46424
2015-07-19 14:59:26 +00:00
Felix Fietkau
13f50151bc strace: add kernel headers include to host cflags to fix build on non-linux systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46423
2015-07-19 14:59:16 +00:00
Felix Fietkau
51ab7ade4e strace: cross compile fix: pass HOST_*FLAGS in to ./configure
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build.  Setting these flags is frequently required for unusual
cross-compiles.

Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>

SVN-Revision: 46422
2015-07-19 14:59:09 +00:00
Felix Fietkau
26d71e9b25 netifd: update to the latest version, fixes setting RPS/XPS for wlan devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46421
2015-07-18 23:14:19 +00:00
Felix Fietkau
473ddd592c kernel: fix sched_getaffinity on MIPS SMP systems (fixes enabling RPS/XPS in netifd with musl)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46420
2015-07-18 22:49:39 +00:00
John Crispin
c89f360059 ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working
on these devices. This adds them to the calibration data loading introduced in
r46244 and thus makes 5GHz work again for these devices.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46415
2015-07-18 21:15:42 +00:00
John Crispin
2d955b51fe ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46414
2015-07-18 21:15:36 +00:00
Felix Fietkau
621dd13590 cfg80211: fix a locking issue (#20098)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46413
2015-07-18 19:10:38 +00:00
Felix Fietkau
363f32c8ac ramips: enable mt76 by default for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46410
2015-07-18 16:47:05 +00:00
Felix Fietkau
9ed820a4a7 mt76: update to the latest version, fixes rx buffer allocation issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46409
2015-07-18 16:04:58 +00:00
Steven Barth
706adb1601 odhcp6c: add option "sourcefilter" to disable source filter
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46408
2015-07-18 05:44:50 +00:00
Hauke Mehrtens
59671b844a kernel: fix dependecy of kmod-ieee802154_6lowpan
This module also depends on kmod-ieee802154

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46407
2015-07-17 17:55:17 +00:00
John Crispin
d42b6c1afb swconfig: libsw.so should be installed into /usr/lib/
otherwise it's not picked up by toolchain:

staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_musl-1.1.10/lib/gcc/mipsel-openwrt-linux-musl/4.8.3/../../../../mipsel-openwrt-linux-musl/bin/ld: cannot find -lsw

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46406
2015-07-17 12:51:24 +00:00
John Crispin
eff79253f2 ramips: add support for Planex MZK-DP150N
This patch add support for Planex MZK-DP150N.
a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 46405
2015-07-17 12:51:08 +00:00
John Crispin
84b89e4ec4 brcm2708: add gzip image compression
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46404
2015-07-17 12:50:52 +00:00
John Crispin
08a416e3b9 brcm2708: add Raspberry Pi Compute Module support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46403
2015-07-17 12:49:27 +00:00
John Crispin
f7ac790356 brcm2708: switch to linux 4.1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46402
2015-07-17 12:49:09 +00:00
John Crispin
b19a645b40 brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46401
2015-07-17 12:48:59 +00:00
John Crispin
bc5009472d generic: add missing linux 4.1 symbols
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46400
2015-07-17 12:48:51 +00:00
John Crispin
208ab54e3e brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46399
2015-07-17 12:48:39 +00:00
John Crispin
03b56c9350 brcm2708: split target config into subtargets
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46398
2015-07-17 12:48:11 +00:00