ar71xx: Add support for AP147-010 reference board

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46457
This commit is contained in:
John Crispin 2015-07-24 09:09:42 +00:00
parent 42c37d4381
commit b98205c946
15 changed files with 250 additions and 0 deletions

View file

@ -23,6 +23,9 @@ get_status_led() {
ap136-020)
status_led="ap136:green:status"
;;
ap147-010)
status_led="ap147:green:status"
;;
ap135-020)
status_led="ap135:green:status"
;;

View file

@ -46,6 +46,15 @@ ap113)
ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
ap147-010)
ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
bullet-m | \
nanostation-m | \
rocket-m | \

View file

@ -46,6 +46,13 @@ ap136-010)
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
ap147-010)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
ap136-020 |\
ap135-020 |\
tl-wr1043nd-v2 |\

View file

@ -365,6 +365,9 @@ ar71xx_board_detect() {
*"AP143 reference board")
name="ap143"
;;
*"AP147-010 reference board")
name="ap147-010"
;;
*AP81)
name="ap81"
;;

View file

@ -12,6 +12,7 @@ set_preinit_iface() {
alfa-nx |\
ap135-020 |\
ap136-020 |\
ap147-010 |\
ap83 |\
archer-c5 |\
archer-c7 |\

View file

@ -179,6 +179,7 @@ platform_check_image() {
ap136-010 | \
ap136-020 | \
ap135-020 | \
ap147-010 | \
ap96 | \
bxu2000n-2-a1 | \
db120 | \

View file

@ -36,6 +36,7 @@ CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP132=y
CONFIG_ATH79_MACH_AP136=y
CONFIG_ATH79_MACH_AP143=y
CONFIG_ATH79_MACH_AP147=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y

View file

@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP132=y
CONFIG_ATH79_MACH_AP136=y
CONFIG_ATH79_MACH_AP143=y
CONFIG_ATH79_MACH_AP147=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y

View file

@ -0,0 +1,125 @@
/*
* Atheros AP147 reference board support
*
* Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
* Copyright (C) 2015 Sven Eckelmann <sven@open-mesh.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define AP147_GPIO_LED_WAN 4
#define AP147_GPIO_LED_LAN1 16
#define AP147_GPIO_LED_LAN2 15
#define AP147_GPIO_LED_LAN3 14
#define AP147_GPIO_LED_LAN4 11
#define AP147_GPIO_LED_STATUS 13
#define AP147_GPIO_LED_WLAN_2G 12
#define AP147_GPIO_BTN_WPS 17
#define AP147_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP147_KEYS_DEBOUNCE_INTERVAL (3 * AP147_KEYS_POLL_INTERVAL)
#define AP147_MAC0_OFFSET 0x1000
static struct gpio_led ap147_leds_gpio[] __initdata = {
{
.name = "ap147:green:status",
.gpio = AP147_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "ap147:green:wlan-2g",
.gpio = AP147_GPIO_LED_WLAN_2G,
.active_low = 1,
}, {
.name = "ap147:green:lan1",
.gpio = AP147_GPIO_LED_LAN1,
.active_low = 1,
}, {
.name = "ap147:green:lan2",
.gpio = AP147_GPIO_LED_LAN2,
.active_low = 1,
}, {
.name = "ap147:green:lan3",
.gpio = AP147_GPIO_LED_LAN3,
.active_low = 1,
}, {
.name = "ap147:green:lan4",
.gpio = AP147_GPIO_LED_LAN4,
.active_low = 1,
}, {
.name = "ap147:green:wan",
.gpio = AP147_GPIO_LED_WAN,
.active_low = 1,
},
};
static struct gpio_keys_button ap147_gpio_keys[] __initdata = {
{
.desc = "wps button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP147_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP147_GPIO_BTN_WPS,
.active_low = 1,
}
};
static void __init ap147_setup(void)
{
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap147_leds_gpio),
ap147_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP147_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap147_gpio_keys),
ap147_gpio_keys);
ath79_register_usb();
ath79_register_pci();
ath79_register_wmac(art + AP147_MAC0_OFFSET, NULL);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
/* LAN */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_init_mac(ath79_eth1_data.mac_addr, art, 0);
ath79_register_eth(1);
/* WAN */
ath79_switch_data.phy4_mii_en = 1;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, art, 1);
ath79_register_eth(0);
}
MIPS_MACHINE(ATH79_MACH_AP147_010, "AP147-010", "Atheros AP147-010 reference board", ap147_setup);

View file

@ -82,6 +82,16 @@ endef
$(eval $(call Profile,AP143))
define Profile/AP147
NAME:=Qualcomm Atheros AP147 reference board
PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage
endef
define Profile/AP147/Description
Package set optimized for the Atheros AP147 reference board.
endef
$(eval $(call Profile,AP147))
define Profile/AP81
NAME:=Atheros AP81 reference board

View file

@ -1171,6 +1171,7 @@ ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware)
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
@ -2024,6 +2025,7 @@ $(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,1152
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
@ -2178,6 +2180,7 @@ $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
$(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
$(eval $(call MultiProfile,AP143,AP143_8M AP143_16M))
$(eval $(call MultiProfile,AP147,AP147_010))
$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))

View file

@ -8,6 +8,7 @@
# CONFIG_ATH79_MACH_AP121 is not set
# CONFIG_ATH79_MACH_AP132 is not set
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP81 is not set
# CONFIG_ATH79_MACH_AP83 is not set
# CONFIG_ATH79_MACH_AP96 is not set

View file

@ -7,6 +7,7 @@
# CONFIG_ATH79_MACH_AP121 is not set
# CONFIG_ATH79_MACH_AP132 is not set
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP81 is not set
# CONFIG_ATH79_MACH_AP83 is not set
# CONFIG_ATH79_MACH_AP96 is not set

View file

@ -0,0 +1,42 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -118,6 +118,19 @@ config ATH79_MACH_AP143
Say 'Y' here if you want your kernel to support the
Atheros AP143 reference board.
+config ATH79_MACH_AP147
+ bool "Atheros AP147 reference board"
+ select SOC_QCA953X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_AP9X_PCI if PCI
+ help
+ Say 'Y' here if you want your kernel to support the
+ QCA AP147 reference boards.
+
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_ATH79_MACH_AP121) += mach-
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
+obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -29,6 +29,7 @@ enum ath79_mach_type {
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
ATH79_MACH_AP143, /* Atheros AP143 reference board */
+ ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP96, /* Atheros AP96 */

View file

@ -0,0 +1,42 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -118,6 +118,19 @@ config ATH79_MACH_AP143
Say 'Y' here if you want your kernel to support the
Atheros AP143 reference board.
+config ATH79_MACH_AP147
+ bool "Atheros AP147 reference board"
+ select SOC_QCA953X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_AP9X_PCI if PCI
+ help
+ Say 'Y' here if you want your kernel to support the
+ QCA AP147 reference boards.
+
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_ATH79_MACH_AP121) += mach-
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
+obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -29,6 +29,7 @@ enum ath79_mach_type {
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
ATH79_MACH_AP143, /* Atheros AP143 reference board */
+ ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP96, /* Atheros AP96 */