KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
24891 commits 1 branch 0 tags 154 MiB
Commit graph

10487 commits

Author SHA1 Message Date
Hauke Mehrtens
87f994d16d brcm47xx: remove support for kernel 3.6 
SVN-Revision: 36927
 2013-06-12 14:48:45 +00:00
Hauke Mehrtens
990423f3ef brcm47xx: add initial support for kernel 3.9 
SVN-Revision: 36926
 2013-06-12 14:47:53 +00:00
Steven Barth
46d199d1e8 linux: add ipv6 failed-policy routing action (by Jonas Gorski) 
SVN-Revision: 36911
 2013-06-11 09:27:53 +00:00
John Crispin
76c79f50d7 lantiq: Fixes to athxk EEPROM loading 
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
 2013-06-10 08:25:12 +00:00
John Crispin
7638caf35d lantiq: make kernel_oldconfig 
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36900
 2013-06-10 08:25:07 +00:00
John Crispin
f7daed8b9a lantiq: diag.sh with both red and green power LEDs 
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
 2013-06-10 08:25:02 +00:00
John Crispin
fc9532aeaa ramips: add HAME MPR-A2 support 
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

SVN-Revision: 36898
 2013-06-10 08:24:56 +00:00
John Crispin
30786d2dd0 ramips: add support for belkin F7C027 wemo/homeautomatisation plug 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 36897
 2013-06-10 08:24:50 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
 2013-06-08 11:36:07 +00:00
Felix Fietkau
ab529a529b ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36879
 2013-06-07 13:42:50 +00:00
Felix Fietkau
1ace51360f kernel/generic: add a few missing kernel config symbols 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36878
 2013-06-07 13:42:39 +00:00
Florian Fainelli
2b9d084af9 brcm63xx: add user-space support for Netgear CVG834G 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36877
 2013-06-06 22:22:20 +00:00
Florian Fainelli
42e69f45c7 brcm63xx: add kernel space and image support for the Netgear CVG834G 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36876
 2013-06-06 22:22:14 +00:00
Florian Fainelli
966d47989b brcm63xx: add Broadcom cable modem firmware format header 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36875
 2013-06-06 22:22:09 +00:00
Florian Fainelli
600b59642e brcm63xx: add support for BCM3368 
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36874
 2013-06-06 22:21:58 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
 2013-06-05 20:58:59 +00:00
Jonas Gorski
dd9a24663b omap24xx: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36862
 2013-06-05 20:58:55 +00:00
Jonas Gorski
e7b504ce8e kirkwood: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36861
 2013-06-05 20:58:53 +00:00
Imre Kaloz
799bdc990a there's no reason to have these generic files in the bin dir either 
SVN-Revision: 36852
 2013-06-05 06:46:41 +00:00
Imre Kaloz
28e8b8dc05 only copy uImages to the bin dir on ramdisk builds 
SVN-Revision: 36851
 2013-06-05 06:17:12 +00:00
Imre Kaloz
e161581d45 don't copy the zImages to the bin dir, factory u-boots can't use them 
SVN-Revision: 36850
 2013-06-05 06:04:48 +00:00
Gabor Juhos
5bb2e8030d ar71xx: add support for WIFI button on tp-link tl-mr3220v2 
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36848
 2013-06-04 13:25:54 +00:00
Gabor Juhos
d187e3c32e generic: add port mirroring/monitoring capability to rtl8366rb switch 
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the
TL-WR1043ND router that allow to mirror ethernet packets to a monitor port.

Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36847
 2013-06-04 13:25:52 +00:00
Imre Kaloz
a0e412a616 versioned files and dirs still make no sense when you support only a single kernel... 
SVN-Revision: 36836
 2013-06-04 11:29:01 +00:00
Imre Kaloz
3a56df33ad refresh patches 
SVN-Revision: 36835
 2013-06-04 11:24:42 +00:00
Imre Kaloz
8170c9cfb0 add some more symbols 
SVN-Revision: 36834
 2013-06-04 11:23:27 +00:00
Imre Kaloz
812bb43a47 move DT2 related kernel options into the harddist subtarget 
SVN-Revision: 36833
 2013-06-04 11:19:41 +00:00
Imre Kaloz
58fa46c90c drop support for the dns323 
SVN-Revision: 36832
 2013-06-04 11:13:18 +00:00
John Crispin
e9ef65175d lantiq: revert [36779] as it caused a regression 
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
 2013-05-31 13:25:07 +00:00
Gabor Juhos
da66ea52ec ar71xx: register USB port for RB2011U* devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36801
 2013-05-30 17:38:31 +00:00
Gabor Juhos
23bcceb058 ar71xx: create a separated network interface for the RB2011UAS SFP port 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36800
 2013-05-30 17:38:30 +00:00
Gabor Juhos
151dca0935 ar71xx: make the SFP port usable on RB2011*S boards 
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36799
 2013-05-30 17:38:28 +00:00
Gabor Juhos
a1f91282b4 generic: ar8216: allow to specify SGMII config via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36798
 2013-05-30 17:38:26 +00:00
Gabor Juhos
c170d3c3e4 generic: ar8216: add get_port_link callback 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36797
 2013-05-30 17:38:22 +00:00
Gabor Juhos
3467b17e69 ar71xx: rb2011: add switch led control values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36796
 2013-05-30 17:38:21 +00:00
Gabor Juhos
4cf6e53ccc ar71xx: rb2011: update RGMII RX/TX delay values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36795
 2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793 ar71xx: rb2011: move NAND nCE init to rb2011_nand_init 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36794
 2013-05-30 17:38:17 +00:00
Gabor Juhos
50c59c4797 ar71xx: add user-space support for RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36793
 2013-05-30 17:38:15 +00:00
Gabor Juhos
d6554bf66a ar71xx: add kernel support for the RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36792
 2013-05-30 17:38:13 +00:00
Gabor Juhos
8e56b1e742 generic: ar8216: show chip revision in the kernel log 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36791
 2013-05-30 16:25:14 +00:00
Gabor Juhos
d19dae6e2d ar71xx: add profile and build image for the Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36790
 2013-05-30 16:23:10 +00:00
Gabor Juhos
35b5b38316 ar71xx: add user-space support for TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36789
 2013-05-30 16:23:09 +00:00
Gabor Juhos
91d7c3efc1 ar71xx: add kernel support for the TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36788
 2013-05-30 16:23:07 +00:00
Gabor Juhos
f02765086d ar71xx: add USB workarounds for AR934x/QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36787
 2013-05-30 16:23:06 +00:00
Gabor Juhos
6ff976a87a ar71xx: add profile and build image for the DIR-601-B1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36786
 2013-05-30 16:19:30 +00:00
Gabor Juhos
424c4c0b0a ar71xx: allow to build CameoHornet images for multiple regions 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36785
 2013-05-30 16:19:29 +00:00
Gabor Juhos
184dd34b6d ar71xx: allow to override fw version in CameoHornet profile 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36784
 2013-05-30 16:19:28 +00:00
John Crispin
e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting 
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

SVN-Revision: 36783
 2013-05-30 16:01:06 +00:00
John Crispin
c2b1e9eeef lantiq: Fix ar8216 switch configuration 
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
 2013-05-30 16:00:59 +00:00
John Crispin
090a75447b lantiq: DGN3500 support 
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
 2013-05-30 16:00:50 +00:00
John Crispin
a9968d9cb8 lantiq: enable retrieving kernel args from bootloader 
This patch is a device tree enhancement that IMHO is worthy of mainline.
It allows the bootloader's commandline to be preserved even when the
device tree specifies one.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36780
 2013-05-30 16:00:42 +00:00
John Crispin
d1f3751d05 lantiq: wifi calibration from MTD 
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36779
 2013-05-30 16:00:32 +00:00
John Crispin
83c3cd4ed9 lantiq: postpone PCI and wifi init 
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36778
 2013-05-30 16:00:24 +00:00
John Crispin
b585923cc9 lantiq: fix LED-handling oversights 
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
 2013-05-30 16:00:15 +00:00
John Crispin
1756047518 ramips: set correct description for rt305x subtarget 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36775
 2013-05-30 15:59:56 +00:00
Luka Perkov
4b21af4268 imx6: add new target 
SVN-Revision: 36753
 2013-05-29 01:27:29 +00:00
Luka Perkov
846e3d40a0 kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches 
SVN-Revision: 36752
 2013-05-29 01:27:27 +00:00
Gabor Juhos
c4d0a49348 ar71xx: typo in detect TL-MR10U/TL-MR11U 
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36727
 2013-05-26 16:38:00 +00:00
Gabor Juhos
cc7bedf8a3 ar71xx: fix TL-MR10U usb power 
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36726
 2013-05-26 16:37:59 +00:00
Gabor Juhos
7d2182c455 kernel: update linux 3.9 to 3.9.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36725
 2013-05-26 16:02:34 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Gabor Juhos
93ce462b7e ar71xx: set eth0 mac address to match bottom label of the OM2P LC 
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36723
 2013-05-26 16:02:29 +00:00
Gabor Juhos
0842478e44 ar71xx: add TP-LINK TL-MR10U 
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36722
 2013-05-26 16:02:26 +00:00
Luka Perkov
0998065a53 generic: ar8216: add port mirroring 
Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both
RX and TX traffic from LAN port 1 to LAN port 4:

$ swconfig dev switch0 set enable_mirror_rx 1
$ swconfig dev switch0 set enable_mirror_tx 1
$ swconfig dev switch0 set mirror_monitor_port 4
$ swconfig dev switch0 set mirror_source_port 1

Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36713
 2013-05-24 13:10:22 +00:00
Felix Fietkau
fe7e52e4a4 ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36679
 2013-05-21 09:45:46 +00:00
Jonas Gorski
a01be4a217 kernel: update 3.9 to 3.9.3 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36676
 2013-05-20 16:57:00 +00:00
Jonas Gorski
3ac261cd21 ar7: drop obsolete 3.3 support 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36674
 2013-05-20 12:42:44 +00:00
Jonas Gorski
334e6d4e0c ar7: drop obsolete 3.6 support 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36673
 2013-05-20 12:42:41 +00:00
Jonas Gorski
49c81c6e00 ar7: switch to 3.9 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36672
 2013-05-20 12:42:38 +00:00
Jonas Gorski
c4b943c82c ar7: add support for 3.9 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36671
 2013-05-20 12:42:36 +00:00
Jonas Gorski
4d0fcd0c49 kernel: add some missing symbols/move them to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36670
 2013-05-20 12:42:32 +00:00
Jonas Gorski
b751b5893c brcm2708: make it boot on revision 2 raspberry pis 
* update the bootcode.bin to the newest version
    - gpu/cpu mem split is now configured through config.txt, so no need
      to create more than one sd card image (just edit the config.txt)
    - bootcode.bin now supports the never revision 2 raspberry pis

  * add a commented prepopulated config.txt for easier config changes
    Taken from <https://github.com/Evilpaul/RPi-config>

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36668
 2013-05-20 12:07:03 +00:00
Jonas Gorski
c0435a971e kernel: generic: add 3.10-rc1 support 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36663
 2013-05-19 18:36:15 +00:00
Jonas Gorski
0a62b7c148 bcm63xx: add 3.9 support 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36660
 2013-05-19 18:32:13 +00:00
Jonas Gorski
1f4e5f77a0 bcm63xx: Simplify CFE detection. 
Check bootloader argument in mtd.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
                   one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36659
 2013-05-19 18:32:02 +00:00
Jonas Gorski
6e2b85b401 kernel: update 3.9 to 3.9.2 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36658
 2013-05-19 18:31:51 +00:00
Jonas Gorski
668604f91d kernel: don't remove of_tables 
These are needed for OF setup of clocksource, clocks and irqchips.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36657
 2013-05-19 11:27:28 +00:00
Felix Fietkau
56478636aa ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36646
 2013-05-17 07:31:00 +00:00
Felix Fietkau
144cfb65a4 ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36631
 2013-05-13 19:13:33 +00:00
Felix Fietkau
2c5a5d8736 kernel: add missing PHY ID for an AR8327 switch variant 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36630
 2013-05-13 19:13:27 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
 2013-05-12 21:41:55 +00:00
Jonas Gorski
ed06d2ad5c bcm63xx: don't build CRAMFS 
Don't build the CRAMFS file system module in the kernel, and save some bytes.

No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36616
 2013-05-12 21:41:52 +00:00
Jonas Gorski
ccd7fbba87 led and buttons support for board DWV-S0 
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36615
 2013-05-12 21:41:50 +00:00
Jonas Gorski
0a907fdb8a bcm63xx: remove defconfig support 
All boards use uci-defaults, no need to keep defconfig support.

SVN-Revision: 36610
 2013-05-12 11:54:38 +00:00
Jonas Gorski
bbd02c6fb7 kernel: fix CVE-2013-1763 in older kernels 
Newer kernels were already fixed by upstream.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36607
 2013-05-12 10:55:12 +00:00
Felix Fietkau
0be8dd36dc ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36600
 2013-05-09 23:32:46 +00:00
Jonas Gorski
0b03ff2028 kernel: make zlib and lzo modules selectable 
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36592
 2013-05-09 20:50:07 +00:00
Hauke Mehrtens
0b161c6f9e kernel: b53: use correct oops for bcm5365 switch 
SVN-Revision: 36589
 2013-05-09 20:01:58 +00:00
Jonas Gorski
98f6dc1b43 kernel: allow building zsmalloc as a module again 
zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.

Closes #13481.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36587
 2013-05-09 19:19:36 +00:00
Gabor Juhos
cb3d71ca8e ar71xx: use combined kernel image in the CameoHornet template 
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36584
 2013-05-08 17:11:10 +00:00
Gabor Juhos
f938a798f8 ar71xx: add profile and build image for the RNX-N360RT board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36582
 2013-05-08 17:07:19 +00:00
Gabor Juhos
852b8e9490 ar71xx: add user-space model detection for the RNX-N360RT board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36581
 2013-05-08 17:07:18 +00:00
Gabor Juhos
c70694e755 ar71xx: add profile and build image for Netgear WNDAP360 
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36580
 2013-05-08 17:03:43 +00:00
Gabor Juhos
33a2cbfd5c ar71xx: add user-space support for Netgear WNDAP360 
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36579
 2013-05-08 17:03:42 +00:00
Gabor Juhos
10b3ca5ccb ar71xx: add kernel support for Netgear WNDAP360 
Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36578
 2013-05-08 17:03:34 +00:00
Gabor Juhos
39467e78e7 kernel: update linux 3.9 to 3.9.1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36577
 2013-05-08 08:53:55 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
Gabor Juhos
d09ba5ef10 ar71xx: Fix AP135 partition layout 
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36575
 2013-05-08 08:53:49 +00:00
John Crispin
eb10f052ce lantiq: enable portmaps again and set max port to 2 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36573
 2013-05-07 10:58:52 +00:00
John Crispin
036fb79052 ramips: drop 3.7 support 
Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572
 2013-05-07 10:58:44 +00:00
John Crispin
16a17b318a ramips: properly setup the FEATURES variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36571
 2013-05-07 10:58:30 +00:00
John Crispin
bd6e12d904 ramips: fix memory detection rt5350 
Signed-off-by: Felix Kaechele <felix@fetzig.org>

SVN-Revision: 36568
 2013-05-06 18:23:56 +00:00
John Crispin
899120ddef ramips: enable dsp extensions for rt305x and rt3883 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36567
 2013-05-06 16:45:59 +00:00
John Crispin
849ff98669 ramips: fix fypo in ethernet driver rt288x, rt3883 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36565
 2013-05-06 16:45:43 +00:00
John Crispin
eddd7f5773 ramips: Update ARC Freestation profile 
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36564
 2013-05-06 16:45:35 +00:00
John Crispin
4f1ff28f08 ramips: Support setting active_low in devicetree gpio-export 
Support setting active_low in devicetree gpio-export.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36563
 2013-05-06 16:45:27 +00:00
John Crispin
6af3b6721b ralink: unbreak uart pinmux handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36562
 2013-05-06 16:45:20 +00:00
John Crispin
7c04b3bd66 ramips: fix gpio base numbering 
make banks 0 based to unbreak userland ABI

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36561
 2013-05-06 16:45:12 +00:00
John Crispin
338ff04cab ramips: add gpio base properties to dtsi files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36560
 2013-05-06 16:45:04 +00:00
John Crispin
65760ede8b ramips: unbreak rt2880 support 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36559
 2013-05-06 16:44:56 +00:00
John Crispin
28bdb9efe9 ramips: fix DIR-602D1 flash size 
Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36558
 2013-05-06 16:44:47 +00:00
John Crispin
1c89a60431 ramips: unbreak gpio handling for uart mux group 
this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36543
 2013-05-04 11:36:51 +00:00
Gabor Juhos
bb429757c8 at91: build .dtb file for the CalAmp LMU500 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36542
 2013-05-03 19:01:00 +00:00
Gabor Juhos
ccf95fe938 ar71xx: Fix AP135 PCI 
AP135 has a pluggable PCIE slot unlike AP136.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36541
 2013-05-03 19:00:58 +00:00
Felix Fietkau
18c588a570 ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36530
 2013-05-03 09:12:19 +00:00
Felix Fietkau
30c4360345 kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36529
 2013-05-02 15:59:57 +00:00
Jonas Gorski
24636fcabf bcm63xx: split into two subtargets, generic and SMP 
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36527
 2013-05-02 15:28:31 +00:00
Jonas Gorski
d11efa1428 bcm63xx: add SMP support for BCM6362 and BCM6368 
BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36526
 2013-05-02 15:28:26 +00:00
Jonas Gorski
8f15326acc kernel: generic: don't strip /proc/irq on SMP 
/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36525
 2013-05-02 15:28:12 +00:00
Jonas Gorski
a80a4f3ec2 bcm63xx: fix hsspi flash registration for BCM6362 
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36524
 2013-05-02 15:28:10 +00:00
Jonas Gorski
999a956f4c bcm63xx: fix/enable livebox minipci 
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36523
 2013-05-02 15:28:07 +00:00
Jo-Philipp Wich
6ac2b3b76a atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. 
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513
 2013-05-02 11:46:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Florian Fainelli
db02b0e4ee brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch 
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36506
 2013-05-01 21:52:25 +00:00
Florian Fainelli
292368409e brcm63xx: add missing binary operands to BCM6345 ethernet patch 
Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36505
 2013-05-01 21:12:40 +00:00
Florian Fainelli
6f48ccea02 brcm63xx: remove 3.7 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504
 2013-05-01 21:12:26 +00:00
Gabor Juhos
0ae43dbe9d ar71xx: rename WNR2000v3 support patch 
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36498
 2013-04-30 10:44:11 +00:00
Gabor Juhos
d557a51a40 x86/geos: switch to 3.8.10 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36496
 2013-04-30 10:44:09 +00:00
Gabor Juhos
0fa71ca3e5 linux/3.9: implement pcibios_get_phb_of_node for MIPS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36495
 2013-04-30 10:44:08 +00:00
Gabor Juhos
41445b41cc linux/3.8: use backported pcibios_get_phb_of_node patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36494
 2013-04-30 10:44:07 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos
8e466dcdf4 at91: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36492
 2013-04-30 10:43:58 +00:00
Gabor Juhos
d35545f3d7 linux/3.{8,9}: add missing symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36491
 2013-04-30 10:43:57 +00:00
Gabor Juhos
25c45c0d53 linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL 
It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36490
 2013-04-30 10:43:56 +00:00
John Crispin
eff12a630d ramips: move dlink profile to correct sub folder - 2nd try 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36489
 2013-04-30 10:34:20 +00:00
John Crispin
1db4587bc7 ramips: move dlink profile to correct sub folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36487
 2013-04-30 08:24:26 +00:00
Hauke Mehrtens
ca7f9638d5 broadcom-diag: support for the WNDR3700v3 
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
 2013-04-28 21:11:17 +00:00
Hauke Mehrtens
7dee0dae35 brcm47xx: use kernel 3.8.10 as default kernel 
The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480
 2013-04-28 18:25:16 +00:00
Hauke Mehrtens
00a7ace7cf brcm47xx: add board detection for NETGEAR WNDR4500 V2 
SVN-Revision: 36478
 2013-04-28 18:19:31 +00:00
Hauke Mehrtens
e7e4afbb64 kernel: fix a memory leak in split_rootfs_data() 
allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475
 2013-04-28 17:01:56 +00:00
Hauke Mehrtens
1bac172c44 kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. 
SVN-Revision: 36473
 2013-04-28 16:52:11 +00:00
Jonas Gorski
ad1d3f00cb kernel: update linux 3.9 patches to rc8 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36469
 2013-04-28 11:55:23 +00:00
Jonas Gorski
a33dd13c98 kernel: add missing bcma defines and header file for bcrmfmac 
Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36468
 2013-04-28 11:10:42 +00:00
Gabor Juhos
7c2632fbc5 ar71xx: add user-space support for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36461
 2013-04-26 17:00:54 +00:00
Gabor Juhos
b29b7b65ea ar71xx: add profile and build image for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36460
 2013-04-26 17:00:53 +00:00
Gabor Juhos
9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support 
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
 2013-04-26 17:00:52 +00:00
Gabor Juhos
183e2af1c7 ar71xx: add profile and build image for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36458
 2013-04-26 17:00:50 +00:00
Gabor Juhos
7c4e2c1f72 ar71xx: add user-space support for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36457
 2013-04-26 17:00:49 +00:00
Gabor Juhos
5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3 
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
 2013-04-26 17:00:48 +00:00
Gabor Juhos
c0691e29f1 mpc85xx: Add subtargets Generic and P1020 
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36454
 2013-04-26 16:57:43 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Gabor Juhos
988ae9cbf8 at91: upgrade to kernel 3.8.7 and use devicetree 
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36452
 2013-04-26 16:55:40 +00:00
Gabor Juhos
c63bb1a18e ramips: rt3883: fix build error 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36451
 2013-04-26 16:55:28 +00:00
John Crispin
b42a173664 lantiq: make leds and network work on VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
 2013-04-25 19:03:41 +00:00
John Crispin
520bf46375 lantiq: fix board detection helpers 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
 2013-04-25 19:03:37 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
 2013-04-25 19:03:32 +00:00
John Crispin
4664e21293 generic: fix rtl8366_smi compile warning 
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36442
 2013-04-25 19:03:29 +00:00
John Crispin
9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
 2013-04-25 19:03:25 +00:00
John Crispin
d3d18ae812 lantiq: make lzma-loader based images for VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
 2013-04-25 19:03:21 +00:00
John Crispin
a46acc80e4 lantiq: update VG3503J.dts to match new partition layout 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
 2013-04-25 19:03:17 +00:00
John Crispin
46306c2e47 lantiq: add lzma-loader source 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
 2013-04-25 19:03:13 +00:00
John Crispin
e141b73f9d ramips: remove now unneeded user-space board detection 
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36436
 2013-04-25 19:03:05 +00:00
John Crispin
cf3885eb0f ramips: introduce DTS for ALL5003 
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435
 2013-04-25 19:03:01 +00:00
John Crispin
978567a89e ramips: set preinit interface to eth0 by default. 
This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36434
 2013-04-25 19:02:57 +00:00
John Crispin
7bfab6e308 ramips: Add Alpha ASL-26555 support. 
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
 2013-04-25 19:02:53 +00:00
John Crispin
c7216d0cab ramips: Add support of D-link DIR-620D1 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
 2013-04-25 19:02:48 +00:00
John Crispin
deb3635923 ramips: sync kernel patches with the mips-next tree 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36431
 2013-04-25 19:02:42 +00:00
John Crispin
831c7ea04f preinit: move cmdline failsafe= handling ot the generic code 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
 2013-04-25 19:02:37 +00:00
Jonas Gorski
90986b5581 bcm63xx: update patches with upstream submissions 
SVN-Revision: 36407
 2013-04-23 13:55:36 +00:00
Jonas Gorski
2a1a16d2d5 bcm63xx: switch to linux 3.8 
SVN-Revision: 36406
 2013-04-23 13:55:17 +00:00
Steven Barth
4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD 
SVN-Revision: 36384
 2013-04-22 19:40:16 +00:00
Felix Fietkau
a8a01b42ae kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL 
SVN-Revision: 36378
 2013-04-22 15:01:36 +00:00
Felix Fietkau
cd35ea2174 ar71xx: merge more unaligned access hacks from cerowrt-next 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36374
 2013-04-22 12:53:21 +00:00
Felix Fietkau
f58dcb59c6 kernel: backport SSB/BCMA changes in preparation for a compat-wireless update 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36367
 2013-04-19 12:39:40 +00:00
Gabor Juhos
f03960723a linux/3.9: add missing config symbol 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36365
 2013-04-19 08:07:38 +00:00
Gabor Juhos
e07848664c linux/3.[89]: update bridge_remove_ipv6_dependency patch 
Fixes the following warning:

    CC [M]  net/ipv6/addrconf.o
  net/ipv6/addrconf.c: In function 'addrconf_init':
  net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36364
 2013-04-19 08:07:37 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
Felix Fietkau
96bb7c123b build: consistently use 'depends on' instead of 'depends' 
make the syntax more compatible with kernel menuconfig

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36351
 2013-04-17 15:36:41 +00:00
John Crispin
e3003ea2a9 fix prepare_generic_squashfs 
prepare_generic_squashfs was called twice on the generated images breaking mount_root

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36349
 2013-04-17 11:54:09 +00:00
John Crispin
8001e6a689 fix rt305x gpio 
https://dev.openwrt.org/ticket/13359

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36343
 2013-04-16 06:58:18 +00:00
Felix Fietkau
a662200205 kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360) 
SVN-Revision: 36342
 2013-04-15 20:40:29 +00:00
Imre Kaloz
57b68daee9 refresh against -rc7 
SVN-Revision: 36340
 2013-04-15 16:10:01 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
Gabor Juhos
68c54dc34f mpc85xx: use static SPI bus number for TL-WDR4900 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36329
 2013-04-12 19:44:41 +00:00
Gabor Juhos
54635e7f78 linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36328
 2013-04-12 19:44:38 +00:00
John Crispin
d3a46c4b7f update rt2880 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36327
 2013-04-12 18:57:01 +00:00
John Crispin
92259c4803 fix up the rt2880 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36326
 2013-04-12 18:56:53 +00:00
John Crispin
a6424245e6 fix RT-N15 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36325
 2013-04-12 18:56:44 +00:00
John Crispin
7af1fa46ad update rt2880.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36324
 2013-04-12 18:56:36 +00:00
John Crispin
10f432ba9d fix rtl8366s OF binding 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36323
 2013-04-12 18:56:05 +00:00
Gabor Juhos
687b3f04ce mpc85xx: set preinit interface to eth0 by default 
This makes the WDR4900 accessible via ethernet in
failsafe mode.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36322
 2013-04-12 18:30:25 +00:00
Gabor Juhos
40e15b1fbf mpc85xx: Generate fdt for P1020RDB 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36321
 2013-04-12 18:30:24 +00:00
Gabor Juhos
f43bdf34cd mpc85xx: Add P1020RDB board support 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36320
 2013-04-12 18:30:22 +00:00
John Crispin
d5f87e193c add VG3503J support 
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
 2013-04-11 19:18:07 +00:00
John Crispin
fbc1e3732b add FE phy firmware 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
 2013-04-11 19:17:48 +00:00
John Crispin
0d32469457 add missing pinmux patch 
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
 2013-04-11 07:12:37 +00:00
Felix Fietkau
6436b3f736 cns3xxx: fix USB ehci/ohci platform driver 
Update ehci/ohci driver registration to conform to the new platform
drivers.

This fixes missing USB host support in 3.8.x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36309
 2013-04-10 16:20:50 +00:00
Felix Fietkau
edd8048107 kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base 
Fixes booting on single-core CNS3xxx devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36308
 2013-04-10 16:07:50 +00:00
Felix Fietkau
06733c2650 kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36307
 2013-04-10 13:45:12 +00:00
Felix Fietkau
7fa2957103 kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36304
 2013-04-10 13:11:29 +00:00
Felix Fietkau
df3d4690bd kernel: keep dropped stats in fq_codel 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36303
 2013-04-10 13:11:25 +00:00
Felix Fietkau
ec3a8846fc kernel: tune fq_codel defaults for common netdevice speeds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36302
 2013-04-10 13:11:21 +00:00
Felix Fietkau
307965026a kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36301
 2013-04-10 13:11:16 +00:00
Florian Fainelli
915969ff2c kernel: refresh patches against 3.9-rc6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36297
 2013-04-09 16:16:20 +00:00
Florian Fainelli
c3366cd164 kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c 
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.

Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36296
 2013-04-09 16:16:16 +00:00
Florian Fainelli
518d6a9273 kernel: backport switch user API changes after r36283 
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36295
 2013-04-09 15:47:01 +00:00
John Crispin
fb47fd0d6b unbreak portmapping - typo fix 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36293
 2013-04-09 14:39:01 +00:00
John Crispin
bc7b310959 move memory detect node to dtsi files 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
 2013-04-09 14:19:36 +00:00
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version) 
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
 2013-04-09 14:19:33 +00:00
John Crispin
e468abcae0 remove bootargs from dts 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
 2013-04-09 14:19:28 +00:00
John Crispin
82c3b7ce26 add ofpart info to the devicetrees 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
 2013-04-09 14:19:24 +00:00
John Crispin
f1e9d30ffc add sample swconfig portmap 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
 2013-04-09 14:19:20 +00:00
John Crispin
fcd962cc71 set of_node before registring the switch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36285
 2013-04-09 14:19:17 +00:00
John Crispin
fff58a5801 allow loading port maps from OF 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36283
 2013-04-09 14:19:09 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Gabor Juhos
130f67210a ramips: TEW-691GR.dts fixes 
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
 2013-04-08 12:34:17 +00:00
Gabor Juhos
a4a148f222 ramips: rt3883: enable the AR8216 driver 
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36275
 2013-04-08 12:34:15 +00:00
Gabor Juhos
a9d977b2af ramips: add profile for the Omnima EMB-HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36274
 2013-04-08 11:12:04 +00:00
Gabor Juhos
82705b30b3 ramips: OMNI-EMB-HPM.dts fixes 
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
 2013-04-08 11:12:03 +00:00
Gabor Juhos
909fabe574 ramips: add mdio-bus node to rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
 2013-04-08 11:12:02 +00:00
Gabor Juhos
78ee80f2e8 ramips: fix MDIO/PHY handling 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36271
 2013-04-08 11:12:01 +00:00
Gabor Juhos
30e5bae84a ramips: fix console speed for OMNI-EMB-HPM 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
 2013-04-08 08:24:51 +00:00
Gabor Juhos
cd7ce5226d ramips: avoid invalid pointer dereference in pinmux code 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36269
 2013-04-08 08:24:50 +00:00
Gabor Juhos
4c85227cf4 ramips: TEW-692GR.dts fixes 
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
 2013-04-08 07:11:35 +00:00
Gabor Juhos
97635d7a8e ramips: add PCI node into RTN56U.dts 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
 2013-04-07 20:56:22 +00:00
Gabor Juhos
474264f64c ramips: add PCI node for rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
 2013-04-07 20:56:21 +00:00
Gabor Juhos
6c8951313c ramips: rt3883: enable PCI support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36262
 2013-04-07 20:56:20 +00:00
Gabor Juhos
b6b0a8fbee ramips: fix RT3883 PCI driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36261
 2013-04-07 20:56:18 +00:00
Gabor Juhos
1700bf5b2e ramips: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36260
 2013-04-07 17:05:05 +00:00
Gabor Juhos
6de8743e44 ramips: add missing cpu-feature-override.h files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36259
 2013-04-07 17:05:04 +00:00
Gabor Juhos
68875710fd ramips: fix broken patch name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36258
 2013-04-07 16:26:27 +00:00
Gabor Juhos
16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
 2013-04-07 16:24:33 +00:00
Gabor Juhos
9e6ae6ab5d x86/generic: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36256
 2013-04-07 15:53:17 +00:00
Gabor Juhos
0d0bfe3d41 x86/generic: switch to 3.8 
Only tested within a VM.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36255
 2013-04-07 15:53:15 +00:00
Gabor Juhos
f5d28ea3ce x86/generic: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36254
 2013-04-07 15:53:13 +00:00
Gabor Juhos
71a51e3b91 x86/alix2: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36253
 2013-04-07 15:53:11 +00:00
Gabor Juhos
15d311ec18 x86/alix2: switch to 3.8 
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36252
 2013-04-07 15:53:09 +00:00
Gabor Juhos
9d05b1b683 x86/alix2: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36251
 2013-04-07 15:53:08 +00:00
Gabor Juhos
89f690843f x86: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36250
 2013-04-07 15:53:05 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
 2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
 2013-04-07 14:46:10 +00:00
Gabor Juhos
66fbe78a93 ramips: pinmux fixes 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
 2013-04-07 14:46:09 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
 2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
 2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files 
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
 2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
 2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches 
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
 2013-04-07 11:37:15 +00:00
Felix Fietkau
fde143b66f cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36241
 2013-04-07 11:24:30 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files 
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
 2013-04-07 08:19:10 +00:00
Hauke Mehrtens
4a46687d25 brcm47xx: use old partition names again for kernel 3.8 
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.

SVN-Revision: 36235
 2013-04-06 22:22:26 +00:00
Hauke Mehrtens
204bde8d98 brcm47xx: fix error in board detection when nvram is not available. 
SVN-Revision: 36234
 2013-04-06 19:02:25 +00:00
Gabor Juhos
d45ef216e6 linux/3.8: implement pcibios_get_phb_of_node for MIPS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36233
 2013-04-06 17:33:03 +00:00
Gabor Juhos
51fa28e2c2 linux/3.8: backport devm_ioremap_resource from 3.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36232
 2013-04-06 17:33:00 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts 
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
 2013-04-06 17:19:35 +00:00
Gabor Juhos
747b795b56 generic: rtl8367: add compatible string with vendor prefix 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36230
 2013-04-06 17:19:31 +00:00
Gabor Juhos
f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of 
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
 2013-04-06 17:03:09 +00:00
Gabor Juhos
32d3b456f0 linux/3.8: add more missing symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
 2013-04-06 16:56:47 +00:00
Gabor Juhos
89539462a8 linux/3.8: add missing symbol 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36226
 2013-04-06 16:38:36 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts 
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
 2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts 
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
 2013-04-06 12:37:38 +00:00
Gabor Juhos
4becd8590c ramips: rt3883: enable the RTL8367 driver 
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
 2013-04-06 12:37:37 +00:00
Gabor Juhos
38bd9b4337 generic: rtl8367: allow to load extif config from OF 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36220
 2013-04-06 12:37:36 +00:00
Gabor Juhos
585d19d168 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36219
 2013-04-06 12:37:34 +00:00
Gabor Juhos
68c931c637 generic: rtl8367: add vendor prefix to the compatible string 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36218
 2013-04-06 12:37:32 +00:00
Gabor Juhos
348640f4b3 ramips: rt3883: sync 3.8 config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
 2013-04-06 12:37:31 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
 2013-04-06 11:46:34 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
Gabor Juhos
202fb45deb refresh kernel configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36214
 2013-04-06 11:40:41 +00:00
John Crispin
df7af06f1f fix dir-615 h1 network config 
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
 2013-04-05 23:37:45 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
 2013-04-05 23:10:42 +00:00
Florian Fainelli
495296bba9 malta: add le64 and be64 sub targets 
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36211
 2013-04-05 12:36:48 +00:00
Florian Fainelli
12b925dcbf malta: move 32-bits options to subtarget config 
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36210
 2013-04-05 12:36:45 +00:00
Florian Fainelli
5eb8ba7f19 malta: move endianness kernel configuration to subtarget 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36209
 2013-04-05 12:36:41 +00:00
Florian Fainelli
46dfa04a08 malta: enable mips16 feature flag 
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36203
 2013-04-05 12:36:16 +00:00
John Crispin
d9bb7ff7a5 Migrate lantiq platform to common led helper functions 
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
 2013-04-03 10:01:07 +00:00
John Crispin
a4c745ee74 add a missing patch that makes board detection work again 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
 2013-04-03 10:01:03 +00:00
John Crispin
c838ec2391 Patch for invoking (pre)init 
http://patchwork.openwrt.org/patch/3485/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36183
 2013-04-03 10:00:50 +00:00
John Crispin
93899a1329 add profile for tenda w150m board 
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
 2013-04-03 10:00:21 +00:00
John Crispin
7e54357bd5 fix ALL5002 default package selection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
 2013-04-03 10:00:16 +00:00
John Crispin
37401dca92 Build WW factory image for DAP-1350 
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
 2013-04-03 10:00:12 +00:00
John Crispin
910b705155 add Huawei D105 
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
 2013-04-03 10:00:08 +00:00
John Crispin
c1710901c5 add profile for the Edimax 3g-6200NL board 
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
 2013-04-03 10:00:03 +00:00
John Crispin
f3643374c4 there is no ttyS1 console 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
 2013-04-03 09:59:59 +00:00
John Crispin
99e0ff1123 make v3.8 the default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
 2013-04-03 09:59:55 +00:00
John Crispin
c8d5f5e0ef add new image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
 2013-04-03 09:59:51 +00:00
John Crispin
770b28f146 add the dts files that describe the boards in future 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
 2013-04-03 09:59:46 +00:00
John Crispin
2328e8389e fix upvel profile names 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
 2013-04-03 09:59:41 +00:00
John Crispin
94972a5268 fix rt3883 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
 2013-04-03 09:59:37 +00:00
John Crispin
0716ae8abe fix rt305x config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
 2013-04-03 09:59:33 +00:00
John Crispin
dce4945972 mark rt288x broken until the test hardware arrives in the mail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
 2013-04-03 09:59:16 +00:00
John Crispin
46f141637c add patches for v3.8 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
 2013-04-03 09:59:10 +00:00
John Crispin
4f86ea43ca remove old ralink 3.8 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
 2013-04-03 09:58:48 +00:00
John Crispin
d4db00205d move files to files-3.7 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
 2013-04-03 09:58:44 +00:00
John Crispin
86a691144b add feature gpio 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
 2013-04-03 09:58:37 +00:00
John Crispin
1105bd2897 add OF support to rtl8367b driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36159
 2013-04-03 09:58:33 +00:00
John Crispin
cc34858d4a make firmware loading work on v3.9 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36158
 2013-04-03 09:58:28 +00:00
Felix Fietkau
72f5901eb1 mpc85xx: enable ath9k and wpad-mini by default 
SVN-Revision: 36142
 2013-04-01 09:53:29 +00:00
Hauke Mehrtens
98ef9e5411 brcm47xx: generate images for Linksys E.... models 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36139
 2013-03-27 15:51:28 +00:00
Hauke Mehrtens
b4eabad019 gemini: remove usage of ehci_port_power() it was removed in kernel 3.8 
SVN-Revision: 36138
 2013-03-27 15:48:07 +00:00
Hauke Mehrtens
31c9452120 brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. 
SVN-Revision: 36137
 2013-03-27 15:35:52 +00:00
Hauke Mehrtens
a9e5a178ef brcm47xx: generate images for more WRT...N models 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36136
 2013-03-27 15:34:55 +00:00
Imre Kaloz
b92e750027 upgrade to 3.9-rc4, disable unsupported boards 
SVN-Revision: 36128
 2013-03-25 14:18:32 +00:00
Imre Kaloz
c90078ce87 refresh patches against -rc4 
SVN-Revision: 36127
 2013-03-25 13:53:48 +00:00
Imre Kaloz
f26378fd7c add missing symbols 
SVN-Revision: 36126
 2013-03-25 13:53:17 +00:00
Gabor Juhos
f7da2127ab ar71xx: fix ethernet LEDs on the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36122
 2013-03-25 06:40:03 +00:00
Gabor Juhos
39c132d154 ar71xx: add GPIO output select values for AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36121
 2013-03-25 06:40:00 +00:00
Gabor Juhos
849201b1d8 ar71xx: add default LED configuration for the WL-WRD3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36120
 2013-03-24 21:07:21 +00:00
Gabor Juhos
cd5cca4ba8 ar71xx: fix USB power GPIO on the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36119
 2013-03-24 19:23:47 +00:00
Gabor Juhos
4daefc9480 ar71xx: remove numeric suffix of the TL-WDR3500 USB LED 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36118
 2013-03-24 19:23:45 +00:00
Gabor Juhos
a4a2a7189f ar71xx: add diag support for the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36117
 2013-03-24 19:23:43 +00:00
Gabor Juhos
38c991311b ar71xx: add default switch configuration for the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36116
 2013-03-24 19:23:36 +00:00
Hauke Mehrtens
bb81e695f9 kernel: add missing config options for au1000 target 
SVN-Revision: 36115
 2013-03-24 14:01:38 +00:00
Hauke Mehrtens
18c47be19a kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option. 
SVN-Revision: 36102
 2013-03-21 14:56:04 +00:00
Hauke Mehrtens
4995f23669 kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected 
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.

SVN-Revision: 36101
 2013-03-21 14:50:59 +00:00
Hauke Mehrtens
d5cf67297a brcm47xx: generate images for some more devices 
These devices should be supported by trunk now.

SVN-Revision: 36099
 2013-03-20 22:01:18 +00:00
Hauke Mehrtens
c9544f4af0 kernel: add some fixes for kernel 3.9 
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.

SVN-Revision: 36098
 2013-03-20 21:59:24 +00:00
Hauke Mehrtens
99638c5288 kernel: add some missing config options for kernel 3.9 
SVN-Revision: 36097
 2013-03-20 21:53:51 +00:00
Florian Fainelli
b1cc7a90a4 kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193) 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36091
 2013-03-19 14:13:39 +00:00
Florian Fainelli
fe157ea1ba uml: remove 3.6 kernel patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36080
 2013-03-17 19:47:04 +00:00
Florian Fainelli
1898218119 uml: remove 3.3. kernel patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36079
 2013-03-17 19:46:59 +00:00
Florian Fainelli
c36db5f66a uml: switch to 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36078
 2013-03-17 19:46:54 +00:00
Florian Fainelli
a987d1aaa3 uml: add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36077
 2013-03-17 19:46:49 +00:00
Florian Fainelli
499f92c3db uml: remove 3.2 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36076
 2013-03-17 19:46:43 +00:00
Florian Fainelli
ce33aaafcf ep93xx: switch to 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36075
 2013-03-17 19:46:37 +00:00
Florian Fainelli
a5551d366a kernel: refresh 3.9 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36074
 2013-03-17 19:46:32 +00:00
Florian Fainelli
472bb8d51a ep93xx: add support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36073
 2013-03-17 19:46:25 +00:00
Florian Fainelli
743e9e7009 ep93xx: account for sound soc directory rename in 3.7 
sound/soc/ep93xx -> sound/soc/cirrus

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36071
 2013-03-17 19:45:55 +00:00
Florian Fainelli
6a7100c760 kernel: set regmap-core module license 
Fixes the following issues:
[    7.660000] regmap_core: module license 'unspecified' taints kernel
[    7.690000] Disabling lock debugging due to kernel
[    7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[    7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[    7.720000] regmap_core: Unknown symbol devres_add (err 0
[    7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[    7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[    7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[    7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[    7.780000] regmap_core: Unknown symbol devres_free (err 0
[    7.800000] regmap_core: Unknown symbol devres_find (err 0
[    7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36070
 2013-03-17 19:45:48 +00:00
Florian Fainelli
7987c8d0dc au1000: remove support for 3.3. kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36067
 2013-03-17 14:33:47 +00:00
Florian Fainelli
c56c18168e au1000: switch to 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36066
 2013-03-17 14:33:41 +00:00
Florian Fainelli
5592a619d0 au1000: keep the MTX-1 watchdog pin low during boot 
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36065
 2013-03-17 14:33:36 +00:00
Florian Fainelli
d5c2e83fa5 ep93xx: remove 3.3 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36064
 2013-03-17 14:33:23 +00:00
Florian Fainelli
9cef30a519 mcs814x: use devm_request_and_ioremap in mcs814x-rng driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36063
 2013-03-17 14:33:18 +00:00
Florian Fainelli
8ed2299646 mcs814x: use devm_request_and_ioremap helper for nuport_mac driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36062
 2013-03-17 14:33:13 +00:00
Florian Fainelli
8bc84bac31 mcs814x: remove PCI code 
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36061
 2013-03-17 14:33:07 +00:00
Florian Fainelli
a9ef927cce mcs814x: implement MULTI_IRQ_HANDLER 
Allows us to get rid of the IRQ entry point assembly

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36060
 2013-03-16 22:25:47 +00:00
Florian Fainelli
18908139f3 mcs814x: use the standard device tree binding to represent a PHY node 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36059
 2013-03-16 22:25:41 +00:00
Gabor Juhos
1996cfe9dd mpc85xx: add profile and build image for the TL-WDR4900 v1 board 
Now that the ethernet switch is working, create firmware
images to make impatient users happy.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36051
 2013-03-15 16:11:45 +00:00
Gabor Juhos
72253b9073 generic: ar8216: start AR8327 switch from the probe routine 
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36050
 2013-03-15 16:06:28 +00:00
Gabor Juhos
5503686f69 generic: ar8216: add ar8xxx_start helper 
Move switch starting code into a separate function.
This makes it usable from other places.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36049
 2013-03-15 16:06:25 +00:00
Gabor Juhos
44ce8dac88 mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36048
 2013-03-15 15:53:06 +00:00
Gabor Juhos
7ba6a8d8e8 generic: ar8216: add OF configuration support for AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36047
 2013-03-15 15:50:08 +00:00
Gabor Juhos
ee12b1b7d5 generic: ar8216: separate platform_data based AR8327 code 
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36046
 2013-03-15 15:50:05 +00:00
Gabor Juhos
d88f66ae21 generic: ar8216: don't use platform_data in ar8327_init_port 
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36045
 2013-03-15 15:50:02 +00:00
Gabor Juhos
9d3f70d503 generic: ar8216: move the ar8327_get_port_init_status function 
It will be used in ar8327_probe routine.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36044
 2013-03-15 15:50:00 +00:00
Gabor Juhos
17d735fc46 generic: ar8216: simplify and rename ar8327_config_port 
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36043
 2013-03-15 15:49:57 +00:00
Gabor Juhos
3fee1bddbe generic: ar8216: remove superfluous pdata checks 
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36042
 2013-03-15 15:49:55 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3 
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
 2013-03-15 14:39:51 +00:00
Gabor Juhos
d614f8a880 ar71xx: build images for the TL-MR11U v2 
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]

Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36038
 2013-03-15 14:35:52 +00:00
Gabor Juhos
35d41db979 ar71xx: rw2458n - Use eeprom (art) from wifi card 
Use eeprom (art) from included wifi card, not hard coded in flash.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36037
 2013-03-15 14:35:50 +00:00