Commit graph

84 commits

Author SHA1 Message Date
John Crispin
cc5194cf03 ramips: add support for Airlink101 AR670W
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43153
2014-11-03 08:00:13 +00:00
John Crispin
7bac455a4c ramips: add support for Nexx WT3020 devices
SVN-Revision: 42983
2014-10-20 06:28:48 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
2014-10-10 08:56:43 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
bb9a23aca2 ramips: Hame: change LED name mpr-x -> hame
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42190
2014-08-18 13:09:39 +00:00
John Crispin
04e4ff282a ramips:support Lenovo AC1200 Wireless router
Lenovo AC1200 series has two types, Y1 and Y1S.
Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port.

Signed-off-by: Lintel <lintel.huang@gmail.com>

SVN-Revision: 41961
2014-08-03 11:13:52 +00:00
John Crispin
21845cb45d ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41939
2014-08-01 20:51:24 +00:00
John Crispin
c6674722b9 ramips: Fix LEDs on the Kingston MLW221
LED Fix up for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41933
2014-08-01 11:19:39 +00:00
John Crispin
5b4abf87d7 ramips: add support for Kingston MLW221
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41841
2014-07-26 20:36:22 +00:00
John Crispin
ba3988fb16 ramips: add support for WR8305RT board
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41584
2014-07-12 06:54:03 +00:00
John Crispin
6d213a644d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
2014-06-13 09:16:15 +00:00
John Crispin
813a7c3827 ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908
2014-06-02 12:42:52 +00:00
John Crispin
efd09832fe ramips: Support for Teltonika RUT5XX
Hi Hartmut,

Thanks for your feedback, I have reformated the patch accordingly.

Added support for Teltonika RUT5XX hardware.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>

SVN-Revision: 40907
2014-06-02 12:42:48 +00:00
John Crispin
cd5f3584e2 ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

SVN-Revision: 40554
2014-04-22 08:08:51 +00:00
John Crispin
cb91087991 ramips: add Airlink101 AR725W userland support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40550
2014-04-22 08:08:35 +00:00
John Crispin
b56bef28d7 ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
John Crispin
beb29461ff ramips: Add userspace support for the Edimax BR-6475nD
The rt2x00 wifi driver may still need updating to
function with this device.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
John Crispin
3a64ddd0a1 ralink: add HLK-RM04 support
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39237
2014-01-12 12:07:40 +00:00
John Crispin
dce9b292bf ralink: add mt7620n support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38823
2013-11-16 20:28:52 +00:00
John Crispin
43de7c1cfa ralink: add support for 2 new mt7620 boards made by buffalo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38550
2013-10-28 06:47:31 +00:00
John Crispin
c0f6bf05f4 ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053
2013-09-19 05:56:46 +00:00
John Crispin
5722b32acf ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
https://dev.openwrt.org/ticket/14129

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38040
2013-09-18 16:31:37 +00:00
John Crispin
dc7164d4ef ramips: DIR-610-A1 Support
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
2013-08-14 19:35:27 +00:00
John Crispin
169e184521 ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37640
2013-08-01 14:31:15 +00:00
John Crispin
ce4228b417 ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37639
2013-08-01 14:31:09 +00:00
John Crispin
54968110f1 ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638
2013-08-01 14:31:04 +00:00
John Crispin
0dc3b44b0d ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
2013-08-01 14:30:58 +00:00
John Crispin
23d3b705df ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37636
2013-08-01 14:30:53 +00:00
John Crispin
8dd30fa775 ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
2013-07-27 09:23:52 +00:00
John Crispin
e6ef318802 base-files: diag does not need to insmod any drivers, procd already did it for us
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
John Crispin
fc9532aeaa ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

SVN-Revision: 36898
2013-06-10 08:24:56 +00:00
John Crispin
30786d2dd0 ramips: add support for belkin F7C027 wemo/homeautomatisation plug
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 36897
2013-06-10 08:24:50 +00:00
John Crispin
7bfab6e308 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
John Crispin
c7216d0cab ramips: Add support of D-link DIR-620D1
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
John Crispin
93899a1329 add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
John Crispin
910b705155 add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
John Crispin
b22cbac68f make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35988
2013-03-12 13:52:40 +00:00
Gabor Juhos
d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
Gabor Juhos
90011a99f3 ramips: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
Gabor Juhos
813aec6796 ramips: add user-space support for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
2013-02-02 17:21:05 +00:00
Gabor Juhos
b99b2ff553 ramips: add userspace support for the Edimax BR-6425
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
2013-02-02 17:01:50 +00:00
Gabor Juhos
9891603eb5 ramips: add user-space support for the Tenda 3G300M
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
Gabor Juhos
06edafd079 ramips: add user space support for the DIR-645
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
2012-10-18 07:23:03 +00:00