ramips: add MPR-A1 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568

target/linux/ramips/base-files/etc/diag.sh

@@ -55,6 +55,9 @@ get_status_led() {
 	mofi3500-3gn)
 		status_led="mofi3500-3gn:green:status"
 		;;
+	mpr-a1)
+		status_led="mpr-a1:red:power"
+		;;
 	mpr-a2)
 		status_led="mpr-a2:red:power"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -78,6 +78,7 @@ case "$FIRMWARE" in
 	freestation5 | \
 	hw550-3g | \
 	mofi3500-3gn | \
+	mpr-a1 | \
 	mpr-a2 | \
 	pwh2004 | \
 	nbg-419n | \

target/linux/ramips/base-files/etc/uci-defaults/01_leds

@@ -94,6 +94,9 @@ case $board in
 	mofi3500-3gn)
 		set_usb_led "mofi3500-3gn:green:usb"
 		;;
+	mpr-a1)
+		set_wifi_led "mpr-a1:blue:system"
+		;;
 	mpr-a2)
 		set_wifi_led "mpr-a2:blue:system"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -173,6 +173,7 @@ ramips_setup_macs()
 	broadway | \
 	dir-620-d1 | \
 	f5d8235-v1 | \
+	mpr-a1 | \
 	mpr-a2 | \
 	mzk-w300nh2 | \
 	nw718 | \

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -26,6 +26,7 @@ preinit_set_mac_address() {
 	dir-620-a1 |\
 	esr-9753 |\
 	freestation5 |\
+	mpr-a1 | \
 	mpr-a2 | \
 	nw718 |\
 	psr-680w |\

target/linux/ramips/base-files/lib/ramips.sh

@@ -118,6 +118,9 @@ ramips_board_detect() {
 	*"MoFi Network MOFI3500-3GN")
 		name="mofi3500-3gn"
 		;;
+	*"HAME MPR-A1")
+ 		name="mpr-a1"
+ 		;;
 	*"HAME MPR-A2")
  		name="mpr-a2"
  		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -45,6 +45,7 @@ platform_check_image() {
 	hw550-3g | \
 	hg255d | \
 	mofi3500-3gn | \
+	mpr-a1 | \
 	mpr-a2 | \
 	mzk-w300nh2 | \
 	nbg-419n | \

target/linux/ramips/dts/MPRA1.dts

@@ -0,0 +1,117 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "MPRA1", "ralink,rt5350-soc";
+	model = "HAME MPR-A1";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "sdram";
+			ralink,gpiomux = "jtag", "i2c", "mdio", "rgmii";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl064k";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		system {
+			label = "mpr-a1:blue:system";
+			gpios = <&gpio0 20 1>;
+		};
+		power {
+			label = "mpr-a1:red:power";
+			gpios = <&gpio0 17 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "reset";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 7 0>;
+		};
+		root_hub {
+			gpio-export,name = "root_hub";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 12 0>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -341,6 +341,7 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest
 Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
 
 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
 Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
 
 Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)

target/linux/ramips/rt305x/profiles/hame.mk

@@ -5,6 +5,18 @@
 # See /LICENSE for more information.
 #
 
+define Profile/MPRA1
+	NAME:=HAME MPR-A1
+	PACKAGES:=\
+		kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net
+endef
+
+define Profile/MPRA1/Description
+	Package set for HAME MPR-A1 board
+endef
+
+$(eval $(call Profile,MPRA1))
+
 define Profile/MPRA2
 	NAME:=HAME MPR-A2
 	PACKAGES:=\