ramips: DIR-610-A1 Support

http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
This commit is contained in:
John Crispin 2013-08-14 19:35:27 +00:00
parent 97a7daa72f
commit dc7164d4ef
9 changed files with 124 additions and 3 deletions

View file

@ -27,7 +27,7 @@ get_status_led() {
d105)
status_led="d105:red:power"
;;
dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1)
dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1)
status_led="d-link:green:status"
;;
dir-645)

View file

@ -68,6 +68,7 @@ case "$FIRMWARE" in
br6524n | \
carambola | \
d105 | \
dir-610-a1 | \
dir-615-h1 | \
dir-620-a1 | \
dir-620-d1 | \

View file

@ -77,6 +77,7 @@ case $board in
dir-810l)
ucidef_set_led_default "power" "POWER" "dlink:green:power" "1"
;;
dir-610-a1 |\
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;

View file

@ -77,6 +77,7 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "0 6t"
;;
dir-610-a1 | \
dir-615-h1 | \
mzk-w300nh2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@ -205,7 +206,8 @@ ramips_setup_macs()
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
dir-600-b1 |\
dir-610-a1)
lan_mac=$(mtd_get_mac_binary devdata 16388)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;

View file

@ -39,7 +39,8 @@ preinit_set_mac_address() {
asl26555 |\
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
dir-600-b1 |\
dir-610-a1)
mac=$(mtd_get_mac_binary devdata 16388)
ifconfig eth0 hw ether $mac 2>/dev/null
;;

View file

@ -73,6 +73,9 @@ ramips_board_detect() {
*"DIR-600 B2")
name="dir-600-b2"
;;
*"DIR-610 A1")
name="dir-610-a1"
;;
*"DIR-620 A1")
name="dir-620-a1"
;;

View file

@ -0,0 +1,100 @@
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "DIR-610-A1", "ralink,rt5350-soc";
model = "D-Link DIR-610 A1";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "jtag", "uartlite", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "f25l32pa", "m25p80";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x1f>;
ralink,led-polarity = <0>;
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
wps {
label = "d-link:green:wps";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
};
wmac@10180000 {
status = "okay";
};
};

View file

@ -280,6 +280,8 @@ endif
# RT305X Profiles
#
Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,ralink_default_fw_size_4M)
edimax_3g6200n_mtd_size=3735552
Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
@ -505,6 +507,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR-300-B1,$(1))
$(call Image/Build/Profile/DIR-600-B1,$(1))
$(call Image/Build/Profile/DIR-600-B2,$(1))
$(call Image/Build/Profile/DIR610A1,$(1))
$(call Image/Build/Profile/DIR-615-D,$(1))
$(call Image/Build/Profile/DIR-620-A1,$(1))
$(call Image/Build/Profile/DIR-620-D1,$(1))

View file

@ -18,3 +18,13 @@ endef
$(eval $(call Profile,DIR615H1))
define Profile/DIR610A1
NAME:=Dlink DIR-610 A1
PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer
endef
define Profile/DIR610A1/Description
Package set for Dlink DIR610 A1 board
endef
$(eval $(call Profile,DIR610A1))