KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19465 commits 1 branch 0 tags 154 MiB
Commit graph

7573 commits

Author SHA1 Message Date
Jo-Philipp Wich
c433bfb571 disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config 
SVN-Revision: 30024
 2012-02-03 19:47:55 +00:00
Jo-Philipp Wich
40867f1b68 x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/] 
SVN-Revision: 30023
 2012-02-03 19:21:41 +00:00
Jo-Philipp Wich
79a3fdb9da geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30022
 2012-02-03 18:16:27 +00:00
Jo-Philipp Wich
25d605ab0e net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30021
 2012-02-03 18:14:02 +00:00
Jo-Philipp Wich
7a36f3d2ff x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30019
 2012-02-03 18:02:57 +00:00
Jo-Philipp Wich
d13c3cd073 net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. 
SVN-Revision: 30013
 2012-02-03 14:19:29 +00:00
Felix Fietkau
d9ff9c44ee ar71xx: add usb on the pb92 board 
SVN-Revision: 30007
 2012-02-03 09:44:51 +00:00
Jonas Gorski
f99bf6517c x86: add 3.3 generic symbols 
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30002
 2012-02-02 21:01:59 +00:00
Jo-Philipp Wich
b6be49429b alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/] 
SVN-Revision: 30001
 2012-02-02 19:26:32 +00:00
Jo-Philipp Wich
7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility 
SVN-Revision: 30000
 2012-02-02 19:11:52 +00:00
Jo-Philipp Wich
bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad 
SVN-Revision: 29999
 2012-02-02 19:06:22 +00:00
Jo-Philipp Wich
047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest 
SVN-Revision: 29998
 2012-02-02 19:00:40 +00:00
Jo-Philipp Wich
1ae5715f2e geos: add missing files from previous commit 
SVN-Revision: 29997
 2012-02-02 18:59:51 +00:00
Jo-Philipp Wich
a1258ccaba geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/] 
SVN-Revision: 29996
 2012-02-02 18:58:20 +00:00
Jo-Philipp Wich
415a375eaa geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/] 
SVN-Revision: 29995
 2012-02-02 18:44:35 +00:00
Jo-Philipp Wich
5523eca4e5 net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] 
SVN-Revision: 29994
 2012-02-02 18:41:10 +00:00
Jonas Gorski
eca9950f63 kernel: add preliminary support for linux 3.3 
Based on 3.3-rc2

SVN-Revision: 29986
 2012-02-02 08:23:54 +00:00
Jo-Philipp Wich
3310df6b52 alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. 
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]

SVN-Revision: 29981
 2012-02-01 15:31:23 +00:00
Gabor Juhos
41bd6bd282 ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards 
SVN-Revision: 29978
 2012-01-31 20:49:34 +00:00
Gabor Juhos
c315ce403b ar71xx: merge DIR-600 A1 and DIR-615 E4 support 
SVN-Revision: 29976
 2012-01-31 18:37:29 +00:00
Gabor Juhos
dd47afc197 ar71xx: fix ethernet LEDs on the DIR-600-A1 board 
SVN-Revision: 29975
 2012-01-31 18:37:24 +00:00
Gabor Juhos
8200f0c61a ar71xx: unify LED names on D-Link boards 
SVN-Revision: 29974
 2012-01-31 18:37:15 +00:00
Gabor Juhos
faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4 
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
 2012-01-31 18:37:09 +00:00
Gabor Juhos
97e4ddd012 ar71xx: add support for TP-Link TL-MR11U 
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
 2012-01-31 18:37:01 +00:00
Gabor Juhos
8766f32b8c ar71xx: compress kernel binaries in Image/Prepare stage 
The lzma compressed kernel is used by one of the loaders.

SVN-Revision: 29971
 2012-01-31 18:36:54 +00:00
Gabor Juhos
d5d37febb4 ar71xx: use dynamically allocated partitions in wrt160nl_part 
SVN-Revision: 29970
 2012-01-31 18:36:51 +00:00
Gabor Juhos
44ed690cb3 ramips: change vlan_config for the ALFA W502U board 
This change moves the WAN port into a separate VLAN.

SVN-Revision: 29969
 2012-01-31 18:34:10 +00:00
Jonas Gorski
b3568b10c2 kernel: update linux 3.2 to 3.2.2 
SVN-Revision: 29967
 2012-01-31 09:44:00 +00:00
Jonas Gorski
1015fab0d7 kernel: update linux 3.1 to 3.1.10 
SVN-Revision: 29966
 2012-01-31 09:43:57 +00:00
Jonas Gorski
e67f4477bb kernel: update linux 3.0 to 3.0.18 
SVN-Revision: 29965
 2012-01-31 09:43:53 +00:00
Florian Fainelli
882eddbf92 build 96348R images 
SVN-Revision: 29960
 2012-01-30 21:12:32 +00:00
Florian Fainelli
0700644b16 remove support for 2.6.39 
SVN-Revision: 29959
 2012-01-30 21:12:28 +00:00
Florian Fainelli
038fc8eac3 bump to 3.0.17 
SVN-Revision: 29958
 2012-01-30 21:12:25 +00:00
Florian Fainelli
8100658a30 add missing config symbols 
Thanks KanjiMonster

SVN-Revision: 29955
 2012-01-30 10:53:20 +00:00
Florian Fainelli
0501ea063b fix gpiommc build failure with 3.2 
SVN-Revision: 29954
 2012-01-30 10:53:16 +00:00
Jo-Philipp Wich
55b5e15bff create a config-3.2 for upcoming changes, rebase config-default to 2.6.39 
SVN-Revision: 29953
 2012-01-30 02:13:37 +00:00
Florian Fainelli
8c4813b75e add default and Sim.One profiles 
SVN-Revision: 29942
 2012-01-29 15:00:36 +00:00
Florian Fainelli
0bb50678de add 3.2 support 
SVN-Revision: 29941
 2012-01-29 15:00:33 +00:00
Florian Fainelli
e82f06639e add another 3.2 framebuffer symbol 
SVN-Revision: 29940
 2012-01-29 15:00:29 +00:00
Florian Fainelli
ad808cf7e6 add support for 3.2 kernel 
SVN-Revision: 29939
 2012-01-29 15:00:25 +00:00
Florian Fainelli
eeb00634a7 add support for the Atheros AP113 reference board 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
 2012-01-28 13:19:49 +00:00
Florian Fainelli
405a0f3905 refresh 3.2 patches 
SVN-Revision: 29934
 2012-01-28 13:19:43 +00:00
Hauke Mehrtens
d1c07b3657 brcm47xx: add fix for cardbus host controller 
These devices have two devices on the bus, the host controller itself and the device.

SVN-Revision: 29923
 2012-01-27 20:10:51 +00:00
Gabor Juhos
b9b768b8d3 ar71xx: use 64k block size for WZR-HP-AG300H 
SVN-Revision: 29917
 2012-01-27 10:42:41 +00:00
Gabor Juhos
ac8116739a ar71xx: fix sysupgrade image building of atheros boards after r29899 
SVN-Revision: 29916
 2012-01-27 07:51:09 +00:00
Gabor Juhos
013fe76b36 ar71xx: create the temporary directory before building initramfs images 
Thanks to Florian for reporting.

SVN-Revision: 29915
 2012-01-26 21:28:34 +00:00
Gabor Juhos
a5538a18d4 ar71xx: create a profile and build images for Compex WPE72 
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29914
 2012-01-26 17:01:44 +00:00
Gabor Juhos
e1e84badaa ar71xx: add support for Compex WPE72/WPE72NX 
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
 2012-01-26 17:01:41 +00:00
Gabor Juhos
1c4f6b4308 generic: add WPE72 ID to myloader.h 
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29911
 2012-01-26 17:01:38 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards 
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
 2012-01-26 10:44:23 +00:00