ar71xx: add support for Compex WPE72/WPE72NX

This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
This commit is contained in:
Gabor Juhos 2012-01-26 17:01:41 +00:00
parent 1c4f6b4308
commit e1e84badaa
11 changed files with 230 additions and 4 deletions

View file

@ -124,7 +124,8 @@ ap83 |\
jwap003 |\
pb42 |\
pb44 |\
routerstation)
routerstation|\
wpe72)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;

View file

@ -301,6 +301,9 @@ ar71xx_board_detect() {
*WP543)
name="wp543"
;;
*WPE72)
name="wpe72"
;;
*"WNDR3700/WNDR3800/WNDRMAC")
wndr3700_board_detect "$machine"
;;

View file

@ -56,6 +56,7 @@ CONFIG_AR71XX_MACH_WHR_HP_G300N=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WPE72=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_AG300H=y

View file

@ -66,6 +66,7 @@ CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNR2000=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WZR_HP_AG300H=y

View file

@ -214,6 +214,16 @@ config AR71XX_MACH_WP543
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
config AR71XX_MACH_WPE72
bool "Compex WPE72 board support"
select SOC_AR724X
select MYLOADER
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_PB42_PCI if PCI
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
config AR71XX_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X

View file

@ -71,6 +71,7 @@ obj-$(CONFIG_AR71XX_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o
obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_AR71XX_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o

View file

@ -0,0 +1,97 @@
/*
* Compex WPE72 board support
*
* Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include<asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-pb42-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#define WPE72_GPIO_RESET 12
#define WPE72_GPIO_LED_DIAG 13
#define WPE72_GPIO_LED_1 14
#define WPE72_GPIO_LED_2 15
#define WPE72_GPIO_LED_3 16
#define WPE72_GPIO_LED_4 17
#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
static struct gpio_led wpe72_leds_gpio[] __initdata = {
{
.name = "wpe72:green:led1",
.gpio = WPE72_GPIO_LED_1,
.active_low = 1,
}, {
.name = "wpe72:green:led2",
.gpio = WPE72_GPIO_LED_2,
.active_low = 1,
}, {
.name = "wpe72:green:led3",
.gpio = WPE72_GPIO_LED_3,
.active_low = 1,
}, {
.name = "wpe72:green:led4",
.gpio = WPE72_GPIO_LED_4,
.active_low = 1,
}, {
.name = "wpe72:green:diag",
.gpio = WPE72_GPIO_LED_DIAG,
.active_low = 1,
}
};
static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPE72_GPIO_RESET,
}
};
static const char *wpe72_part_probes[] = {
"MyLoader",
NULL,
};
static struct flash_platform_data wpe72_flash_data = {
.part_probes = wpe72_part_probes,
};
static void __init wpe72_setup(void)
{
ar71xx_add_device_m25p80(&wpe72_flash_data);
ar71xx_add_device_mdio(0, 0x0);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
pb42_pci_init();
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
wpe72_leds_gpio);
ar71xx_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wpe72_gpio_keys),
wpe72_gpio_keys);
}
MIPS_MACHINE(AR71XX_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);

View file

@ -79,6 +79,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
AR71XX_MACH_WP543, /* Compex WP543 */
AR71XX_MACH_WPE72, /* Compex WPE72 */
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */

View file

@ -112,6 +112,9 @@ static int __init ar71xx_prom_init_myloader(void)
case DEVID_COMPEX_WP543:
ar71xx_prom_append_cmdline("board", "WP543");
break;
case DEVID_COMPEX_WPE72:
ar71xx_prom_append_cmdline("board", "WPE72");
break;
default:
printk(KERN_WARNING "prom: unknown device id: %x\n",
mylo->did);

View file

@ -0,0 +1,96 @@
/*
* Compex WPE72 board support
*
* Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include<asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#include "pci.h"
#define WPE72_GPIO_RESET 12
#define WPE72_GPIO_LED_DIAG 13
#define WPE72_GPIO_LED_1 14
#define WPE72_GPIO_LED_2 15
#define WPE72_GPIO_LED_3 16
#define WPE72_GPIO_LED_4 17
#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
static struct gpio_led wpe72_leds_gpio[] __initdata = {
{
.name = "wpe72:green:led1",
.gpio = WPE72_GPIO_LED_1,
.active_low = 1,
}, {
.name = "wpe72:green:led2",
.gpio = WPE72_GPIO_LED_2,
.active_low = 1,
}, {
.name = "wpe72:green:led3",
.gpio = WPE72_GPIO_LED_3,
.active_low = 1,
}, {
.name = "wpe72:green:led4",
.gpio = WPE72_GPIO_LED_4,
.active_low = 1,
}, {
.name = "wpe72:green:diag",
.gpio = WPE72_GPIO_LED_DIAG,
.active_low = 1,
}
};
static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPE72_GPIO_RESET,
}
};
static const char *wpe72_part_probes[] = {
"MyLoader",
NULL,
};
static struct flash_platform_data wpe72_flash_data = {
.part_probes = wpe72_part_probes,
};
static void __init wpe72_setup(void)
{
ath79_register_m25p80(&wpe72_flash_data);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_usb();
ath79_register_pci();
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
wpe72_leds_gpio);
ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wpe72_gpio_keys),
wpe72_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,17 +16,77 @@
@@ -16,17 +16,78 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@ -68,6 +68,7 @@
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
@ -174,7 +175,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -54,6 +127,349 @@ config ATH79_MACH_PB44
@@ -54,6 +127,359 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@ -253,6 +254,16 @@
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_WPE72
+ bool "Compex WPE72/WPE72NX board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_DIR_600_A1
+ bool "D-Link DIR-600 rev. A1 support"
+ select SOC_AR724X
@ -586,7 +597,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -36,8 +36,53 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
@@ -36,8 +36,54 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
@ -634,6 +645,7 @@
+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o