KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22557 commits 1 branch 0 tags 154 MiB
Commit graph

9402 commits

Author SHA1 Message Date
Hauke Mehrtens
c62d86ecb8 brcm47xx: update watchdog driver 
This watchdog driver should work with SoC having a PMU.

This fixes #11720.

SVN-Revision: 34323
 2012-11-24 20:07:25 +00:00
Jonas Gorski
60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices. 
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
 2012-11-24 14:19:22 +00:00
Jonas Gorski
746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup. 
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
 2012-11-24 14:19:16 +00:00
Jonas Gorski
1baeede939 bcm63xx: fix spi transfer handling 
* Accept transfers without bits_per_word set.

* Work around the inability of the hardware of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34320
 2012-11-24 14:19:09 +00:00
Gabor Juhos
b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board 
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
 2012-11-23 20:55:34 +00:00
Gabor Juhos
49d4b5581d generic: ar8216: set delay values for SGMII mode on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34315
 2012-11-23 20:55:26 +00:00
Florian Fainelli
6b63716262 add preliminary support for musl 
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34314
 2012-11-23 20:02:29 +00:00
Jo-Philipp Wich
b73f22de1e imagebuilder: merge r25078 to align files/ handling with current buildroot 
SVN-Revision: 34301
 2012-11-22 19:46:54 +00:00
Gabor Juhos
3205b52d1c generic: ar8216: introduce ar8216_mib_op helper 
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.

This change also fixes a lockdep warning in
ar8216_mib_flush.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34297
 2012-11-22 10:33:03 +00:00
Gabor Juhos
10d30f2d2d swconfig: make it compatible with 3.7 
swconfig does not compile with 3.7 because

struct netlink_notify->pid    has been renamed to
struct netlink_notify->portid

and

struct genl_info->snd_pid     has been renamed to
struct genl_info->snd_portid

Use the new names and add compatibility patches
to 3.3 and 3.6.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34288
 2012-11-21 17:38:11 +00:00
John Crispin
f7ead0a2d5 adds proper package selection for dgn3500 
SVN-Revision: 34286
 2012-11-21 06:06:48 +00:00
Gabor Juhos
e20a0baa04 cns21xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34285
 2012-11-20 21:37:53 +00:00
Gabor Juhos
5c740aa23c generic: add some missing symbols for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34284
 2012-11-20 21:34:43 +00:00
Gabor Juhos
2a792f32b5 generic: ar8216: fix port number check in 'ar8xxx_mib_work_func' 
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34283
 2012-11-20 20:40:04 +00:00
Gabor Juhos
258b2f2dc2 generic: ar8216: remove an unblanced mutex_unlock call 
Fixes the following warning:

[   94.080000]
[   94.080000] =====================================
[   94.080000] [ BUG: bad unlock balance detected! ]
[   94.080000] 3.3.8 #2 Tainted: G           O
[   94.080000] -------------------------------------
[   94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] but there are no more locks to release!
[   94.080000]
[   94.080000] other info that might help us debug this:
[   94.080000] 2 locks held by swconfig/1220:
[   94.080000]  #0:  (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[   94.080000]  #1:  (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[   94.080000]
[   94.080000] stack backtrace:
[   94.080000] Call Trace:
[   94.080000] [<8028dc58>] dump_stack+0x8/0x34
[   94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[   94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[   94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[   94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[   94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[   94.080000] [<80222440>] genl_rcv+0x24/0x34
[   94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[   94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[   94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[   94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[   94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[   94.080000] [<8006ad78>] stack_done+0x20/0x40
[   94.080000]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34282
 2012-11-20 20:40:03 +00:00
Gabor Juhos
82b57b0c28 generic: ar8216: add missing locking calls 
Fixes the following lockdep warning:

[   19.160000] ------------[ cut here ]------------
[   19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[   19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[   19.210000] Call Trace:
[   19.220000] [<8028dc38>] dump_stack+0x8/0x34
[   19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[   19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[   19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[   19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[   19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[   19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[   19.250000] [<8008a630>] worker_thread+0x22c/0x334
[   19.260000] [<8008e544>] kthread+0x88/0x90
[   19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[   19.270000]
[   19.270000] ---[ end trace 22e9d696adfa6a08 ]---

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34281
 2012-11-20 20:40:00 +00:00
Gabor Juhos
c0f73ac607 generic: convert yaffs to use kuid_t and kgid_t on 3.6+ 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34280
 2012-11-20 17:45:24 +00:00
Gabor Juhos
188908e885 ar71xx: make rb750_nand driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
 2012-11-20 16:29:43 +00:00
Gabor Juhos
8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
 2012-11-20 16:29:42 +00:00
Gabor Juhos
4468fd7ae4 ar71xx: refresh rb4xx_nand patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34277
 2012-11-20 15:53:17 +00:00
Gabor Juhos
46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c 
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
 2012-11-20 14:40:22 +00:00
Gabor Juhos
674b91ce0e ar71xx: fix GPIO function selection for AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34275
 2012-11-20 14:27:17 +00:00
Gabor Juhos
d833ca527d ar71xx: restore rb4xx kernel partition size to the original value 
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
 2012-11-20 12:17:45 +00:00
Gabor Juhos
33a99ce46b ar71xx: install lzma compressed elf kernel image from wget2nand 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34273
 2012-11-20 12:17:44 +00:00
Gabor Juhos
68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image 
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
 2012-11-20 12:17:43 +00:00
Gabor Juhos
97867f8717 ar71xx/image: relink loader.elf image to LOADADDR 
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
 2012-11-20 12:17:41 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
 2012-11-20 07:19:10 +00:00
Gabor Juhos
6c1fbb2d5c mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz 
[juhosg: move ramips specific stuff into a followup patch]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34269
 2012-11-20 07:19:09 +00:00
Gabor Juhos
8e4cefc7f8 refresh all kernel configurations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34267
 2012-11-20 07:19:06 +00:00
Jonas Gorski
8dc72c5c4d Revert "target specific patches have nothing to do in generic.." 
This reverts commit r34230, as it is causing build failures:

 make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1

Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.

SVN-Revision: 34255
 2012-11-19 12:38:26 +00:00
Imre Kaloz
4c043300fc fix 820-usb_add_usb_find_device_by_name.patch 
SVN-Revision: 34254
 2012-11-19 10:56:09 +00:00
Hauke Mehrtens
4fa5781a95 kernel: refresh patches 
SVN-Revision: 34253
 2012-11-18 21:40:30 +00:00
Hauke Mehrtens
86cc79ac98 brcm47xx: add support for kernel 3.6 
This is based on the patch by Peter Wagner.

SVN-Revision: 34252
 2012-11-18 21:27:00 +00:00
Hauke Mehrtens
db763080f4 kernel: add missing generic config options for 3.6+ 
SVN-Revision: 34250
 2012-11-18 20:54:53 +00:00
Hauke Mehrtens
c159c7a462 kernel: add CONFIG_XZ_DEC=y to generic 
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.

SVN-Revision: 34249
 2012-11-18 20:48:53 +00:00
Gabor Juhos
d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images 
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
 2012-11-18 20:25:13 +00:00
Imre Kaloz
935ca3f3eb add 3.7-rc6 support (patch 820 still has to be fixed) 
SVN-Revision: 34247
 2012-11-18 18:52:38 +00:00
Gabor Juhos
863657d040 generic: ar8216: add MIB counter support for the AR8216 switch as well 
Thanks to Jonas Gorski for the reference URL.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34245
 2012-11-18 16:21:00 +00:00
Gabor Juhos
98f30aac8e generic: ar8216: rename AR8216_*_STATS_* defines 
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.

Thanks to Jonas Gorski for the report.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34244
 2012-11-18 16:20:56 +00:00
Gabor Juhos
9abd8cd004 generic ar8216: allow to read/reset MIB counters via swconfig 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34243
 2012-11-18 12:26:35 +00:00
Gabor Juhos
4b17323b51 generic: ar8216: use dynamically allocated private data in ar8216_probe 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34242
 2012-11-18 12:26:34 +00:00
Gabor Juhos
169e596268 ar71xx: add user-space support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34240
 2012-11-18 10:18:02 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
31881357af ar71xx: create profile and build image for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
 2012-11-18 09:32:41 +00:00
Gabor Juhos
9da2c85b67 ar71xx: enable sysupgrade for the OpenMesh MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34235
 2012-11-18 09:32:39 +00:00
Gabor Juhos
6380301d01 ar71xx: rename om2p.sh upgrade script to openmesh.sh 
It will be used on other boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34234
 2012-11-18 09:32:37 +00:00
Gabor Juhos
d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
 2012-11-18 09:32:36 +00:00
Gabor Juhos
c3174179b7 ar71xx: add user-space support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34232
 2012-11-18 09:32:35 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Imre Kaloz
b220071cd2 target specific patches have nothing to do in generic.. 
SVN-Revision: 34230
 2012-11-18 09:22:38 +00:00
Gabor Juhos
c90128ce31 generic: remove temporary config file introduced in r34227 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34229
 2012-11-18 08:51:56 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
Florian Fainelli
a4c205011b move patches to patches-2.6.36 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34220
 2012-11-16 16:32:55 +00:00
Florian Fainelli
974b9f5c9a remove broken flag 
The SPARC qemu target works like a charm with the following qemu command-line:

qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34219
 2012-11-16 16:32:52 +00:00
Florian Fainelli
5261a171e9 update to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34218
 2012-11-16 16:32:49 +00:00
Florian Fainelli
7e199fcc06 add missing framebuffer config symbol 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34217
 2012-11-16 16:32:45 +00:00
Florian Fainelli
b7f2f14801 advertise jffs2, squashfs and ext4 features 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34216
 2012-11-16 16:32:42 +00:00
Florian Fainelli
c6d9304d17 resync kernel configuration with 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34215
 2012-11-16 16:32:39 +00:00
Florian Fainelli
dd70319e6d build root filesystems and install them in $(BIN_DIR) 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34214
 2012-11-16 16:32:36 +00:00
Florian Fainelli
8ad0b56ba5 do not build crashlog on sparc too 
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34213
 2012-11-16 16:32:33 +00:00
Florian Fainelli
19811eddb4 switch to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34212
 2012-11-16 16:32:29 +00:00
Florian Fainelli
f98ac68e0e add support for 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34211
 2012-11-16 16:32:26 +00:00
Florian Fainelli
c555479127 move acx-mac80211 to the ar7 generic target 
None of the AC49x boards that we support actually have Wi-Fi.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34208
 2012-11-16 13:00:55 +00:00
Florian Fainelli
b763d47bfe 3.6: add some framebuffer related config symbols 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34207
 2012-11-16 13:00:51 +00:00
Florian Fainelli
bc73cf5345 push atm, br2684ctl and kmod-pppoa down the DSL Profile 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34206
 2012-11-16 13:00:48 +00:00
Hauke Mehrtens
485f9573f8 brcm47xx: revert r33935: check for .ELF header in partition parser 
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.

SVN-Revision: 34201
 2012-11-15 16:39:45 +00:00
Gabor Juhos
7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh 
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
 2012-11-14 14:18:33 +00:00
Gabor Juhos
ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
 2012-11-13 20:57:19 +00:00
Gabor Juhos
9c5c079329 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board 
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34197
 2012-11-13 20:57:18 +00:00
Gabor Juhos
75c1d3ccc2 ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device 
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34196
 2012-11-13 20:57:17 +00:00
Gabor Juhos
7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices 
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
 2012-11-13 20:57:15 +00:00
Gabor Juhos
f6c3a8ddd6 generic: refresh 3.6 patches 
SVN-Revision: 34194
 2012-11-13 20:57:13 +00:00
Florian Fainelli
e7f77f2742 fix badly named patch file 
SVN-Revision: 34193
 2012-11-13 17:39:44 +00:00
Florian Fainelli
857456aef8 switch to kernel 3.6.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34192
 2012-11-13 17:20:19 +00:00
Florian Fainelli
390b8eb864 fix CBUS UART registration 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34191
 2012-11-13 17:20:14 +00:00
Gabor Juhos
62c8ff19ad ar71xx: add profile and build image for the TL-WA7510N board 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34190
 2012-11-13 14:48:03 +00:00
Gabor Juhos
165b7d2173 ar71xx: user space support for the TL-WA7510N 
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34188
 2012-11-13 14:48:01 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
ce9d4fadfa ar71xx: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34186
 2012-11-13 14:47:58 +00:00
John Crispin
3b419e506c fixes ar9 / dgn3500 support 
SVN-Revision: 34180
 2012-11-13 08:54:14 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;) 
SVN-Revision: 34179
 2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
 2012-11-12 21:35:01 +00:00
Hauke Mehrtens
31541f81c3 brcm47xx: remove double definition of kmod-tg3 added in r34150 
SVN-Revision: 34176
 2012-11-12 21:34:00 +00:00
Hauke Mehrtens
bac93bdd8e brcm47xx: fix cfe config detection on WGT634U broken in r33920 
Thanks Russell Senior for reporting this.

SVN-Revision: 34175
 2012-11-12 21:32:33 +00:00
Luka Perkov
00243027dd cns3xxx: merge gpio patches 
SVN-Revision: 34174
 2012-11-12 19:27:30 +00:00
Luka Perkov
fb9b572f0a cns3xxx: fix build failure after r34168 
SVN-Revision: 34173
 2012-11-12 19:27:29 +00:00
Florian Fainelli
a8c492dbb3 MIPS: add a build fix for arch/mips/boot/compressed/decompress.c 
And get rid of the AR7 patch because at least the Alchemy SoC also needs it

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34170
 2012-11-12 12:49:47 +00:00
Imre Kaloz
5cddb170cd reorder, rename and refresh patches 
SVN-Revision: 34169
 2012-11-12 09:18:00 +00:00
Imre Kaloz
77504ac06f split spi patch, follow mainline file naming 
SVN-Revision: 34168
 2012-11-12 08:22:14 +00:00
Imre Kaloz
9a780e0328 split the i2c patch, merge the retry fixup 
SVN-Revision: 34167
 2012-11-12 08:21:38 +00:00
John Crispin
5f30fe31b6 move redboot boardconfig patch into target folder 
SVN-Revision: 34166
 2012-11-12 07:56:37 +00:00
Imre Kaloz
527c473674 add support for the Tonze AP-422/425 
SVN-Revision: 34165
 2012-11-11 21:04:30 +00:00
Imre Kaloz
ee9e3bf82e refresh patch 
SVN-Revision: 34164
 2012-11-11 21:03:52 +00:00
Imre Kaloz
dcfd6cd5a4 generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot 
SVN-Revision: 34163
 2012-11-11 20:57:04 +00:00
Luka Perkov
16275bdd15 cns3xxx: convert dwc_otg patches to files 
SVN-Revision: 34162
 2012-11-11 20:03:58 +00:00
Luka Perkov
e38adfc912 cns3xxx: convert ethernet patches to files 
SVN-Revision: 34161
 2012-11-11 20:03:56 +00:00
Jonas Gorski
306894b88f bcm63xx: switch to 3.6.6 
SVN-Revision: 34160
 2012-11-11 19:57:17 +00:00
Imre Kaloz
4658e463d9 move fixed mapping of internal devices into vmalloc region 
SVN-Revision: 34158
 2012-11-11 19:29:27 +00:00
Florian Fainelli
9760644af4 advertise squashfs feature 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34157
 2012-11-11 19:26:54 +00:00
Florian Fainelli
dd541cbefa add support for Linux 3.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34156
 2012-11-11 19:26:50 +00:00
Florian Fainelli
f7fcb3c845 split kernel config between generic, au1500 and au1550 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34155
 2012-11-11 19:26:44 +00:00
Florian Fainelli
b363a7e491 add support for Linux 3.6 
SVN-Revision: 34154
 2012-11-11 18:41:09 +00:00
Florian Fainelli
854c504781 move files directory to files-3.3 
SVN-Revision: 34153
 2012-11-11 18:40:48 +00:00
Hauke Mehrtens
cadd36a303 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
 2012-11-11 17:30:33 +00:00
Florian Fainelli
62c9156af6 generate image for AC49x 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34149
 2012-11-11 16:11:39 +00:00
Florian Fainelli
9c7d221d47 create AC49x subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34148
 2012-11-11 16:11:34 +00:00
Florian Fainelli
668234c109 create generic subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34147
 2012-11-11 16:11:29 +00:00
Florian Fainelli
4891549bcd detect AC49x flash partitions 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34146
 2012-11-11 16:11:22 +00:00
Florian Fainelli
feb968d964 support AC49x bootloader environment 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34145
 2012-11-11 16:11:14 +00:00
Florian Fainelli
7d09c61d65 add AudioCodes AC49x platform support to kernel 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34144
 2012-11-11 16:11:09 +00:00
Florian Fainelli
d9b89db380 free memory below kernel offset 
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34143
 2012-11-11 16:11:00 +00:00
Jo-Philipp Wich
298a8e2300 x86/generic: don't disable usbfs (#12452) 
SVN-Revision: 34139
 2012-11-10 23:28:58 +00:00
Jonas Gorski
c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6 
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
 2012-11-10 22:10:47 +00:00
Jonas Gorski
15519bec9c bcm63xx: add two missing usb patches to 3.6 
SVN-Revision: 34137
 2012-11-10 19:59:16 +00:00
Jonas Gorski
06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 
SVN-Revision: 34136
 2012-11-10 19:59:07 +00:00
Imre Kaloz
f3f3f52259 cns3xxx: clean up pcie patches 
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34132
 2012-11-09 21:37:54 +00:00
John Crispin
71ddec8091 add more profiles 
SVN-Revision: 34131
 2012-11-09 19:26:58 +00:00
John Crispin
88e4d93802 a few more dts files (WIP) 
SVN-Revision: 34130
 2012-11-09 19:26:43 +00:00
John Crispin
a30b3066ce add mtd split and atm patch 
SVN-Revision: 34129
 2012-11-09 19:26:30 +00:00
Felix Fietkau
46288bf98e x86: use $(strip) for the at_keyboard check 
SVN-Revision: 34127
 2012-11-09 10:53:36 +00:00
Felix Fietkau
0a9e05fb0e x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) 
SVN-Revision: 34126
 2012-11-09 10:19:51 +00:00
Gabor Juhos
502661f685 generic: sanitize deps_initramfs list 
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34125
 2012-11-09 09:07:29 +00:00
Luka Perkov
965c190444 cns3xxx: exit from laguna late_initcall if not running on laguna board 
SVN-Revision: 34120
 2012-11-08 11:31:56 +00:00
Imre Kaloz
0da0dc0f2b cns3xxx: add PPS support for laguna 
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34115
 2012-11-08 05:42:31 +00:00
Imre Kaloz
efcdc21824 fixup symbol selection 
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI

SVN-Revision: 34114
 2012-11-08 05:40:34 +00:00
Luka Perkov
4d66b749de cns3xxx: fix coding style in board script 
SVN-Revision: 34113
 2012-11-07 23:12:06 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Jonas Gorski
f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup. 
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
 2012-11-07 09:01:03 +00:00
Imre Kaloz
f2b75b517b fixup typos in the compex patch 
SVN-Revision: 34104
 2012-11-07 07:51:24 +00:00
Jonas Gorski
a50d121d8e linux: export bcm963xx_tag.h to userspace 
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
 2012-11-06 15:21:46 +00:00
Luka Perkov
865933a0ec cns3xxx: refresh kernel config file 
SVN-Revision: 34102
 2012-11-06 11:16:43 +00:00
Luka Perkov
9a5c26d4ef cns3xxx: use files directory 
SVN-Revision: 34101
 2012-11-06 11:16:41 +00:00
John Crispin
7404e59bbd add OWRTDTB marker patch 
SVN-Revision: 34100
 2012-11-06 10:39:43 +00:00
John Crispin
3a1851964e add support for arv7525 
SVN-Revision: 34097
 2012-11-06 07:38:24 +00:00
Imre Kaloz
e141cbb0f9 refresh patches 
SVN-Revision: 34095
 2012-11-06 05:45:12 +00:00
Imre Kaloz
1a9dfd566e add default packages 
SVN-Revision: 34094
 2012-11-06 05:39:08 +00:00
Jonas Gorski
0722fd9c63 linux: generic: fix split_squashfs for 3.6 
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.

SVN-Revision: 34093
 2012-11-06 00:48:21 +00:00
Jonas Gorski
5bc7d81a20 bcm63xx: fix SPW303V images 
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
 2012-11-05 22:50:29 +00:00
Gabor Juhos
e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper 
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
 2012-11-05 13:23:28 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
e8669729bc kernel: update linux 3.6 to 3.6.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
 2012-11-05 13:22:09 +00:00
Imre Kaloz
d822ecfdf8 use the mainline machname for the compex boards 
SVN-Revision: 34083
 2012-11-05 11:38:23 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
5e43b934fd linux/3.3: backport an upstream GPIO patch 
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().

This will be used by ar71xx/ramips platforms.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34081
 2012-11-05 11:04:43 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
 2012-11-04 21:12:20 +00:00
Gabor Juhos
b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards 
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
 2012-11-04 20:15:18 +00:00
Felix Fietkau
6040b1d29a linux-3.6: fix portability of some includes files in tools/ used on the host 
SVN-Revision: 34068
 2012-11-04 17:01:15 +00:00
John Crispin
05fbb370dc 3.6 is not the default yet 
SVN-Revision: 34065
 2012-11-03 13:29:44 +00:00
John Crispin
a9ad36b7f1 adds dts files and make devicetree images buildable 
SVN-Revision: 34064
 2012-11-02 20:07:47 +00:00
John Crispin
c8ae6dac56 update ase target for 3.6 
SVN-Revision: 34063
 2012-11-02 20:07:41 +00:00
John Crispin
dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC 
SVN-Revision: 34062
 2012-11-02 20:07:36 +00:00
John Crispin
dd619da4fc adds 3.6 files, patches and config 
SVN-Revision: 34061
 2012-11-02 20:07:26 +00:00
John Crispin
736835343c move files/ -> files-3.3/ 
SVN-Revision: 34060
 2012-11-02 20:07:02 +00:00
John Crispin
fa316620a7 prepare Makefile for 3.6 
SVN-Revision: 34059
 2012-11-02 20:06:51 +00:00
Gabor Juhos
0005762690 generic: make yaffs work on 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34054
 2012-11-01 11:07:23 +00:00
Gabor Juhos
ffcb4b0fe1 generic: rename jffs2 patches 
Make room for the upcoming yaffs patches.
No functional changes.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34053
 2012-11-01 11:07:16 +00:00
Daniel Dickinson
7e0f8049fa Fix feeds.conf.default when no SVN info present 
SVN-Revision: 34051
 2012-11-01 07:15:49 +00:00
Gabor Juhos
6c8c3ee77d generic: use mtd_* helpers in the yaffs code 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34046
 2012-10-31 21:17:30 +00:00
Imre Kaloz
3c12bad276 move PCIe init to subsys init call 
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug.  I have modeled the cns3xxx PCIe init after
other ARM platforms.  Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.

Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34044
 2012-10-31 20:16:53 +00:00
Gabor Juhos
07a762c4c5 kernel: update linux 3.6 to 3.6.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34042
 2012-10-31 20:09:39 +00:00
Gabor Juhos
a4126685c6 generic: split yaffs-3.2-fix patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34041
 2012-10-31 19:33:12 +00:00
Gabor Juhos
4baeb543f0 generic: replace yaffs-2.6.39 patch 
Use backported upstream patches instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34032
 2012-10-31 15:12:45 +00:00
Gabor Juhos
b888c2deab generic: replace yaffs mutex_fix patch 
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34021
 2012-10-30 21:16:24 +00:00
Gabor Juhos
d54782d01a generic: replace yaffs symlink fix patch 
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34020
 2012-10-30 21:16:23 +00:00
Gabor Juhos
9a8ccc1a08 generic: rename yaffs patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34019
 2012-10-30 21:16:21 +00:00
Florian Fainelli
e14e4306c9 set earlyprintk UART to be the default Realview UART 
SVN-Revision: 34015
 2012-10-30 16:56:10 +00:00
Gabor Juhos
449f88df0f generic: fold yaffs_git_2010_10_20 patch to generic/files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34013
 2012-10-30 14:58:17 +00:00
Gabor Juhos
56190ed0fc generic: fold yaffs_cvs_2009_04_24 patch to generic/files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34012
 2012-10-30 14:58:13 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
 2012-10-29 17:24:30 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
Imre Kaloz
c0c69c974f add missing 3.6 symbols 
SVN-Revision: 33986
 2012-10-29 10:00:02 +00:00
Imre Kaloz
8e49dfe68a the uImage's filename will hardly change 
SVN-Revision: 33985
 2012-10-29 09:55:20 +00:00
Gabor Juhos
f7b2089704 generic: add more symbols for 3.6 
Also refresh the config file with kconfig.pl.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33984
 2012-10-29 09:08:59 +00:00
Gabor Juhos
e4db63fd64 ar71xx: add initial support for 3.6 
The nand subtarget is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33983
 2012-10-28 19:52:02 +00:00
Gabor Juhos
87186c5ed4 kernel: update linux 3.6 to 3.6.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33982
 2012-10-28 18:59:39 +00:00
Gabor Juhos
a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers 
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
 2012-10-28 12:21:15 +00:00
Gabor Juhos
9a37cf7ec6 generic: fix crashlog patch for 3.6 
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33970
 2012-10-28 09:50:50 +00:00
Gabor Juhos
e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6 
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
 2012-10-27 17:11:06 +00:00
Gabor Juhos
7640a7cc24 generic: fix tcp_window_check patch for 3.6 
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:

[    7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[    7.680000] Call Trace:
[    7.680000] [<80273bc4>] dump_stack+0x8/0x34
[    7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[    7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[    7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[    7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[    7.710000]
[    7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[    7.720000] nf_conntrack_ipv4: can't register pernet ops
[    7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[    7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[    7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[    7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[    7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[    7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[    7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[    7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[    7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33968
 2012-10-27 15:42:25 +00:00
Imre Kaloz
50be09e1f7 instead of updating the whole file, just add the additional boards 
SVN-Revision: 33966
 2012-10-27 13:29:36 +00:00
Imre Kaloz
1a4f117398 rename erase size variables 
SVN-Revision: 33964
 2012-10-27 10:50:55 +00:00
Imre Kaloz
549d5a6e34 add support for Netgear WN802T 
SVN-Revision: 33963
 2012-10-27 10:48:22 +00:00
Imre Kaloz
cf7aed0a76 don't enforce rootfs location 
SVN-Revision: 33962
 2012-10-27 10:43:47 +00:00
Imre Kaloz
702fd5cdb5 generate images for the D-Link DWL-3150 as well 
SVN-Revision: 33961
 2012-10-27 09:42:58 +00:00
Gabor Juhos
3a86affcdd ar71xx: enable sysupgrade for the CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33960
 2012-10-27 08:55:42 +00:00
Gabor Juhos
e99d557c08 ar71xx: add profile and build image for the CAP4200AG 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33958
 2012-10-27 08:55:40 +00:00
Gabor Juhos
9287e0c863 ar71xx: add user-space part for the CAP4200AG 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33957
 2012-10-27 08:55:39 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
 2012-10-27 08:55:38 +00:00
Gabor Juhos
3b7cb4eb4a ar71xx: add ath79_wmac_disable_[25]ghz helpers 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33955
 2012-10-27 08:55:37 +00:00
Gabor Juhos
e8fc46b7c5 generic: allow to disable [25]GHz support in ath9k via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33954
 2012-10-27 08:55:36 +00:00
Gabor Juhos
c92998f9d9 generic: use mtd_read in myloader parser 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33952
 2012-10-27 07:57:59 +00:00
Gabor Juhos
269872fe1e ar71xx: use mtd_read in wrt160nl_part 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
 2012-10-27 07:57:58 +00:00
Gabor Juhos
973eda6077 ar71xx: use mtd_read in tplinkpart 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
 2012-10-27 07:57:57 +00:00