openwrtv3

Author	SHA1	Message	Date
Gabor Juhos	6c2638c5e2	ar71xx: rename vsc7385 spi driver SVN-Revision: 29853	2012-01-22 13:51:57 +00:00
Gabor Juhos	bb16739db9	ar71xx: rename ap81 spi driver SVN-Revision: 29852	2012-01-22 13:51:56 +00:00
Gabor Juhos	5ef8b922fa	ar71xx: rename rb4xx spi drivers SVN-Revision: 29851	2012-01-22 13:51:54 +00:00
Gabor Juhos	aad175d5b6	ar71xx: rename the nxp_74hc153 driver SVN-Revision: 29850	2012-01-22 13:51:52 +00:00
Gabor Juhos	ef1c53b7b7	ar71xx: change board id of the UniFi board SVN-Revision: 29849	2012-01-22 13:51:50 +00:00
Gabor Juhos	f90e578903	ar71xx: include linux/module.h in the micrel phy driver SVN-Revision: 29848	2012-01-22 13:51:49 +00:00
Gabor Juhos	e9d8deaaed	ramips: add sysled and sysupgrade to wr512-3gn Patch from #10035. SVN-Revision: 29847	2012-01-22 13:43:23 +00:00
Gabor Juhos	8e662f28fe	generic: 3.2: don't disable lockdep for OOT modules SVN-Revision: 29846	2012-01-22 09:57:39 +00:00
Gabor Juhos	4625c9b5a4	generic: rtl8366: add rtl8366_smi_write_reg_noack helper After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. SVN-Revision: 29844	2012-01-21 22:44:09 +00:00
Hauke Mehrtens	26d4e1876c	brcm47xx: add support for pcie host controller on bcma based SoCs. This also adds minimal support for the BCMA43224 pcie wireless card. SVN-Revision: 29843	2012-01-21 22:39:20 +00:00
Gabor Juhos	557cf076b4	ramips: sysupgrade for ESR-9753 This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29824	2012-01-20 10:49:26 +00:00
Jonas Gorski	aa8f9171f2	kernel: fix OCF for linux 3.2 Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it. SVN-Revision: 29818	2012-01-19 19:51:54 +00:00
Jo-Philipp Wich	fc512193a0	add missing kernel symbols SVN-Revision: 29790	2012-01-19 01:57:22 +00:00
Jo-Philipp Wich	2fc3fe1d09	Make the grub timeout configurable on x86 targets Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> SVN-Revision: 29786	2012-01-19 01:14:45 +00:00
Jo-Philipp Wich	095f7f2da3	x86/config-3.2: add linux-3.2 symbols for x86 The following symbols are missing for x86, in sorted order. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 29783	2012-01-19 00:31:39 +00:00
Florian Fainelli	dbfeb5d158	fix thinko in 102-ehci_hcd_ignore_oc patch SVN-Revision: 29773	2012-01-18 07:56:02 +00:00
John Crispin	49eb3fd845	gigaset 76x * fixes leds * adds all leds found on the sx763 board * removes board_config from flash layout because wireless data is stored in kernel (ath5k) * fix button handling Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 29763	2012-01-17 12:10:35 +00:00
John Crispin	a2708d11e8	ramips: Rework ramips_eth to not require irqsave locking anymore Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 29762	2012-01-17 11:23:11 +00:00
Hauke Mehrtens	034cf5643f	brcm47xx: add support for kernel 3.2 SVN-Revision: 29756	2012-01-15 21:18:34 +00:00
Hauke Mehrtens	c3d134af12	brcm47xx: run kernel_oldconfig SVN-Revision: 29755	2012-01-15 14:53:32 +00:00
Imre Kaloz	f9e41adc80	add support for OMAP4 based boards, starting with the PandaBoard SVN-Revision: 29753	2012-01-14 23:02:56 +00:00
Imre Kaloz	6274648199	fixup arm xz support with recent changes SVN-Revision: 29750	2012-01-14 22:55:04 +00:00
Imre Kaloz	e65195c246	add missing symbols SVN-Revision: 29749	2012-01-14 22:53:28 +00:00
Felix Fietkau	b0479e2ca2	kernel: disable bridge igmp snooping in 3.2 as well SVN-Revision: 29747	2012-01-14 14:57:03 +00:00
Felix Fietkau	66895b7115	kernel: disable bridge igmp snooping by default to avoid multicast issues SVN-Revision: 29744	2012-01-14 13:50:25 +00:00
Jonas Gorski	9eb73ee6b7	kernel: ppc40x: ppc44x: add missing kernel config symbol SVN-Revision: 29742	2012-01-14 12:04:17 +00:00
Hauke Mehrtens	d5bc3a994b	brcm47xx: update usb driver Add workarround for BCM5357 and BCM4749. This patch contains the following fixes from George Kashperko: * separate subroutines for controller initialization workarounds - following CodingStyle recommendations; * __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG; * fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being kmalloc'ed is never freed anywhere while platform_device_add_resources will kmemdup resources right away; * fix compilation error in ssb_hcd_resume - it will fail as soon as CONFIG_PM is selected. SVN-Revision: 29734	2012-01-13 20:11:23 +00:00
Jo-Philipp Wich	9d497cb132	rtl8366: fix rtl8366_smi_detect() after r29677 SVN-Revision: 29732	2012-01-13 19:17:58 +00:00
Jonas Gorski	3883e71097	brcm63xx: add support for linux 3.2 SVN-Revision: 29731	2012-01-13 14:59:50 +00:00
Jonas Gorski	1bc0abb058	kernel: add support for linux 3.2.1 SVN-Revision: 29730	2012-01-13 14:55:07 +00:00
Jonas Gorski	f3f1075655	kernel: backport overlayfs v11 to 3.0 and 2.6.39 Should fix whiteout issues and missing files when using extroot. SVN-Revision: 29727	2012-01-13 14:42:53 +00:00
Jonas Gorski	c560444a58	kernel: update linux 3.1 to 3.1.9 SVN-Revision: 29726	2012-01-13 14:38:28 +00:00
Jonas Gorski	e49d3e1d5b	kernel: update linux 3.0 to 3.0.17 SVN-Revision: 29725	2012-01-13 14:10:44 +00:00
Felix Fietkau	e87bb77966	ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough SVN-Revision: 29719	2012-01-12 10:15:11 +00:00
Felix Fietkau	c33e016fa5	ar8216: do not strip vlan tags when running with vlan_enable=0 SVN-Revision: 29718	2012-01-12 10:15:08 +00:00
Gabor Juhos	fbf81c8e79	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c SVN-Revision: 29713	2012-01-11 18:00:50 +00:00
Daniel Dickinson	034b7f0ef5	Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. SVN-Revision: 29712	2012-01-11 13:47:48 +00:00
Gabor Juhos	67f62cf5cf	ar71xx: disable ath79 in order to get rid of Kconfig warnings SVN-Revision: 29711	2012-01-11 09:14:19 +00:00
Gabor Juhos	88d8cdd503	ar71xx: pb44_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29710	2012-01-11 09:14:18 +00:00
Gabor Juhos	e1b7995aef	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove SVN-Revision: 29709	2012-01-11 09:14:17 +00:00
Gabor Juhos	67444c7795	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers SVN-Revision: 29708	2012-01-11 09:14:15 +00:00
Gabor Juhos	0f566a376c	ar71xx: ar71xx_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29707	2012-01-11 09:14:14 +00:00
Gabor Juhos	09a6e3f662	ar71xx: ar71xx_spi: save and restore regs from probe/remove SVN-Revision: 29706	2012-01-11 09:14:13 +00:00
Gabor Juhos	714a9bd641	ar71xx: ar71xx_wdt: add shutdown handler SVN-Revision: 29705	2012-01-11 09:14:11 +00:00
Gabor Juhos	9727256330	ar71xx: refresh patches SVN-Revision: 29683	2012-01-07 19:36:43 +00:00
Gabor Juhos	4edff7d3ef	ar71xx: add a profile and build images for the TL-WR2543N/ND SVN-Revision: 29682	2012-01-07 19:36:42 +00:00
Gabor Juhos	a1dcbc66a6	ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680	2012-01-07 19:36:35 +00:00
Gabor Juhos	a56bdeff9d	ar71xx: allow to specify max read size for m25p80 Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. SVN-Revision: 29679	2012-01-07 19:36:33 +00:00
Gabor Juhos	8b567fb508	generic: add driver for the RTL8367R/M switches SVN-Revision: 29678	2012-01-07 19:36:31 +00:00
Gabor Juhos	87fb92ee03	generic: rtl8366: preparing for RTL8367 support * make clock delay configurable * make read,write commands configurable * use u16 for member and untag fields SVN-Revision: 29677	2012-01-07 19:36:30 +00:00
Gabor Juhos	43196813d7	generic: rtl8366_smi: add timeout message SVN-Revision: 29676	2012-01-07 19:36:25 +00:00
Gabor Juhos	67b2814842	ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675	2012-01-07 17:24:44 +00:00
Gabor Juhos	6c74274c8d	generic: improve MIPS kexec support It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). SVN-Revision: 29674	2012-01-07 16:29:16 +00:00
Gabor Juhos	f638c6207b	ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards SVN-Revision: 29672	2012-01-06 15:54:59 +00:00
Gabor Juhos	1e848b17ad	ar71xx: add support for Redwave RW2458N Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669	2012-01-06 07:20:59 +00:00
Gabor Juhos	84cd8a5ee0	ar71xx: fix RB-750 network configuration SVN-Revision: 29668	2012-01-06 07:20:54 +00:00
Gabor Juhos	8eb0b7ab3d	ar71xx: fix sections mismatch warnings in the nand drivers SVN-Revision: 29667	2012-01-05 18:08:33 +00:00
Gabor Juhos	232eb83f74	ar71xx: fix LED configuration on the RB-750 SVN-Revision: 29666	2012-01-05 18:08:28 +00:00
Gabor Juhos	d65c6fe720	ar71xx: create profile and build image for the ALFA AP96 board SVN-Revision: 29663	2012-01-04 21:13:57 +00:00
Gabor Juhos	b8f0d86115	ar71xx: add inital support for the ALFA Network AP96 board The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662	2012-01-04 21:13:54 +00:00
Gabor Juhos	807e046193	ar71xx: specify console kernel parameter for the Compex boards SVN-Revision: 29660	2012-01-04 17:30:59 +00:00
Gabor Juhos	923f3e3752	ar71xx: allow to use the command line hack on compex devices SVN-Revision: 29659	2012-01-04 17:30:58 +00:00
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	301b1b4f92	ar71xx: show correct model name on TL-WA701N/ND boards SVN-Revision: 29657	2012-01-04 17:30:55 +00:00
Gabor Juhos	ac68f0d8fa	ar71xx: add profile and build image for the TL-WA701N/ND boards SVN-Revision: 29656	2012-01-04 17:30:54 +00:00
Gabor Juhos	72019009c7	ar71xx: fix network configuration for the TL-WA901N/ND boards SVN-Revision: 29654	2012-01-04 17:30:52 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	5eb502d9c1	ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652	2012-01-04 17:30:49 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	88223f87d1	ar71xx: use the new om-watchdog package for OM2P Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648	2012-01-04 17:30:41 +00:00
Jo-Philipp Wich	a788f199c9	remove current RTSP support SVN-Revision: 29643	2012-01-04 00:29:29 +00:00
Jo-Philipp Wich	237282ae8c	backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802 ) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. SVN-Revision: 29642	2012-01-03 23:08:15 +00:00
Gabor Juhos	8854c90119	ar71xx: add profile and build factory image for the Hornet-UB board SVN-Revision: 29637	2012-01-01 19:30:29 +00:00
Gabor Juhos	1d3de89f3c	ar71xx: build images for the ALFA Network N2/N5 boards SVN-Revision: 29636	2012-01-01 19:30:28 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	fff02e6ea8	ar71xx: enable SWCONFIG_LEDS SVN-Revision: 29630	2011-12-31 15:02:40 +00:00
Gabor Juhos	5fa65cba6e	kernel: swconfig: introduce a generic switch LED trigger SVN-Revision: 29627	2011-12-31 15:02:30 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	975355a2b1	kernel: swconfig: add get_port_{link,stats} callbacks SVN-Revision: 29625	2011-12-31 15:02:24 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Gabor Juhos	244c322d25	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617	2011-12-28 08:43:43 +00:00
Gabor Juhos	f50b02b559	ramips: rt288x: change base address and window size of flash bank 0 SVN-Revision: 29616	2011-12-28 08:43:36 +00:00
Gabor Juhos	98437278c4	ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615	2011-12-28 08:43:32 +00:00
Gabor Juhos	76dacee995	ar71xx: enable sysupgrade support for airrouter Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614	2011-12-27 16:59:43 +00:00
Gabor Juhos	c6ee919b2a	ar71xx: fix sysupgrade on PB42/PB44 boards SVN-Revision: 29613	2011-12-27 16:57:01 +00:00
Gabor Juhos	723d8dd74f	ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612	2011-12-27 16:56:30 +00:00
Jo-Philipp Wich	9fa33ceee2	add missing config symbol SVN-Revision: 29610	2011-12-25 13:33:18 +00:00
Hauke Mehrtens	11125d68ed	brcm47xx: fix usb on more recent bcma based devices. SVN-Revision: 29605	2011-12-23 17:21:52 +00:00
Gabor Juhos	7b1e525b56	ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604	2011-12-23 14:27:16 +00:00
Gabor Juhos	2cb946f5b4	ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603	2011-12-23 14:27:10 +00:00
Gabor Juhos	03bce34384	ramips: define firmware partition for Omnima MiniEMBWiFi Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602	2011-12-23 14:27:05 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00
Jonas Gorski	8799627ef0	ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H Thanks netprince for reporting and testing. SVN-Revision: 29595	2011-12-21 19:32:40 +00:00
Jo-Philipp Wich	ebefe1eb3a	the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649 ) SVN-Revision: 29593	2011-12-21 01:27:48 +00:00
Hauke Mehrtens	0cd03df3b1	brcm47xx: remove patch starting adding brcm4716 to ssb brcm4716 is supported by bcma now we do not need this patch SVN-Revision: 29576	2011-12-19 23:55:20 +00:00
Hauke Mehrtens	5b8686c303	brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. SVN-Revision: 29575	2011-12-19 23:39:13 +00:00
Hauke Mehrtens	1aa5a61754	kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing SVN-Revision: 29574	2011-12-19 23:33:03 +00:00
Hauke Mehrtens	91d0ef6f19	brcm47xx: remove support for kernel 2.6.39 There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. SVN-Revision: 29573	2011-12-19 23:26:15 +00:00
Felix Fietkau	11013ad947	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 SVN-Revision: 29568	2011-12-19 09:04:15 +00:00
Felix Fietkau	0cc056cb7e	ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567	2011-12-18 22:20:17 +00:00
Gabor Juhos	5a0a2b2f1b	ar71xx: use 64kraw template on more TP-Link boards SVN-Revision: 29561	2011-12-17 18:49:55 +00:00
Gabor Juhos	67c7980290	ar71xx: connect GMAC0 to the internal switch on DB120 Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557	2011-12-15 22:25:38 +00:00
Gabor Juhos	5bbd416e38	ar71xx: add defines for the AR934X GMAC interface SVN-Revision: 29556	2011-12-15 22:25:36 +00:00
Gabor Juhos	e47a8c2bb2	ar71xx: fix GMAC1 interface speed on the DB120 board SVN-Revision: 29555	2011-12-15 22:25:35 +00:00
Gabor Juhos	36bc2c2c80	ar71xx: ag71xx: fix switch port setup for AR934X SVN-Revision: 29554	2011-12-15 22:25:32 +00:00
Gabor Juhos	00667c3846	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X SVN-Revision: 29553	2011-12-15 22:25:30 +00:00
Gabor Juhos	0540970345	ar71xx: ag71xx: setup switch interface mode on AR934X SVN-Revision: 29552	2011-12-15 22:25:29 +00:00
Gabor Juhos	44014110b8	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs SVN-Revision: 29551	2011-12-15 22:25:28 +00:00
Gabor Juhos	e2a546d475	ar71xx: allow to attach the internal switch for AR934x SVN-Revision: 29550	2011-12-15 22:25:22 +00:00
Gabor Juhos	9ae65588d8	ar71xx: introduce ar71xx_switch_data SVN-Revision: 29549	2011-12-15 22:25:11 +00:00
Gabor Juhos	bfe747b7d9	ar71xx: build images for TL-WR741N/ND v2 SVN-Revision: 29548	2011-12-15 22:03:48 +00:00
Gabor Juhos	aefff26624	ar71x: use raw squashfs images for TP-Link boards SVN-Revision: 29547	2011-12-15 22:03:46 +00:00
Gabor Juhos	d5bd28ffae	ar71xx: create a template for using unpadded squashfs images SVN-Revision: 29546	2011-12-15 22:03:45 +00:00
Gabor Juhos	dbc4fa4b5b	ar71xx: put squash image right after the kernel on TP-Link boards SVN-Revision: 29545	2011-12-15 22:03:44 +00:00
Gabor Juhos	850be54b72	ar71xx: tplinkpart: allow to detect JFFS2 as well SVN-Revision: 29543	2011-12-15 22:03:40 +00:00
Gabor Juhos	b7d7481b07	ar71xx: ag71xx: check PHY IDs before accessing the switch registers SVN-Revision: 29541	2011-12-15 13:25:23 +00:00
Gabor Juhos	0655552860	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x SVN-Revision: 29540	2011-12-15 13:25:21 +00:00
Gabor Juhos	204fc6bed5	ar71xx: ag71xx: nuke ar7240sw_init SVN-Revision: 29539	2011-12-15 13:25:20 +00:00
Gabor Juhos	d1f7783612	ar71xx: fix mac addresses on jjPlus devices SVN-Revision: 29538	2011-12-15 13:25:18 +00:00
Gabor Juhos	d3058b8f8c	ar71xx: build image for the Hornet-UB board SVN-Revision: 29536	2011-12-14 20:54:11 +00:00
Gabor Juhos	b9c5cb5c9a	ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535	2011-12-14 20:54:10 +00:00
Gabor Juhos	66c8cc0f6d	ar71xx: add GPIO function bit defines for AR933X SVN-Revision: 29534	2011-12-14 20:54:07 +00:00
Gabor Juhos	0c38d36488	ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533	2011-12-14 20:51:26 +00:00
Felix Fietkau	7076d74b21	ar71xx: fix gpio count for ar7241/ar7242 SVN-Revision: 29532	2011-12-14 20:47:24 +00:00
Felix Fietkau	b878f4a927	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h SVN-Revision: 29531	2011-12-14 20:21:42 +00:00
Felix Fietkau	e3017bc05e	ath9k: add support for registering extra leds connected to the wmac gpio lines SVN-Revision: 29530	2011-12-14 20:21:36 +00:00
Gabor Juhos	d2717d3d47	ar71xx: get rid of squashfs-4k images SVN-Revision: 29522	2011-12-13 20:41:24 +00:00
Gabor Juhos	5afedc67e2	generic: disable 'small sector' erase in m25p80 driver This fixes the issues with the jffs2 images on various boards. Using JFFS2 on devices with 4KiB erase sectors is not safe: http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html SVN-Revision: 29521	2011-12-13 20:41:22 +00:00
Felix Fietkau	4a441570ca	kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets SVN-Revision: 29516	2011-12-13 15:14:59 +00:00
Felix Fietkau	3806671fe5	ar71xx: fix wireless led on wzr-hp-g450h SVN-Revision: 29515	2011-12-13 15:00:43 +00:00
Gabor Juhos	2dd7dfb1c9	ar71xx: enable AR9341 support at setup.c Patch-by: dyq <729650915@qq.com> SVN-Revision: 29514	2011-12-13 14:59:43 +00:00
Gabor Juhos	058998acdb	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513	2011-12-13 14:59:40 +00:00
Felix Fietkau	48f9717371	ar71xx: add gpios and usb for wzr-hp-g450h SVN-Revision: 29509	2011-12-13 13:33:44 +00:00
Gabor Juhos	4ca2d86493	ar71xx: use RedBoot parser on PB44 SVN-Revision: 29501	2011-12-11 15:52:47 +00:00
John Crispin	934eef78ca	convert to gpiolib Signed-off-by: karlp@tweak.net.au SVN-Revision: 29486	2011-12-09 07:52:10 +00:00
Gabor Juhos	6e69765559	ar71xx: fix WNDR3x00 factory image generation Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs for the device: field in their DNI tags, not WNDR3700. This regressed in r29434, which redid WNDR3x00 model detection. The sixth parameter to Image/Build/Netgear is only used as the -B argument to mkdniimg, which is used to set the device: field. In r29434, this was erroneously changed to be WNDR3700 for all models. The tools to flash factory images (U-Boot's TFTP server and the factory software's upgrade utility) may refuse to honor images with incorrect device: fields in their DNI tags. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29473	2011-12-07 06:55:50 +00:00
Gabor Juhos	8eb8a6e1e7	ar71xx: fix WNDR3x00 model detection Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29472	2011-12-07 06:55:39 +00:00
Gabor Juhos	43bd4c6ad1	ramips: fix mac addresses on the DIR-300/600 boards SVN-Revision: 29471	2011-12-06 20:06:08 +00:00
Jonas Gorski	e33bb9ec66	linux: update 3.1 to 3.1.4 SVN-Revision: 29470	2011-12-06 19:50:30 +00:00
Jonas Gorski	6e2ae90f4a	linux: update 3.0 to 3.0.12 SVN-Revision: 29469	2011-12-06 19:50:25 +00:00
Gabor Juhos	c6b2b98812	ar71xx: create firmware image for the TL-WR740N/ND v4 boards Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com> SVN-Revision: 29468	2011-12-06 16:26:44 +00:00
Gabor Juhos	fbfad4e9b4	ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw SVN-Revision: 29467	2011-12-06 16:26:43 +00:00
Gabor Juhos	d753e08c79	ar71xx: fix TL-MR3x20 profile names in image/Makefile SVN-Revision: 29463	2011-12-06 13:53:21 +00:00
Gabor Juhos	62d8009cdd	ar71xx: cleanup TP-Link profiles SVN-Revision: 29461	2011-12-06 10:29:25 +00:00
Gabor Juhos	f7a482d382	ar71xx: add TP-Link board detection SVN-Revision: 29459	2011-12-05 21:11:01 +00:00
Gabor Juhos	bdc2eca7de	ar71xx: use correct mac on the lan interface on several TP-LINK devices SVN-Revision: 29458	2011-12-05 21:10:58 +00:00
Gabor Juhos	0103069372	ar71xx: allow to pass negative offset values for ar71xx_init_mac SVN-Revision: 29457	2011-12-05 21:10:55 +00:00
Gabor Juhos	ada92aee62	ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set SVN-Revision: 29456	2011-12-05 18:21:15 +00:00
Gabor Juhos	c6bcf8d1d8	ar71xx: verify hardware id of firmware images on TP-Link boards SVN-Revision: 29455	2011-12-05 18:11:51 +00:00
Gabor Juhos	5ef6ec4a31	ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454	2011-12-05 17:27:07 +00:00
Gabor Juhos	750d560767	ramips: set preinit interface mac on the hw550-3g board Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453	2011-12-05 17:27:06 +00:00
Gabor Juhos	b5d7b359b2	ramips: use ramips_get_mac_* functions in the preinit script SVN-Revision: 29452	2011-12-05 17:27:04 +00:00
Gabor Juhos	4d5b940e66	ramips: move ramips_get_mac_* functions to lib/ramips.sh SVN-Revision: 29451	2011-12-05 17:27:03 +00:00
Gabor Juhos	cc853acb3a	ramips: add ramips_ prefix to get_mac_{binary,nvram} functions SVN-Revision: 29450	2011-12-05 17:27:02 +00:00
Gabor Juhos	b1137d48a4	ramips: fix network configuration setup SVN-Revision: 29448	2011-12-05 16:54:48 +00:00
Gabor Juhos	4dc9092f4b	ar71xx: reclaim some unused space on TP-Link boards With the default OpenWrt configuration, this increases the size of the rootfs_data partition by 384KB/128KB on the older/newer TP-Link models. SVN-Revision: 29447	2011-12-05 14:52:36 +00:00
Gabor Juhos	3e7a6d182a	ar71xx: check squashfs signature in TP-Link mtd parser SVN-Revision: 29446	2011-12-05 14:52:33 +00:00
Gabor Juhos	feebf484ba	ar71xx: use the lzma-loader on TP-Link boards w/o lzma support SVN-Revision: 29444	2011-12-05 14:52:28 +00:00
Gabor Juhos	d42968351f	ar71xx: add lzma loader SVN-Revision: 29443	2011-12-05 14:52:25 +00:00
Felix Fietkau	1f809532de	ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441	2011-12-05 14:20:51 +00:00
Felix Fietkau	d1f63f8538	ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well SVN-Revision: 29440	2011-12-05 14:20:44 +00:00
Gabor Juhos	4cc2b9bb06	ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434	2011-12-05 13:03:54 +00:00
Jo-Philipp Wich	78699c2e51	add some missing wndr3800 base-files definitions SVN-Revision: 29433	2011-12-05 12:56:21 +00:00
Gabor Juhos	5177814ade	ar71xx: change user-space board detection SVN-Revision: 29432	2011-12-05 12:56:20 +00:00
Gabor Juhos	8a3a60fc64	ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big SVN-Revision: 29431	2011-12-05 12:47:53 +00:00
Gabor Juhos	56c9b50006	ramips: fix argus board rootfs size Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29422	2011-12-04 15:24:57 +00:00
Gabor Juhos	7cfa39f032	ar71xx: use the tp-link parser on the tp-link boards Also remove static partition maps. SVN-Revision: 29416	2011-12-03 18:13:31 +00:00
Gabor Juhos	514b1167c9	ar71xx: add mtd partition parser for the TP-Link boards SVN-Revision: 29415	2011-12-03 18:13:27 +00:00
Gabor Juhos	fc7fb29bae	ar71xx: run the RedBoot parser only on the RedBoot based boards SVN-Revision: 29414	2011-12-03 18:13:25 +00:00
Gabor Juhos	9cc28d5aa0	ar71xx: run the MyLoader parser only on the WP543 board SVN-Revision: 29413	2011-12-03 18:13:23 +00:00
Gabor Juhos	67a0b9aada	ar71xx: run the wrt160nl parser only on the WRT160NL board Also remove static mtd partition definitions. SVN-Revision: 29412	2011-12-03 18:13:20 +00:00
Gabor Juhos	c8acd6e013	ar71xx: allow to pass part_probe types to the m25p80 driver SVN-Revision: 29411	2011-12-03 18:13:18 +00:00
Gabor Juhos	20483faed0	ar71xx: create initramfs images for the newer TP-Link boards SVN-Revision: 29410	2011-12-03 16:57:23 +00:00
Gabor Juhos	9a2005e5e6	ar71xx: remove swconfig and wpad-mini from custom profiles SVN-Revision: 29408	2011-12-03 16:33:41 +00:00
Gabor Juhos	bc1d818610	ar71xx: add uboot-envtools to the default package list SVN-Revision: 29407	2011-12-03 16:33:40 +00:00
Gabor Juhos	a02a9c3f8b	ar71xx: reclaim unused space in WNDR3700/3800 images Patch by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29406	2011-12-03 16:33:38 +00:00
Gabor Juhos	ac82296c53	ar71xx: add a profile and build image for the OM2P board [juhosg: the name of the final image has been changed to 'openwrt-ar71xx-generic-om2p-squashfs-factory.bin'] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29397	2011-12-01 22:49:05 +00:00
Gabor Juhos	f188f1bad5	ar71xx: add support for Ubiquiti AirRouter Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395	2011-12-01 22:49:02 +00:00
Gabor Juhos	0612667c34	ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394	2011-12-01 22:48:59 +00:00
Gabor Juhos	3fccc3b376	ramips: enable sysupgrade on the RT-N15 board SVN-Revision: 29393	2011-12-01 22:48:58 +00:00
Gabor Juhos	4b2d1c3ad3	ramips: wrap long line in platform upgrade script SVN-Revision: 29392	2011-12-01 22:48:57 +00:00
Gabor Juhos	d622263588	ramips: add profile for the Asus RT-N15 This uses previously submitted rtl8366 kernel packages. [juhosg: The kmod-gpio-dev package has been removed from the package list.] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29391	2011-12-01 22:48:55 +00:00
Gabor Juhos	3a9e02fa41	ramips: setup default network configuration for RT-N15 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390	2011-12-01 22:48:54 +00:00
Gabor Juhos	fc61c107f0	ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile It is needed by the RT-N15 board. SVN-Revision: 29389	2011-12-01 22:48:53 +00:00
Gabor Juhos	80221fcd2a	ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387	2011-12-01 22:48:51 +00:00
Gabor Juhos	4f6c58adac	ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386	2011-12-01 22:48:48 +00:00
Gabor Juhos	39348e387f	ar71xx: use /lib/functions/uci-defaults.sh SVN-Revision: 29385	2011-12-01 22:48:47 +00:00
Gabor Juhos	569d8de6d6	ramips: simplify uci-defaults/network script SVN-Revision: 29383	2011-12-01 22:48:45 +00:00
Gabor Juhos	66c9a351dd	ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382	2011-12-01 22:48:43 +00:00
Gabor Juhos	62d18e9f9a	ramips: fix Asus RT-N15 board support Fix Asus RT-N15 flash partitions and make an image. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29381	2011-12-01 22:48:42 +00:00
Gabor Juhos	2dd79d55c7	ramips: Sparklan wcr-150gn board fixes * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380	2011-12-01 22:48:41 +00:00
Gabor Juhos	7c678e7511	ramips: fix package name of kmod-input-gpio-buttons Based on a patch from Omnima Limited. SVN-Revision: 29379	2011-12-01 22:48:39 +00:00
Gabor Juhos	2ed38b24a8	ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29378	2011-12-01 22:48:38 +00:00
Gabor Juhos	295e04084c	ramips: setup bc2 mac addresses from the generic network script SVN-Revision: 29377	2011-12-01 22:48:37 +00:00
Gabor Juhos	02f95d4fb3	ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376	2011-12-01 22:48:35 +00:00
John Crispin	88cb7ae104	omap24xx: bump to 3.1.3 SVN-Revision: 29349	2011-11-28 12:46:18 +00:00
John Crispin	bf7316424c	lantiq: bump to 3.1.3 SVN-Revision: 29348	2011-11-28 10:22:58 +00:00
Nicolas Thill	5e83009a52	targets: fix CONFIG_USB_STORAGE_* inconsistency * all options were switched from bool to tristate in 2.6.30 * add/change/move them to generic, disabled by default * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6 * cleanup ordering SVN-Revision: 29337	2011-11-25 20:47:44 +00:00
Gabor Juhos	f20797306a	ar71xx: modify phy mask of the WP543 board This fixes ethernet on newer boards. Based on a patch from #9702. SVN-Revision: 29328	2011-11-24 20:09:43 +00:00
Gabor Juhos	c20d7378e5	ar71xx: fix wndr3800 machine name This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326	2011-11-24 20:09:38 +00:00
Gabor Juhos	600b6efc41	ar71xx: copy atheros initramfs images to the image directory SVN-Revision: 29325	2011-11-24 20:09:35 +00:00
Gabor Juhos	d97cf76790	ar71xx: specify mtd layout in command line for the DB120 board SVN-Revision: 29324	2011-11-24 20:09:32 +00:00
John Crispin	9389593db9	lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch SVN-Revision: 29294	2011-11-23 12:22:15 +00:00
John Crispin	4982ca983c	lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com> SVN-Revision: 29292	2011-11-22 18:50:51 +00:00
Florian Fainelli	718907b661	don't package gpioctl by default SVN-Revision: 29288	2011-11-21 16:36:39 +00:00
Nicolas Thill	c33f21ae95	target/uml: export atomic64_* functions on 32-bit x86 SVN-Revision: 29287	2011-11-21 14:28:33 +00:00
Gabor Juhos	9990523a0f	ar71xx: set GE0 phy_mask for AR933x SVN-Revision: 29274	2011-11-20 11:30:10 +00:00
Jo-Philipp Wich	b5739aabd9	fix D-Link DSL-2650U image generation SVN-Revision: 29266	2011-11-19 21:34:51 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Florian Fainelli	ae90aa4efd	build images for D-Link DSL-2650U (#9003 ) SVN-Revision: 29238	2011-11-18 10:37:03 +00:00
Michael Büsch	0b86c2648a	omap24xx: Fix cbus nested IRQ acking SVN-Revision: 29237	2011-11-17 22:31:27 +00:00
Michael Büsch	df2810831c	omap24xx: Fix initialization of software IRQ mask SVN-Revision: 29236	2011-11-17 21:02:00 +00:00
Michael Büsch	3f92f7dd90	omap24xx: Update 3.1 config SVN-Revision: 29234	2011-11-17 19:35:57 +00:00
Michael Büsch	4793be2df9	omap24xx: Some retu/tahvo IRQ fixes SVN-Revision: 29233	2011-11-17 18:06:19 +00:00
Michael Büsch	630bafc5dd	omap24xx: Add basic kexec fixes. SVN-Revision: 29232	2011-11-17 14:57:34 +00:00
Michael Büsch	06c986984e	omap24xx: Add workaround for omapfb locking bug. SVN-Revision: 29201	2011-11-16 22:34:38 +00:00
Michael Büsch	0f03e17bd0	Revert r29193 SVN-Revision: 29195	2011-11-16 19:03:23 +00:00
Michael Büsch	93f02b1ba0	omap24xx: Set platform specific optimization flags SVN-Revision: 29194	2011-11-16 19:02:12 +00:00
Michael Büsch	b058e97af4	n810: Add xmodmap to profile SVN-Revision: 29193	2011-11-16 19:01:19 +00:00
Florian Fainelli	8d66465b08	include bridge and 8021q modules by default SVN-Revision: 29164	2011-11-15 22:24:22 +00:00
John Crispin	bbe96f13a6	lantiq: add runtime generation of /etc/config/network SVN-Revision: 29161	2011-11-15 18:21:00 +00:00
John Crispin	79a4642b40	lantiq: fix falcon build breakage dev-wifi-rt2x00 fails to build on falcon due to missing pci SVN-Revision: 29129	2011-11-14 18:55:58 +00:00
Gabor Juhos	f27548448b	ar71xx: fix USB LED on the DB120 board SVN-Revision: 29126	2011-11-14 17:43:15 +00:00
Gabor Juhos	6ebbb1329d	ar71xx: add a function for selecting output signal on a given GPIO pin SVN-Revision: 29125	2011-11-14 17:43:14 +00:00
Gabor Juhos	0c1d3617d7	ar71xx: fix GPIO function handling on AR934x SVN-Revision: 29124	2011-11-14 17:43:13 +00:00
Gabor Juhos	aa0c8c4885	ar71xx: add AR71XX_ prefix to GPIO_REG_* defines SVN-Revision: 29123	2011-11-14 17:43:11 +00:00
Gabor Juhos	62a7795afd	ar71xx: merge nand scan patch SVN-Revision: 29122	2011-11-14 17:43:10 +00:00
Gabor Juhos	12dae96097	ar71xx: fix a compiler warning SVN-Revision: 29110	2011-11-14 13:07:47 +00:00
Gabor Juhos	5ae0fd802c	ar71xx: fix GPIO count for AR934x SVN-Revision: 29109	2011-11-14 13:07:45 +00:00
Gabor Juhos	e52269364a	ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X SVN-Revision: 29108	2011-11-14 11:49:53 +00:00
Gabor Juhos	3104d70552	ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling SVN-Revision: 29107	2011-11-14 11:49:51 +00:00
Gabor Juhos	42e8ae09b5	ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines SVN-Revision: 29106	2011-11-14 11:49:49 +00:00
Gabor Juhos	c15caea360	ar71xx: add an irq parameter for ar724x_pcibios_init SVN-Revision: 29105	2011-11-14 11:49:47 +00:00
Gabor Juhos	cf90b24bb9	ar71xx: remove hardwired interface parameters from mach-* files SVN-Revision: 29103	2011-11-14 07:38:09 +00:00
Gabor Juhos	defc79cb40	ar71xx: force hardwired interface parameters in ar71xx_add_device_eth SVN-Revision: 29102	2011-11-14 07:38:07 +00:00
Gabor Juhos	6f4bc1ce37	ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth SVN-Revision: 29101	2011-11-14 07:38:05 +00:00
Florian Fainelli	7f787707de	build images for Pirelli A226M (#10409 ) SVN-Revision: 29045	2011-11-13 19:19:22 +00:00
Florian Fainelli	5dc2098448	register uart0 on DWV-S0 boards (#10409 ) SVN-Revision: 29044	2011-11-13 19:19:18 +00:00
Florian Fainelli	56a96ba876	refresh 3.0 patches SVN-Revision: 29043	2011-11-13 19:19:14 +00:00
Florian Fainelli	54da5cf11f	refresh 2.6.39 patches SVN-Revision: 29042	2011-11-13 19:19:10 +00:00
Florian Fainelli	717a4391d7	rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch SVN-Revision: 29041	2011-11-13 19:19:05 +00:00
Florian Fainelli	c093c9df34	fix typo, load ip17xx switch module SVN-Revision: 29039	2011-11-13 18:41:26 +00:00
Gabor Juhos	368bbc510b	ar71xx: enable has_gbit flag on AR724{0,1} SVN-Revision: 29026	2011-11-13 17:36:36 +00:00
Gabor Juhos	15d7016c9f	ar71xx: fixup onboard PCIe chip registration on the DB120 board SVN-Revision: 29022	2011-11-13 12:48:03 +00:00
Gabor Juhos	f623066e60	ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed SVN-Revision: 29021	2011-11-13 12:48:01 +00:00
Gabor Juhos	d2316b2a45	ar71xx: ag71xx: add support for getting switch port link status SVN-Revision: 29017	2011-11-13 11:27:04 +00:00
Gabor Juhos	d0db89133c	ar71xx: remove mii_ctrl resources of the ethernet devices SVN-Revision: 29016	2011-11-13 11:27:03 +00:00
Gabor Juhos	34015ed6e8	ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx SVN-Revision: 29015	2011-11-13 11:27:01 +00:00
Gabor Juhos	2d882cff23	ar71xx: ag71xx: remove unused mii_cfg related functions and defines SVN-Revision: 29014	2011-11-13 11:27:00 +00:00
Gabor Juhos	538a9493b9	ar71xx: set MII interface speed from the set_speed callbacks SVN-Revision: 29013	2011-11-13 11:26:59 +00:00
Gabor Juhos	93cd46be13	ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data Also rename the corresponding callback functions. SVN-Revision: 29012	2011-11-13 11:26:57 +00:00
Gabor Juhos	9579bb4267	ar71xx: ag71xx: remove MII interface setup code SVN-Revision: 29011	2011-11-13 11:26:56 +00:00
Gabor Juhos	da64ce8603	ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode SVN-Revision: 29010	2011-11-13 11:26:54 +00:00
Gabor Juhos	0112153a0e	ar71xx: fix occasional kernel hangs during boot on AR934x The patch taken from the linux-mips mailing list. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. SVN-Revision: 29009	2011-11-13 11:26:52 +00:00
Gabor Juhos	1afc76ea13	ar71xx: refresh kernel patches SVN-Revision: 29008	2011-11-13 11:26:51 +00:00
Jonas Gorski	d8acb75009	linux: update 3.1 to 3.1.1 SVN-Revision: 29007	2011-11-13 10:48:05 +00:00
John Crispin	a8797d0de6	lantiq: add uci-defaults code for handling leds SVN-Revision: 29004	2011-11-12 23:40:21 +00:00
John Crispin	832e02cd77	lantiq: add /lib/lantiq.sh and make hotplug handlers use it SVN-Revision: 29003	2011-11-12 23:40:16 +00:00
John Crispin	5dcbbf0160	lantiq: rename leds SVN-Revision: 29002	2011-11-12 23:40:12 +00:00
John Crispin	d84b7596d9	lantiq: split compat headers out of bsp header patch SVN-Revision: 29001	2011-11-12 23:40:07 +00:00
John Crispin	2cff80f015	lantiq: adds hotplug handler for loading rt2x00 firmware SVN-Revision: 29000	2011-11-12 23:40:01 +00:00
John Crispin	3660c51c40	lantiq: adds hotplug handler for handling buttons and makes w303v work with it SVN-Revision: 28999	2011-11-12 23:39:56 +00:00
John Crispin	4248705108	lantiq: cleanup default package selection SVN-Revision: 28998	2011-11-12 23:39:51 +00:00
John Crispin	eb20ab87e6	lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it SVN-Revision: 28994	2011-11-12 18:41:15 +00:00
Gabor Juhos	bbfaaeffd6	kernel: ar8216: add support for the AR8236 switch SVN-Revision: 28993	2011-11-12 14:09:52 +00:00
Gabor Juhos	ecb3690d0a	kernel: ar8216: move port vlan setup into a separate function SVN-Revision: 28992	2011-11-12 14:09:50 +00:00
Gabor Juhos	5ad763075e	ar71xx: use the button for WPS control on the DB120 SVN-Revision: 28990	2011-11-12 12:50:20 +00:00
Gabor Juhos	4555be2bec	ar71xx: register the second ethernet interface on the DB120 board SVN-Revision: 28989	2011-11-12 12:50:19 +00:00
Gabor Juhos	368c6605a0	ar71xx: implement SoC specific phy interface setup SVN-Revision: 28988	2011-11-12 12:50:18 +00:00
Gabor Juhos	21d317b9cc	ar71xx: move phy interface setup into a separate function SVN-Revision: 28987	2011-11-12 12:50:16 +00:00
Gabor Juhos	aff0c84ffa	ar71xx: register both MDIO bus on the DB120 board SVN-Revision: 28986	2011-11-12 12:09:59 +00:00
Gabor Juhos	b144249108	ar71xx: add AR934X specific MDIO registration code SVN-Revision: 28985	2011-11-12 12:09:56 +00:00
Gabor Juhos	f835106c8c	ar71xx: add a secondary mdio bus SVN-Revision: 28984	2011-11-12 12:09:54 +00:00
Gabor Juhos	90a42da270	ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* SVN-Revision: 28983	2011-11-12 12:09:50 +00:00
Gabor Juhos	9daa2149fd	ar71xx: add an id argument to ar71xx_add_device_mdio SVN-Revision: 28982	2011-11-12 12:09:48 +00:00
Gabor Juhos	b07b687aec	ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa SVN-Revision: 28981	2011-11-12 12:09:42 +00:00
Gabor Juhos	a9216bb76e	ar71xx: add AR934x specific USB setup SVN-Revision: 28980	2011-11-12 10:54:20 +00:00
Gabor Juhos	346e44105a	ar71xx: register the first ethernet interface on the DB120 board SVN-Revision: 28979	2011-11-12 10:54:18 +00:00
Gabor Juhos	b1ba5e2f3d	ar71xx: allow to register ethernet interfaces for AR934X SVN-Revision: 28978	2011-11-12 10:54:17 +00:00
Gabor Juhos	2f9e535e89	ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered SVN-Revision: 28977	2011-11-12 10:54:16 +00:00
Gabor Juhos	e962b07c8b	ar71xx: add AR934X specific bootstrap and reset register bits SVN-Revision: 28976	2011-11-12 10:54:15 +00:00
Gabor Juhos	d461fdd519	ar71xx: add diag support for the DB120 board SVN-Revision: 28975	2011-11-12 10:54:10 +00:00
Gabor Juhos	d8db8e94c8	ar71xx: fix GPIO direction setup for AR934x SVN-Revision: 28974	2011-11-12 10:54:09 +00:00
Gabor Juhos	43e993e5f5	ar71xx: fix AR934X clock frequency calculation SVN-Revision: 28973	2011-11-12 10:54:08 +00:00
Gabor Juhos	8687fc3e41	ar71xx: generate ubootenv from uci-defaults instead of providing defconfig I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971	2011-11-12 10:54:04 +00:00
John Crispin	fda4ee22a0	lantiq: improve falcon package selection SVN-Revision: 28962	2011-11-11 21:59:11 +00:00
John Crispin	e1dc73be90	lantiq: fix breakage introduced in 3.1 bump SVN-Revision: 28961	2011-11-11 21:59:01 +00:00
Jo-Philipp Wich	be49daffc8	base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli SVN-Revision: 28933	2011-11-10 12:16:41 +00:00
Jonas Gorski	f53128f79b	target: linux: mtd: fix MTDREFRESH to an arbitrary high number To make the ioctl number "stable", use an arbitrary high number to prevent conflicts with new mtd ioctls that would push MTDREFRESH's number. Also make mtd use the in-kernel mtd headers. SVN-Revision: 28893	2011-11-09 21:16:36 +00:00
Felix Fietkau	7a2efd8c28	ar71xx: remove dead code SVN-Revision: 28851	2011-11-08 00:33:20 +00:00
Felix Fietkau	94309039b7	ar71xx: on ar7240, exclude ports from their own port vlan destination mask SVN-Revision: 28850	2011-11-08 00:33:15 +00:00
Felix Fietkau	b06efd636a	kernel: add a top level menuconfig option for enabling lockdep SVN-Revision: 28848	2011-11-08 00:32:57 +00:00
Gabor Juhos	87704b8078	ar71xx: create TL-WA901ND network config from uci-defaults SVN-Revision: 28833	2011-11-07 21:44:24 +00:00
Gabor Juhos	09fdfa444f	ar71xx: create ALL0258N network config from uci-defaults SVN-Revision: 28832	2011-11-07 21:44:23 +00:00
Gabor Juhos	63348f5fed	ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults SVN-Revision: 28831	2011-11-07 21:44:20 +00:00
Gabor Juhos	c3692c8331	ar71xx: create WZR-HP-G300NH network config from uci-defaults SVN-Revision: 28830	2011-11-07 21:44:17 +00:00
Gabor Juhos	ee1a07a11d	ar71xx: create RB-493G network config from uci-defaults SVN-Revision: 28829	2011-11-07 21:44:12 +00:00
Gabor Juhos	d82d063d81	ar71xx: create TL-WR1043ND network config from uci-defaults SVN-Revision: 28828	2011-11-07 21:44:11 +00:00
Gabor Juhos	68be590894	ar71xx: create WRT160NL network config from uci-defaults SVN-Revision: 28827	2011-11-07 21:44:09 +00:00
Gabor Juhos	83901e47c9	ar71xx: create PB92 network config from uci-defaults SVN-Revision: 28826	2011-11-07 21:44:08 +00:00
Gabor Juhos	22ab9fc9ad	ar71xx: create DIR-825-B1 network config from uci-defaults SVN-Revision: 28825	2011-11-07 21:44:07 +00:00
Gabor Juhos	e866ba5753	ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults SVN-Revision: 28824	2011-11-07 21:44:03 +00:00
Gabor Juhos	9298c7afe5	ar71xx: create RB-450 network config from uci-defaults SVN-Revision: 28823	2011-11-07 21:44:02 +00:00
Gabor Juhos	ac256f97bd	ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults SVN-Revision: 28822	2011-11-07 21:44:01 +00:00
Gabor Juhos	944ac3f6cf	ar71xx: create RB-433{,U} network config from uci defaults SVN-Revision: 28821	2011-11-07 21:43:58 +00:00
Gabor Juhos	6e8390ae6c	ar71xx: create even more network configs from the uci-defaults script Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. SVN-Revision: 28820	2011-11-07 21:43:56 +00:00
Gabor Juhos	b62560413a	ar71xx: create more network configs from the uci-defaults script Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. SVN-Revision: 28819	2011-11-07 21:43:54 +00:00
Gabor Juhos	6c92b26bac	ar71xx: create a bunch of network configs from the uci-defaults script Create the default network configuration dynamically for the boards with a single ethernet interface. SVN-Revision: 28818	2011-11-07 21:43:52 +00:00
Gabor Juhos	0a8e5dbf7b	ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817	2011-11-07 21:43:51 +00:00
Gabor Juhos	54c034ae7a	ar71xx: remove AP81 defconfig, it is the same as the generic config SVN-Revision: 28816	2011-11-07 21:34:33 +00:00
Gabor Juhos	5b6cc3eb9f	ar71xx: change generated Buffalo firmware versions With version 1.76 the upgrade may fail with newer Buffalo firmwares with a message like this: "You can not update the firmware because the firmware version is earlier than 1.82. Please use 1.82 or later version for firmware update." SVN-Revision: 28815	2011-11-07 21:34:32 +00:00
Imre Kaloz	cc2cf8f3d5	update 3.1 patches SVN-Revision: 28814	2011-11-07 21:13:13 +00:00
Imre Kaloz	c4bc2552a3	update arm mach-types SVN-Revision: 28813	2011-11-07 21:12:26 +00:00
Gabor Juhos	eb9ef60e2d	ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards SVN-Revision: 28812	2011-11-07 20:25:00 +00:00
Gabor Juhos	8456840d82	ar71xx: wrap long lines in the upgrade script SVN-Revision: 28811	2011-11-07 20:24:59 +00:00
Gabor Juhos	c60baf78ce	ar71xx: fix WHR-HP-G300N firmware partition offset SVN-Revision: 28810	2011-11-07 20:24:57 +00:00
Gabor Juhos	b27254a2c5	ar71xx: add default network configuration for the WHR-HP-GN SVN-Revision: 28807	2011-11-07 13:32:43 +00:00
Gabor Juhos	034b2b7cde	ar71xx: build image for the Buffalo WHR-HP-GN SVN-Revision: 28806	2011-11-07 12:59:11 +00:00
Gabor Juhos	a801d620a7	ar71xx: add support for the Buffalo WHR-HP-GN board SVN-Revision: 28805	2011-11-07 12:59:10 +00:00
Gabor Juhos	0d9ae0a036	ar71xx: build image for the Buffalo WHR-G301N SVN-Revision: 28804	2011-11-07 12:59:08 +00:00
Gabor Juhos	4509af17ed	ar71xx: add support for the Buffalo WHR-G301N board SVN-Revision: 28803	2011-11-07 12:59:07 +00:00
Gabor Juhos	63784ea2bc	ar71xx: fix WHR-HP-G300N image generation SVN-Revision: 28802	2011-11-07 12:59:05 +00:00
Gabor Juhos	b3b21cb3bf	ar71xx: enable WHR-HP-G300N support in kernel config SVN-Revision: 28801	2011-11-07 12:59:04 +00:00
Gabor Juhos	4aace1e2e3	ar71xx: fix WHR-HP-G300N MTD partitions SVN-Revision: 28800	2011-11-07 12:59:03 +00:00
Michael Büsch	05ce57c005	omap24xx: Add cbus tahvo locking fix. SVN-Revision: 28767	2011-11-05 16:10:18 +00:00
Michael Büsch	6288ac7ed4	omap24xx: Fix n810bm compilation SVN-Revision: 28766	2011-11-05 16:01:53 +00:00
Gabor Juhos	297ac9a7f1	kernel: swconfig: add a missing unlock in error path SVN-Revision: 28753	2011-11-04 14:38:31 +00:00
Jo-Philipp Wich	d6f02b62d4	add timeserver config to target specific system configs as well SVN-Revision: 28750	2011-11-04 12:53:35 +00:00
Felix Fietkau	82bd0a43f1	kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) SVN-Revision: 28734	2011-11-03 20:02:31 +00:00
John Crispin	95d36d3efe	lantiq: remove obseleted folder. we use 3.1 now SVN-Revision: 28728	2011-11-03 16:33:27 +00:00
John Crispin	ea36ad76bc	lantiq: bump to 3.1 SVN-Revision: 28721	2011-11-03 15:15:52 +00:00
Gabor Juhos	4c985724af	ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 SVN-Revision: 28709	2011-11-01 14:38:12 +00:00
Gabor Juhos	fc8adbb854	ar71xx: build image for the TL-WR741ND v4 board SVN-Revision: 28708	2011-11-01 11:20:55 +00:00
Gabor Juhos	91f08d47c2	ar71xx: add initial support for the TL-WR741ND v4 board The ethernet port LEDs are not working yet. SVN-Revision: 28706	2011-11-01 11:20:52 +00:00
Gabor Juhos	21e651c9a1	ar71xx: add AR933X GMAC register defines SVN-Revision: 28705	2011-11-01 11:20:50 +00:00
Gabor Juhos	43e2e2e4ef	ar71xx: combine LEDs setup in one file SVN-Revision: 28704	2011-11-01 11:20:49 +00:00
Gabor Juhos	f372620ffa	ar71xx: unify LED names on Planex boards SVN-Revision: 28703	2011-11-01 11:20:47 +00:00
Gabor Juhos	66ab406d5a	ar71xx: unify LED names on Buffalo boards SVN-Revision: 28702	2011-11-01 11:20:46 +00:00
Gabor Juhos	e7586959df	ar71xx: unify LED names on TP-Link boards SVN-Revision: 28701	2011-11-01 11:20:44 +00:00
Gabor Juhos	3a7b12a27d	ar71xx/all0258n: sysupgrade support U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be stored in the U-Boot environment. If the checksums don't match during boot, a failsafe-system is booted instead. This patch adds a board-specific sysupgrade hack for the all0258n which calculates and updates the checksums for the U-Boot environment. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28700	2011-11-01 09:23:32 +00:00
Gabor Juhos	f40557a692	ar71xx/all0258n: add default config This adds default network and uboot-env settings for the ALL0258N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28699	2011-11-01 09:23:31 +00:00
Gabor Juhos	06d9653b36	ar71xx: remove default network config of the mzk-w04nu board as well It works with the generic config. SVN-Revision: 28695	2011-11-01 09:23:25 +00:00
Gabor Juhos	693c777eaf	ar71xx: remove LED setup of nonexistent interfaces on RB750 SVN-Revision: 28693	2011-10-31 14:26:56 +00:00
Gabor Juhos	2bcd612e72	ar71xx: remove default network config of the wnr2000 board It is the same as the generic configuration. SVN-Revision: 28692	2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis	17ccd4aec4	rt305x: Create factory image for Fonera 2.0n SVN-Revision: 28689	2011-10-31 09:23:44 +00:00
Michael Büsch	29958120a2	omap24xx: Default to linux-3.1 SVN-Revision: 28687	2011-10-30 22:42:00 +00:00
Michael Büsch	c00fd42353	omap24xx: Fix n810 LCD initialization SVN-Revision: 28685	2011-10-30 20:31:45 +00:00
Michael Büsch	f37c24d35f	omap24xx: Fix n810 boot SVN-Revision: 28683	2011-10-30 18:46:45 +00:00
Gabor Juhos	39b3bfcf6a	ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28678	2011-10-30 13:06:30 +00:00
Michael Büsch	fd0e6e1452	omap24xx: Refresh 3.1 config SVN-Revision: 28677	2011-10-29 22:52:44 +00:00
Michael Büsch	ba9ee13744	omap24xx: Refresh 3.1 patches SVN-Revision: 28676	2011-10-29 22:52:07 +00:00
Michael Büsch	e184bfe6f0	Fix tusb patch SVN-Revision: 28675	2011-10-29 22:33:59 +00:00
Michael Büsch	a3db2f2055	omap24xx: Fix MUSB compile SVN-Revision: 28674	2011-10-29 22:26:27 +00:00
Michael Büsch	5dde93038f	omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko. SVN-Revision: 28673	2011-10-29 20:35:36 +00:00
Michael Büsch	7d123a86e3	omap24xx: Add 3.1 patchset. SVN-Revision: 28672	2011-10-29 19:02:50 +00:00
Gabor Juhos	415814f051	ar71xx: fix typos in image/Makefile SVN-Revision: 28618	2011-10-27 07:54:52 +00:00
Gabor Juhos	1646346798	ar71xx: add initial support for the OpenMesh OM2P board Based on a patch by Marek Lindner <marek@open-mesh.com> SVN-Revision: 28617	2011-10-27 07:54:51 +00:00
Gabor Juhos	d02f22fea1	ar71xx/all0258n: fix partition layout A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28615	2011-10-27 07:54:47 +00:00
Michael Büsch	f15f6bc76f	Update my email address SVN-Revision: 28603	2011-10-26 14:54:26 +00:00
Felix Fietkau	b17bfe4f68	x86: disable crashlog, ioremap of RAM does not work properly here SVN-Revision: 28599	2011-10-26 11:49:25 +00:00
Gabor Juhos	4a70cace09	ar71xx: create image for the WNDR3800 This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 28597	2011-10-26 06:12:47 +00:00
Jo-Philipp Wich	3d1d93cb0c	target: remove CONFIG_IDE_PROC_FS support as well SVN-Revision: 28586	2011-10-25 16:40:06 +00:00
Jo-Philipp Wich	de7cae82e9	brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit SVN-Revision: 28585	2011-10-25 16:19:52 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Gabor Juhos	ee8077f0fe	ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571	2011-10-24 21:49:36 +00:00
Gabor Juhos	18452a753b	ramips: fix switch-port assignment for HW550-3G WAN is on swtich port 0 for Aztech HW550-3G. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28570	2011-10-24 21:49:32 +00:00
Gabor Juhos	68a01c0180	ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569	2011-10-24 21:49:31 +00:00
Gabor Juhos	c8b9086ac5	ar71xx: build image for the Buffalo WHR-HP-G300N Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28568	2011-10-24 21:49:29 +00:00
Gabor Juhos	9d51cda2db	ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567	2011-10-24 21:49:26 +00:00
Gabor Juhos	0ab6be2ba3	ar71xx: build image for the Allnet ALL0258N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28565	2011-10-24 21:49:23 +00:00
Gabor Juhos	d96e321bd1	ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564	2011-10-24 21:49:21 +00:00
Gabor Juhos	ef41e0a61c	ar71xx: don't override CONFIG_FSNOTIFY SVN-Revision: 28563	2011-10-24 21:49:18 +00:00
Jo-Philipp Wich	b61de9c865	base-files: make sure inittab-console-fixup returns with success (#10275 ) SVN-Revision: 28562	2011-10-24 21:35:43 +00:00
Nicolas Thill	b0d9bccafc	x86: allow VDI & VMDK images for all subtargets (closes: #10255 ) SVN-Revision: 28518	2011-10-22 13:09:15 +00:00
Jonas Gorski	40d088446f	linux: generic: refresh patches for 3.1-rc10 Hopefully the last one and identical to final. SVN-Revision: 28492	2011-10-20 10:32:44 +00:00
Jonas Gorski	a136b67604	linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423	2011-10-11 23:05:16 +00:00
Jonas Gorski	03f91068d1	ar71xx: add a workaround for ar8316 not always driving the TA bit to low AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. SVN-Revision: 28422	2011-10-11 23:05:13 +00:00
Jonas Gorski	b7a2a74823	ar8216: use mdiobus_{read,write} to ensure proper locking SVN-Revision: 28421	2011-10-11 23:05:10 +00:00
John Crispin	0a866293bd	* update patches to 3.0 * add basic vr9 support * backport 3.1 fixes * backport 3.2 queue (falcon) SVN-Revision: 28405	2011-10-10 15:13:46 +00:00
Jonas Gorski	c674c874b7	ag71xx: close a race between the phy state machine and link state A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380	2011-10-08 11:37:14 +00:00
Jo-Philipp Wich	ce5e1abbb7	add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver SVN-Revision: 28376	2011-10-06 18:23:16 +00:00
Florian Fainelli	829ae01f16	add missing kernel config symbols SVN-Revision: 28363	2011-10-04 09:15:37 +00:00
Daniel Dickinson	b0345ef184	Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17 SVN-Revision: 28357	2011-10-03 04:39:54 +00:00
Daniel Dickinson	c0a625ffbf	Add patch for linux-3.0 as well. Fix typo from previous submission with input-keys-polled. Philip Prindeville - 2011-10-03 01:44:55 SVN-Revision: 28356	2011-10-03 03:09:20 +00:00
Daniel Dickinson	7e372b6dcf	New x86 platform specific symbol needed for 3.1-rc3.	2011-10-03 03:06:29 +00:00
Daniel Dickinson	541aa8e38e	A lot of these options get set automatically when Geode is selected. Don't make the config more complicated than it needs to be. Philip Prindeville - 2011-08-29 03:15:27 SVN-Revision: 28353	2011-10-03 03:02:42 +00:00
Florian Fainelli	3802769ea1	add vlan definitions for Siemens SE505v2 Hi, this patch adds the correct vlan definitions for the Siemens SE505v2. It applies to trunk as well as backfire (please apply here too). On backfire this also patches brcm-2,4, because brcm47xx base-files is just symlinked to brcm-2.4. It also fixes two whitespace issues. Tested with brcm47xx on both trunk and backfire branch and works as expected. Signed-off-by: Manuel Munz <freifunk@somakoma.de> SVN-Revision: 28336	2011-09-30 12:55:33 +00:00
John Crispin	aecc73de77	The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. SVN-Revision: 28310	2011-09-26 10:35:51 +00:00
John Crispin	1ef8066bff	* remove obseleted m25p80 patch SVN-Revision: 28309	2011-09-26 09:36:02 +00:00
John Crispin	cf59e7255d	* rebase 3.0 patches * fold some fixes into existing patches SVN-Revision: 28308	2011-09-26 09:35:02 +00:00
Gabor Juhos	6ac4156136	ar71xx: fix MAC addresses on the DIR-825-B1 board Patch-by: Lukas Kuna SVN-Revision: 28295	2011-09-23 19:56:39 +00:00
Gabor Juhos	e45d7d7006	ar71xx: enable login only on the system console by default SVN-Revision: 28294	2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis	5fc14dfb87	linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) SVN-Revision: 28293	2011-09-23 10:00:13 +00:00
Gabor Juhos	49ac36e818	ar71xx: build images for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28279	2011-09-21 11:47:56 +00:00
Gabor Juhos	733399600f	ar71xx: add support for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28277	2011-09-21 11:47:53 +00:00
Gabor Juhos	d3617ac7d3	ar71xx: add AR933x specific USB setup function SVN-Revision: 28276	2011-09-21 11:47:51 +00:00
Gabor Juhos	91340d8af7	ar71xx: add ar71xx_device_reset_rmw helper SVN-Revision: 28275	2011-09-21 11:47:50 +00:00
Gabor Juhos	9fa51d5c38	ar71xx: fix copy&paste bug in WZRHPAG300H profile description SVN-Revision: 28274	2011-09-21 11:47:48 +00:00
Gabor Juhos	079e746fc4	ar71xx: remove 'default [yn]' from machine Kconfig entries SVN-Revision: 28273	2011-09-21 11:47:47 +00:00
Gabor Juhos	73dac07c44	ar71xx: sort AR71XX_MACH_* entries SVN-Revision: 28272	2011-09-21 11:47:45 +00:00
Gabor Juhos	ef2431c8d9	ar71xx: create image for the TP-Link TL-WR743ND v1 Same hardware as WR741ND but with PoE support. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 28271	2011-09-21 11:47:44 +00:00
Gabor Juhos	76d0d1a837	ar71xx: create image for the TP-Link TL-WR740N v3 Signed-off-by: Martin Raykov <martin.raykov@gmail.com> SVN-Revision: 28269	2011-09-21 11:47:40 +00:00
Gabor Juhos	93c093057d	generic: jumbo frames support for rtl8366s This patch adds the option to enable jumbo frames on the rtl8366s switch. This is almost exactly the same as the first patch at https://dev.openwrt.org/ticket/7977 and it has been requested in a comment there. I have tested this and it successfully allows devices on the switch using jumbo frames to communicate. Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk> SVN-Revision: 28267	2011-09-21 11:47:38 +00:00
Jo-Philipp Wich	34f2cfc657	fix generation for arm platforms Based on patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 28225	2011-09-13 07:39:14 +00:00
Felix Fietkau	1bdf65f580	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) SVN-Revision: 28213	2011-09-11 17:44:12 +00:00
Jo-Philipp Wich	1e24383ae6	Various enhancements from Manuel Munz <freifunk@somakoma.de> - don't regenerate Package index unless the packagedir changes - remove opkg lists from rootfs, saves > 1MB uncompressed - don't direct errors on index creation into packagelist SVN-Revision: 28205	2011-09-09 17:25:20 +00:00
Jo-Philipp Wich	ba46c7b3c6	Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz SVN-Revision: 28197	2011-09-08 22:18:26 +00:00
Felix Fietkau	65d809ef19	ar71xx: do not count normal interrupts as spurious (fixes #10037 ) SVN-Revision: 28182	2011-09-06 05:38:23 +00:00
Felix Fietkau	de8cabe839	ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954 ) SVN-Revision: 28173	2011-09-05 18:37:48 +00:00
Imre Kaloz	ed2c8bdc92	upgrade testing kernel support to 3.1 SVN-Revision: 28165	2011-09-04 15:06:05 +00:00
Imre Kaloz	4f0b1a6602	cleanup config SVN-Revision: 28164	2011-09-04 15:02:37 +00:00
Imre Kaloz	0569cff6e1	refresh patches SVN-Revision: 28163	2011-09-04 15:01:56 +00:00
Imre Kaloz	6d17e13cde	add missing symbols SVN-Revision: 28162	2011-09-04 15:01:25 +00:00
Felix Fietkau	24dfe525c2	brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default SVN-Revision: 28125	2011-08-29 21:23:51 +00:00
Felix Fietkau	cd2c68501c	ar71xx: fix ethernet PLL setting on ar7242 SVN-Revision: 28124	2011-08-29 21:23:46 +00:00
Hamish Guthrie	cc037a5e27	Remove subpage align patch SVN-Revision: 28086	2011-08-25 11:49:55 +00:00
Hamish Guthrie	21f7943561	Re-order patches, add nand sub-page alignment SVN-Revision: 28084	2011-08-25 10:37:30 +00:00
Florian Fainelli	cbd28ad0ec	bump to 2.6.39.4 Since linux gets developed on x86 more than all other hardware, hardly makes sense to have our default x86 version be trailing by over a year. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28082	2011-08-25 09:35:51 +00:00
Florian Fainelli	d2652dee9d	update alix2 platform driver Add support for Ed Wildgoose's alix platform driver plus my enhancement to add GPIO soft button support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28081	2011-08-25 09:35:45 +00:00
Jonas Gorski	71adaae258	kernel: add two missing config symbols for 3.1 SVN-Revision: 28080	2011-08-24 11:43:25 +00:00
Gabor Juhos	72e117ec79	ramips: rt305x: add support for the ZyXEL NBG-419N board SVN-Revision: 28078	2011-08-22 20:41:49 +00:00
Gabor Juhos	4b96d3af2a	ramips: rt305x: remove unused defines from mach-nw718.c SVN-Revision: 28077	2011-08-22 20:41:48 +00:00
Gabor Juhos	462ca22e9c	ramips: sort Makefile entries SVN-Revision: 28076	2011-08-22 20:41:47 +00:00
Gabor Juhos	d50494f3bb	ramips: sort RAMIPS_MACH_* defines SVN-Revision: 28075	2011-08-22 20:41:45 +00:00
Gabor Juhos	90686691ce	ramips: fix wireless firmware extraction for wr512-3gn Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28073	2011-08-22 18:08:45 +00:00
Gabor Juhos	f0049824b9	ramips: remove 'default [yn]' keywords from machine Kconfig entries SVN-Revision: 28054	2011-08-19 15:55:12 +00:00
Gabor Juhos	6720025497	ramips: rt305x: fix wr512n image generation SVN-Revision: 28053	2011-08-19 15:55:11 +00:00
Gabor Juhos	9085b05d9e	ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052	2011-08-19 15:55:10 +00:00
Gabor Juhos	46b101ad0a	ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28051	2011-08-19 15:55:08 +00:00
Gabor Juhos	05209860da	ramips: fix wireless on Belkin F5D8235 v2 Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28050	2011-08-19 15:55:07 +00:00
Gabor Juhos	f8ab604eb6	ramips: fix typo in default packages Fix fivebytepypo - there is no such kernel module wpad-mini :) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28049	2011-08-19 15:55:05 +00:00
Hamish Guthrie	048d4aca76	omap35xx: Add 3.0.3 kernel support for Gumstix SVN-Revision: 28047	2011-08-19 12:00:08 +00:00
Hauke Mehrtens	464539b074	kernel: update to version 3.0.3 SVN-Revision: 28043	2011-08-18 12:54:12 +00:00
Jo-Philipp Wich	ebb152295b	fix the default network configuration for the ASUS WL-330gE (#8751 ) SVN-Revision: 28024	2011-08-17 03:16:59 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Jonas Gorski	3e94ee9642	kernel: generic: refresh patches for 3.1-rc2 SVN-Revision: 28021	2011-08-16 21:42:15 +00:00
Gabor Juhos	ace8ce0845	ramips: use maccalc instead of hexdump + sed SVN-Revision: 28007	2011-08-15 19:00:23 +00:00
Gabor Juhos	bfc47ffead	ramips: rt305x: fix mac addresses on the Netcore NW718 board SVN-Revision: 28006	2011-08-15 18:55:53 +00:00
Gabor Juhos	17c041cd0b	ramips: add maccalc to the default package list SVN-Revision: 28005	2011-08-15 18:55:52 +00:00
Gabor Juhos	67e480971c	ramips: add input drivers to the default package list SVN-Revision: 28003	2011-08-15 18:55:50 +00:00
Gabor Juhos	35ecf12059	ramips: rt305x: make config and factory partitions read-only on the ATP-52B SVN-Revision: 28002	2011-08-15 18:55:48 +00:00
Gabor Juhos	75e2360ab3	ramips: add uci-defaults scripts to preconfigure USB LEDs SVN-Revision: 28000	2011-08-15 14:12:00 +00:00
Gabor Juhos	e1b176de82	ramips: rt305x: add some USB modules to the default profile SVN-Revision: 27999	2011-08-15 14:11:58 +00:00
Gabor Juhos	169d68c98c	ramips: rt305x: add dwc_otg driver Based on a patch by Layne Edwards <ledwards@astrumtech.net> SVN-Revision: 27997	2011-08-15 14:11:55 +00:00
Gabor Juhos	0ca16a4600	ramips: rt305x: register the dwc_otg device on the relevant boards SVN-Revision: 27996	2011-08-15 14:11:52 +00:00
Gabor Juhos	addc86fdbd	ramips: rt305x: add dwc_otg platform device Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 27995	2011-08-15 14:11:51 +00:00
Gabor Juhos	6ef87ff5e6	ramips: sync kernel config SVN-Revision: 27993	2011-08-15 14:11:48 +00:00
Gabor Juhos	4ee4fc9725	ramips: load the input drivers during preinit SVN-Revision: 27992	2011-08-15 14:11:47 +00:00
Gabor Juhos	a3c7e71ae1	ramips: add support for Argus ATP-52B [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991	2011-08-15 14:11:45 +00:00
Gabor Juhos	1ebcf03789	ramips: allow to specify port layout for the switch of the RT305x/RT3350 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 27990	2011-08-15 14:11:43 +00:00
Gabor Juhos	bb64fb2e58	generic: ar8216: add support for get link status SVN-Revision: 27989	2011-08-15 14:11:41 +00:00
Felix Fietkau	50817f6afe	kernel: disable cfi cmdset 0002 erase suspend on some platforms, erase suspend leads to data corruption and lockups when write ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh. rather than play whack-a-mole with a hard to reproduce issue on a variety of devices, simply disable erase suspend, as it will usually not produce any useful gain on the small filesystems used on embedded hardware. SVN-Revision: 27984	2011-08-15 00:15:36 +00:00
Felix Fietkau	12c84f8eeb	ar71xx: add some code to detect DMA stuck conditions on ar7240 SVN-Revision: 27975	2011-08-13 22:30:14 +00:00
Felix Fietkau	85ccc74e1b	ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues SVN-Revision: 27973	2011-08-13 21:49:46 +00:00
Hauke Mehrtens	77218b0338	brcm47xx: fix flash detection on chipcommon less devices. This closes #9906 Thank you for the report Kim SVN-Revision: 27967	2011-08-12 16:37:22 +00:00
Felix Fietkau	82a05d1a19	initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it SVN-Revision: 27960	2011-08-11 20:32:57 +00:00
Felix Fietkau	d26bb6c59c	ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922 ) SVN-Revision: 27959	2011-08-11 13:52:40 +00:00
Florian Fainelli	ce2ced7311	package more board specific modules: - keyboard matrix driver - SoC sound support based on patch by KanjiMonster SVN-Revision: 27957	2011-08-11 11:18:44 +00:00
Florian Fainelli	f7dbf2ef04	add more missing touchscren symbols (3.0+) SVN-Revision: 27956	2011-08-11 11:18:41 +00:00
Florian Fainelli	11b1f687d4	disable hardware perf support to work in qemu SVN-Revision: 27955	2011-08-11 11:18:37 +00:00
Hauke Mehrtens	20de21593b	kernel: revert r27953 KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30 SVN-Revision: 27954	2011-08-11 09:54:02 +00:00
Hauke Mehrtens	409f8211e1	kernel: fix ocf patch for kernel 2.6.30 find_task_by_vpid is already exported by the kernel without any patches needed. SVN-Revision: 27953	2011-08-11 09:47:36 +00:00
Jonas Gorski	7304dcad2a	kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF find_task_by_vpid is already exported, thus breaking builds. SVN-Revision: 27952	2011-08-11 09:46:30 +00:00
Jonas Gorski	def60e2918	ar71xx: make ehci patch apply again SVN-Revision: 27951	2011-08-10 23:02:56 +00:00
Felix Fietkau	9e5ead9a51	ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918 ) SVN-Revision: 27950	2011-08-10 22:24:56 +00:00
Florian Fainelli	b59ab7d13b	fix ehci build on 3.0+ SVN-Revision: 27946	2011-08-10 11:37:25 +00:00
Florian Fainelli	0e40c19b45	add ignore_oc in struct ehci_hcd SVN-Revision: 27945	2011-08-10 11:37:21 +00:00
Florian Fainelli	458716389c	update to 3.0.1 SVN-Revision: 27943	2011-08-09 13:13:22 +00:00
Florian Fainelli	f124358722	add CONFIG_EARLY_PRINTK SVN-Revision: 27942	2011-08-09 13:13:16 +00:00
Jonas Gorski	6b5f483efa	bcm63xx: add support for linux 3.1-rc1 SVN-Revision: 27941	2011-08-09 12:19:49 +00:00
Jonas Gorski	cf2070bd5b	linux: generic: add support for 3.1-rc1 SVN-Revision: 27940	2011-08-09 12:19:43 +00:00
Daniel Dickinson	7ef004a144	Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>" SVN-Revision: 27929	2011-08-08 02:33:18 +00:00
Felix Fietkau	ba9e7889dd	kernel: fix another typo in the netfilter optimization patches SVN-Revision: 27927	2011-08-07 21:17:18 +00:00
Hauke Mehrtens	6f4151b7f0	kernel: add missing option SVN-Revision: 27925	2011-08-06 16:46:04 +00:00
Felix Fietkau	ac96ae6731	kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks SVN-Revision: 27923	2011-08-06 12:39:31 +00:00
Hauke Mehrtens	a1d5ad7655	uml: add some missing options SVN-Revision: 27921	2011-08-06 11:23:45 +00:00
Hauke Mehrtens	d447cb5164	kernel: add some missing config options These options where found by buildbot SVN-Revision: 27920	2011-08-06 10:41:15 +00:00
Hauke Mehrtens	51be984655	kernel: update to kernel version 3.0.1 SVN-Revision: 27918	2011-08-06 09:51:55 +00:00
Florian Fainelli	55e020cd14	update to kernel 3.0 SVN-Revision: 27912	2011-08-05 13:48:42 +00:00
Florian Fainelli	698c1b4952	add more missing config symbols SVN-Revision: 27911	2011-08-05 13:48:38 +00:00
Florian Fainelli	48af2495b4	update to kernel 3.0 SVN-Revision: 27910	2011-08-05 13:48:35 +00:00
Florian Fainelli	a8e79cbdf8	add 101-perf_arm_uclibc.patch to 3.0 patches SVN-Revision: 27909	2011-08-05 13:48:31 +00:00
Florian Fainelli	c99d08f050	add missing config symbol SVN-Revision: 27908	2011-08-05 13:48:28 +00:00
Gabor Juhos	7e5a1bc1d0	ar71xx: fix image generation SVN-Revision: 27907	2011-08-05 10:31:52 +00:00
Hauke Mehrtens	77966b81d8	brcm47xx: use kernel 3.0 As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported. SVN-Revision: 27906	2011-08-04 20:10:24 +00:00
Hauke Mehrtens	8428ebd8e8	brcm47xx: update patches * this adds sflash support for ssb devices * the flash is now a platform device * minor updates SVN-Revision: 27902	2011-08-04 20:04:54 +00:00
Gabor Juhos	85b858fae6	ar71xx: enable sysupgrade on the AP96 and DB120 boards SVN-Revision: 27901	2011-08-04 19:41:18 +00:00
Gabor Juhos	fb77134596	ar71xx: use the same test for AP121 and Zcomax sysupgrade images SVN-Revision: 27900	2011-08-04 19:41:17 +00:00
Gabor Juhos	fd3a5f64f2	ar71xx: cleanup image generation Makefile SVN-Revision: 27899	2011-08-04 19:41:16 +00:00
Felix Fietkau	4b75394056	ar71xx: fix ethernet FIFO state corruption on ar7240 When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 SVN-Revision: 27896	2011-08-04 17:36:31 +00:00
Felix Fietkau	d2aeca6b6d	ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done SVN-Revision: 27895	2011-08-04 17:36:27 +00:00
Felix Fietkau	500c3a1475	ar71xx: fix MAC/MDIO reset mask handling SVN-Revision: 27894	2011-08-04 17:36:23 +00:00
Jonas Gorski	3b36e83a29	generic: Add missing config symbol SVN-Revision: 27887	2011-08-03 23:28:00 +00:00
Florian Fainelli	4543f6d659	remove 8*1-usb_serial_endpoint_size.patch This is breaking some devices out there such as Winchiphead CH341 adapters (#9601) SVN-Revision: 27885	2011-08-03 13:23:21 +00:00
Florian Fainelli	c37a9544bf	add support for BCM6345 Ethernet DMA engine SVN-Revision: 27881	2011-08-02 18:55:55 +00:00
Florian Fainelli	11c4128770	improve BCM6345 support - runtime detect the amount of memory available - define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks - fix GPIO control SVN-Revision: 27880	2011-08-02 18:55:46 +00:00
Florian Fainelli	c4af036ec7	refresh 3.0 patches SVN-Revision: 27879	2011-08-02 18:55:38 +00:00
Felix Fietkau	54d97e6782	ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% SVN-Revision: 27878	2011-08-02 15:12:08 +00:00
Florian Fainelli	a0ce3668a6	fix r6040 multicast patch, thanks nicolas le falher SVN-Revision: 27876	2011-08-02 14:13:00 +00:00
Jonas Gorski	ed2b7cd342	linux/generic: remove obsolete kernel options from 3.0 Also fix one typo. SVN-Revision: 27875	2011-08-02 09:58:16 +00:00
Jonas Gorski	61e2e03311	kernel: Fix firewire for 2.6.37+ The old ieee1394 stack was removed in 2.6.37. The new firewire stack is available for all kernel versions, but experimental for the older one, so make both available where appropriate. SVN-Revision: 27874	2011-08-02 09:53:19 +00:00
Felix Fietkau	e5e17a1ce8	imagebuilder: clean opkg files if requested (patch from #9866 ) SVN-Revision: 27872	2011-08-01 23:58:11 +00:00
Felix Fietkau	62b8cba9c0	kernel: enable inotify by default (#8055 ) SVN-Revision: 27853	2011-07-31 18:12:23 +00:00
Felix Fietkau	19eaf1c5f7	kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 SVN-Revision: 27840	2011-07-30 15:39:52 +00:00
Imre Kaloz	e4b6839fd3	upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...) SVN-Revision: 27826	2011-07-29 10:16:48 +00:00
Jonas Gorski	e18ceb1dac	ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814	2011-07-28 11:57:51 +00:00
Gabor Juhos	ea211c4d90	ramips: rt305x: add support for the Netcore NW718 board SVN-Revision: 27813	2011-07-28 10:56:32 +00:00
Gabor Juhos	437e184484	ramips: rt305x: add support for the Asus RT-G32 B1 board Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812	2011-07-28 10:56:30 +00:00
Gabor Juhos	7193f29d96	ramips: rt305x: enable M25P80 driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27811	2011-07-28 10:56:28 +00:00
Gabor Juhos	c6db514de8	ramips: rt305x: introduce rt305x_register_spi helper Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27810	2011-07-28 10:56:27 +00:00
Gabor Juhos	57122e7ccc	ramips: add SPI controller driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27809	2011-07-28 10:56:25 +00:00
Gabor Juhos	3f986df05f	ramips: rt305x: add support for the DIR-600 B1,B2 boards SVN-Revision: 27808	2011-07-28 10:56:24 +00:00
Gabor Juhos	857c1028ac	ramips: rt305x: change machine id for DIR-300 SVN-Revision: 27807	2011-07-28 10:56:22 +00:00
Gabor Juhos	42d3a55347	ramips: rt305x: rename LEDs on the DIR-300-B1 SVN-Revision: 27806	2011-07-28 10:56:21 +00:00
Gabor Juhos	39689b648f	ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805	2011-07-28 10:56:19 +00:00
Gabor Juhos	32c0534516	ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> SVN-Revision: 27804	2011-07-28 10:56:18 +00:00
Gabor Juhos	57663ce25b	ramips: fix PWH2004 image generation SVN-Revision: 27803	2011-07-28 10:56:15 +00:00
Jonas Gorski	eaa935658b	swconfig: Add generic switch identifiers Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. SVN-Revision: 27800	2011-07-27 18:00:18 +00:00
Felix Fietkau	4da138d899	x86/alix2: include WAN interface by default Include WAN interface by default, instead of putting both ports in the LAN bridge. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27787	2011-07-26 16:37:48 +00:00
Felix Fietkau	41db64f8e0	x86/alix2: fix typo in target makefile Cut and paste cruft from borrowing from Geos platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27786	2011-07-26 16:37:44 +00:00
Hauke Mehrtens	80956276a7	x86: add missing config symbols This adds some config symbols for kernel 3.0. Thank you realopty for the patch. This is from #9719. SVN-Revision: 27775	2011-07-25 21:21:01 +00:00
Jonas Gorski	4e6c93bef1	bcm63xx: Fix SPI commands and register offsets for BCM6348 In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that. It also fixes some spi commands for all bcm63xx. Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk> SVN-Revision: 27774	2011-07-25 19:52:47 +00:00
Imre Kaloz	f0f10fa599	add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch SVN-Revision: 27762	2011-07-24 22:04:08 +00:00
Jo-Philipp Wich	f66871e836	From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua> SVN-Revision: 27760	2011-07-24 15:37:00 +00:00
Jo-Philipp Wich	6eb9e39bc4	refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final SVN-Revision: 27759	2011-07-24 15:36:33 +00:00
Hauke Mehrtens	4815eaa4c3	brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but this causes a data bus error (oops) on a SoC. SVN-Revision: 27758	2011-07-24 15:18:29 +00:00
Felix Fietkau	9e4113b493	ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh SVN-Revision: 27756	2011-07-24 14:40:35 +00:00
Felix Fietkau	5b32d62fcf	rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB SVN-Revision: 27755	2011-07-24 14:40:31 +00:00
Felix Fietkau	1afe8a0726	rtl8366: unify rtl8366s and rtl8366rb platform data SVN-Revision: 27754	2011-07-24 14:40:23 +00:00
Hauke Mehrtens	00dd85d8f6	ocf-linux: version bump to 20110720 Fixes problem with TFM allocation in cryptosoft.c Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Hauke: * remove ubsec_ssb package and take it from ocf-linux * use patches from ocf-linux package * refresh all patches * readd some build fixes for OpenWrt. * readd CRYPTO_MANAGER dependency SVN-Revision: 27753	2011-07-24 14:17:58 +00:00
Felix Fietkau	b5e3f6cd81	x86: 2.6.39 requires additional symbol Sysfs support for DMI BIOS was added in 2.6.39. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27749	2011-07-24 09:41:07 +00:00
Felix Fietkau	a6f7e72cf7	atheros: fix mii phy read/write ioctl Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 27747	2011-07-24 09:11:10 +00:00
Felix Fietkau	6d3bddb056	geos: include pppstats and pppdump in default packaging As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27743	2011-07-24 08:41:58 +00:00
Felix Fietkau	9105dad418	ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684 ) SVN-Revision: 27739	2011-07-24 08:02:20 +00:00
Imre Kaloz	193845ce7a	upgrade to 3.0 SVN-Revision: 27738	2011-07-23 20:44:08 +00:00
Imre Kaloz	5e29e14795	upgrade to 3.0 SVN-Revision: 27737	2011-07-23 20:43:53 +00:00
Imre Kaloz	0cb1b5d775	3.0 is out SVN-Revision: 27736	2011-07-23 20:42:58 +00:00
Hauke Mehrtens	49f4d4217e	brcm47xx: build bcma into the kernel Now we can assume that every brcm47xx kernel has the bcma module build into the kernel. This is not needed for this version as this does not support bcma as system bus but kernel 3.0 will. SVN-Revision: 27733	2011-07-23 11:19:58 +00:00
Hauke Mehrtens	5169b72c8a	kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing SVN-Revision: 27731	2011-07-23 11:17:00 +00:00
Hauke Mehrtens	b07b5fc7b6	brcm47xx: remove old kernel versions SVN-Revision: 27724	2011-07-22 18:41:24 +00:00
Hauke Mehrtens	b988168906	brcm47xx: update bcma and ssb to master-2011-07-21 * add new patches for bcm4716 SoC * add support for serial flash on bcma bus SVN-Revision: 27723	2011-07-22 16:30:42 +00:00
Hauke Mehrtens	39f491e479	kernel: update to linux-3.0 and refresh patches. Thank you Peter Wagner for the patch SVN-Revision: 27722	2011-07-22 16:04:25 +00:00
Felix Fietkau	c7173a211d	ar71xx: reinitialize global switch settings after reset on ar7240 SVN-Revision: 27705	2011-07-20 14:39:47 +00:00
Felix Fietkau	ca473833c4	ar71xx: configure address aging on ar7240 SVN-Revision: 27704	2011-07-20 14:39:42 +00:00
Felix Fietkau	fefc79f3cb	ar71xx: reset the phy in the ethernet init on ar724x SVN-Revision: 27703	2011-07-20 12:04:34 +00:00
Felix Fietkau	005fe5d1fd	ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset SVN-Revision: 27702	2011-07-20 12:04:29 +00:00
Felix Fietkau	e7ab000008	ar71xx: increase the delay after the ethernet MAC reset SVN-Revision: 27701	2011-07-20 12:04:25 +00:00
Felix Fietkau	255dcaa3a6	ar71xx: fix an unused variable warning SVN-Revision: 27700	2011-07-20 12:04:20 +00:00
John Crispin	8acc276692	sync default kernel config for lantiq danube/ar9 SVN-Revision: 27697	2011-07-19 18:08:09 +00:00

... 9 10 11 12 13 ...

8114 commits