Commit graph

21899 commits

Author SHA1 Message Date
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
SVN-Revision: 33343
2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation
SVN-Revision: 33342
2012-09-09 14:05:17 +00:00
Gabor Juhos
f3ecbea052 adm5120: move common routerboot definitions into a separate header file
Those will be used on the ar71xx platform as well.

SVN-Revision: 33341
2012-09-09 11:55:42 +00:00
Jonas Gorski
7708138183 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
Fixes booting the device with button hotplug enabled (#10785).

SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751
SVN-Revision: 33338
2012-09-08 17:51:56 +00:00
Gabor Juhos
73df240bb3 ar71xx: add library code for RLE decoding
It will be used for the MikroTik boards.

SVN-Revision: 33337
2012-09-08 17:51:54 +00:00
Gabor Juhos
f4be8a76de ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
SVN-Revision: 33335
2012-09-08 13:39:09 +00:00
Gabor Juhos
70d00ac64e ar71xx: refresh kernel patches
SVN-Revision: 33334
2012-09-08 13:39:04 +00:00
Felix Fietkau
958cb133ae mac80211: bump PKG_RELEASE
SVN-Revision: 33333
2012-09-08 13:19:21 +00:00
Felix Fietkau
c9eea9dea9 ath9k: disable PA predistortion by default, since it has been reported to reduce rx sensitivity on some devices (#12135)
SVN-Revision: 33332
2012-09-08 13:18:58 +00:00
Felix Fietkau
6f6af5bee7 mac80211: update to 2012-09-07, adds ath9k beacon fixes, mesh/adhoc fixes, and more
SVN-Revision: 33331
2012-09-08 11:10:54 +00:00
Florian Fainelli
6771d63284 use the recommended ARM I/O accessors
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

SVN-Revision: 33330
2012-09-08 09:51:05 +00:00
Florian Fainelli
95f1b6d415 gcc: add upstream fixes for GCC bug 54494
See: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54494 for more infos.

SVN-Revision: 33329
2012-09-07 10:31:58 +00:00
Florian Fainelli
11f1712b49 gcc: add upstream fixes for GCC bug 54369
See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54369 for more infos.

SVN-Revision: 33328
2012-09-07 10:31:54 +00:00
Daniel Dickinson
c3b7139ab2 dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
SVN-Revision: 33326
2012-09-06 18:15:26 +00:00
Felix Fietkau
31e063d212 netifd: update to latest version, fixes premature device release on link loss (fixes #12114, #12112, #11959)
SVN-Revision: 33325
2012-09-06 15:05:30 +00:00
Luka Perkov
4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
Florian Fainelli
3730e6c794 add some ohci workarounds to make ohci work
SVN-Revision: 33323
2012-09-05 20:19:29 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value.
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
2012-09-05 20:08:42 +00:00
John Crispin
f186bff0ef add missing kvm_guest kernel options
SVN-Revision: 33319
2012-09-05 19:38:42 +00:00
Gabor Juhos
069f544d2b ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
SVN-Revision: 33318
2012-09-05 19:26:50 +00:00
Gabor Juhos
81bb246a8d ar71xx: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33317
2012-09-05 19:22:51 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
2012-09-05 19:22:48 +00:00
Florian Fainelli
94a45be66b enable CFI command set 0002 FORCE_WORD_WRITE
SVN-Revision: 33315
2012-09-03 20:25:51 +00:00
Florian Fainelli
19cbe80501 pad squashfs image
SVN-Revision: 33314
2012-09-03 20:25:46 +00:00
Florian Fainelli
1964753c22 add Generic and dLAN USB Extender profiles
SVN-Revision: 33313
2012-09-03 20:25:40 +00:00
Florian Fainelli
e88e20d975 nuport-mac: disable MAC RX and TX during interface close
Fixes sporadic crashes while reconfiguring the network interface.

SVN-Revision: 33312
2012-09-03 10:26:01 +00:00
Felix Fietkau
088a126240 hostapd: fix ap+sta issues
SVN-Revision: 33311
2012-08-29 16:06:24 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.

SVN-Revision: 33310
2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
2012-08-29 10:37:54 +00:00
Gabor Juhos
02cb5f9dcd ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
SVN-Revision: 33308
2012-08-29 10:37:53 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
Gabor Juhos
b2d4ae6615 iwinfo: add hwinfo of AR9280 2T2R PCIe
SVN-Revision: 33306
2012-08-29 10:37:49 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
86ff39c2cb mac80211/rt2800: integrate cosmetic changes in rt3352 support
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33297
2012-08-29 10:37:33 +00:00
Gabor Juhos
326426b388 uboot-envtools: add configration for ramips devices
uboot-env settings for ALL0239-3G, ALL0256N, ALL5002.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33296
2012-08-29 10:37:32 +00:00
Gabor Juhos
0c5688cc38 ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
SVN-Revision: 33295
2012-08-29 10:37:30 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
Jo-Philipp Wich
803b98f7a3 iwinfo: add hwinfo for Rt3050 and maintain alphabetic order
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33293
2012-08-29 10:10:46 +00:00
John Crispin
8703cf92d0 revert threadsafe patch
SVN-Revision: 33292
2012-08-29 10:08:30 +00:00
Jo-Philipp Wich
95738d97a9 ppp: introduce "authfail" option which specifies whether pppd should attempt to re-authenticate after a failed PAP/CHAP auth
SVN-Revision: 33291
2012-08-29 10:07:08 +00:00