KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
9239 commits 1 branch 0 tags 154 MiB
Commit graph

60 commits

Author SHA1 Message Date
Imre Kaloz
722c78cd1e move some options to the generic 2.6.27 config 
SVN-Revision: 13264
 2008-11-17 17:28:12 +00:00
Imre Kaloz
7d09c0b086 update to 2.6.27.6 
SVN-Revision: 13261
 2008-11-17 17:22:30 +00:00
Florian Fainelli
0d4286b0b3 This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201) 
SVN-Revision: 13213
 2008-11-15 11:30:22 +00:00
Florian Fainelli
cb126cd576 Package bcm63xx-pcmcia kernel module and fix compilation 
SVN-Revision: 13212
 2008-11-15 11:26:23 +00:00
Florian Fainelli
9bbc37d26b Remove old kernel configuration files 
SVN-Revision: 13211
 2008-11-15 11:23:29 +00:00
Florian Fainelli
517e3d404c Delete old brcm63xx files 
SVN-Revision: 13210
 2008-11-15 11:21:42 +00:00
Gabor Juhos
88cda758c3 update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193 
SVN-Revision: 13192
 2008-11-12 17:49:01 +00:00
Nicolas Thill
0a11abc83d add missing kconfig symbols for 2.6.27 targets when all modules are enabled 
SVN-Revision: 13178
 2008-11-11 02:43:35 +00:00
Felix Fietkau
d0388bbe5c brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition 
SVN-Revision: 13130
 2008-11-06 12:52:39 +00:00
Florian Fainelli
7cedaafd0c Add basic support for Inventel Liveboxes, resync kernel config 
SVN-Revision: 13108
 2008-11-03 20:30:43 +00:00
Florian Fainelli
9aa1d64b91 Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken 
SVN-Revision: 13106
 2008-11-03 18:52:58 +00:00
Florian Fainelli
aa90a702db Use 2.6.27.4 kernel version 
SVN-Revision: 13055
 2008-10-28 11:19:24 +00:00
Florian Fainelli
30d2200e7d Update targets to 2.6.27.3 
SVN-Revision: 13035
 2008-10-23 09:11:10 +00:00
Florian Fainelli
28baca91fe Update patches and rename board 9 stands for development board 
SVN-Revision: 13024
 2008-10-22 09:20:51 +00:00
Florian Fainelli
691e187381 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices 
SVN-Revision: 13015
 2008-10-20 12:55:28 +00:00
Florian Fainelli
64c28032c8 New Broadcom BCM63xx codebase, huge thanks to Maxime ;) 
SVN-Revision: 13001
 2008-10-17 22:53:56 +00:00
Florian Fainelli
5718709711 Fix reference to the old and replaced kmod-rt61 
SVN-Revision: 12723
 2008-09-27 10:47:00 +00:00
Gabor Juhos
821170133f update to 2.6.26.5 and 2.6.25.17 
SVN-Revision: 12718
 2008-09-26 18:46:53 +00:00
Nicolas Thill
3029c2fd53 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported 
SVN-Revision: 12690
 2008-09-24 19:28:53 +00:00
Gabor Juhos
184c6b06f2 update to 2.6.26.3 and 2.6.25.16 
SVN-Revision: 12371
 2008-08-22 15:37:19 +00:00
Gabor Juhos
e5fa05d788 update to 2.6.25.15 and 2.6.26.2 
SVN-Revision: 12242
 2008-08-07 16:52:52 +00:00
Gabor Juhos
104b3386a2 update to 2.6.25.12 
SVN-Revision: 11933
 2008-07-26 10:53:23 +00:00
Imre Kaloz
492ba57b56 update targets to 2.6.25.10 
SVN-Revision: 11667
 2008-07-05 16:52:15 +00:00
Imre Kaloz
dee39d10ee upgrade to 2.6.25.9 
SVN-Revision: 11584
 2008-06-26 14:28:16 +00:00
Gabor Juhos
4af6ac74fb upgrade to 2.6.25.7, and refresh patches 
SVN-Revision: 11523
 2008-06-17 12:57:04 +00:00
Imre Kaloz
2eb6751084 upgrade to 2.6.25.6 
SVN-Revision: 11435
 2008-06-11 11:38:39 +00:00
Florian Fainelli
6e0427c8a4 Add bcm3350 cpuid 
SVN-Revision: 11364
 2008-06-05 16:19:46 +00:00
Gabor Juhos
c2619fb5ab revert kernel version to 2.6.25.4 
SVN-Revision: 11273
 2008-05-27 06:27:16 +00:00
Gabor Juhos
ac897ce5b1 refresh kernel patches 
SVN-Revision: 11201
 2008-05-19 08:33:22 +00:00
Gabor Juhos
f9719b35c8 upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19) 
SVN-Revision: 11184
 2008-05-18 20:12:54 +00:00
Felix Fietkau
12da51bb3c bcm96345: correct some 6345 specific stuff 
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11183
 2008-05-18 17:32:16 +00:00
Felix Fietkau
ab2b78aabd bcm963xx: fix cfe detection 
The CFE detection failed to account for zero termination.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11182
 2008-05-18 17:32:05 +00:00
Felix Fietkau
be49888f6c bcm963xx: add new timer code 
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11181
 2008-05-18 17:31:55 +00:00
Felix Fietkau
f92e4aaf53 bcm963xx: remove obsolete timer code 
This removes some code that has been deprecated in kernels >= 2.6.24.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11180
 2008-05-18 17:31:45 +00:00
Felix Fietkau
4db60563fc bcm963xx: fix uart isr 
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11179
 2008-05-18 17:31:35 +00:00
Felix Fietkau
ca851edf10 bcm963xx: rewrite irq handling code 
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11178
 2008-05-18 17:31:25 +00:00
Felix Fietkau
289c41604f bcm963xx: add missing trailing zero to load address 
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11177
 2008-05-18 17:31:11 +00:00
Felix Fietkau
17d20bb016 bcm963xx: flashmap support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11176
 2008-05-18 17:31:02 +00:00
Felix Fietkau
da18b98cff bcm963xx: serial port support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11175
 2008-05-18 17:30:49 +00:00
Felix Fietkau
97b85443eb bcm963xx: board support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11174
 2008-05-18 17:30:39 +00:00
Felix Fietkau
f94d5eafc9 bcm963xx: add 2.6.25 configuration file 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11173
 2008-05-18 17:30:30 +00:00
Felix Fietkau
8e7ff7a673 bcm963xx: use the 2.6.25.1 kernel 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11172
 2008-05-18 17:30:16 +00:00
Felix Fietkau
2dfabe3991 bcm963xx: image generation using image tagger 
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11171
 2008-05-18 17:30:04 +00:00
Felix Fietkau
46b4413fbb bcm963xx: fix load address / kernel entry 
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11169
 2008-05-18 17:29:39 +00:00
Nicolas Thill
e3a42b23c6 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate 
SVN-Revision: 11097
 2008-05-09 17:08:51 +00:00
Imre Kaloz
68943e35c2 upgrade to 2.6.24.5 
SVN-Revision: 10959
 2008-04-28 10:23:36 +00:00
Nicolas Thill
c6fe45ed55 properly disable CONFIG_CRYPTO_HW 
SVN-Revision: 10952
 2008-04-27 12:31:50 +00:00
Florian Fainelli
03f917f26c Delete config-default file and resync kernel configuration for brcm63xx 
SVN-Revision: 10790
 2008-04-11 14:22:41 +00:00
Florian Fainelli
62240465c4 brcm63xx image generation cleanups (#3169) 
SVN-Revision: 10703
 2008-04-01 21:10:47 +00:00
Florian Fainelli
ebf4eb11e9 Upgrade brcm63xx to 2.6.24 
SVN-Revision: 10455
 2008-02-13 17:31:17 +00:00