Commit graph

523 commits

Author SHA1 Message Date
John Crispin
58eccdac4f lantiq: fix vr9 ubi handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
2014-04-03 14:26:24 +00:00
John Crispin
e36568e74b lntiq: add support for Astoria ARV7519RW.
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
2014-03-30 10:02:30 +00:00
John Crispin
42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
2014-03-30 09:16:52 +00:00
John Crispin
5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin
8b0507c9ca lantiq: fix mtd_split for brnboot firmware images
The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324
2014-03-30 09:16:35 +00:00
John Crispin
0c73e85cd0 lantiq: fixup ath5k support
http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40323
2014-03-30 09:16:31 +00:00
John Crispin
112059073e lantiq: fix initial VLAN conf for P2601HNFX
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
2014-03-30 09:16:23 +00:00
John Crispin
5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
2014-03-30 09:16:19 +00:00
John Crispin
e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin
3a43738e21 lantiq: reset gphys on reboot
If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40318
2014-03-30 09:16:10 +00:00
John Crispin
9531390aad lantiq: add support for ZyXEL P2812HNUFX
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
2014-03-30 09:16:06 +00:00
John Crispin
9b78e13aa3 lantiq: add ubifs support in image Makefile
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40316
2014-03-30 09:16:02 +00:00
John Crispin
2803e79be6 lantiq: add ubifs to FEATURES
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40315
2014-03-30 09:15:58 +00:00
John Crispin
07eb49b7e0 lantiq: xrx200: add ubi support in the kernel
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
2014-03-30 09:15:54 +00:00
John Crispin
82da5ca248 lantiq: add inital support for xrx200 switch
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40313
2014-03-30 09:15:50 +00:00
John Crispin
32e2246270 lantiq: xrx200: fix duplex
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40312
2014-03-30 09:15:46 +00:00
John Crispin
93e5c8cefc lantiq: fixup 3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
2014-03-30 09:15:41 +00:00
John Crispin
561a7ef93b lantiq: fix nand/ebu locking
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40310
2014-03-30 09:15:37 +00:00
John Crispin
d6a138141c lantiq: add tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40309
2014-03-30 09:15:33 +00:00
John Crispin
defdec0f3a lantiq: drop old svip folders
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40294
2014-03-27 13:34:56 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov
6e0fd6d518 lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
2014-02-15 22:54:34 +00:00
Luka Perkov
eddc327c7c lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
2014-02-15 22:54:32 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
John Crispin
053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Luka Perkov
26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
John Crispin
f58b424c9e lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
2014-01-12 12:07:07 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
John Crispin
776c6c50ce lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38884
2013-11-20 17:53:36 +00:00
John Crispin
d823c20f05 lantiq: update default mii modes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
2013-11-20 16:56:58 +00:00
John Crispin
06ada4b10f lantiq: fix an endless loop in the vmmc platform code
this was caused by not honoured error return codes of of_gpio_count()

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38878
2013-11-20 16:56:32 +00:00
John Crispin
000cefd85e lantiq: DGN3500 fixups
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
2013-11-11 13:15:08 +00:00
John Crispin
5139b2d996 lantiq: rename TDW8970 led adsl->dsl
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38730
2013-11-11 12:19:26 +00:00
John Crispin
dabdc6911a lantiq: update TDW8970.dts to support buttons properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38728
2013-11-11 12:19:18 +00:00
John Crispin
30fafd0617 lantiq: remove old hotplug handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38727
2013-11-11 12:19:15 +00:00
John Crispin
7ee1546ca3 lantiq: fix TDW8970 lan/wan mac
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38677
2013-11-07 12:46:24 +00:00
John Crispin
f198adc030 lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devices
The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.

Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38673
2013-11-07 12:46:08 +00:00
John Crispin
1a368e8616 lantiq: fix td-w8970 initramfs generation
https://dev.openwrt.org/ticket/14417

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38667
2013-11-07 12:45:44 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens
81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
John Crispin
654dfb1784 lantiq: fix up diag.sh
init no longer exists as a parameter

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38342
2013-10-08 15:28:33 +00:00
John Crispin
715b62ebad lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
2013-10-07 15:03:00 +00:00
John Crispin
81fb43d2f1 lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
2013-10-07 15:02:56 +00:00
John Crispin
ae225124c6 lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
John Crispin
1398a5d849 lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
John Crispin
4f3797386f lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
2013-09-30 20:48:46 +00:00
Felix Fietkau
bff3637d24 lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38243
2013-09-27 21:12:08 +00:00
Gabor Juhos
9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Gabor Juhos
0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos
482b5f34e5 lantiq/3.10: unbreak the mtd-split patch
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
Luka Perkov
7665c57a72 lantiq: fix usb on sx76x
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38083
2013-09-20 14:24:30 +00:00
Luka Perkov
d2ad87885d lantiq: style fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38051
2013-09-19 00:50:49 +00:00
Luka Perkov
43f1a47430 lantiq: add initial support for Siemens GIGASX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
2013-09-19 00:50:48 +00:00
Luka Perkov
3b33adeb99 lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
Luka Perkov
7d2c5682b9 lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
John Crispin
40ac8dd9df lantiq: fix FRITZ7320 flash window size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38042
2013-09-18 16:31:45 +00:00
John Crispin
f9f73ef2ec lantiq: fix ath9k eeprom loading order bug
https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38041
2013-09-18 16:31:41 +00:00
John Crispin
8ff756cdc9 lantiq: fix up default firmware selection for spanish and italian routers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38039
2013-09-18 16:31:32 +00:00
John Crispin
1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin
cd668944ef lantiq: add wifi eep to a803 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
John Crispin
18b76c66fb lantiq: add a subtarget for the xrx200 SoC family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
2013-09-17 21:46:00 +00:00
John Crispin
0782501483 lantiq: update dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
John Crispin
94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
John Crispin
d13cbb04ad lantiq: add support for tplink images to .../image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
John Crispin
5001afdc37 lantiq: make the split patch recognize the tplink header
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
John Crispin
7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
John Crispin
e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
Luka Perkov
27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin
288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin
b4c722267e lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin
336c94c32d lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
2013-07-29 13:10:42 +00:00
John Crispin
c3b5ee96b9 lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
2013-07-29 13:10:37 +00:00
John Crispin
61e6be686f lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
2013-07-29 13:10:32 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
John Crispin
bfe65eaf7a lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
2013-07-25 20:54:51 +00:00
John Crispin
54b4074074 lantiq: add TP-Link TDW8970 image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
John Crispin
a2c5540727 lantiq: add profile for TP-Link TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
John Crispin
a99042c6a4 lantiq: add devicetree for TP-Link TDW8970
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
2013-07-25 20:29:15 +00:00
John Crispin
313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
John Crispin
a4d31c0353 lantiq: make macs loadable from mtd partitions
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
2013-07-25 20:29:05 +00:00
John Crispin
32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
John Crispin
4036be4408 lantiq: update pcie driver
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
2013-07-25 20:28:56 +00:00
Gabor Juhos
6a5b4ec7dc kernel: update 3.9 to 3.9.11
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
Felix Fietkau
fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
2013-07-15 11:06:07 +00:00
John Crispin
955662ec47 lantiq: apply [37258] also to the 3.9 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37317
2013-07-14 18:28:02 +00:00
John Crispin
93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
Luka Perkov
9de461f202 lantiq: etop enable gbit port0
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37191
2013-07-08 07:11:59 +00:00
Luka Perkov
1a3ad5a037 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
Luka Perkov
14b6674b39 lantiq: fix initramfs
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
John Crispin
fdfbac75c2 lantiq: xrx200_net compile fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37126
2013-07-02 09:34:45 +00:00
Jonas Gorski
0d9f760f27 kernel: update linux 3.9 to 3.9.8
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
John Crispin
124ef95f5f lantiq: add v3.9 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
John Crispin
bfc7007226 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
John Crispin
fe8ecbd972 lantiq: fix kernel config for DEU support
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
John Crispin
b4f36358ff lantiq: make xrx200 network driver use a tasklet for rx housekeeping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
John Crispin
aff84655f5 lantiq: remove 3.7 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
John Crispin
44b1688e6c lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
John Crispin
5d441ae7ea lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
John Crispin
81c57ec131 lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
John Crispin
76c79f50d7 lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
John Crispin
7638caf35d lantiq: make kernel_oldconfig
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36900
2013-06-10 08:25:07 +00:00
John Crispin
f7daed8b9a lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
John Crispin
e9ef65175d lantiq: revert [36779] as it caused a regression
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
2013-05-31 13:25:07 +00:00
John Crispin
e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
John Crispin
c2b1e9eeef lantiq: Fix ar8216 switch configuration
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
John Crispin
090a75447b lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
John Crispin
d1f3751d05 lantiq: wifi calibration from MTD
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
John Crispin
83c3cd4ed9 lantiq: postpone PCI and wifi init
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
John Crispin
b585923cc9 lantiq: fix LED-handling oversights
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
John Crispin
eb10f052ce lantiq: enable portmaps again and set max port to 2
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36573
2013-05-07 10:58:52 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
John Crispin
b42a173664 lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
John Crispin
520bf46375 lantiq: fix board detection helpers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
John Crispin
9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
John Crispin
d3d18ae812 lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
John Crispin
a46acc80e4 lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
John Crispin
46306c2e47 lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
John Crispin
d5f87e193c add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
John Crispin
fbc1e3732b add FE phy firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
John Crispin
0d32469457 add missing pinmux patch
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
John Crispin
d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin
a4c745ee74 add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
John Crispin
4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
John Crispin
0dbe4f502d fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
John Crispin
9b4a8c6d1e select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
John Crispin
0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
John Crispin
5452dbad61 build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
John Crispin
b98ae2b149 bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
John Crispin
3ab75692f3 move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
John Crispin
48a4b3a0cd fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
John Crispin
e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin
0b881eea72 unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin
a0f7a3c214 dont load gptu on ase
fixes #12792

SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
John Crispin
0de0955931 refresh patches
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
John Crispin
0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin
3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin
5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
Felix Fietkau
ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Gabor Juhos
c19c30cefd kernel: update linux 3.7 to 3.7.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
John Crispin
64910f4490 fixes USB reset on ARV7518
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
John Crispin
4834d09a3f fixes none-pci build
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
John Crispin
624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
John Crispin
ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
John Crispin
efe3225e2b ar9 did not load atm driver properly
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
John Crispin
379cd6e25e dont use input layer for gpio buttons
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
John Crispin
90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin
ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
John Crispin
9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin
3134205dfd minor tweaks to WBMR image
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
John Crispin
f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
John Crispin
861bf6af49 fix typo inside fritz3370 devicetree file
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
John Crispin
54c096527a more devicetree fixes
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
John Crispin
59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
John Crispin
7ce4c81647 add phy-reset gpio handling to xrx200-net
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
John Crispin
42d668174e add more lantiq phy ids based on daniels uboot code
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
John Crispin
16c5946f8b refresh patch and install v1.1 gphy blobs
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
John Crispin
1b0aaff246 adds a fix for ar8216 mii detection on etop driver
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
John Crispin
687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin
e472671bde fix gptu clocks
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
John Crispin
5495ffbfdf more board file fixes
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
John Crispin
4aa8272c8b fix gptu patch - tapi should now load
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
John Crispin
af48676b28 update to 3.7.1
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
John Crispin
7bcb6b5479 make pinctrl-falcon honour status="disbaled";
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
John Crispin
573cf13419 fix falcon profile
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
John Crispin
33d3433d75 fix i2c-lantiq module
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
John Crispin
b637eb598d add falcon devicetree files
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
John Crispin
3ca51b5399 select hcd as a default package for the dgn3500
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
John Crispin
85e4da7e23 EASY80920 has 2 usb ports
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
John Crispin
3dac521a49 remove 3.3 and 3.6
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
John Crispin
1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00