openwrtv3/target/linux/ar71xx/base-files/etc/uci-defaults/02_network

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#

[ -e /etc/config/network ] && exit 0

touch /etc/config/network

. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh

ucidef_set_interface_loopback

board=$(ar71xx_board_name)

case "$board" in
all0315n |\
all0258n |\
ja76pf2|\
ubnt-unifi-outdoor)
	ucidef_set_interface_lan "eth0 eth1"
	;;

ap132 |\
wlr8100)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

esr1750)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

ap136-010)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "5 6"
	;;

ap136-020 |\
ap135-020 |\
tl-wr1043nd-v2)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "5 6"
	;;

archer-c5 |\
archer-c7 |\
tl-wdr4900-v2)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "1 6"
	;;

db120 |\
rb-2011l | \
rb-2011uas |\
rb-2011uias |\
rb-2011uas-2hnd|\
rb-2011uias-2hnd)
	ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	ucidef_add_switch "switch1" "1" "1"
	ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 4 5"

	case "$board" in
	rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
		ucidef_set_interface_raw "sfp" "eth0.3"
		ucidef_add_switch_vlan "switch0" "3" "0t 6"
		;;
	esac
	;;

dir-825-b1|\
tew-673gru)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
	;;

nbg460n_550n_550nh)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
	;;

nbg6716)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "5 6"
	;;

rb-433 |\
rb-433u)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "1 2 5"
	;;

rb-435g)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2"
	;;

rb-450)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
	;;

rb-450g |\
routerstation-pro)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	;;

ap136 |\
rb-750gl |\
rb-751g |\
rb-951g-2hnd |\
wzr-hp-g450h)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

rb-951ui-2hnd)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	;;

rb-493g)
	ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	ucidef_add_switch "switch1" "1" "1"
	ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch1" "2" "0t 5"
	;;

wzr-hp-g300nh2 |\
pb92 |\
ap113)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 2"
	;;

el-m150)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 3"
	;;

el-mini)
	ucidef_set_interface_lan "eth0"
	;;

tl-wdr4300|\
tl-wr1041n-v2)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

tl-wr1043nd)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
	ucidef_add_switch_vlan "switch0" "2" "0 5t"
	;;

tl-wr2543n)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
	ucidef_add_switch_vlan "switch0" "2" "0 9t"
	;;

tl-wr841n-v1|\
tl-wr941nd)
	ucidef_set_interface_raw "eth" "eth0"
	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
	;;

smart-300 | \
tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
wnr2000-v3 |\
wnr2200 |\
wnr612-v2)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	;;

uap-pro)
	ucidef_set_interface_lan "eth0"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2"
	;;

nanostation-m-xw)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

wrt160nl)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 5"
	;;

wzr-hp-g300nh)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
	;;

dir-825-c1)
	local mac
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "0t 5"
	mac=$(mtd_get_mac_ascii nvram "wan_mac")
	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
	;;

mynet-n750)
	local mac
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "0t 5"
	mac=$(mtd_get_mac_ascii devdata "wanmac")
	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
	;;

dir-835-a1 |\
wndr3700v4 | \
wndr4300)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "0t 5"
	mac_lan=$(mtd_get_mac_binary caldata 0)
	[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
	mac_wan=$(mtd_get_mac_binary caldata 6)
	[ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan"
	;;

esr900)
	local mac
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
	ucidef_add_switch_vlan "switch0" "2" "0t 5"
	mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
	;;

all0305 |\
aw-nr580 |\
bullet-m |\
cap4200ag |\
eap300v2 |\
eap7660d |\
loco-m-xw |\
mr600 |\
mr600v2 |\
rb-411 |\
rb-911g-2hpnd |\
rb-911g-5hpnd |\
rb-912uag-2hpnd |\
rb-912uag-5hpnd |\
rb-sxt2n |\
rb-sxt5n |\
tl-mr10u |\
tl-mr11u |\
tl-mr13u |\
tl-mr3020 |\
tl-mr3040 |\
tl-mr3040-v2 |\
tl-wa750re |\
tl-wa850re |\
tl-wa830re-v2 |\
tl-wa801nd-v2 |\
tl-wa901nd |\
tl-wa901nd-v2 |\
tl-wa901nd-v3 |\
tl-wr703n |\
tube2h |\
wndap360 |\
mynet-rext |\
wp543)
	ucidef_set_interface_lan "eth0"
	;;

dir-505-a1)
	ucidef_set_interface_lan "eth1"
	;;

alfa-ap96 |\
alfa-nx |\
ap83 |\
gl-inet |\
jwap003 |\
pb42 |\
pb44 |\
routerstation|\
tl-wr710n |\
tl-wr720n-v3|\
wpe72)
	ucidef_set_interfaces_lan_wan "eth1" "eth0"
	;;

ap121 |\
ap121-mini |\
ap96 |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
dir-615-e1 |\
dir-615-e4 |\
hiwifi-hc6361 |\
ja76pf |\
mynet-n600 |\
oolite |\
rb-750 |\
rb-751 |\
tew-632brp |\
tew-712br |\
tl-mr3220 |\
tl-mr3220-v2 |\
tl-mr3420 |\
tl-wdr3500 |\
tl-wr741nd |\
tl-wr741nd-v4 |\
tl-wr841n-v7 |\
tl-wr841n-v9 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
wzr-hp-ag300h)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
	;;

wzr-hp-g450h)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
	ucidef_add_switch_vlan "switch0" "2" "0t 1"
	;;

ew-dorin)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
	ucidef_add_switch_vlan "switch0" "2" "0t 3"
	;;

ew-dorin-router)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 2 3"
	;;

wndr3700)
	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
	ucidef_add_switch "switch0" "1" "1"
	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
	uci set network.@switch[-1].blinkrate='2'

	ucidef_add_switch_port "switch0" "1"
	# Port 1 controls the GREEN configuration of LEDs for
	# the switch and the section does not correspond to a real
	# switch port.
	#
	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
	# 14: Link (master); 15: separate register
	uci set network.@switch_port[-1].led='6'

	ucidef_add_switch_port "switch0" "2"
	# Port 2 controls the ORANGE configuration of LEDs for
	# the switch and the section does not correspond to a real
	# switch port.
	#
	# See the key above for switch port 1 for the meaning of the
	# 'led' setting below.
	uci set network.@switch_port[-1].led='9'

	ucidef_add_switch_port "switch0" "5"
	# Port 5 controls the configuration of the WAN LED and the
	# section does not correspond to a real switch port.
	#
	# To toggle the use of green or orange LEDs for the WAN port,
	# see the LED setting for wndr3700:green:wan in /etc/config/system.
	#
	# See the key above for switch port 1 for the meaning of the
	# 'led' setting below.
	uci set network.@switch_port[-1].led='2'
	;;

*)
	ucidef_set_interfaces_lan_wan "eth0" "eth1"
	;;
esac

uci commit network

exit 0