openwrtv3/target/linux/ipq806x/base-files/lib/upgrade/platform.sh

. /lib/ipq806x.sh

PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1

platform_check_image() {
	return 0;
}

platform_pre_upgrade() {
	local board=$(ipq806x_board_name)

	case "$board" in
	ap148 |\
	d7800 |\
	nbg6817 |\
	r7500 |\
	r7500v2 |\
	r7800)
		nand_do_upgrade "$1"
		;;
	ea8500)
		linksys_preupgrade "$1"
		;;
	esac
}

platform_do_upgrade() {
	local board=$(ipq806x_board_name)

	case "$board" in
	c2600)
		PART_NAME="os-image:rootfs"
		MTD_CONFIG_ARGS="-s 0x200000"
		default_do_upgrade "$ARGV"
		;;
	ea8500)
		platform_do_upgrade_linksys "$ARGV"
		;;
	vr2600v)
		PART_NAME="kernel:rootfs"
		MTD_CONFIG_ARGS="-s 0x200000"
		default_do_upgrade "$ARGV"
		;;
	esac
}

platform_nand_pre_upgrade() {
	local board=$(ipq806x_board_name)

	case "$board" in
	nbg6817)
		zyxel_do_upgrade "$1"
		;;
	esac
}

blink_led() {
	. /etc/diag.sh; set_state upgrade
}

append sysupgrade_pre_upgrade blink_led
ipq806x: build images and add sysupgrade support for AP148 Add full ubi and sysupgrade images for AP148 and add sysupgrade support for ipq806x to allow updating the current installation. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46789 2015-09-04 14:45:00 +00:00			`. /lib/ipq806x.sh`

			`PART_NAME=firmware`
ipq806x: append metadata to images Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-11-14 16:32:04 +00:00			`REQUIRE_IMAGE_METADATA=1`
ipq806x: build images and add sysupgrade support for AP148 Add full ubi and sysupgrade images for AP148 and add sysupgrade support for ipq806x to allow updating the current installation. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46789 2015-09-04 14:45:00 +00:00
			`platform_check_image() {`
ipq806x: remove device specific sysupgrade image checks Replaced by image metadata Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-11-20 19:06:15 +00:00			`return 0;`
ipq806x: build images and add sysupgrade support for AP148 Add full ubi and sysupgrade images for AP148 and add sysupgrade support for ipq806x to allow updating the current installation. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46789 2015-09-04 14:45:00 +00:00			`}`

ipq806x: add platform_pre_upgrade for sysupgrade We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46945 2015-09-15 16:05:10 +00:00			`platform_pre_upgrade() {`
			`local board=$(ipq806x_board_name)`

			`case "$board" in`
ipq806x: fix sysupgrade for AP148 AP148 uses lowercase name as boardname, so we need to use this in platform.sh as well. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48304 2016-01-18 10:46:58 +00:00			`ap148 \|\`
ipq806x: Add support for Netgear D7800 Signed-off-by: Tathagata Das <tathagata@alumnux.com> SVN-Revision: 48360 2016-01-19 10:16:36 +00:00			`d7800 \|\`
ipq806x/nbg6817: add sysupgrade support Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net> 2016-10-25 06:40:36 +00:00			`nbg6817 \|\`
ipq806x: add initial support for Netgear R7800 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> 2016-06-21 09:55:00 +00:00			`r7500 \|\`
ipq806x: Build image for Netgear Nighthawk X4 R7500v2 Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 2016-08-19 20:56:24 +00:00			`r7500v2 \|\`
ipq806x: add initial support for Netgear R7800 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> 2016-06-21 09:55:00 +00:00			`r7800)`
ipq806x: add platform_pre_upgrade for sysupgrade We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46945 2015-09-15 16:05:10 +00:00			`nand_do_upgrade "$1"`
			`;;`
ipq806x: base-files: add support for Linksys EA8500 Signed-off-by: Adrian Panella <ianchi74@outlook.com> 2016-05-13 06:13:15 +00:00			`ea8500)`
			`linksys_preupgrade "$1"`
			`;;`
ipq806x: add platform_pre_upgrade for sysupgrade We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46945 2015-09-15 16:05:10 +00:00			`esac`
			`}`

ipq806x/base-files: Add support for Archer C2600 Signed-off-by: Ash Benz <ash.benz@bk.ru> 2016-05-27 14:26:42 +00:00			`platform_do_upgrade() {`
			`local board=$(ipq806x_board_name)`

			`case "$board" in`
			`c2600)`
			`PART_NAME="os-image:rootfs"`
			`MTD_CONFIG_ARGS="-s 0x200000"`
			`default_do_upgrade "$ARGV"`
			`;;`
ipq806x: base-files: add support for Linksys EA8500 Signed-off-by: Adrian Panella <ianchi74@outlook.com> 2016-05-13 06:13:15 +00:00			`ea8500)`
			`platform_do_upgrade_linksys "$ARGV"`
			`;;`
ipq806x: add support for TP-Link Archer VR2600v This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de> 2016-11-23 17:51:15 +00:00			`vr2600v)`
			`PART_NAME="kernel:rootfs"`
			`MTD_CONFIG_ARGS="-s 0x200000"`
			`default_do_upgrade "$ARGV"`
			`;;`
ipq806x/base-files: Add support for Archer C2600 Signed-off-by: Ash Benz <ash.benz@bk.ru> 2016-05-27 14:26:42 +00:00			`esac`
			`}`
ipq806x: add support for indicating the boot and upgrade state using four leds Signed-off-by: Henryk Heisig hyniu@o2.pl 2016-09-30 19:36:50 +00:00
ipq806x/nbg6817: add sysupgrade support Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net> 2016-10-25 06:40:36 +00:00			`platform_nand_pre_upgrade() {`
			`local board=$(ipq806x_board_name)`

			`case "$board" in`
			`nbg6817)`
			`zyxel_do_upgrade "$1"`
			`;;`
			`esac`
			`}`

ipq806x: add support for indicating the boot and upgrade state using four leds Signed-off-by: Henryk Heisig hyniu@o2.pl 2016-09-30 19:36:50 +00:00			`blink_led() {`
			`. /etc/diag.sh; set_state upgrade`
			`}`

			`append sysupgrade_pre_upgrade blink_led`