mirror of
https://github.com/nqrduck/nqrduck-spectrometer-limenqr.git
synced 2024-11-09 11:10:03 +00:00
49 lines
No EOL
2.6 KiB
Markdown
49 lines
No EOL
2.6 KiB
Markdown
# NQRduck Module: Spectrometer LimeNQR
|
|
This module is a part of the NQRduck project. It is a submodule of the [spectrometer module](https://github.com/nqrduck/nqrduck-spectrometer) for the NQRduck project. It is designed to be used with the [NQRduck](https://github.com/nqrduck) project.
|
|
|
|
The module provides a Graphical User Interface (GUI) for the control of the LimeSDR based spectrometer. It is designed to be used with the NQRduck project. The GUI is based on the [PyQt5](https://pypi.org/project/PyQt5/) library
|
|
|
|
The original code for the control of the LimeSDR based spectrometer was part of the paper by A. Doll; Pulsed and continuous-wave magnetic resonance spectroscopy using a low-cost software-defined radio. AIP Advances 1 November 2019; 9 (11): 115110. https://doi.org/10.1063/1.5127746. More information about the original code can be found in the [LimeDriver](https://github.com/nqrduck/limedriver) project.
|
|
|
|
The currently supported LimeSDR devices are:
|
|
- LimeSDR Mini v2.0 (probably also v1.x, but not tested)
|
|
- LimeSDR USB
|
|
|
|
## Installation
|
|
|
|
### Requirements
|
|
- [LimeSuite](https://wiki.myriadrf.org/Lime_Suite)
|
|
- [HDF5](https://www.hdfgroup.org/solutions/hdf5/)
|
|
|
|
You can find more information about the installation of dependencies in the [LimeDriver](https://github.com/nqrduck/limedriver) project.
|
|
|
|
Additional dependencies should be installed by the pyproject.toml file when installing this module.
|
|
|
|
### Setup
|
|
To install the module you need the NQRduck core. You can find the installation instructions for the NQRduck core [here](https://github.com/nqrduck/nqrduck).
|
|
|
|
Ideally you should install the module in a virtual environment. You can create a virtual environment by running the following command in the terminal:
|
|
```bash
|
|
python -m venv nqrduck
|
|
```
|
|
|
|
You can install this module and the dependencies by running the following command in the terminal after cloning the repositor and navigating to the module directory:
|
|
```bash
|
|
pip install .
|
|
```
|
|
|
|
Alternatively you can install the module via the PyPi package manager by running the following command in the terminal:
|
|
```bash
|
|
pip install nqrduck-spectrometer-limenqr
|
|
```
|
|
|
|
## Usage
|
|
The module is used together with the NQRduck [pulseprogrammer](htpps://github.com/nqrduck-pulseprogrammer) module.
|
|
|
|
|
|
### Notes
|
|
- When using the LimeSDR USB use the TX Matching: 0 and RX Matching: 0 for frequencies below 1.5GHz in the settings of the module.
|
|
- For the LimeSDR Mini 2.0 use the TX Matching: 2 and RX Matching: 2 for frequencies bellow 1.5GHz.
|
|
|
|
## License
|
|
This project is licensed under the MIT License - see the [LICENSE](LICENSE) file for details. |